Used Optical Sorter for sale (2,073)

Condition: used, Year of construction: 2001, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defecting mode. This machine is ideal for precise solid wood cutting, featuring automated detection and elimination of material defects. Technical specifications: Model: OptiCut S75-4 Manufacturer: GreCon Dimter Year of construction: 2001 Commission no.: 0682-10 Rotary current: 400 V / 50 Hz Control voltage: 230 VAC / 24 VDC Nominal output: 11 kW Kedpjwtgcxefx Adwswt Fuse protection: 25 A Condition: used

Condition: used, Used PET Bottle Recycling Line. Approximately 2,000 kg/hour (4,400 lbs/hour) input, producing about 1,700–2,000 kg/hour (3,750–4,400 lbs/hour) of clean PET flakes depending on feedstock quality and operating conditions. The line was built in 2011-2012. Originally designed for processing post-consumer PET bottles into clean PET flakes. Includes bale breaking, bottle sorting, size reduction, hot and cold washing, polymer separation, flake sorting, and bagging. Main Equipment Includes: Infeed conveyor Bale breaker Metering screw conveyors Star screen classifier Vibrating chute (2) Sesotec optical bottle sorters (4) Collecting conveyors Cutting mill (Model KSM 800-1530) Friction washers Kwjdpow U A Ixjfx Adwot Hot washers with recirculation systems Sink-float separation stage Post washer and recirculation system (2) Double-stage air separators Sesotec optical flake sorter (9) Filling stations Electrical control system Steel structures and piping More information is available on request.

Condition: used, Year of construction: 2013, Overview Complete filling line from the food sector made by the German manufacturer Breitner (2013). It was previously used for filling liquid cheese products and sealed with press on and screw closure. Further more spray pumps with rising pipes can be handled. Due to various additional features, such as a laminar flow system and special attention to hygienic design, a cleanroom classification is achieved. Machines: Pos. 1 Bottle unscrambler Breitner BFC 8002 (2013) Pos. 2 Filling machine Breitner MDL 2086 (2013) Pos. 3 Rotary capping machine Breitner SRT 5044 (2013) Conveyor systems: several conveyors included. All conveyors: Chain width: 82,5 mm Belt housing: stainless steel AISI 304 Belt guide: plastic c-profile, 2-fold and stainless steel rods Chain material: Delrin steel The unclosed bottles are protected of falling dirt by a roof made of plexiglas over the conveyor.  Bottle formats: Our service: send us your requirements and we will check the possibility of processing your bottle format. Cap formats: Screw caps, press-on caps, spray pumps with riser pipes   Our service: send us your requirements and we will check the possibility of processing your cap format. Capacity: Unscrambler: max. 6.000/h Filling machine: max. 5.000/h Rotary capping: max. 5.000/h The output depends on the container and cap geometries and the filling product.    1. Bottle Unscrambler BREITNER BFC 8002 Operation: continuous from supply bin Bin volume / drum Ø: 1.4 m³ / 1500 mm Working height: 900 mm, left → right Material / Housing: AISI 304 stainless steel + plexiglass Safety: door switches, overload protection Power / Air: 3 × 400 V, 4 kW / 400 Nl/min at 6 bar Container size: round Ø ≤100 mm × 250 mm, larger on request Feature: blow-cleaning station with ionized air and dust extraction 2. Filling Machine BREITNER MDL 2086 Filling: mass flow, 8 stations (expandable to 12) Filling range: 100 – 2000 ml/g, up to 5,000 bottles/h Working height / direction: 900 mm, left → right Product-contact parts: AISI 316, food-grade hoses, VITON seals Tank / Pressure: 100 L, 5 bar Power / Air: 3 × 400 V, 4 kW / 150 Nl/min at 6 bar Container size: H 50–350 mm, Ø/width 50–80 mm, various shapes CIP cleaning: 8 cleaning cups, automatic spray & drain, multi-step program Extras: laminar flow, remote maintenance, additional filling valves, swiveling tray, heating system 3. Rotary Capping Machine BREITNER SRT 5044 Operation: continuous rotary, 4 capping stations Output: up to 5,000 containers/h Container size: Ø ≤100 mm, H ≤300 mm Working height / direction: 900 mm, left → right Drive / Tools: servo motor, 0,3-3,5 Nm; BREITNER capping tools Power / Air: 3 × 400 V, 4 kW / 100 Nl/min at 6 bar Control: B&R controller, touchscreen, 200 format memories, password-protected Safety & inspection: door switches, overload, “No bottle – no closure,” optical cap check, reject system Extras: servo vertical movement, torque monitoring, fan-based cap feed, vibratory sorter VIB 8001, cap supply SFB 8001 Kwedpfx Adoxqzmwjwst

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, Optical Sorter Multiselector Concept Engineers Manufacturer: Concept Engineers b.v. Model/Type: Multiselector 0SS12142030 Serial Number: 99228 Year of Manufacture: 2009 Power Supply: 400 V, 14 A, 3 phases, 50 Hz Kwedpfxjw Tdwle Adwet Air Requirement: 6 bar Water Requirement: 1-3 bar Dimensions: 4200 × 2100 × 2600 mm Belt Width: 1250 mm Weight: 2500 kg Construction: stainless steel The Multiselector by Concept Engineers is an industrial sorting machine designed for precise selection and quality control of food products. The unit utilises advanced separation technologies, allowing accurate rejection of elements that do not meet quality standards. Its wide conveyor belt (1250 mm) ensures high throughput, while the robust stainless steel construction guarantees durability, easy cleaning, and compliance with the stringent hygiene requirements of the food industry.

Condition: refurbished (used), functionality: fully functional, Year of construction: 2014, operating hours: 23,000 h, controller model: Siemens Sinumerik 840D SL, laser type: fiber laser, laser power: 5,000 W, working length: 3,000 mm, working width: 1,500 mm, The machine was overhauled in 2025! TECHNICAL DETAILS Working area: 3,000 x 1,500 mm Laser type: Fiber laser Laser power: 5,000 W MACHINE DETAILS Control: Siemens Sinumerik 840D SL Year of last overhaul: 2025 Laser beam transmission: Fiber optic Machine chiller unit: Water-air Laser chiller unit: Air-water Operating hours: 23,000 h EQUIPMENT CE marking Nozzle changer Chiller unit Emergency stop switch Safety light barrier Dust extraction system Machine frame with integrated control cabinet Automatic longitudinal pallet changer Axis drive with linear motor technology and torque motor Integrated control cabinet lighting Central main switch Longitudinal chip conveyor Working area illumination Laser positioning diode Oil vaporization system PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Transport and positioning device Universal laser cutting head with adaptive lens system Single-head strategy Cutting head protective window Online monitoring of protective window ControlLine Automatic standstill Program-controlled cutting gas pressure regulation FastLine FlyLine AdjustLine Remote maintenance via internet Simple workshop programming Kedpox Tuk Dsfx Adwowt Copper processing package Brass processing package Micro welding Multiple sheet processing Condition Guide USB interface RJ-45 network card Central connection Segmented extraction unit Compact dust collector Machine cabin with safety windows Electrically opening roof Commissioning Network configuration via remote maintenance Solid-state laser TruDisk 5001 (5 kW) with fiber output DetectLine Machine layout right-hand side Interface for LiftMaster Compact

Year of construction: 2026, operating hours: 1 h, condition: new, functionality: fully functional, machine/vehicle number: Mzbp06, Equipment: CE marking, The fully automatic horizontal automatic cartoning machine is a high-tech product integrating optics, electronics, pneumatics, and mechanics. Kwedpfxoya Uq Ne Adwot It is suitable for the automatic cartoning of various products. Its workingprocess involves the conveying of items; automatic opening andconveying of cartons; automatic loading of materials into the cartons;and automatic gluing and tongue insertion, among other complex sealingprocesses. The machine's exterior is entirely constructed of high-qualitystainless steel and is innovatively designed in strict accordance with thepharmaceutical industry's "GMP" standards. The transmission system isdesigned with overload protection and an emergency stop device. Theoperating system uses a human-machine interface video screen to ensureoperator safety.

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold Kwsdpfowugczsx Adwjt 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Condition: good (used), Polar Mohr N78 Plus Paper Cutting Guillotine Machine after inspection, ready to work. Like new. Year of production 2014. Technical data: Cutting width 780mm Stack height 120mm 21.5″ LCD display 400V power supply Weight 1400kg Enlarged side tables. Kodpjx Ty H Rjfx Adwowt Chrome table surface Table backlight and optical cutting line Smoothly adjustable pressure force Additional covers for the rear table. Spare knife, sticks, tapping block, operating tools.

Condition: excellent (used), Levigaltecnica Mikro SR/RTC/1100 Wide Belt Sander Working width: 1100 mm Working height: 3-160 mm Number of sanding units: 2 Unit with rubber roller Combi unit with sanding pad Optical oscillation Kwsdpfxex Tqdte Adwet Electric height adjustment Abrasive belt dimensions: 2150×1170 mm Two feed speeds

Condition: excellent (used), For sale: metal lathe from the English manufacturer Harrison, model m300, as shown in the photos. The machine is in very good condition. It is equipped with a new 160 mm chuck from Fuerda. Sino brand optical scales have been installed. During test turning over 20 cm, a diameter variation of 0.04 mm was measured. Price is non-negotiable. Net price +23% VAT. Chuck: 160 mm Turning length: 600 mm Swing over cross slide: 220 mm Swing over bed: 320 mm Tailstock taper: MK3 Kodpfx Ajx Ur Amjdwewt Spindle bore: 38 mm

Condition: used, Year of construction: 2021, Machine Description for 2021 Model: Horizontal Machining Center NHX 5000 Kwedjxnkdmepfx Adwjt Manufacturer: DMG MORI Bielefeld Hilden GmbH Type / Model: NHX 5000, Fanuc 31iB with CELOS ERGOline Touch Year of Manufacture: 2021 Control System: FANUC 31iB with CELOS / 21.5" Multi-Touchscreen / MAPPS system Technical Data: • Working Area / Travels: - Travel X / Y / Z: 730 / 730 / 880 mm - Pallet size: 500 × 500 mm - Pallet quantity: 2 (with threaded holes) - Minimum B-axis indexing angle: 0.001° (DD direct drive) - Max. rotary table speed: 100 rpm - Pallet load: 500 kg - Hydraulic coupling with 2 hydraulic and 2 air circuits (max. 7 MPa) - Automatic indexing setup station • Performance / Spindle Speed / Drive Power: - Spindle: speedMASTER® motor spindle - Speed range: 35 – 20,000 rpm - Power: 37 / 26 / 18.5 kW (15% / 30 min / continuous duty) - Torque: 221 / 107 / 86.8 Nm - Tool taper: SK40 (7/24 taper, face contact) - Tool magazine capacity: 60 tools (ring-type, random selection) - Max. tool diameter: 70 mm (adjacent) / 170 mm (free) - Max. tool length: 550 mm - Max. tool weight: 12 kg - Chip conveyor: rear discharge with drum filter - Through-spindle coolant interface (8-step pressure control, up to 7 MPa) - Coolant / air switching via spindle - External coolant system: INTERLIT TMF300/600 compact filter unit (70 bar / 32 L/min) • Weight / Dimensions / Electrical Connection: - Machine weight: approx. 12,000 kg - Coolant tank capacity: 800 L - Transformer: 54 kVA - Power supply: 400 V, 50 Hz Equipment / Accessories: - Renishaw OMP60 spindle probe system (optical transmission) - Tool breakage detection system in the magazine - Hydraulic coupling on both pallets with integrated pressure regulation (7 MPa) - Automatic door for setup station - Rotating inspection window (air-driven) - Oil mist extraction system: LTA AC3002 (1,050 m³/h, dual electrostatic stages) - INTERLIT TMF300/600 high-pressure coolant filter system (70 bar, 32 L/min) - EtherNet/IP robot interface - IoTconnector, NETservice, Machine Data Connector (MDC), DMG MORI Messenger - CELOS with touchscreen and MAPPS functionality - Four-color signal light tower - Handheld control device (mobile handwheel) - Central coolant preparation for through-spindle supply - Drain circuit for auto-coupler (to prevent pressure drop) - 10 programmable external M-codes - 2 hydraulic clamping towers (each with 6 hydraulic 2-jaw chucks, GHHY-2B-200.00/K) - Voltage: 400 V, 50 Hz configuration - Air filter unit (T105A-1000MSP) This summary uses industry-standard terminology and structure suitable for platforms such as Machineseeker or TruckScout24.

Condition: used, Year of construction: 2023, tank capacity: 1,00,000 l, GENERAL Equipment: Venting/air release Design: Horizontal Year of manufacture: 2023 Notes: Manhole diameter approx. 600 mm; includes optical leak detector, tank fitting for heating oil, overfill prevention device, and ladder with working platform; External diameter: 2,900 mm Total length: 16,050 mm Heating/cooling: present Location: External storage Minden Technical documentation: Drawing, various documents Nameplate: Volume: 100,000 liters Kjdpfxsyckwqj Adwewt Product-contact material: Steel Condition: used Cylindrical length: 14,960 mm Last application: Heating oil TANK Support type: Saddles welded on HEATING/COOLING JACKET Internal temperature control: Immersion heater EQUIPMENT Manhole / dome: on the tank

Condition: good (used), For sale: professional Vision Engineering Lynx Compact X6 stereo microscope, manufactured in the UK. This is a modern eyepiece-free microscope, providing a spatial 3D image without the need to place eyes against eyepieces – offering exceptional comfort for quality control and precision assembly tasks. Technical specifications: • Manufacturer: Vision Engineering Ltd. (UK) • Model: Lynx Compact X6 • Magnification: 6× (Compact X6 objective) • Type: stereo, eyepiece-free Kwodpsxtfqxefx Adwet • Illumination: integrated LED in the base • Power supply: 230 V • Head with focus and height adjustment • Serial number: MFS 11572 • DGUV safety inspection – current safety test certification Condition: • Used item, optics are clean, mechanics fully operational. • Damaged upper cover of the plastic element (visible in photos) – does not affect operation or image quality. • Illumination is fully functional. • Device tested and ready for use. Applications: Laboratories, quality control, electronics, optics, and medical industries. Excellent for precision work, SMD soldering, PCB inspection, micromachining, and micromechanics.

Condition: ready for operation (used), Year of construction: 2002, operating hours: 8,000 h, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, controller manufacturer: fanuc, controller model: 16i MA, table width: 1,000 mm, table height: 500 mm, table load: 700 kg, rotational speed (max.): 20,000 rpm, overall weight: 9,300 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 8,000 h, spindle nose: HSK 63A, number of slots in tool magazine: 25, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, High-speed, high-precision vertical machining centre of Japanese manufacture. Furthermore, equipped with the following OPTIONS: MARPOSS wireless 3D workpiece measuring probe, swarf/chip conveyor, high-pressure coolant through the spindle, Kodpfexryb Njx Adwjwt extended coolant system: 12 nozzles, 100 l/min capacity, electrospindle: 20,000 rpm, 22 kW, HSK 63A taper, with dedicated chiller, tool magazine expanded to 25 positions, FANUC high-dynamic drives (Alpha 22 and Alpha 30), ballscrews cooled by a dedicated chiller, linear optical scales, tool setter (length and breakage detection), active tool load monitoring, ROTOCLEAR on the main door, FANUC SUPER GI option (Geometric Intelligent Control), FANUC RISC option (Reduced Instruction Set Computer), FANUC NURBS option (Non Uniform B-Spline), FANUC DATA SERVER option (160Mb), FANUC ETHERNET network port option, serial RS 232 output.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, punching force: 330 t, Machine for punching, embossing, waste removal, and blank separation - as is - System equipped with a high-performance sheet feeder designed for automatic NON-STOP operation ⦁ For fully automatic punching, creasing, and embossing with or without gripper edge ⦁ For removal of internal waste as well as lateral and rear sheet edges ⦁ For stack-like delivery of punched and waste-removed sheets with attached gripper edges or ⦁ For separation of gripper edges and subsequent stack-like delivery of the remaining sheets ⦁ With a patented gripper carriage registration system for highest registration accuracy ⦁ With a pile stacker machine enabling fully automatic interleaving sheet feed as well as NON-STOP stacking and does not require modification even for the smallest job sizes (exchange table with comb structure) ⦁ Interleaving sheet magazine with electronic level monitoring, refillable during production Kwsdpfsww E Nrox Adwet ⦁ With Centerline equipment ⦁ With automatic pallet change device at the delivery section Specification Maximum sheet size: 760 x 1060 mm Minimum sheet size: 350 x 400 mm Maximum punching force: 3.3 MN (330 t) Speed: 9,000 sheets/hour Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/m² Corrugated board up to 3 mm (max. sheet warp 4%) Equipment: Optical sheet register (Dyset) Automatic non-stop feeder Waste removal station Blank separation station Centerline Fully automatic pallet changing device at delivery Incl. platform Quick-lock frames at all tooling stations

Year of construction: 2011, operating hours: 18,595 h, condition: ready for operation (used), General Data Measurements width 4600 Measurements depth 9950 Measurements height 2400 Machine weight 12000 Control Unit Brand SIEMENS Model Sinumerik 840 D Main Drive Spindle speed range 300 Workpiece Workpiece X 3000 mm Workpiece Y 1500 mm Workpiece Z 115 mm Max Material Thickness Steel 20 mm Stainless steel 15 mm Aluminium 15 mm Additional Equipment Closed machine frame with an integrated laser unit Torque drive combined with direct linear drives Enclosed beam delivery via fiber optic cable Water-air chiller for machine cooling Integrated electrical cabinets with internal lighting Automatic pallet changer (lengthwise installation) Power supply through TruDisk integrated into the machine Kjdpex R E Nljfx Adwowt Working area lighting Wide longitudinal conveyor Positioning laser diode This TRUMPF Trulaser 5030 Fiber was manufactured in 2011. A robust fiber laser cutting machine, it features a 3000 Watt laser output and a working area of 3000 x 1500 x 115 mm. Capable of cutting up to 20 mm steel, 15 mm stainless steel, and 15 mm aluminum, it operates with a Siemens Sinumerik 840 D control system. If you are looking to get high-quality cutting capabilities consider the TRUMPF Trulaser 5030 Fiber machine we have for sale. Contact us for more information. Application Types Cutting

Condition: used, Spectro SPECTRO MAXx / LMM04 Description: For sale is an optical emission spectrometer SPECTRO MAXx for professional metal and alloy analysis. The device is suitable for rapid and precise determination of the chemical composition of metals such as steel, cast iron, as well as various non-ferrous alloys. It is a proven industrial instrument widely used in foundries, laboratories, and quality assurance departments. Technical Data: Device Information: Device type: Optical Emission Spectrometer (OES) Manufacturer: SPECTRO / AMETEK Model: SPECTRO MAXx Design: Benchtop device Electrical Specifications: Power supply: 115 / 230 V AC Frequency: 50 / 60 Hz Power consumption during measurement: approx. 400 VA Power consumption in standby: approx. 180 VA Fusing: 16 A (slow-blow) Gas Supply: Operating gas: Argon (Ar) Kodpfx Ajybcfksdwswt Argon purity: min. 4.8 (99.998%) Input pressure: approx. 7 bar Argon consumption: Stand-by: approx. 6 l/h Constant operation: approx. 23 l/h Analysis mode: approx. 200 l/h Ambient Conditions: Operating temperature: +10 °C to +30 °C Humidity: 20–80%, non-condensing Dimensions & Weight: Dimensions (W × D × H): approx. 600 × 740 × 460 mm Weight: approx. 60 kg Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see photos) - SPECTRO MAXx spectrometer - PC with monitor, keyboard, and mouse - Argon unit - Original manuals & software media (Errors and changes in the technical data, as well as prior sale, reserved!) If you have further questions, we are happy to answer them by phone.

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, operating hours: 8,650 h, control type: CNC control, laser hours: 8,650 h, laser power: 2,000 W, AMADA CNC Fiber Laser LCG-3015 AJ 2 kW Fiber Skid table Customs tariff no.: 84561000 / Japan / no preferential origin AMNC Multi Media controller 2000 Watt laser power AJ Fiber Laser Principle: flying optic 3 axes direct drive (X/Y/Z), oil shot function Including sensor cutting head Including lens quick change system Kodpfx Ajycf N Iodwjwt Including nozzle quick change system Including cutting lenses: 150, 190, 190 AX mm Including NC-gas control Including NC-focus control Including clean cut, high pressure cutting Including aluminum cut function Including air purge system Including CE-compliant safety features Including Software 5A-BLANKSOLPACK Including Shuttle Table PCLCG3015 Year of manufacture: 04/2014

Condition: new, Year of construction: 2026, functionality: fully functional, The Nanxing NCG3021L(LL) is a high-performance CNC nesting machining center engineered for automatic cutting, drilling, grooving, and part labeling, all within a fully integrated and automated workflow. This model incorporates automated loading, unloading, and labeling systems, delivering comprehensive automation, intelligent operation, and IT-driven production efficiency. Its open software interface enables seamless connectivity with furniture design suites and ERP platforms, ensuring fully optimized and data-driven panel processing. The professional FCC optimization software enhances cutting efficiency, minimizes material waste, and facilitates streamlined production management. This machine represents an ideal solution for advanced furniture manufacturing by reducing labor expenses while maintaining high standards of precision and productivity. Key Features - Automatic loading and unloading system equipped with a 3-ton lift table, pre-push device, and safety curtains for efficient material handling. - Rotary labeling system with integrated Honeywell printer, facilitating simultaneous labeling and machining operations. - Robust vacuum worktable (3100×2150 mm) segmented into 10 independently controlled zones, guaranteeing powerful and uniform vacuum suction. - Dual 7.5 kW oil-cooled vacuum pumps deliver maximum suction power at low noise levels. - High-rigidity gantry frame ensures enduring precision and operational stability at high processing speeds. - Italian-made 12 kW main spindle (HSK-63F, ATC, 24,000 rpm), featuring internal and external air blast for optimal dust extraction. - 12-position automatic tool changer (ATC) enables rapid tool changes, supporting a wide range of complex machining tasks. - 21-spindle drilling block designed for precise vertical and horizontal drilling operations. - Automated lubrication system minimizes maintenance needs and prolongs component life cycle. - Advanced dust extraction system with front and rear collection points maintains a clean working environment. - Comprehensive safety design includes a protective fencing system and optional optical barrier for maximum operator security. - User-friendly SYNTEC CNC control system compatible with MPR, DXF, TCN, and standard NC file formats. Technical Specifications - Working area: X: 3100 mm / Y: 2150 mm / Z: 50 mm - Worktable height: 1010 mm - Maximum traverse speed: X/Y axes 70 m/min, Z axis 20 m/min - Main spindle: 12 kW, HSK-63F, 24,000 rpm Kwodpfx Ajxcwnbsdwjt - Tool changer: 12-position servo-driven ATC - Drilling block: 21 vertical spindles, 2.5 kW, 4000 rpm, max drilling diameter 35 mm - Vacuum pump capacity: 2 × 7.5 kW, 250 m³/h - Total installed power: 47 kW - Machine dimensions: 13,800 × 3,950 × 2,600 mm - Weight: 6,000 kg - Power supply: 380V / 50Hz / 3-phase Applications - Panel furniture manufacturing (kitchen cabinets, wardrobes, office furniture) - Nesting-based cutting and drilling of MDF, particleboard, and plywood - Automated production lines with integrated labeling for Industry 4.0 smart factories Advantages - Complete solution: automated loading, nesting, drilling, grooving, labeling, and unloading in a single workflow. - Outstanding efficiency: optimized software paired with dual synchronized gantries doubles processing throughput. - Labor saving: minimal operator involvement required. - Ideal for large-scale production: stable operation, precise machining, and consistently superior product quality.

Condition: good (used), mileage: 3,43,717 km, power: 162 kW (220.26 HP), first registration: 11/2019, fuel type: diesel, tire size: 225/75R17,5, axle configuration: 4x2, wheelbase: 3,900 mm, fuel: diesel, color: red, driver cabin: day cab, gearing type: automatic, number of gears: 6, emission class: euro6, suspension: steel-air, total length: 6,640 mm, total width: 2,550 mm, total height: 2,710 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, traction control, = Additional Options and Equipment = - Digital tachograph - Tachograph (control device) - Fixed fifth wheel - Hydraulic system - Short cab - Power take-off (PTO) - Pump = Notes = Number of axles: 2, Configuration: 4x2, Unladen weight: 6,425 kg, Gross weight: 8,800 kg, Total fuel tank capacity: 150 liters, Fifth wheel: Fixed, Number of differential locks: 1, Suspension type: Air suspension, Cab type: Short cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Radio/cassette, GPS navigation, Color: Red, Heated mirrors, Reverse camera, Lighting type: Halogen lamp, Lane keeping assistant, Air conditioning, Heated seats, Bluetooth, Flashing lights, Engine power: 162 kW (217 hp), Fuel: Diesel, Euro: 6, Transmission type: AS-Tronic, Gearbox make: ZF, Gears: 6, Power steering, ABS, ASR, Hydraulic system, Power take-off (PTO), PTO type: 1, Starter battery, Pump, Central locking, Seating configuration: 1+2, Seat upholstery: Fabric, Seat adjustment: Manual, BOTTIE CAR TOWING LIFT 8 TONS = Further Information = Gearbox Transmission: ZF, 6-speed, automatic Axle configuration Brakes: Disc brakes Axle 1: Tire size: 225/75R17.5; Steer axle; Tire tread left: 10 mm; Tire tread right: 11 mm; Suspension: leaf springs Axle 2: Tire size: 245/70R17.5; Twin-mounted; Inner left tire tread: 6 mm; Outer left tire tread: 6 mm; Inner right tire tread: 5 mm; Outer right tire tread: 6 mm; Suspension: air suspension Weights Curb weight: 6,425 kg Payload: 2,375 kg gross vehicle weight (GVW): 8,800 kg Functional Pump: Yes Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing rate: €623 per month (default, 60 months); Please inquire for further information and terms Identification Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European makes, model years, and price ranges. Why buy from Kleyn Trucks? It’s simple! • Large, rapidly changing inventory • Recognizable quality • Good pricing • Reliable business practices • We speak many languages • We understand our customers • Support with import and transport Ksdpfx Adjycci Ejwowt • (Export) license plates arranged quickly • Professional technical services • The security of "recognizable quality" • And much more … Please visit our website for special offers and our full stock list. Leasing through Kleyn Trucks is possible in most European countries! Calculate your leasing rate quickly and send a request via our website. Ask directly about our European warranty package.

Condition: good (used), mileage: 2,94,785 km, power: 154 kW (209.38 HP), first registration: 03/2022, fuel type: diesel, tire size: 285/70R19,5, axle configuration: 4x2, wheelbase: 5,320 mm, fuel: diesel, color: black, driver cabin: day cab, gearing type: mechanical, number of gears: 8, emission class: euro6, suspension: steel-air, total length: 9,400 mm, total width: 2,550 mm, total height: 3,700 mm, loading space length: 7,270 mm, loading space width: 2,480 mm, loading space height: 2,440 mm, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, tail-lift, traction control, trailer coupling, = Additional Options and Equipment = - Digital tachograph - Journey recorder (control device) - Fixed - Short cab - Tail lift = Remarks = Number of axles: 2, Configuration: 4x2, Total tank capacity: 200 litres, Trailer coupling, Kingpin diameter: 40 DIN, Fifth wheel: fixed, Number of locks: 1, Suspension type: air suspension, Cab type: short cab, Cruise control, Journey recorder (control device), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Radio/cassette, GPS navigation, Colour: black, Heated mirrors, Lighting type: halogen lamp, Lane-keeping assist, Seat heating, Bluetooth, Engine power: 154 kW (207 Hp), Fuel: diesel, Euro: 6, Transmission type: manual, Gearbox type: Volvo, Gears: 8, Clutch pedal, Power steering, ABS, ASR, Starter battery, Central locking, Seating arrangement: 1+1, Seat upholstery: fabric, Seat adjustment: manual, Tail lift, Tail lift type: tailgate, Tail lift capacity: 1500 kg, Tail lift manufacturer: Palfinger, Tail lift material: aluminium, Tail lift dimensions: 180 x 252 = Further information = Transmission Transmission: VOL, 8 gears, manual Axle configuration Tyre size: 285/70R19.5 Brakes: disc brakes Axle 1: steered; left tyre tread: 12 mm; right tyre tread: 12 mm; suspension: leaf suspension Axle 2: twin tyres; inner left tyre tread: 10 mm; outer left tyre tread: 10 mm; inner right tyre tread: 11 mm; outer right tyre tread: 11 mm; suspension: air suspension Functional Tail lift: Palfinger, tailgate, 1500 kg Loading platform height: 108 cm Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing rate: €918 per month (default, 60 months); please ask for more information and terms Identification Registration: KLEYN1 = Company Information = Kleyn Trucks is one of the world’s largest independent traders of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our offer includes all European brands, model years and price categories. Why buy from Kleyn Trucks? Simple! • Large, fast-changing stock • Recognisable quality • Competitive pricing • Correct business dealings • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates quickly arranged • Expert technical services • The assurance of 'recognisable quality' • And more… Please visit our website for special offers and a complete stocklist: Leasing through Kleyn Trucks is possible in most European countries! Easily calculate your leasing rate and submit your inquiry via our website. Ksdpfxoycch Io Adwjwt Ask directly about our European warranty package.

Condition: good (used), mileage: 8,38,478 km, power: 340 kW (462.27 HP), first registration: 04/2016, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,200 mm, total width: 2,550 mm, total height: 3,920 mm, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, parking heater, power mirror, retarder, traction control, = Additional options and equipment = - Digital tachograph - Tachograph (control unit) - Fixed - Hydraulic system - PTO (power take-off) - Pump - Super Space Cab - Additional braking system = Notes = Number of axles: 2, Configuration: 4x2, Unladen weight: 8,527 kg, Gross weight: 20,500 kg, Total tank capacity: 845 liters, Fifth wheel height: 125 cm, Fifth wheel: Fixed, Number of locking differentials: 1, Suspension type: Air suspension, Cab type: Super Space Cab, Cruise control, Tachograph (control unit), Digital tachograph, Air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Color: White, Heated mirrors, Lighting type: Halogen lamp, Lane departure warning system, Heated seats, Engine output: 340 kW (456 Hp), Fuel: Diesel, Euro: 6, Transmission type: AS-Tronic, Gearbox brand: ZF, Gears: 12, Additional braking system, Retarder brand: Intarder, Power steering, ABS, ASR, Hydraulic system, PTO, PTO type: 1, Starter battery, Pump, Central locking, Seat configuration: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual = Further information = Transmission Gearbox: ZF, 12 gears, automatic Axle configuration Brakes: Disc brakes Axle 1: Tire size: 385/65R22.5; Steered; Tread depth left: 6 mm; Tread depth right: 6 mm; Suspension: Leaf spring Axle 2: Tire size: 315/80R22.5; Twin tires; Tread depth left inside: 7 mm; Tread depth left outside: 6 mm; Tread depth right inside: 8 mm; Tread depth right outside: 13 mm; Suspension: Air suspension Weights Curb weight: 8,527 kg Payload: 11,973 kg Gross vehicle weight: 20,500 kg Functional Pump: Yes Maintenance APK (technical main inspection): Valid until 04/2026 Condition Technical condition: Good Optical condition: Good Damages: None Number of keys: 1 Identification Registration number: KLEYN1 = Company information = Kleyn Trucks is one of the world’s largest independent used vehicle dealers. Here, you can select from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our inventory includes all European brands, production years, and price ranges. Why buy from Kleyn Trucks? It’s simple! • Large, fast-changing stock • Recognizable quality Kwodpfxeycchbo Adwet • Competitive prices • Fair business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration plates are quickly arranged • Professional technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and the full stock list: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask us directly about our European warranty packages.

Condition: good (used), mileage: 14,89,593 km, power: 302 kW (410.61 HP), first registration: 01/2017, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 3,700 mm, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,000 mm, total width: 2,550 mm, total height: 4,020 mm, Year of construction: 2017, Equipment: ABS, air conditioning, cruise control, traction control, = Additional Options and Accessories = - Digital tachograph - Tachograph (control device) - Fixed - Sleeper cab - Central lubrication system = Remarks = Number of axles: 2, Configuration: 4x2, Payload: 11,509 kg, Unladen weight: 7,491 kg, Gross weight: 19,000 kg, Total tank capacity: 700 liters, Trailer load, unbraked: 750 kg, Fifth wheel height: 116 cm, Fifth wheel: Fixed, Central lubrication system, Cab type: Sleeper cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Color: Multicolored, Lighting type: Halogen lamp, Engine power: 302 kW (405 hp), Fuel: Diesel, Euro: 6, Transmission type: Opti-cruise, Gearbox make: Scania, Gears: 12, Power steering, ABS, ASR, Starter battery, Seats: 2, Seat configuration: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual = Further Information = Transmission Gearbox: SCA, 12 speeds, Automatic Axle configuration Tyre size: 315/70R22.5 Brakes: Disc brakes Axle 1: Steered; Tire tread left: 9 mm; Tire tread right: 9 mm; Suspension: leaf suspension Axle 2: Twin tires; Tire tread left inside: 17 mm; Tire tread left outside: 16 mm; Tire tread right inside: 16 mm; Tire tread right outside: 17 mm; Suspension: air suspension Weights Curb weight: 7,491 kg Payload: 11,509 kg Gross Vehicle Weight (GVW): 19,000 kg Interior Number of seats: 2 Maintenance APK (periodic technical inspection): valid until 07.2026 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Identification License plate: 60-BHT-8 = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands from various model years and price categories. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing inventory • Recognizable quality • Competitive pricing • Reliable business practices Kodpfx Ajxwkb Rodwjwt • Multilingual staff • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Professional technical services • The security of 'recognizable quality' • And more... Please visit our website for special offers and our complete inventory. Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send an inquiry via our website. Ask directly about our European warranty package.

Condition: excellent (used), mileage: 10 km, power: 150 kW (203.94 HP), first registration: 01/2026, fuel type: electric, tire size: 225/75R16, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: electricity, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 3, total length: 7,150 mm, total width: 2,050 mm, total height: 2,650 mm, loading space length: 4,300 mm, loading space width: 1,760 mm, loading space height: 1,910 mm, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking heater, power mirror, traction control, = Additional options and accessories = - None - Partition wall = Notes = Configuration: 4x2, Cab type: single cab, Cruise control, Air conditioning, Number of airbags: 2, Parking heater, Parking assistance: none, Electric windows, Electric mirrors, Partition wall, Radio/cassette, GPS navigation, Color: white, Reversing camera, Lighting: LED lamps, Lane keeping assist, Climate control, Heated seats, Bluetooth, Blind spot sensor, Engine power: 150 kW (201 hp), Fuel: electric, Euro: 6, Transmission type: automatic, Power steering, ABS, ASR, Starter battery, Body type: extended and raised, Side wall paneling, Rear step, Roof rack: none, Side doors: 1, Rear closure: double doors, Central locking, Seats: 3, Seat arrangement: 1+2, Upholstery: fabric, Seat adjustment: manual, 204 hp fast charging LED MBUX10 ac automatic towing capacity 2000 kg, Spare wheel, Tire type: summer tires = Further information = General information Number of doors: 1 Registration number: KLEYN1 Kedpfx Adjycb N Rswswt Axle configuration Tire size: 225/75R16 Brakes: disc brakes Suspension: leaf spring suspension Axle 1: Tire tread left: 8 mm; Tire tread right: 8 mm Axle 2: Tire tread left: 8 mm; Tire tread right: 8 mm Functional Loading height: 68 cm Condition Technical condition: very good Optical condition: very good Damage: none Number of keys: 2

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 850 mm, spindle speed (max.): 22,000 rpm, number of axes: 5, This 5-axis OMV Active Five 3000 was manufactured in 2008. It features a fixed table with a tilting head, Heidenhain TNC-530 control, and a travel range of 3000 x 1800 x 850 mm. The spindle operates at 22,000 rpm with a HSK63A taper and a 30-position tool changer. If you are looking to get high-quality milling capabilities, consider the OMV Active Five 3000 machine we have for sale. Contact us for more information. • Head rotation: B 360° / A ±105° Kwodpjx D H Duofx Adwst • Tool changer: 30 positions • Table size: 3100 x 1100 mm • Optical scales: Yes • Options/Features: • Torque motor head • Laser tool presetting • Laser measuring system