Used Optical Sorter for sale (2,692)

Condition: ready for operation (used), An optical image measuring system Keyence is available. Measuring dimensions X/Y: 100mm/200mm, measuring accuracy at L/100: +/-2µm, camera: CMOS. Includes measuring stage/support table, calibration template, computer and accessories. Documentation available. An on-site inspection is possible. Gedpjxu I A Hjfx Albjiu

Condition: ready for operation (used), Two Keyence optical LED light-band micrometers are available. Repeatability: +/-0.03µm, sampling rate: 16000 measurements/s, light source: green InGaN LED. Documentation available. On-site inspection is possible. Gsdpjv R Exuefx Albeiu

Year of construction: 2018, condition: ready for operation (used), An optical inspection machine Bizerba for label and seal inspection in packaging lines is available. Camera technology: dual-camera configuration, camera placement: top and bottom, conveyor belt speed: 90m/min, machine dimensions X/Y/Z: approx. 2100mm/900mm/1600mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible. Gsdsw Duvzjpfx Albeiu

Year of construction: 2009, condition: ready for operation (used), Resolution X/Y (3D and 2D): 21μm/10.5μm, illumination: multispectral, multidirectional, component clearance above/below PCB: 40mm/100mm, max. inspection speed: 50cm²/s, inspection range X/Y: 450mm/350mm. Dimensions X/Y/Z: approx. 1150mm/1150mm/1450mm, weight: approx. 500kg, software: OptiCon Pilot 5.3. Including calibration tool, instructions, camera, lighting and repair software for error visualization. Computer was replaced in 2012. Documentation available. Giodpstz Dkyjfx Albeu

Condition: ready for operation (used), Components per hour: 480,000, field of view (FOV) dimensions: 61.1x44.9mm², PCB dimensions: 50-533x50-609mm, PCB thickness: 0.5-4mm, max. PCB weight: 3kg, clamping clearance for PCB clamping: 3mm, component clearance under the camera: 34mm, component clearance under the PCB: 60mm. Length: 1110mm, width: 1351mm, height: 1892mm, weight: 900kg. Without loader and unloader. On-site inspection is possible. Gsdpswb E Sbofx Albsiu

Year of construction: 2018, condition: new, Interroll horizontal sorter, 158m length incl. 2x180° curves, width 6m, Giedjpdn Abspfx Albsu suitable for general cargo and trough transport, 3x drive motors 400V, sorterinfeed 2x, 12x spiral chute Fa. Krampe incl. 20 sorting tables after chute and roller conveyor. Throughput 2x 2.500 transport units/hour ( =33.500 packages/day ) 1080 tubs for transport. System was only in test operation. Only the hardware is sold.

Condition: new, Year of construction: 2025, Checkweigher to check if product meets target weight. 6 sorting stations with 2 way reject device, each. - Specifications: belt width: 220mm; weight range: 5-1000g; accuracy: +/- 0.3-3g; max. speed of the machine in neutral: 60 cycles/minute; power: 220V, 1-phase; machine dimensions (mm) approx.: L2459xW684xH780(weighing belt). Godpfx Aev Nm Rpjlboiu Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: not inspected (used), ISS 100 with vibrating chute and control cabinet more photos to follow the sorting machine will be handed over in working order sorting tests in manual feeding method can be carried out Gedpfxjv Duv Nj Alboiu

Condition: used, Good day, Gedpfx Aloww Ewvsbsiu I am selling a used ASYS MPS 100. The unit is fully functional and was used in an SMT production line for both SMD and THT assemblies. If you are interested or have any questions, feel free to contact me.

Condition: new, Year of construction: 2024, functionality: fully functional, Baty Venture FV - Flexible and precise vision measurement system in three variants The Baty Venture FV is a state-of-the-art vision measuring system developed for the fast and precise inspection of complex workpieces. It provides optical measurements that enable comprehensive detection of the workpiece geometry. This system is particularly suitable for the manufacturing industry, which demands both speed and precision in quality control. The Venture FV is available in three different versions to cover different measurement requirements: Available models: Baty Venture FV1080 With a measuring range of 100 mm x 80 mm, this compact version is ideal for smaller workpieces. It offers fast and precise inspection and is perfect for applications where both optical and tactile measurements are required. Baty Venture FV2020 This variant has a measuring range of 200 mm x 200 mm and is suitable for medium-sized workpieces. The CNC control in combination with the Fusion 3D software enables fully automatic measurements, which increases efficiency and precision during inspection. Baty Venture FV3020 With a larger measuring range of 300 mm x 200 mm, the FV3020 is the largest variant available. It is particularly suitable for the inspection of complex workpieces where high precision and detailed measurements are required. Common functions: CNC control: all models are CNC controlled, enabling fully automated, repeatable measurement processes that increase throughput on the shop floor. Software: This powerful software supports CAD import/export, DXF overlays and reports that include statistical process control (SPC). Programmable LED lighting: LED lighting provides optimal illumination of the workpiece to enable accurate edge detection and measurement. Advantages: Versatility: with three different variants, the Baty Venture FV offers the perfect solution for workpieces of different sizes and complexity. High measuring speed: Thanks to the CNC control and user-friendly software, measuring times are reduced and efficiency is increased. Gsdpfx Alsuyig Seboiu Precision: The measuring device ensures that both simple and complex workpieces are measured with maximum accuracy. The Baty Venture FV offers the ideal combination of speed, precision and flexibility for companies that need a reliable inspection solution in their production

Year of construction: 2010, condition: used, Newtec CELOX optical sorting line Machine has been upgraded to the newer type CELOX in 2016 The order is based on the following specifications Ambient temperature ± 5 – 25 ºC. Product Clean, washed carrots Capacity: 8 to 10 tons per hour, depending on the batch (quality and sorting) Product foreign materials The Celox cannot detect foreign materials such as glass, wood, stones etc. Functionality: Length: +/- 3mm (less than 1% errors) Diameter: +/- 1mm (less than 1% errors) broken: 60-65% is removed (on "normal" broken carrots) there will be 5-6% good carrots among the errors C/S shape: 85-90% is removed. There will be 3-4% good carrots among the errors Volume: +/- 5% -Incl. conversion of complete camera unit to new version -9 Cameras with 8 megapixel resolution (current 2 magapixel) Cameras look at the carrots from above and below at an angle Gjdpourhx Nefx Alboiu -Better detection of root rot -Better software for deformed products -Better software for quality and dimensions -Incl. set of vibrating channels for the new belts

Condition: used, functionality: unexamined, machine/vehicle number: 843-R, Used Newport 843-R Optical Laser Power Meter Set. Manufacturer: Newport Model: 843-R Giodpfx Aoxnbcgslbsu Set of device and power supply.

Condition: like new (used), functionality: fully functional, This series of machines selects products using a high-precision electronic system that sorts tomatoes according to the desired color shade and, depending on application, allows the rejection of products of undesired color or possible foreign bodies from the product flow. Sorting characteristics: Sorting efficiency: 96% Vision system: Optical sensors Optical resolution: 25 mm Illumination: LED visible/infrared Degree of protection: IP65 Ejection system: Mechanical / pneumatic with lubricated air Working pressure: 5 ÷ 6 bar Conveyor system: Belt conveyor Cleaning system: Water with automatic pneumatic movement of the brush (timed operation). Electromechanical characteristics: Operating voltage: 400 - 480 V (3-phase + neutral), 50 - 60 Hz Power consumption: 1 kW Gsdpoynkdnefx Alboiu Control voltage: 24 V DC Pneumatic connection: 7+8 bar, Consumption: 10 l/min, Temperature: 50ºC Hydraulic connection: 2+3 bar, Consumption: 0.3 l/min, Temperature: 25ºC.

Condition: used, This listing is for a Prior Scientific CL150 Fiber Optic Cold Light Illuminator Gsdpfxoxzg U Is Alboiu

Condition: used, Year of construction: 2007, Cutting height 175 mm cutting width 750 mm Motor output 5,5 kW saw-blade dia. 550 mm Weinig OptiCut C700 under-table cross-cut saw for safe and precise cross-cutting of solid wood, especially hard and heavy timber with large cross-sections. The machine works with a pneumatically guided saw unit, two-hand control and hold-down device and is ideal for sawmills, timber construction and industrial solid wood processing. Godpsy Tpqfofx Albeiu

Condition: used, Year of construction: 2004, cutting width max. 700 mm Cutting height max. 120 mm Giodpfx Ajx Eblvslbeu saw-blade dia. max. 700 mm

Condition: used, Year of construction: 2022, Cutting height 260 mm sawing motor 7,5 kW Gisdpfx Alox Ditfobsu saw-blade dia. 500 mm feed max. 250 m/min

Condition: used, Year of construction: 2012, operating hours: 926 h, total height: 1,800 mm, total length: 11,250 mm, total width: 900 mm, Colour: Grey Weight: 1.500 kg Price: On request - Year: 2012 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 546324 - Operating hours: 926 - Main motor power [kW]: 7.5 - Max. saw length [mm]: 7209 - Max. saw width [mm]: 300 - Max. saw blade diameter [mm]: 500 - Arbor saw blade diameter [mm]: 85 - Input table length [mm]: 7850 - Output table length [mm]: 2400 - Options: Automatic pusher system - Voltage [V]: 400 - Current consumption [A]: 22 - Fuse [A]: 25 - Power [kW]: 11.0 - Transport dimensions: 11250mm x 900mm x 1800mm (l x w x h) - Transport weight [kg]: 1500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels Giodpsyna Ezsfx Albou

Condition: used, Year of construction: 2002, total height: 1,600 mm, total length: 9,000 mm, total width: 2,400 mm, Colour: Grey Weight: 2.500 kg - Year: 2002 - Documentation available: No - CE certificate present: No - Serial number: 1073.14 - Input table length [mm]: 8360 - Output table length [mm]: 2750 - Options: Automatic pusher system - Voltage [V]: 400 - Fuse [A]: 25 - Power [kW]: 11.0 - Transport dimensions: 9000mm x 2400mm x 1600mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Gedoyddkajpfx Albeiu Yorick Diebels

Condition: used, Year of construction: 1996, Colour: Grey Weight: 3.500 kg - Year: 1996 - Documentation available: No - CE certificate present: No - Serial number: 10.6654 - Input table length [mm]: 8800 Godpfx Aloy Il Uceboiu - Output table length [mm]: 6650 - Voltage [V]: 400 - Fuse [A]: 25 - Power [kW]: 8.0 - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 6 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2001, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defecting mode. This machine is ideal for precise solid wood cutting, featuring automated detection and elimination of material defects. Gedpfjwtgcxjx Albjiu Technical specifications: Model: OptiCut S75-4 Manufacturer: GreCon Dimter Year of construction: 2001 Commission no.: 0682-10 Rotary current: 400 V / 50 Hz Control voltage: 230 VAC / 24 VDC Nominal output: 11 kW Fuse protection: 25 A Condition: used

Condition: ready for operation (used), Year of construction: 2018, Optimizing Cross-Cut Saw manufactured in 2018. This WEINIG DIMTER Opticut S90 features a saw blade diameter of 500 mm and a maximum cutting height of 120 mm. It accommodates input lengths from 400 to 6,300 mm and widths from 20 to 300 mm. If you are looking to get high-quality cutting capabilities, consider the WEINIG DIMTER Opticut S90 machine we have for sale. Contact us for further details. • Saw blade • Diameter: 500 mm • Bore: 30 mm • Adjustable saw blade speed: 40–100% via frequency converter • Workpiece capacity • Input length (min/max): 400–6,300 mm • Width (min/max): 20–300 mm • Thickness (min/max): 10–120 mm • Maximum cutting height: 120 mm • Minimum cross-section: 20 x 10 mm • Maximum cross-section 1: 215 x 120 mm • Maximum cross-section 2: 300 x 40 mm • Permissible timber curvature: max 2 mm/m or 8 mm over entire length Gijdpfx Aleylmmmebou • Table inclination: 10° • Motion and accuracy • Positioning speed (reverse stroke): max approx. 180 m/min • Positioning speed (forward stroke): max approx. 60 m/min • Positioning accuracy: +/- 0.1 mm • Motors and power • Pusher motor power: 5.1 kW • Saw motor power: 7.5 kW • Total electrical load: approx. 15 kW • Control and interface • Control unit: OptiCom Pro with 18.5" touch screen • Screen resolution: 1366 x 768 pixels • Protection class (front): IP65 • Interface: USB port and Ethernet network connection • Data format: CSV (ASCII) for import/export • Utilities and environment • Voltage: 400 V / 50 Hz • Operating pressure: 6–8 bar (min.) • Air consumption: approx. 250 NL/min • Extraction connection: diameter 125 mm • Required extraction performance: speed approx. 30 m/s; volume approx. 1,300 m³/h • Noise level (idling): ≤ 85 dBA

Condition: excellent (used), Year of construction: 2005, Weinig Dimter OptiCut S 90 optimizer with 2 ejectors – after technical review – German production – year of manufacture 2005 TECHNICAL PARAMETERS: Gisdpfxsi Apgmj Albeu max. length of cut material 4500 mm max. width 360mm max. height 160mm automatic length measurement optimization in 4 quality classes total power 13 kW blade motor power 7. 5 kW pneumatic side and top pressure disc diameter max. 500mm OptiCom Assist control receiving conveyor 5600 mm two ejectors total length 13 m component marking printer cutting accuracy +/- 0.5 mm transport dimensions (length / width / height) 600 / 240 / 190 cm weight ~ 1800 kg

Condition: excellent (used), Year of construction: 2004, Weinig Dimter Opticut 200 Classic optimizer - after the technical review - year of production 2004 - declaration of conformity, DTR - German production TECHNICAL PARAMETERS: min./max. entry length of the element 800/3500 mm min./max. entry width of the element 80/200 mm min./max. element input thickness 12/80 mm type of wood hard / soft dash cutting wood classification max. feed speed 120 m / min acceleration 5 m / s saw blade diameter fi 500 mm saw hole diameter 30 mm saw spindle speed 4600 U / min duration of 1 cycle 0.7 - 1.2 sec a powered conveyor at the entrance and a marking station with side tables for two markers conveyor belt total power 15 kW length measurement - fluorescence camera for 3 qualities receiving station - conveyor belt full optimization Gjdpfx Alogz Tbdebsiu total length 8300 mm stub diameter 80 and 120 mm OptiCom Direct control power supply 400 V / 50 Hz

Condition: good (used), Year of construction: 1998, Optimizer GreCon Dimter OPTICUT 204 R - year of production 1998 - full optimization - cutting to a dash - width measurement - possibility of cutting aluminum TECHNICAL PARAMETERS: - max. cutting length 4,000 mm - min. element 200 mm - max. cutting height 100 mm - max. cutting width 260 mm - disc diameter 500 mm - engine power 9 kW - feed speed max. 160 m / min Giedeh Hfknopfx Albsu - acceleration 2 m / s2 - optimization in terms of length and value - pneumatic pressure of the material - three ejectors - dump tables - Rotary table - total length of 2000 cm Transport dimensions: - length 1300 cm - width 245 cm - height 220 cm - weight 3500 kg