Used Okuma Lb 9 for sale (183)

Condition: repair required (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: MW144, Technical characteristics: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse in X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse in Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse in Z: 24 m/min Main Spindle - Spindle nose: A2-8 - Maximum speed: Left 3000 rpm - Power at 100% duty cycle: Left – 15 kW / Right – 7.5 kW - Maximum swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle – 80 mm / Right spindle – 53 mm Sub-Spindle: - Spindle speed: 6000 rpm - Maximum bar diameter: 53 mm - C-axis indexing accuracy: 0.001° - Travel: 520 mm Tool Turret with Driven Tools - Tool interface: Okuma interface - Number of stations: 12-position lower servo turret, all stations driven - Maximum speed: 4500 rpm - Milling motor power: 4.5 kW Electrical Equipment - Mains voltage: 400V 3-phase - Connected load: 22.5 kVA Dimensions - Machine dimensions (L×W×H): 3200 × 2200 × 1900 mm - Weight: 5500 kg Main Features and Capabilities: - Horizontal design: optimized chip evacuation, parts catcher + custom parts conveyor belt - CNC control: OSP-P300L-R Cjdpfexxidajx Addsaa - Chip conveyor - Fire protection system - Tool measurement system (Q SETTER) - Broken tool detection: Load monitoring and automatic force analysis via OSP-P300L-R - Workpiece detection at sub-spindle: Low-pressure compressed air monitoring - Spindle cooling system - Documentation: Electronic / Hard copy available OPTIONAL Bar feeder: TOP Automazione, model FU 352 - Bar feeder (L×W×H): 3500 × 800 × 1200 mm; Weight: 1500 kg Machine Condition: NOT WORKING - Turret disassembled for repair - X-axis ballscrew to be replaced - Heat exchanger / lubrication unit to be replaced - Hydraulic unit to be replaced - Sub-spindle to be repaired - Spindle position encoder to be replaced - Chip conveyor to be repaired - Set of bar clamping guide and accessory kit - Set of bearings for pusher head

Condition: good (used), Year of construction: 1999, functionality: fully functional, Okuma Macturn 30 1SW 1000, OSP 7000M, chip conveyor, ATC 24 BT40, coolant pump 8 bar, gear milling option, approx. 12,500 spindle hours, HS Big Bore, GS Standard Bore Neff The Okuma specialist and NeffBuy Caodpjvta Rkefx Addoa We are also happy to provide you with the all-round carefree package, a tour of our showroom (30 Okuma machines) including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as instruction and subsequent service. Bjsvkhv0lno We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit us on our homepage.

Condition: good (used), Year of construction: 2002, Ref. -No.: 10434 Manufacturer: OKUMA Type: LC 40 Year of construction: 2002 Type of control: CNC Control: FANUC 18-i TB Storage location: Halberstadt Country of origin: Germany Turning Speeds: 10 - 2.800 RPM Bar passage: 91 mm Chuck diameter: 450 mm Tailstock - diameter: 120 mm Turning Diameter: 550 mm Turning Length: 800 mm Swing Diameter: 800 mm Spindle passage: 90 mm Spindle nose: A2-8 Tailstock Quill Stroke: 150 mm Total Power Requirement: 44 kW Weight Of The Machine Ca.: 8 t Number of tool stations: 12 pc Cjdpfx Ajxxn U Roddeaa

Condition: used, Year of construction: 1998, controller manufacturer: Okuma, controller model: OSP7000L, _____ Description: Year of manuf. : 1998 Control : Okuma OSP7000L Turning diam. : 340 mm Turning length : 250 mm Mainspindle: Technology:Motorspindle Speed:4.500 rpm Power (max.):22 kW Barcapacity:65 mm Workpiecemeasurement:3-Jaw chuck, Kitagawa B-210 Toolcarrier I (X/Z): Technology:Turret with 12 Stations Taper:VDI40 Movement in X/Z:260/640 mm Rapid travers in X/Z:15/20 m/min Toolcarrier II (X/Z): Technology:Turret with 12 Stations Taper:VDI40 Movement in X/Z:140/615 mm Rapid travers in X/Z:15/20 m/min Equipment/Accessory: Cedpoxxftwjfx Addeaa Chipmanagement:Chip conveyor :Coolingmanagement:; Coolant pump Toolmeasurement:Automatic Measuringarm Further Equipment:Trafo

Year of construction: 2005, condition: excellent (used), Okuma MB-46 VAE 2005 - max. machining dimensions 760x460 mm - max. loading weight 700 kg - table dimensions 1000x460 mm - travels X= 762, Y= 460, Z= 460 mm - distance table-spindle 150-610 mm Caedpfxeh If Spo Addea - max. speed 15.000 rpm - tool capacity: 32 - tool holder SK 40 spindle makes noise ( videos available)

Year of construction: 2012, operating hours: 6,140 h, condition: ready for operation (used), Control Unit Brand OKUMA Model OSP P200LAR Codpfx Aoxwqtgjddeaa Main Drive Number of axis 3 This 3-axis Okuma L300 E-M was manufactured in 2012. It features live tools and an ASA8 spindle, with a generous distance between points of 1000mm. Ideal for those looking to enhance their horizontal turning capabilities. Contact us for more information about this machine. Application Types Turning

Condition: repair required (used), Year of construction: 2015, functionality: not functional, machine/vehicle number: MW137, Technical characteristics: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse in X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse in Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse in Z: 24 m/min Main Spindle - Spindle nose: A2-8 - Maximum speed: Left 3,000 rpm - Continuous power (100% duty cycle): Left - 15 kW / Right - 7.5 kW - Maximum swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle - 80 mm / Right spindle - 53 mm Csdpfx Aoxxh Udeddoaa Counter-Spindle - Spindle speed: 6,000 rpm - Maximum bar diameter: 53 mm - C-axis indexing accuracy: 0.001° - Travel: 520 mm Tool Turret with Driven Tools - Tool interface: Okuma interface - Number of positions: 12 lower turret stations, all driven - Maximum speed: 4,500 rpm; Milling spindle power: 4.5 kW Electrical Equipment - Operating voltage: 400V (3-phase), fuse protection: 151A - Connected load: 22.5 kVA Dimensions - Machine dimensions (L×W×H): 3,200 × 2,200 × 1,900 mm; Weight: 5,500 kg Main Features and Capabilities: - Horizontal design: Optimal chip evacuation, parts catcher + custom-made conveyor belt - Additional emulsion tank with 10 bar pressure for cutting tool cooling - CNC control: OSP-P300L-R - Swarf (chip) extraction conveyor - Fire suppression system - Tool measuring system (Q SETTER) - Broken tool detection: Load monitoring with auto-learning analyzer via OSP-P300L-R - Workpiece detection on counter-spindle: Low-pressure compressed air gauges - Spindle cooling system - Documentation: Electronic and print manual available Optional: - Bar feeder: FMB Model: Turbo 10-72XT/3200/A - Bar feeder dimensions (L×W×H): 3,500 × 800 × 1,200 mm; Weight: 1,500 kg Machine status: NOT OPERATIONAL - X-axis encoder: faulty

Condition: good (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 780 mm, travel distance Z-axis: 780 mm, total height: 31,500 mm, Equipment: documentation/manual, rotational speed infinitely variable, Dear customer, we have an Okuma MA 500 HB 6APC in good condition in stock for you. We look forward to your inquiry and remain with best regards, Your Neff - The Okuma Specialist Team Cedpfxsvta Sbe Addeaa Data sheet: Control: OSP P200-M Travel paths X-axis: [mm] 900 Y-axis: [mm]: 780 Z-axis: [mm]: 780 B-axis: [degrees] 1; 360 degree incrementation Tool changer 200 ATC MAS BT50 Tool positions: 200 Tool holder: MAS BT50 Maximum tool weight: [Kg] 500 Maximum tool length: [mm] 450 Main spindle Max. speed: [1/min] 6,000 Drive power: [kW] 33 Pallet station 6 APC Pallet dimensions: [mm] 500×500 Workpiece weight: [Kg] 950 Workpiece size: [mm] 800×1000 Other features: – Renishaw Probe – Renishaw Tool Break Control – Mayfran Concept with high pressure pump Neff The Okuma specialist and NeffBuy We are also happy to provide you with the all-round carefree package, viewing in our showroom including demonstration and Acceptance, loading, transport, assembly and commissioning of the machine as well as instructions and subsequent service. We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit our homepage.

Condition: used, Year of construction: 2000, x-travel 560 mm y-travel 560 mm z-travel 625 mm control OSP-U100M Fanuc spindle speeds 15000 U/min Cjdpfxjxyaccs Addoaa spindle drive 15/11 kW rapid travel x/y/z 30 mm/min Number of tool station 40 SK40 Pallet dimension 2 x 400x400 mm table load 0,4 t table index 1 ° total power requirement 49 kVA weight of the machine ca. 11 t dimensions of the machine ca. 3,2 x 2 x 2,5 m Control OSP-U100M (Fanuc), 60 tool stations, it has trough spindle coolant, chip conveyor and two paletts.

Condition: good (used), Year of construction: 2003, machine/vehicle number: 103848, travel distance X-axis: 210 mm, travel distance Y-axis: 330 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 40 rpm, turning diameter: 330 mm, total length: 5,000 mm, total height: 2,400 mm, total width: 1,600 mm, overall weight: 6,500 kg, OKUMA LVT300-M Vertical CNC Lathe Serial Number: 103848 Swing diameter over bed: 320 mm Max. turning diameter: 280 mm Max. workpiece length: 200 mm Travel distances: X-axis: 210 mm Y-axis: 330 mm C-axis (indexing): 360° Spindle speed: 40–4000 rpm Spindle bore: 62 mm Number of tool positions in turret: 12 Turret can accommodate driven tools Important note: The tool holders (including tools) and the chuck visible inside the machining area are not included in the sale or delivery. Cedpfoxw Uawox Addjaa The chip conveyor is included in the sale and delivery, but not the pallets located on the conveyor. The three pallets shown at the end of the photos are included in the sale and delivery. Any oil mist extraction system visible in the photos is not included in the sale and delivery. Control: OKUMA OSP-U100L Length of chip conveyor: approx. 3500 mm Manufacturer: EWA-B Type: PS800 Year of manufacture: 2003 Machine number: 5746-01-358509.3 The technical documentation was not photographed but will be supplied with the machine. DIMENSIONS & WEIGHT: Dimensions (L x W x H): 5000 x 1500 x 2400 mm Weight: approx. 6500 kg

Condition: excellent (used), Year of construction: 2013, operating hours: 1,800 h, functionality: fully functional, turning diameter over cross slide: 650 mm, turning length: 1,750 mm, turning diameter: 650 mm, spindle bore: 375 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 5 rpm, travel distance X-axis: 470 mm, travel distance Z-axis: 2,040 mm, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 10 m/min, Okuma CNC Oil Country Hollow Spindle Lathe Model: LOC 650 Control: Okuma OSP P300L Year: 2013 Max Swing Over Bed: 1030mm Max Turning Dia: 650mm Spindle Bore: 375mm Spindle Speeds: 5-500 RPM Double Air Chucks 850mm Dia 12 Station Upper Turret Cedpfexzi D Sox Addjaa Swarf Conveyor Coolant System

Condition: ready for operation (used), Year of construction: 2003, Control Unit Interface HSK 63 Brand OKUMA Model OSP-100L Main Drive Number of axis 5 Tools Cjdpfx Adexwqwledeaa Number of index 40 Max tool length 1500 mm Additional Equipment Autodoor This 5-axis Okuma MacTurn 350 was manufactured in 2003. It features an HSK 63 tooling system and can accommodate up to 40 tools. The machine includes an autodoor and supports a turning length of 1500 mm. Consider the opportunity to buy this Okuma MacTurn 350 Turn-mill centre machine. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 2005, CNC Horizontal Machining Center OKUMA MA-400H (Year 2005) Condition: Good, the machine is connected and can be seen in operation. Manufacturer: OKUMA Corporation (Japan) Model: MA-400H Year of manufacture: 2005 Cedsxql Dajpfx Addeaa Scope of supply: Complete with Tsubakimoto / Mayfran Inc. chip conveyor and full assembly system. High-class CNC horizontal machining center designed for precise milling, drilling, and tapping of metal parts. An excellent choice for series production where performance, accuracy, and reliability are critical. Main technical specifications: (based on OKUMA MA-400H model specification) Control system: OKUMA OSP-E100H Working travel (X / Y / Z): 560 × 560 × 625 mm Table: 400 × 400 mm (2-position pallet changer) Max. workpiece diameter: 630 mm Max. workpiece height: 900 mm Max. table load: 400 kg Spindle speed: up to 15,000 rpm Spindle taper: BT40 Spindle motor: 15/11 kW Tool changer: 60 positions (automatic) Chip conveyor: Tsubakimoto / Mayfran Inc. – integrated Cooling: integrated cooling system Approximate weight: 11,000 kg Application: The OKUMA MA-400H is intended for the machining of medium and high-precision components in the automotive, mold, tooling, machine-building, and metal industries. Ideally suited for versatile machining – with automatic pallet changing, it enables operator-free production. If you have any further questions, please feel free to contact us.

Condition: used, Year of construction: 2003, machine/vehicle number: 247078, Max. turning diameter: 630 mm Max. machinable diameter: 630 mm Max. distance between centers: 900 mm Travel: X-axis: 580 mm (+480 / –20 mm) Z-axis: 935 mm Caedpjxtn Erjfx Addja Y-axis: 160 mm (+80 / –80 mm) C-axis: 360° (in 0.001° increments) B-axis: 225° (–30° / +195°; in 0.001° increments) Spindle speed: 50 – 5,000 rpm Tailstock type: NC-controlled, MT5 Spindle nose: A2-8 Spindle bore: Ø 80 mm Spindle bearing diameter: Ø 120 mm Turret type: H1-ATC Tool holder: HSK-A63 Number of stations: 1 Tool magazine capacity: 40 tools Tool size: 25 × 25 mm Shank diameter: Ø 32 mm Max. tool diameter: Ø 90 mm Max. tool length: 300 mm Max. tool weight: 8 kg Driven tool power (5 min / continuous): VAC 11 / 7.5 kW Milling spindle speed: 50 – 6,000 rpm Milling spindle torque (5 min / continuous): 65.7 / 44.8 Nm Feed rate: 0.001 – 1,000 mm/rev Rapid traverse: X-axis: 40 m/min Z-axis: 40 m/min Y-axis: 26 m/min C-axis: 200 rpm B-axis: 30 rpm Spindle motor power (30 min / continuous): OKUMA PREX 15 / 11 kW Spindle motor torque (10 / 20 min / continuous): 412 / 281 Nm Feed axis motor power: Z-axis: OKUMA BL 2.8 kW X-axis: OKUMA BL 3.5 kW Y-axis: OKUMA BL 2.9 kW W-axis (tailstock): OKUMA BL 2.9 kW Coolant pressure through milling spindle: 20 bar Coolant pump capacity: 0.8 kW Machine dimensions (L × W × H): 4,035 × 2,257 × 2,587 mm Machine weight: 10,000 kg Control system: OKUMA OSP-P300SA Display: 15" touchscreen (OSP Suite)

Condition: used, turning diameter over bed 460 mm turning length 1250 mm Cedpfjxwp Ebex Addjaa centre height 230 mm centre distance 1250 mm spindle turning speed range 35 - 1800 U/min weight of the machine ca. 2,7 t Accessories: 3-jaw chuck 250 mmø, MULTIFIX-head with 3 inserts, solid steady

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, turning length: 1,000 mm, turning diameter: 340 mm, Machine type: CNC lathe Manufacturer: Okuma Type: LU15-M Year of manufacture: 2000 Control: OSP-U100L Country of origin: Japan Delivery time: from stock Long turning length - 1000 mm Towable tailstock - automatic G152 Partial hollow clamping device The lathe is in very good condition. The basic and additional equipment enables this used machine to process long turning lengths of up to 1000 mm. Effective production is also possible thanks to the towable tailstock - automatic, the tool breakage / wear control, the partial hollow clamping device, the K pump and the dialog programming (IGF). An optimal machine for economical and reliable production. The machine is user-friendly and can be integrated into production immediately. Machine equipment Spindle motor VAC built 22/15 kW Long turning length – 1000 mm Towable tailstock – automatic G152 3-jaw chuck Forkardt, diameter 250 mm Steady preparation B-turret Partial hollow clamping device Dialog-IGF K-pump Tool breakage/wear control Chip conveyor Technical data Max. turning diameter: 340 mm Max. turning length: 1000 mm Travel X-axis: upper 260 mm (170+90); lower 140 mm (90+50) Travel Z-axis: upper 1,040 mm; lower 1.015 mm C-axis travel: 360° Spindle – number of travel steps: 2 – automatic Bore diameter: 62 mm A-turret (upper): 12 tools, all M-tool compatible, VDI 40 B-turret (lower): 8 tools, VDI 40 Rotating tool speed: 45~4500 min -1 Rapid feed: m/min X:15, Z:20, C:200 min -1 Tailstock quill diameter: 90 mm Tailstock quill stroke: approx. 100-120 mm Machine dimensions without accessories LxW: approx. 4800 x 2200 mm Codpfxox Afz Ao Addjaa Machine height: approx. 2030 mm Weight: approx. 6900 kg Optional Transport organization and implementation Machine delivery and installation Machine commissioning and production-ready handover

Condition: excellent (used), Year of construction: 2013, operating hours: 1,719 h, functionality: fully functional, feed length X-axis: 470 mm, feed length Z-axis: 2,040 mm, feed rate X-axis: 5 m/min, feed rate Z-axis: 10 m/min, turning diameter over cross slide: 650 mm, turning diameter: 1,030 mm, spindle bore: 375 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 5 rpm, overall weight: 23,000 kg, Okuma CNC Oil Country Hollow Spindle Lathe Model: LOC 650 Control: Okuma OSP P300L Year: 2013 Max Swing Over Bed: 1030mm Max Turning Dia: 650mm Spindle Bore: 375mm Spindle Speeds: 5-500 RPM Double Air Chucks 850mm Dia Csdpfx Adsxzgkijdoaa 12 Station Upper Turret Swarf Conveyor Coolant System

Condition: ready for operation (used), Year of construction: 2005, Main Drive Number of spindles 1 Spindle speed range 4000 Spindle motor power 22/15 kW Tool taper VDI 40 Number of axis 2 Movement X-Axis Rapid Traverse 60 m/min Z-Axis Rapid Traverse 30 m/min Workpiece Workpiece drm 280 mm Workpiece X 320 mm Tools Number of index 12 This Okuma LVT 300 was manufactured in 2005. A robust vertical turning machine featuring a max. turning diameter of 280 mm and a swing diameter of 320 mm. It offers a rapid traverse rate of 60 m/min on the X-axis and 30 m/min on the Z-axis, with a turning speed range up to 4000 U/min. Ideal for efficient, precise operations, the machine includes 12 tool positions. A great opportunity to buy this Okuma LVT 300 vertical turning machine. Contact us for more information. Caedpfx Aoxtgnfeddea Application Types Turning

Condition: used, Year of construction: 2005, For sale: CNC Machining Center OKUMA ACE CENTER MD-56VA (2005) Condition: Good, fully functional. Manufacturer: OKUMA Corporation (Japan) Model: ACE CENTER MD-56VA Codpfxexp Utbs Addoaa Year of manufacture: 2005 Reliable vertical CNC machining center designed for precise milling, drilling, and tapping of metal components. OKUMA is one of the most renowned Japanese manufacturers, known for the precision and durability of its machine tools. Main technical specifications (according to MD-56VA model): Control: OKUMA OSP-E100M Travel: X = 1050 mm / Y = 560 mm / Z = 460 mm Table size: 1300 × 560 mm Max. table load: 800 kg Spindle speed: up to 15,000 rpm Spindle taper: BT40 Tool changer: 20 positions (automatic) Spindle motor: 15/11 kW (continuous/rated power) Power supply: 400 V / 50 Hz Cooling system: integrated Approx. weight: 7,000 kg Application: The OKUMA MD-56VA CNC machining center is designed for high-precision metal parts production: - Mechanical components - Molds and tools - Machining of aluminum, steel, and non-ferrous metals Ideally suited for precision manufacturing and small to medium series where accuracy and repeatability are crucial. If you have any further questions, please feel free to contact us.

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 760 mm, table load: 500 kg, spindle speed (max.): 15,000 rpm, TECHNICAL DETAILS X-axis travel: 760 mm Y-axis travel: 760 mm Z-axis travel: 760 mm Cajdpfxsxvq Hde Addoa Spindle center to table surface: 50 to 810 mm Spindle end to table center: 135 to 895 mm Table size: 500 x 500 mm Max. load capacity: 500 kg Index positions: 360 Speed range: 50 to 15,000 rpm Number of speed ranges: stepless Taper: NT No. 40 Spindle diameter: 70 mm Feed Rapid traverse (X/Y/Z): 60,000 mm/min Manual feed (X/Y/Z): 1 to 60,000 mm/min Tool changer Tool holder: Standard MAS BT40 Magazine capacity: 48 stations Max. tool diameter (adjacent positions occupied): 70 mm Max. tool diameter (adjacent positions free): 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg MACHINE DETAILS Total power requirement: 43 kW Dimensions & Weight Space requirement: 2.7 x 4.73 x 2.87 m Machine weight: 11.5 t

Condition: like new (used), Year of construction: 2022, operating hours: 930 h, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 360 mm, controller manufacturer: Okuma, controller model: OSP P300MA + 3D kit, workpiece weight (max.): 350 kg, table width: 760 mm, table length: 460 mm, overall weight: 7,000 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 930 h, spindle motor power: 15,000 W, spindle nose: HSKA63, number of slots in tool magazine: 20, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, High precision Die/Mold vertical CNC, actively cooled frame & spindle. 0.1um control, 4 digits after the decimal point. Full options, including Renishaw, air on the spindle, laser measurement etc. See attached PDF for a detailed list including software options and accessoires! Cleaned and ready for installation. All checks allowed (at buyers expense, machine stored in warehouse, 380v available), we can ask Okuma to make a test report if required. Free loading on truck. Transport can also be arranged in the EU. As new condition, 930 hours on spindle, new 300.000 euro's, so a 125.000 saving on an as-new machine with Cedowzzrkopfx Addsaa

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Dear Sir or Madam the details of the Okuma Multus B400 with main and counter spindle tool magazine HSK 63 with 80 places 1500mm turning length main spindle passage 100mm Csdpetdg Evofx Addjaa CNC turning/milling center with CNC control OKUMA OSP P200L Enlarged main spindle Ø110mm Ø150/110mm, spindle nose size 11 Speed range 38-2800 1/min. Counter spindle as W-axis incl. hollow clamping device with Ø70mm bore in the draw tube helical interpolation also for thread milling Tool height correction in Y-axis for turning tools Extension kit "M "OSP P200L (Kit One-Touch IGF-M-D) Software multifunction tool for the use of special tools 80-station tool changer instead of 20 stations C-axis synchronization software for simultaneous control of both C-axes Increased speed 10,000 rpm for driven tools 20/14 kW, max. 85 Nm Interlit ISF 540/6670 slat-band chip conveyor with integrated coolant tank Interlit SPB4 gravity belt filter with 900 L clean tank Supply pump TH 90/690 FSI frequency-controlled pump for gravity belt filter SPB 4 Manual rinsing gun for attachment to additional coolant tank SPB4 SMW VNK 250/110 Power clamping cylinder for hollow sp. m. Bore Ø 110.5 mm Chuck Rota THW Plus 315-104 A11 Cylinder SMW VNK 250/110 2-stage clamping pressure for power clamping device Call by program Door automation Multus B 400 Open/close via M command two doors, both open simultaneously Chuck Rota THW Plu 315-104 A8 Cylinder SMW VNK 225/95 mounted. Year of construction: 2011 Commissioning: June 2011 Warranty: A warranty for the used machine is excluded altogether. However, HAF Präzisionstechnik assures that defects, including hidden defects, are not known. Unknown defects can therefore not be excluded. Machine is under power and in very good condition. Viewing is possible by arrangement. We are also happy to process your acceptance parts in advance.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, turning length: 600 mm, turning diameter: 370 mm, Machine Type: CNC Turning Machine Caedpfoxz Eqbex Addja Manufacturer: Okuma Model: LU300-2ST Year of Manufacture: 2005 Control: OSP-E100L Availability: In stock Machine Equipment: - Parts conveyor belt and collection tray – workpiece chute with removal conveyor, including electrical kit - 2 turret disks with VDI40 (12 + 8 stations) - Power chuck cylinder for hollow spindle – pull tube bore 52 mm - Expansion kit “D” – Kit one-touch IGF-D - Chuck open/close while spindle is running via M-code - Reinforced coolant pump 8 bar - Coolant can be switched on/off at turret A and B via M-function - Interface for bar feeder connection - Chip conveyor Technical Details: - Swing over bed: 530 mm - Swing over cross slide: 380 mm - Distance between centers: 600 mm - Max. turning diameter: 370 mm - Max. turning length: 600 mm - X-Axis travel: upper 260 mm / lower 140 mm - Z-Axis travel: upper 640 mm / lower 615 mm - Rapid traverse X-Axis: 20,000 mm/min - Rapid traverse Z-Axis: 25,000 mm/min - Spindle speed: 45 ~5,000 rpm - Spindle bore: 62 mm - 2 tool turrets: upper 12 stations, lower 8 stations - Spindle power: 22/15 kW - Machine dimensions (L x W): approx. 2950 x 2050 mm - Machine height: approx. 2010 mm - Weight: approx. 6,500 kg Options: - Organization and execution of transport - Machine installation and placement - Machine commissioning

Year of construction: 2022, operating hours: 1,790 h, condition: ready for operation (used), Main Drive Spindle speed range 50 - 6000 Casdpfx Adsxuawcjdoa Spindle motor power 11.5 kW Spindle bore 62 mm Number of axis 2 Additional Equipment Automation: Samsys short bar loader Extra Features: High-pressure pump & tank, high-pressure seal kit, workpiece removal arm, tool height correction in the Y-axis, coolant tank and pumps, detachable wired handwheel, tool monitoring, programmable face printing, and Hi-Cut Pro for driven tools two BMT55 revolvers with 16 stations each This Okuma LT2000-2T1MY was manufactured in 2022. It features two 22KW spindles, a 32-station BMT55 turret, and an OSP-P300LA control system with OSP and ECO suites. It includes a Samsys short bar loader, high-pressure pump, and tank. The machine offers 4-axis machining capabilities with Y-axis in the upper turret and is equipped with a 15" color LCD TFT multi-touch screen. If you are looking to get high-quality turning capabilities consider the Okuma LT2000-2T1MY machine we have for sale. Contact us for more information. Application Types Turning

Condition: excellent (used), Year of construction: 2007, Okuma MB-46VAE Machining Center Year of manufacture: 2007 Control: OKUMA OSP P200-M Table size: 1000 x 460 mm X travel: 762 mm Y travel: 460 mm Z travel: 460 mm Table load capacity: 700 kg Spindle cooler Taper: MAS BT40 Magazine with 42 tool stations Csdjxwtp Dopfx Addoaa Weight: 6500 kg Dimensions LxWxH = 2750 x 2160 x 2715 mm