Used Ott Profimatic for sale (69)

Condition: used, Frequency converter, frequency converter, drive converter, controller, variable speed drive -Input: 380 V 6.5 kW -Output: 220 V 200 Hz -Power: 6.5 kW -for edge banding edge banding machine -Dimensions: 330/650/H270 mm -Weight: 105 kg Ndjdpfeu I Hn Njx Aa Isc

Condition: good (used), Year of construction: 1992, functionality: fully functional, working width: 1,300 mm, Wide belt sander Manufacturer Ott Model RSO-1300 Year of manufacture 1992 Working width 1300mm with roller 15 kw and shoe 11 kw Nsdsw Enntepfx Aa Iodc +brush Feed speed 10m & 20m

Condition: excellent (used), Year of construction: 2001, Ott Atlantic V/12 edge banding machine Joining unit snipping, 2 x routing, radius scraper, surface scraper Edge thickness: 0.2 - 12 mm Workpiece width min.: 70 mm Ndjdpfx Aaotdz Tqe Iec Workpiece height: 8-42 mm Feed speed: 12 m/min. Condition very little used year of construction 2001 price 10000

Condition: excellent (used), Adhesive unit Guillotine Chop saws Straight cutters Ndodpfx Asrzaavja Iec Scraper Polishing machine Without pre-milling

Condition: used, Veneer press OTT Ndjdpfjvdaymjx Aa Isc Type JU 60S Pressing area max. 225x120 cm Electric

Condition: not inspected (used), Year of construction: 1975, Power supply 400V 13kW 2 heating plates à 1200 x 2250 mm heating plates controlled by 2 thermostats pressing pressure at 250 bar LxDxH: 2590 x 1330 x 1950 mm weight approx. 2800 kg pressing thickness 380 mm Njdpfx Aekkflboa Iedc

Condition: used, Year of construction: 1984, Special pressing size, large pressing depth 1600 mm Pressing length 2750 mm Plate size 2750 mm x 1600 mm - 2.75 x 1.60 m - with 3 heating plates 2 levels incl. control system – newly retrofitted retrofitted Used, in good condition Manufacturer: Ott Model 300 K 135 Year of manufacture: 1984 Machine number: 13741 Number of levels: 2 pieces Cover sheets hard-anodized Plate size approx. 2750 mm x 1600 mm Ndodpfxev Hhudo Aa Isc Opening width approx. 185 mm Tip control Safety cable below Side guidance Electrical heating Specific pressing pressure max. 5.5 Piston diameter 90 mm Lower pistons: 6 units Original price approx. €40,000 Space required approx. 3600 mm x 1600 mm x 2000 mm Total connected load 49 kW Storage location: 97447 Gerolzhofen, loaded free, unpacked Delivery in the current as-inspected condition, without warranty or guarantee

Year of construction: 1981, condition: ready for operation (used), Hydraulic press with conveyor belt feeding and block tipper Pressing area 122cm x 420cm Ndjdehyc N Tepfx Aa Ijc

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Ott Atlantic V6 edge banding machine capping, 2 x milling, radius scraper, cleaning disks Edge thickness: 0.2 - 6 mm Workpiece width min.: 70 mm Workpiece height: 8-42 mm Feed speed: 12 m/min. Ndjdpfxor Elhve Aa Iec Condition very little used year of construction 1999 price 5500.-

Condition: excellent (used), 2 pre-cutters gluing unit Guillotine Drip unit with 2 saws Straight cutter Ndodeulh Nuopfx Aa Ioc Rounding cutter

Condition: excellent (used), Year of construction: 1981, Suitable for sanding – calibrating solid wood and fine sanding of veneer as well as stained or lacquered parts Nsdpfxjwu H Uds Aa Iodc Maximum working width 1100 mm Maximum workpiece thickness 150 mm 1 sanding belt combination unit Calibration roller diameter 120 mm with spirally mounted 90 Shore rubber coating and sanding pad unit Brush roller at the outfeed Minimum workpiece thickness 2 mm Sanding belt dimensions 1120 mm x 1900 mm Sanding belt speed 25 m/sec Infinitely variable feed speed 3–18 m/min Sanding unit motor power 15 kW Feed motor power 1.5 kW Table height adjustment motor power 0.8 kW Total power requirement 17.5 kW Operating pressure 6 bar Extraction nozzle diameter 1 x 250 mm + 1 x 160 mm With extraction distribution

Condition: reconditioned (used), Year of construction: 1991, functionality: fully functional, grinding width: 1,100 mm, "M.-No. 2679, built 1991, Technical data: max. working width: 1100 mm, min./max. workpiece thickness: 3 / 160 mm, sanding belt dimensions: 2150 x 1120 mm, sanding belt speed: 18 m/sec., feed speeds: 4 + 8 m/min, Motor power sanding unit: 11 kW, power setting: 0.55 kW, feed carpet: 1.3/1.8 kW, operating pressure: 6 bar, air requirement: 10 l/min., extraction sockets: 1 x 150 + 1 x 120 mm, WxDxH: 1800 x 2000 x 2100 mm, weight approx. 2400 kg, Standard equipment: - Contact roller D=150 mm, hardness 90° Shore - Air sanding pad with automatic insertion and removal - Rigid sanding pad for solid wood frame sanding - Brush roller driven by the sanding unit - Automatic centering of the feed carpet - Feed carpet with high-quality rubber circular hole carpet and auto. Carpet centering - pneumatic sanding belt tensioning with length compensation - non-contact sanding belt oscillation, electronic - low-wear disc brake system for immediate stop of the sanding belt drive with pressure monitor - motorized thickness adjustment with digital display - workpiece thickness limiter at the infeed - semi-automatic workpiece thickness adjustment - grit thickness compensation for contact roller 4-fold, special accessory: workpiece thickness gauge". Ndodjtppz Ispfx Aa Ioc

Condition: used, Year of construction: 1993, with prejoiningused, good conditionmake Otttype Kantomat 156- FÜyear 1993glue thickness 15 mmworkpiece height min 10 mm max 60 mmworkpiece width min 60 mmworkpiece length min 60/160 mmthick edges up to 3 mmcaps from the roll up to 3 mmprejoiningcross-cutting unit K 14 / 2 x 1,1 PSflush milling HF15.1 2 x 1,5 PSChamfer 082 2 x 0,8 PS 0-45° swivelingRadius milling 2 x 0,8 PSRadius scraper controlled pneumaticBuffing oscillating pneum. with pneum. feed 2 x 0,3 HPautom. edge magazinefeed speed steplessgranulate quick heating basinsound insulation hoodlarge roller supportsuction connection D 160 mmspace requirement approx. 7400 mm x 1000 mm x 1600 mmtotal connected load 22 kWstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without guarantee and warranty Ndsdpfx Asvwfyfea Isc

Condition: good (used), Year of construction: 2002, Edge banding machine with Fuegefraesen otherwise fully equipped PU glue is suitable Nsdpfxjgmn H Aj Aa Ijdc

Condition: ready for operation (used), Manufacturer: OTT Type: TKS Ndodpfxshir A He Aa Iec working height: 800 mm Dimension: W 1.060 x L 720 x H 930 mm weight approx.: 120 kg Condition: used

Condition: ready for operation (used), Year of construction: 2003, operating hours: 601 h, functionality: fully functional, machine/vehicle number: C/70001, workpiece height (max.): 42 mm, edge thickness (max.): 3 mm, product length (min.): 160 mm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Workpiece height: 8 - 42 mm Workpiece width: min. 70 mm Workpiece length (strip edges): min. 160 mm Workpiece length (endless roll): min. 60 mm Workpiece length (with double end-cutting device): min. 150 mm Edge parameters Edge thickness: max. 3 mm Edging thickness: 0.2 - 12 mm Working height and speed Working height: 800 mm Feed speed: 12 m/min Nodpfxowlquve Aa Iodc Adhesive application Adhesive application: via application roller Process: Hot melt adhesive, hot-cold process, single-sided, right-hand design Heating time of adhesive tank: 8 min MACHINE DETAILS Total connected load: 12.5 kW Total weight: 2,100 kg Total length: 5,300 mm Total width: 900 mm Total height: 1,300 mm Operating voltage: 400 V, 50 Hz Input current: 400 A Compressed air connection: 6 bar Air connection: 6 bar, 1/4" Extraction connection: 1 x central extraction nozzle, diameter: 160 mm UNITS - Jointing unit with 2 HF motors, 1.5 kW each, 12,000 rpm, automatically controlled, including DIA MAX DIA jointing set Ø 85 x 30 x 42 mm, 3 teeth (LEUCO system), for panel thicknesses up to 42 mm - Double cross-cutting unit with 2 HF motors, 0.3 kW each, 12,000 rpm, 2 automatic positions (0° / 3°), 2 carbide saw blades Ø 140 x 3.2 x 16 mm Z 36 - Flush trimming machine with 2 HF motors, 0.43 kW each, 12,000 rpm, for solid and plastic edges, single-sided scanning, 2 carbide insert heads Ø 70 x 20 x 16 mm, Z 4 - Fine trimming machine with 2 HF motors, 0.3 kW each, 12,000 rpm, double-sided scanning, quick-change device, 2 AT 73 carbide rounding cutter heads Ø 73 x 16 x 16 mm, Z 3, profile knives R2 – R5 - Scraper with double-sided scanning, automatic control, for PVC and plastic edges - Corner rounding machine with 2 motors, 0.35 kW each, 12,000 rpm, 200 Hz, double-sided scanning, 1 work spindle each top/bottom AR 73 radius cutter heads Ø 73 x 16 x 16 mm, 3 teeth, profile cutters R2 – R5 EQUIPMENT - Double-roll top pressure with electronic positioning - Single feed for strip and solid edges - Automatic roll magazine for rolls up to 800 mm in diameter, with pneumatic cutting device up to 3 mm thick - Rapid heating tank for hot melt adhesive granules, with electronic temperature control - Automatic reversal of adhesive dosing via PLC (same and counter-rotating) - Automatic infeed guide, no manual adjustment of edge thickness required - Central control via PLC-controlled control panel, including plain-text error display - Program memory with name and number programs

Condition: reconditioned (used), functionality: fully functional, power: 9 kW (12.24 HP), Ott veneer press connected load 380V 9kW Nedetwp Iwopfx Aa Isdc Panel size 2250 x 1350 mm Elkom heating plates, gold anodized Plates and hydraulics in order

Condition: reconditioned (used), Year of construction: 1995, functionality: fully functional, Nominal volume flow Vnenn 750 m³/h, suction nozzle D=100 mm, minimum volume flow Vmin 565 m³/h, negative pressure 14.5 mbar, motor 1.1 kW, nominal speed 2860 rpm, connection 380V 3Ph 50Hz - Nedpfx Aasv Azfze Ijdc

Condition: used, functionality: fully functional, 0,75 kW Spraying device Lamella star 150/70/25 mm sisal/leather/plastic fabric Ndedpfxsigaf Rs Aa Ijc Lamellar star 150/70/25 mm sisal/plastic fabric Flanges 70 mm reduced to 11 mm (2 pcs.) Metal Control panel top 4 motors à 0,18 kW for brushes