Used Optimization for sale (3,448)

Condition: used, Year of construction: 2001, Continuous press Manufacturer: Ligmatech Type: Optimat MDE 10 Year of manufacture: 2001 Technical data Body dimensions - Length: 300 - 2500 mm - Height: 300 - 1300 mm - Depth: 120 - 600/800 mm - Pressing forces are generated electrically, both horizontally and vertically, and can be varied independently - Pressing forces are applied vertically via a pressure plate and horizontally via 3 pressure jaws each - Pressing takes place centered and on a zero line on the operator side Positioning of the pressure jaws: - Top pressure jaw with forced guidance on the top press, optionally lowerable via cylinder - Middle pressure jaw freely programmable and motor-driven Pedpszuzxbjfx Abpsra - Bottom pressure jaw freely programmable and movable via a common drive with the middle pressure jaw Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2010, Edge banding machine Prsdpozuzlbofx Abpea Manufacturer: Brandt Type: Optimat KTD 720 Year of manufacture: 2010 Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2019, - 6 working spindles - max. working width 250 mm - feed rate 6 - 24 m/min used planing and profiling machine Manufacturer: HOMAG Type: Optimat LPP306 Year of construction: 2019 OPTIMAT LPP306 Planing and profiling machine with 6 working spindles. Workpiece width after processing: - min. 10 mm - max. 250 mm Workpiece height after processing: - min. 10 mm - max. 160 mm Control system: - PowerControl with powerTouch LPP300 Infeed table 2,500 mm Feed rate min. 6 m/min max. 24 m/min FIRST LOWER SPINDLE: - Spindle motor power 7.5 kW - Siemens IE3 energy-saving motor Power speed range: - 7.5 kW - 6,000 rpm Spindle diameter 40 mm Spindle length 281 mm FIRST RIGHT SPINDLE: Spindle motor power 7.5 kW, adjustable - Siemens IE3 energy-saving motor - Spindle speed continuously adjustable Power speed range: - 7.5 kW - 4,000 rpm - up to 8,000 rpm Spindle diameter 40 mm Spindle length 176 mm FIRST LEFT SPINDLE: Spindle motor power 7.5 kW, adjustable - Siemens IE3 energy-saving motor - Spindle speed continuously adjustable Power speed range: - 7.5 kW - 4,000 rpm - up to 8,000 rpm Spindle diameter 40 mm Spindle length: 176 mm Total length: 176 mm FIRST UPPER SPINDLE: - Spindle motor power 7.5 kW, adjustable - Siemens IE3 energy-saving motor Prjdezuzf Uspfx Abpja - Spindle speed continuously adjustable Power speed range: - 7.5 kW - 4,000 rpm - up to 8,000 rpm Spindle diameter 40 mm Spindle length 266 mm SECOND UPPER SPINDLE: Spindle motor power 7.5 kW, adjustable - Siemens IE3 energy-saving motor - Spindle speed continuously adjustable Power speed range: - 7.5 kW - 4,000 rpm - up to 8,000 rpm SECOND LOWER SPINDLE: Spindle motor power 7.5 kW, adjustable - Siemens IE3 energy-saving motor - Spindle speed continuously adjustable Power speed range: - 7.5 kW - 4,000 rpm - up to 8,000 rpm Spindle diameter 40 mm Spindle length 266 mm Note: The technical data and descriptions are a transcript of the original order confirmation. Data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2014, Drilling and dowel insertion machine Manufacturer: Weeke Type: OPTIMAT ABD150 Prjdpfxozuyn Is Abpja Year of manufacture: 2014 Technical data Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2017, Edge banding machine Manufacturer: Homag Type: Optimat KDF 440 C Year of manufacture: 2017 Technical data Workpiece thickness: 8 - 60 mm Edge material: 0.4 - 8 mm (depending on the equipment) Feed rate: 8 - 18 m/min (stepless) Workpiece length min. approx. 120 mm Workpiece width min. approx. 60 mm Glue application EVA hot melt adhesive, optionally PUR-compatible Glue reservoir Teflon-coated, quick-change system possible Total connected load approx. 15 - 20 kW (depending on the equipment) Compressed air requirement: 6 - 7 bar Machine weight: approx. 3,000 - 3,800 kg Control system: powerControl / powerTouch CE marking Pjdpfx Ajzuykcobpsra Equipment: Joint milling Glue application Pressure zone Cut-off saw unit Milling unit top/bottom Corner rounding unit Scraping blade unit Edge finishing unit Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2008, Single-sided edge banding machine Manufacturer: HOMAG Type: Optimat KAL210/6/A20/S2 Year of manufacture: 2008 Single-sided machine for joint milling of straight workpiece edges, edge banding and finishing of various edge materials from rolls or as strips, up to 20 mm edge thickness, in longitudinal and transverse operation. power control PC22 Modern control system based on Windows PC Technical data - Feed rate 18 - 25 m/min. - Feed rate with profile milling cutters FK11 max. 20 m/min. Psdpfjzux R Isx Abpjra - Workpiece thickness 8 - 60 mm - Edge material strips max. 0.4 - 20 mm - Edge material rolls 0.3 - 3 mm Joint milling unit - 2 motors, each 3 kW, 150 Hz, 9,000 rpm. for joint milling of the workpiece edge before edge banding - electropneumatic control of both motors Gluing unit A20 - 2 rollers Quickmelt hot melt adhesive unit - Temperature control electronically with LED display Magazine for 1 roll, manual - for solid edges, strips and rolls - 1 edge feed - 1 roll holder Pressure zone C - 1 driven pre-pressing roller, diameter 150 mm - 6 after-pressing rollers, diameter 70 mm Trimming unit HL84 / 0.8 kW - 2 motors, each 0.8 kW, 200 Hz, 12,000 rpm. - Motors can be manually swiveled for chamfer trimming Pre-milling unit 1.5 kW - 2 motors arranged one above the other, each 1.5 kW, 200 Hz, 12,000 rpm. Profile milling unit FK11, manual - For processing the edge overhang on the top and bottom edges of the workpiece and for milling the front and rear edges of the workpiece Belt sanding unit KS 10 - for sanding straight and solid wood edges, oscillating, sanding pressure manually adjustable Profile sanding unit PS 10 - sanding from below, for sanding profiles, sanding pressure manually adjustable Automation package Chamfer / Radius KAL210/6/A20 - Automatic adjustment of the infeed fence - Automatic adjustment of the pressure zone - Pneumatic adjustment from chamfer to straight trimming - Pneumatic adjustment of the trimming motors for flush or overhang trimming - Pneumatic adjustment of the pre-milling unit for flush or overhang milling - Automatic adjustment from chamfer to radius milling during profile milling - Pneumatic adjustment PN10 / FA11 - Electronic height adjustment

Condition: used, Year of construction: 2018, Vertical CNC boring and machining center Workpiece length 200 - 3,050 mm Workpiece width 70 - 850 mm Workpiece thickness 12 - 60 mm Milling spindle 1 unit Main spindle power 5 kW Max. speed 18,000-24,000 rpm (depending on configuration) Prodjzuw Dtopfx Abpja Tool interface HSK-F63 or ETP25 Tool changer 4-position magazine Vertical boring spindles 13 Horizontal boring spindles X 4 Horizontal boring spindles Y 2 Nut saw X-direction Control system Homag powerTouch / Power Control PC 86 Software WOODWOP 7.x Total connected power 11.5 kW Compressed air requirement 7 bar Machine weight approx. 1,580 kg Installation dimensions (L W H) approx. 2,950 1,984 1,895 mm CE marking

Condition: used, Technical specifications - Robust steel frame construction - Dust-protected linear guides - Digital servo drives on the X, Y, and Z axes - X-axis with rack and pinion drive - Y and Z axes with ball screws - Rapid traverse rate: X/Y axes: up to 50 m/min - Z-axis: up to 15 m/min - Maintenance-free servo motors with high-resolution encoders - Integrated extraction system for machining units Pjdozutp Sjpfx Abpera - Additional extraction connections - Manual loading and unloading of workpieces - Pneumatic positioning stop - Work area - Workpiece length: 200-3,050 mm (with roller conveyor) - Workpiece width: 50-1,250 mm - Workpiece thickness: 8-80 mm - Electrical data - Power supply: 400 V / 50 Hz - Optional equipment - Air-conditioned control cabinet for operation at temperatures above 35°C - ECO-Plus energy-saving mode with automatic standby, drive shutdown, and control shutdown

Condition: ready for operation (used), Year of construction: 1999, total height: 1,917 mm, total width: 1,200 mm, product length (max.): 9,295 mm, Edgebander manufactured in 1999. This HOMAG Optimat KL 78/A20/S2 features a panel formatting milling cutter, bevel and rounding milling cutter, groove saw, and edge draw blade. It accommodates workpieces with a thickness range of 8 to 60 mm and has a working height of 950 mm. If you are looking to get high-quality edging capabilities, consider the HOMAG Optimat KL 78/A20/S2 machine we have for sale. Contact us for further details. Psdpfx Aszuhc Hjbpera - Equipment: Panel formatting milling cutter, bevel and rounding milling cutter, groove saw, edge draw blade- Additional Equipment: Bühnen PU melting unit (with dedicated blue control box and temperature controllers)- Work Piece Length: min. 120 mm- Work Piece Width: min. 120 mm- Work Piece Thickness: min. 8 - max. 60 mm- Working Height: 950 mm- Machine Dimensions (from floor plan): Length 9295 mm, Total Height 1917 mm (approx. 2275 mm with open hood / noise enclosure open), Working line width approx. 1200 mm- Space Requirements: Length 9.6 m, Width min. 2.5 m, Height 2.3 m (flaps open)- Voltage: 400 V- Frequency: 50 Hz- Current: 55 A- Recommended Fuse: 63 A- Control Voltage: 24 V- Total Extraction Capacity: approx. 6010 m³/h- Air Speed: 28 m/sec- Compressed Air Consumption: approx. 816 NL/min- Pressure Drop: 200 mm WS- Electrical Connected Load: 32 kW- Extraction Connections: 3x Diameter 120 mm, 2x Diameter 60 mm

Year of construction: 2007, condition: ready for operation (used), This HOMAG WEEKE industrial production line was manufactured in 2007. It features a comprehensive setup for high-volume panel processing and edge-banding, including automatic loading systems, a central roller conveyor, multiple edge-banding modules, and a portal manipulator for stacking. Ideal for streamlined wood production, ensuring efficient handling and precision. Consider the opportunity to buy this HOMAG WEEKE industrial production line. Contact us for more information about this machine. • Core processing machines: • HOMAG Optimat KFL 525 • Units: pre-milling, gluing, trimming, radius units, scrapers, polishing • HOMAG control with touchscreen/keyboard • Sensors for board thickness and edge material detection • Large blue safety windows • HOMAG Optimat KFL 526 • Continuing trimming and polishing stations • Manual service access with lift-up covers • Controls & electrics: • HOMAG electrical cabinet with main switch • PLC, fuses, control boards, voltage/current meters • Safety control panels (stop, reset, feed, emergency stop) Pjdpfx Abszuhbispera • Condition: • Complete, physically connected line • Normal operational wear; no major damage visible • Full set of professional edge-banding aggregates installed Additional equipment • 2× Automatic loading systems: WEEKE OPTIMAT BST 500 D (2007) • Ser. no. 0–251–04–2756 (34 kW, 80 A) and 0–251–04–2755 (25 kW, 63 A) • Overhead gantry with vacuum lifting cups, automatic material alignment • Heavy-duty roller conveyor section • Transport/transfer system: HOMAG OPTIMAT TDL 310/25/12 (2007) • Ser. no. 0–205–10–1698 • Wide roller conveyor with safety guards • Cross-transfer and sorting sections • Integrated measuring and positioning units • Portal manipulator (stacker/unloader) • Overhead vacuum pick-and-place unit (orange) • Linear guiding with chain drive, dedicated motor drive • Automatic lifting and stacking of finished panels • Extraction/filtration • Strong industrial dust extraction along full line (yellow flexible hoses + metallic ducts) • Safety guarding • Complete set of safety guards across the line

Condition: ready for operation (used), Year of construction: 2005, total height: 2,300 mm, overall weight: 2,600 kg, product length (max.): 6,060 mm, This BRANDT OPTIMAT KDF 670 edgebander was manufactured in 2005. It features a comprehensive range of processing units including pre-milling, glue application, edge feeding and cutting, and polishing. Capable of handling workpiece thicknesses from 8 to 60 mm and edge bands up to 15 mm. Feed speed reaches up to 20 m/min, optimizing productivity. Consider the opportunity to buy this BRANDT OPTIMAT KDF 670 edgebander. Contact us for more information about this machine. Prjdpfx Abezug E Tspoa • Processing units / aggregates: • Pre-milling unit • Glue application unit • Edge feeding and cutting (roll/strip) • Pressure zone • End trimming unit • Top and bottom trimming unit (pre-milling + profiling) • Corner rounding unit • Scraper unit (profile scraper) • Glue joint scraper • Cleaning (solvent or spray system) • Polishing unit • Working capacity: • Workpiece thickness: 8–60 mm • Edge band thickness (rolls): 0.4–3 mm • Edge band thickness (strips): up to 12–15 mm • Feed speed: 8–18 m/min (up to 20 m/min depending on configuration) • Minimum workpiece width: • 70 mm (workpiece thickness 8–22 mm) • 120 mm (workpiece thickness 23–40 mm) • 150 mm (workpiece thickness 41–60 mm) • Maximum edge roll diameter: 830 mm • Electrical & power: • Total installed power: approx. 21 kW • Voltage: 400 V, 3-phase, 50 Hz

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 3,860 mm, travel distance Y-axis: 1,793 mm, travel distance Z-axis: 185 mm, number of axes: 3, overall weight: 4,300 kg, spindle motor power: 17,000 W, spindle speed (max.): 24,000 rpm, This 3-axis Weeke CE OPTIMAT BHC VENTURE 3 was manufactured in 2002. It features a powerful 17 kW main motor and a maximum spindle speed of 24,000 rpm. The working field measures 3250 × 1250 × 1215 mm, with a rapid traverse speed of 100/50/20 m/min. Ideal for diverse CNC woodworking tasks, it also requires 7 bar of compressed air and has a dust extraction capacity of 3170 m³/h. Contact us for more information about this machine. Prsdszugvfepfx Abpea • Electrical power: 400 V · 50 Hz · 3~+N · 17.5 kW · 35 A · 24 V • Milling spindle: 1 unit • Working field (X/Y/Z): 3250 × 1250 × 1215 mm • Rapid traverse speed (X/Y/Z): 100 / 50 / 20 m/min • Routing area: 3595 × 1378 × 125 mm • Alternative operation area: 1450 mm • Two-field operation area: 1100 mm • Compressed air required: 7 bar • Dust extraction (minimum): 3170 m³/h

Condition: used, Dimter OptiCut 700 automatic optimising cross-cut saw (sliding saw) for cutting very wide timber to size according to defects (marked with fluorescent chalk) and length. Podpfx Aozryvajbpora Technical data: - Cutting height: max. 120 mm - Feed length: max. 5,500 mm - Cutting width: max. 700 mm - Saw blade diameter: max. 700 mm

Condition: used, Weinig OptiCut 260 optimisation cross-cut saw for cutting timber to length and removing sections with defects (marked with fluorescent chalk). The separate measuring station records the lengths and marked defects. Prodpfxezryupj Abpea Technical data: - Cutting height: 260 mm - Saw blade diameter: 500 mm - Input length: 400 – 6,300 mm - Input thickness: 12 – 80 mm - Feed rate: max. 250 m/min - Cycle time: approx. 1 sec - Saw motor: 7.5 kW - Marking station: 5,000 mm - Outfeed conveyor: 7.5 m with 3 pneumatic ejectors - Control system: OptiCom Pro

Condition: used, The robust Optimum B 23 Pro bench drill for drilling into wood, metal or other materials, featuring a quick-action chuck. Psdpfozrytlsx Abpjra Technical data: - Spindle mount: MK 2 - Rated power: 750 W // 400 V // 50 Hz

Condition: excellent (used), Hitachi X-MET8000 Optimum – Handheld XRF Spectrometer The device has only 119 measurements!!! For sale is a professional, portable Hitachi X-MET8000 Optimum (Oxford Instruments) X-ray fluorescence spectrometer from 2017, designed for fast and non-destructive analysis of elemental composition and identification of metal alloys. Device condition: very good. The spectrometer is offered in a comprehensive set, including a carrying case, two batteries, a charger/power supply, accessories, documentation, and certified reference material from MBH Analytical. The device is equipped with Alloy_FP and Alloy_LE_FP calibrations. The Optimum model uses an SDD detector and a 6-position filter system, and its analytical range covers elements from Mg to U. Key data: Manufacturer: Hitachi High-Tech / Oxford Instruments Model: X-MET8000 Optimum Year of manufacture: 2017 Technology: XRF – X-ray fluorescence Condition: very good Calibrations: Alloy_FP, Alloy_LE_FP Elemental range: Mg–U Weight: approx. 1.5 kg with battery. The device has 119 measurements!!! Psdpfjztpu Isx Abpera

Condition: ready for operation (used), Year of construction: 2018, spindle speed (max.): 2,000 rpm, spindle motor power: 5,500 W, total height: 1,550 mm, total width: 1,065 mm, overall weight: 1,720 kg, product length (max.): 2,215 mm, number of axes: 2, Manual lead screw and feed rod lathe manufactured in 2018. This Optimum TH 4610 features a distance between centers of 1060 mm and a swing over bed of 460 mm. It has a spindle speed range of 25 – 2000 U/min and can handle a maximum workpiece weight of 300 kg. If you are looking to get high-quality turning capabilities, consider the Optimum TH 4610 machine we have for sale. Contact us for further details. Psdpfx Aezq Edgobpjra - Machine Type: Manual lead screw and feed rod lathe with digital position indicator- Distance Between Centers: 1060 mm- Center Height: 230 mm- Swing Over Bed: 460 mm- Swing Over Slide: 270 mm- Turning Length: 240 mm- Main Spindle Bore: 58 mm- Max. Workpiece Weight: 300 kg- Morse Taper of Main Spindle: MK6 / MT6- Spindle Speed Range: 25 – 2000 U/min (rpm)- Cross Slide Travel: 285 mm- Top Slide Travel: 125 mm- Quill Diameter: 60 mm- Quill Travel: 130 mm- Taper in Quill: MK4 / MT4- Three-Jaw Chuck Diameter: approx. 200 mm- Dimensions (L x H x W): 2215 mm x 1550 mm x 1065 mm- Motor Power: 5.5 kW- Voltage / Frequency: 400 V / ~50 Hz

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 820 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 400 mm, total height: 2,300 mm, total width: 2,160 mm, table width: 254 mm, table length: 1,370 mm, table load: 300 kg, overall weight: 1,260 kg, spindle speed (max.): 4,200 rpm, product length (max.): 2,400 mm, number of axes: 3, This 3-axis Optimum MF 4-B was manufactured in 2018. It features a maximum drilling capacity of 24 mm and a cutter head size of up to 76 mm. The machine includes a robust cross table size of 1370 x 254 mm and a maximum spindle speed of 4200 rpm. If you are looking to get high-quality milling capabilities, consider the Optimum MF 4-B milling and drilling machine we have for sale. Contact us for further details. - Description: 3-axis manual conventional milling and drilling machine with sleeve feed, tiltable milling head, rotatable spindle head carrier and position indicator- Face Cutter Capacity: max. Ø 76 mm- End Mill Capacity: max. Ø 25 mm- Drilling Capacity (Steel S235JR): Ø 24 mm- Continuous Drilling Capacity (Steel S235JR): Ø 20 mm- Throat Depth: 0 - 420 mm- Quill / Sleeve Stroke: 127 mm- Spindle Taper: ISO 40 - DIN 2080- Spindle Speed: 60 - 4200 rpm (min-1)- Gear Steps: 2 / continuously variable in steps- Automatic Quill Feeds: 0.04 | 0.08 | 0.15 mm/rev- Motor Power: 2.2 kW | 400 V - 50 Hz- Milling Head Tilt (Front / Back): +/- 45 degrees- Milling Head Tilt (Left / Right): +/- 90 degrees (horizontal)- Ram Overarm Travel: 470 mm- Distance Spindle to Table: max. 405 mm- Table T-Slot Size / Pitch / Qty: 16 mm / 63 mm / 3- X-Axis Travel (Manual / Power Feed): 820 mm / 740 mm- Y-Axis Table Travel (Manual / Power Feed): 410 mm / 330 mm- Z-Axis Knee Travel (Manual / Power Feed): 400 mm / 320 mm- Main Motor Power: 2.2 kW (400 V / 3 Ph / 50 Hz)- Coolant Pump Power: 90 W- Included Accessories: Coolant system, chip tray, and operating tools Technical Specification Taper Size ISO 40 Pedpfezq Dk Eex Abpjra

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 800 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 406 mm, total height: 2,150 mm, total width: 1,450 mm, table width: 230 mm, table length: 1,244 mm, table load: 230 kg, overall weight: 950 kg, spindle speed (max.): 5,100 rpm, product length (max.): 1,400 mm, number of axes: 3, This 3-axis Optimum OPTImill MF 2V was manufactured in 2017. It features a maximum vertical spindle speed of 5100 rpm and a cutter head size of 76 mm. The machine includes a horizontal milling table with a length of 1244 mm and a maximum load capacity of 230 kg. If you are looking to get high-quality milling capabilities, consider the Optimum OPTImill MF 2V drilling and milling machine we have for sale. Contact us for further details. Prjdpfozq A A Hsx Abpea - Type: Manual multifunctional 3-axis drilling and milling machine- Digital Readout: DPA 21- Modifications / Upgrades: Drive Upgrade- Total Connected Load: Approx. 1.5 kW (may be higher due to modifications)- Electrical Voltage: 400 V- Phases: 3 Ph- Current Type: ~- Mains Frequency: 50 Hz- Cutter Head Size Max.: 76 mm- End Mill Size Max.: 18 mm- Vertical Spindle Throat/Reach: 233 - 533 mm- Vertical Spindle Tool Holder: ISO 40 DIN 2080- Vertical Spindle Speed Range: 10 - 5100 rpm- Vertical Spindle Number of Speed Ranges: 6- Vertical Spindle Speed Control: Electronically adjustable- Horizontal Milling Table Length: 1244 mm- Horizontal Milling Table Width: 230 mm- Distance Vertical Spindle to Horizontal Table Min.: 57 mm- Distance Vertical Spindle to Horizontal Table Max.: 463 mm- Horizontal Table T-Slot Size: 16 mm- Horizontal Table T-Slot Number: 3- Horizontal Table T-Slot Distance: 63 mm- Horizontal Table Max. Load Capacity: 230 kg- Number of Coolant Pumps: 800 mm automatic- Vertical Spindle Continuous Duty S1 Drive Motor Power: 1.5 kW- X-Axis Travel Automatic: 24 mm- Y-Axis Travel Automatic: 20 mm- Spindle Speeds: Stepless speed control- Drilling/Milling Head Inclination: Tiltable ± 45°- Reach / Throat: 215 - 533 mm MF 2Vario DPA- Drilling Depth Stop: Adjustable with millimeter scale, readable from the front- Protective Shield: Height-adjustable, large dimensions- X-Axis: Motorized table feed, stepless speed control, rapid traverse, right/left rotation, cross table

Condition: good (used), Year of construction: 2006, I sell the automatic pneumatic optimising end cutting saw PAUL 11 MKL MAXI 5 Premium Year 2006 Input table automatic (throughfeed system) Outut table automatic 6 pcs. kickers on left outfeed table Optimising with mistakes deffect reading and automatic cutting sequence modes. Available immediately. Prsdpfx Aozraaxjbpoa CE version. Documentation included.

Condition: ready for operation (used), Year of construction: 2016, controller manufacturer: SIEMENS, overall weight: 6,020 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 13,000 W, number of axes: 3, This 3-axis Optimum F310 vertical machining centre was manufactured in 2016. It features a maximum spindle speed of 10,000 rpm and a spindle motor power of 13 kW. The machine is equipped with a CNC-controlled dividing head with 2 rotary axes, which has never been used. If you are looking to get high-quality machining capabilities, consider the Optimum F310 machine we have for sale. Contact us for further details. • Total connected load: 25 kW • Power supply: 400 V / 50 Hz Predpfx Ajzl Edvjbpea • Spindle status: Repaired; cover not reinstalled • Machine status: Under power Additional equipment • CNC-controlled dividing head (rotary table) with 2 rotary axes; never used

Condition: used, Year of construction: 2007, total height: 1,200 mm, total length: 3,600 mm, total width: 1,480 mm, Colour: Grey - Machine available from: 2025-12-15 - Year: 2007 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: - Number of units [pcs]: 8 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Radius scraping unit Prjdpfx Asx Ei Syjbpoa - - Tools available: Yes - └ 7th unit type: Flat scraping unit - - Tools available: Yes - └ 8th unit type: Brushing unit - Voltage [V]: 400 - Current consumption [A]: 50 - Transport dimensions: 3600mm x 1480mm x 1200mm (l x w x h) - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: like new (used), Year of construction: 2021, fuel type: gasoline, empty load weight: 68 kg, Several very neat joint filling machines for sale: Weight: 68 kg Honda engine, petrol with water connection. 8 brushes. height adjustable. Price: € 1.250,- incl. VAT Psdpfx Ajzc R Ucobpjra Several in stock!

Condition: ready for operation (used), Year of construction: 1998, spindle speed (max.): 2,244 rpm, travel distance X-axis: 245 mm, travel distance Z-axis: 610 mm, overall weight: 2,530 kg, number of slots in tool magazine: 6, number of axes: 2, Horizontal turning machine manufactured in 1998. This KOVOSVIT MAS OPTIMAT A50CA weighs 2530 kg and includes a bar feeder system with a long loading channel attached to the machine. If you are looking to get high-quality turning capabilities, consider the KOVOSVIT MAS OPTIMAT A50CA machine we have for sale. Contact us for further details. Pedjzhw H Uopfx Abpjra - Weight: 2530 kg- Control: Curve- Spindle diameter: 52 (60) mm- Spindle speed: 68 – 2,244- Number of tools: 4 side-cutting slides- 6 tool stations on the turret- Special feature: Iemca loading magazine- Included Components: Bar feeder system (long loading channel attached to the machine) Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2002, spindle speed (max.): 2,818 rpm, travel distance X-axis: 110 mm, travel distance Z-axis: 310 mm, overall weight: 2,505 kg, number of slots in tool magazine: 6, number of axes: 2, Horizontal turning machine manufactured in 2002. This KOVOSVIT MAS Optimat A42 features a robust design with a weight of 2505 kg and a total power consumption of 12 kVA. It is equipped with a manual guide bar/tube loading support system for enhanced functionality. If you are looking to get high-quality turning capabilities, consider the KOVOSVIT MAS Optimat A42 machine we have for sale. Contact us for further details. - Main Phase Voltage: 3x 400 V ~- Rated Current: 26 A- Total Power Consumption: 12 kVA- Frequency: 50 Hz- Control Circuit Voltage (AC): 110 V ~- Control Circuit Voltage (DC): 24 V =- Machine Lighting Voltage: 220 V- Machine Lighting Wattage: 2x 20 W- Control: Curve- Spindle diameter: 42 (50) mm- Spindle speed: 85 – 2,818- Number of tools: 4 side-cutting tools- 6 tool stations on the turret- Schematic / Diagram Reference: SCH 338 / 40004 - 34- Bar Feed Equipment: Fitted with manual guide bar/tube loading support system Technical Specification Counter Spindle No Driven Tools No Pjdpfx Abszhwcpspjra