Used Omc for sale (11)

Condition: good (used), Code: 0381 Brand: OMC - ITALY Model: PL/160 - CE Standard Hydraulic hot press with solid platens, heated by an electric oil boiler, for panels, veneer, woodworking, furniture, custom-made furnishings, wooden doors, composite materials, and various - CE Standard Platens dimensions 3500 x 1300 mm Solid steel perforated platens N°1 intermediate platen Max temperature 250°C Opening 400 mm N° 8 pistons - diameter 85 mm Specific working pressure 30/40 kg/cm² Total thrust 160 tons Heating by 3 diathermic oil boilers Safety devices: perimeter safety cable, emergency stop button, two-hand control Automatic opening with timer Control panel Motor 3 Hp Power supply: 400 V / 50 Hz Fjdey Nkuwopfx Aa Njpg Overall dimensions mm 4200 x 1600 x 2250 h Weight kg 5500

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 3,600 kg, Shelf length: 3000 mm Shelf width: 1300 mm Clearance: 400 mm 6 hydraulic cylinders Piston diameter: 85 mm Machine control via touch panel Built-in electric oil heating Electric time-controlled opening Safety breakaway cable Year of manufacture: 2025, NEW Control system: logic control Fpjdpfoy N Rczsx Aa Njg Overall dimensions: Length: 360 cm Width: 160 cm Height: 203 cm

Year of construction: 2021, condition: as good as new (ex-display), functionality: fully functional, Single-head cutting machine OMC GIOBI 600 with measuring roller conveyor FOM INDUSTRIE ASSOMAK VS 6m and inlet conveyor PORTER 4,2m Year 2021 Condition: ex-demo, like new - Saw blade D 600 mm - Hdro-pneumatic feed - Inclination is pneumatic on both sides, with fixed graduations of 22.5° - 45° - 90°. For intermediate gradations, with manual mechanical stop - 2 vertical and 2 horisontal clamps - Spray mist blade lubrication system - Integral pneumatic protection - ASSOMAK VS 6m: measuring roller conveyor with digital display and manual length stop positioning - Minimum cut 0 mm - Maximum cut 6000 mm - Measurement reading by encoder - Positioning precision ± 0,5 mm - Loading capacity per linear meter: 10 Kg - Width of bar resting surface: 200 mm - PORTER 4,2m: inlet roller conveyor - Loading capacity per linear meter: 10 Kg Fodpfx Asy Erwfoa Nopg - Width of bar resting surface: 200 mm

Year of construction: 2021, condition: new, Single-head cutting machine OMC RONDA 700, new Machine in stock - saw blade D 700 mm - hydro-pneumatic feed - inclination is pneumatic on both sides, with fixed graduations of 22.5° - 45° - 90°. For intermediate gradations, with manual mechanical stop - 2 vertical and 2 horisontal clamps - spray mist blade lubrication system - integral pneumatic protection Fedpfohrukisx Aa Nopg

Year of construction: 2021, condition: new, Single-head cutting machine OMC GIOBI 600, new Machine in stock - saw blade D 600 mm - hydro-pneumatic feed - inclination is pneumatic on both sides, with fixed graduations of 22.5° - 45° - 90°. For intermediate gradations, with manual mechanical stop - 2 vertical and 2 horisontal clamps - spray mist blade lubrication system - integral pneumatic protection Fpsdehrumajpfx Aa Neg

Condition: ready for operation (used), Year of construction: 2025, stroke length: 400 mm, This OMC PL 90s veneer press was manufactured in 2025. It features a plate size of 3000 x 1300 mm, an upward stroke of 400 mm, and a press force of 90 tons on 80% of the surface. Equipped with Elkom electronic heating plates, it ensures a maximum temperature of 120°C. The hydraulic system includes a two-stage unit with noise reduction and a fast closing/opening pump. Safety features include a safety cable, emergency button, and two-hand operation. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Plate size: 3000 x 1300 mm • Stroke type: upward stroke (from bottom to top) • Plate type: elkom electronic plates • Press force: 90 tons on 80% of the surface • Press cylinder: 6 x Ø 70 mm • Specific pressure: 2. 05 kg/cm² on 100% of the surface, 2. 56 kg/cm² on 80% of the surface • Loading and unloading side: 3000 mm • Heating system: electronic 25. 4 kw, maximum temperature of 120°c • Automatic opening with timer Extra Information Hydraulic System Two-stage unit with submersible pump for noise reduction and lubrication of rotating parts. Fast closing/opening pump (high flow rate - low pressure 35 l/min), press pump (low flow rate - high pressure 1.6 l/min). 2 HP Electric Motor Control/Safety Valves: Maximum pressure valve, pressure retention valve (check valve), valve for low drain pressure (pre-drain valve), and oil drain magnetic valve. Control Panel and Electrical System 2 Temperature regulators for setting the plate temperature Pressure gauge for pressure regulation with automatic pressure equalization system General on/off switch Two manual safety buttons for closing the press Timer for automatic opening Switch to select manual or automatic opening of the platens after the work cycle Off/on switch for upper and lower platen resistance Safety Systems Timed bimanual control for closing the press Safety rope on all four sides of the press Platen lock for maintenance Protective guards for the pinion and rack units Safety stickers and warning notices Operating and maintenance manual Complies with CE standards Press Structure Made of composite and welded steel Equipped with a rack and pinion guide system for perfect parallel movement during closing/opening of the plates. Elkom Heating Plate Electric plates with electric resistors Consist of a chipboard with an aluminum sheet mounting electric resistors Fpodpfjyalmbjx Aa Nsg Maximum Working Temperature: 120°C Maximum Thrust: 7 kg/cm²

Condition: used, machine/vehicle number: 007346, Max working length: 3500 mm Max working width: 1300 mm Heating System: electric Pressure Exerted: 2.35 Kg/cm2 Fjdpfev Akwgjx Aa Nepg No of Pressing cylinders: 8

Condition: new, Year of construction: 2023, pressing force: 120 t, total length: 3,000 mm, total width: 1,300 mm, operating temperature: 120 °C, cylinder diameter: 85 mm, opening width: 400 mm, Good morning, We offer for sale a brand new shelf press manufactured by the Italian company OMC model PL 105 Logic Control 30/13 To begin with, some useful information about the machine: * working area 3000x1300mm * opening width 400mm * 6 cylinders with a diameter of 85mm * total pressure of 105 tons * maximum heating temperature 120 degrees * logic control system * machine control from touch panel * readings of temperature, pressure force, shelf opening time, loading area calculator, programming of gluing processes - we will set it all from the panel * power 21KW * CE certificate * 2023 year of production * heating medium: oil with built-in heater. Fpedpfx Aasqu U Hqe Njg Machine brand new, available from stock.

Condition: new, Year of construction: 2022, OMC 3000×1300 105T Oil Shelf Press Working surface 3000x1300mm Opening width 400mm 6 cylinders with a diameter of 85mm Total pressure 105T Maximum heating temperature of 85 degrees Control system logic contorl Fsdsimwp Sepfx Aa Njpg Machine control from touch panel readouts Temperature, pressure force, shelf opening time, loading area calculator, glue process programming Power 21KW CE certificate Production 2022 Machine available on request New machine

Condition: new, Year of construction: 2023, OMC PL 105 LC 30/13 Water-based veneering press Working surface 3000x1300mm Opening width 400mm 6 cylinders with a diameter of 85mm Total pressure 105T Fpedoiypzljpfx Aa Nsg Maximum heating temperature of 85 degrees Control system logic contorl Machine control from touch panel readouts Temperature, pressure force, shelf opening time, loading area calculator, glue process programming Power 21KW CE certificate Production 2023 Machine available on request New machine

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, We have a production line for UPVC profiles, they were purchased in 2010, they have only operated for 2 years, and now they are for sale because the company that had them has now closed. They were serviced before being stored. The machines are in Patras, Greece. Any operational check is welcome. (1) Aluminium and UPVC end milling machine OMC Maxima, (new never connect) (2) CNC automatic line UPVC CNC corner cleaning machine with 4 head horizontal welder - RISUS, RKT-8000 Fpsdpfowyvh Rox Aa Neg (3) UPVC bead saw - RISUS, RK-1080 (4) UPVC 4 Head vertical welder - HAYA, (5) UPVC 4 Head corner cleaning machine semi-automatic - WEGOMA, WPA4 (6) Single Head multiple corners welder machine -RISUS, RYL-1050 (7) UPVC profile Hot air bender /CBM, (8) 4 Machine benches, (9) ACCESSORIES SMALL TOOLS AND DIES (milling cutters for the machines, chisel etc.). There are spare parts available , as well as technical assistance, if needed. The selling price for all these machines together is at least 50,000 Euros plus VAT, if necessary. They do not sell independently. Collection from Patras, Greece (we have a fork lift truck to help if need)