Used Pad Printer for sale (3,691)

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2026, operating hours: 200 h, total length: 2,128 mm, total width: 1,294 mm, input voltage: 400 V, warranty duration: 6 months, input current: 32 A, laser power: 100 W, tank capacity: 32 l, volume flow: 20 m³/h, Polyamide laser sintering system including two interchangeable containers and unpacking station. The machine can be inspected and tested at any time at the BIBUS Austria demonstration center. Furthermore, the system features a quick-change mechanism between recoating blade and coater roller – the system is always up to date with the latest technology due to continuous upgrades. Tedpfx Aeqwkypjired

Condition: used, functionality: fully functional, Year of construction: 2020, total length: 950 mm, total height: 1,360 mm, total width: 700 mm, overall weight: 188 kg, feed length X-axis: 297 mm, feed length Y-axis: 210 mm, feed length Z-axis: 200 mm, We are offering this ready-to-use Keyence AGILISTA-3200W. All maintenance has been carried out by Keyence. A full service was recently performed by Keyence, and the printer has been in standby mode since. The printer is in excellent condition. Complete accessory set for immediate operation included: - 1x cartridge of print material - 1x cartridge of support material - 3x waste containers - 1x rinse tank for printed parts - Cleaning kit for parts and printer Viewing by appointment possible. On-site introduction/training available upon request. Technical specifications: - Print material: AR-M2 (transparent print material), AR-H1 (heat-resistant print material), AR-G1L (silicone rubber [low hardness]), AR-G1H (silicone rubber [high hardness]) - Support material: AR-S1 (water-soluble support material) - Build volume: 297 × 210 × 200 mm (DIN A4 size × 200 mm) - Resolution: 635 × 400 dpi - Layer thickness: High resolution AR-M2: 15 µm, standard resolution AR-M2: 20 µm, AR-H1: 20 µm, AR-G1L/H: 30 µm - Interface: Ethernet 10BASE-T / 100BASE-TX - Operation: color touch panel - Dimensions: 95 x 70 x 136 cm - Weight: 188 kg If you have any questions or require further information, please feel free to send us a message or give us a call. Tsdpfx Ajy Hmhheirsd

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: CON.07.10.0154, compressed air connection: 8 bar, input voltage: 230 V, total width: 1,329 mm, total length: 1,150 mm, total height: 1,725 mm, overall weight: 812 kg, pneumatic connection: 8 bar, Equipment: documentation/manual, 6-color pad printing machine from the manufacturer TAMPOPRINT, model Concentra 60-6 Max. printing area diameter (circle diameter) 55mm, total of 6 colors Year of manufacture 2010, weight 812 kg Air consumption 48 standard liters per cycle Good overall condition, machine fully functional, minimal air loss on one of the main valves. Visual condition as shown in the current photos. Scope of supply: TAMPOPRINT Concentra 60-6 as a stand model + Foot pedal + Hand crank for height adjustment of the tilting table + 6 used ink pots 60mm + 6 used printing rings (for the ink pots) + 2 used mounting tables (for ink pot and cliché mounting) + 2 used gripper tongs (for ink pot and cliché mounting) Tjdpfx Aiozwv Rworjd + 2 used pad coupling devices plus mounting screws (4 pad coupling devices still need to be purchased) + 1 heavy-duty hook for transporting the machine + Documentation (operating manual, parts list, wiring diagram) Option 1 6 additional used ink pots 60mm, EUR 420,- excl. VAT. Option 2 4 pad coupling devices (new) from the manufacturer, EUR 1,098,- Packaging: The machine can only be packaged by wrapping it completely in cardboard and bubble wrap; it will not be placed on a pallet. The pad printing machine can be inspected and tested in Pottendorf by appointment. Delivery: Ex works Pottendorf (Austria). For collection, only trucks with a tail lift are permitted; please note the machine's weight. The transport of this machine is at the buyer's expense and risk. Packaging costs EUR 120,- Selling price EUR 18,200,- excl. VAT. New price approx. EUR 70,000,-

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: PL031303405S, For sale is a single unit consisting of a textile carousel with a matching conveyor dryer: M&R Sportsman EX 8/6 textile carousel, built in 2013 Total print count: 1,168,378 Diameter: 386 cm Weight: 1,497 kg Power supply: 380 V Pallets: Textile - 40 x 55 cm, 8 pieces Tedpov Iy H Ijfx Airod Pockets - 30 x 40 cm, 8 pieces Sleeves - 15/12 x 40 cm, 8 pieces Squeegees: 6 x flood and 6 x pressure squeegees Screen fit with TRI-LOC M&R Radicure D 36/6-3 conveyor dryer, built in 2012 Conveyor width: 91 cm Drying channel length: 183 cm Total width: 127 cm Total length: 305cm Weight: 817kg Power supply: 380V Price negotiable

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, • Realistic simulation of end products through the combination of different materials • Multi-material parts: Simultaneous application of different modeling materials • Mixed Tray: Production of various parts made of different materials in a single process step • Wide selection of FullCure® and composite materials: Photopolymer for model and support materials; dynamically generated Digital Materials™ • Numerous design and printing processes • Greater creativity through the use of multiple materials and composites with different material properties and color shades • Highest quality and accuracy • High-resolution 16-micron layers guarantee smooth surfaces and fine details • 350x350x200 mm large build platform for the production of various parts and assemblies • Suitable for use in an office environment TECHNICAL DATA - Layer thickness (Z-axis): up to 0.016 mm - Build platform (X x Y x Z): 350 x 350 x 200 mm - Build volume (X x Y x Z): 342 x 342 x 200 - Resolution X = 600 dpi, Y = 600 dpi, Z = 1600 dpi - Printing modes Digital Material (DM): 0.03 mm High Quality (HQ): 0.016 mm High Speed (HS): 0.03 mm - Accuracy: 0.1 - 0.3 mm typical - Model materials FullCure 720, universally applicable and transparent Vero, opaque material DurusWhite, polypropylene-like material Tango, rubber-like elastic material ACCESSORIES Spare parts Todpfxezw Emhe Aired new replacement print head (new price approx. €1,000)

Condition: not inspected (used), Large-format printer Manufacturer: EPSON Type: SureColor T5200 Resolution: 2,880 x 1,440 Maximum format: DIN A0 Maximum print format: 841 x 1,189 mm Tsdpj Aaq U Tjfx Aired Features: network-enabled Print function: borderless printing Ink cartridges: individual color cartridges Display type: LCD display Display size: 63 mm Memory size: 256 MB Condition: untested, two color cartridges need to be replaced, therefore no testing possible.

Condition: new, functionality: fully functional, Year of construction: 2026, Industrial SLS for real production work Fuse X1 brings production-scale SLS into a compact industrial system. Its large chamber supports full-size parts and dense batches, while thermal imaging, 13 independent thermal zones and Print Intelligence help maintain stable conditions throughout the build. Large-format builds A 61.5 L chamber provides 7.5 times the build volume of Fuse 1+ 30W for full-size prototypes and dense production runs. Production throughput A 120 W fiber laser and 30%+ packing density are designed to put more parts into each build and increase weekly output. Failure prevention Print Intelligence combines computer vision with Adaptive Temperature Control to detect anomalies and protect the rest of a build. Please request current lead time and current pricing. Buy your production system from people who live and breathe SLS. IM3D is not simply a Formlabs reseller. We are an SLS specialist and service-oriented partner with the technical depth to support your system before installation, during onboarding and throughout production. SLS is our field We focus on industrial SLS systems, powders and production workflows, not a broad catalogue of unrelated desktop printers. Maintenance knowledge We know what keeps SLS equipment productive and can help with preventive maintenance, troubleshooting and practical operator guidance. SLS-trained technicians Our technical team understands the complete process, from machine setup and parameter selection to stable day-to-day production. A complete production cell We help configure the printer, powder handling, post-processing, materials and service plan around the parts you need to make. Todpfx Ais Agcx Rsrod

Condition: used, Year of construction: 2018, Two identical inkjet printers are available, printhead: Mk11 Midi, nozzle size: 62µm, supported print lines: 1, 2 or 3, character height: 1.8-20mm, max. printing speed for 1 line, 5-pixel character height: 6.25m/s (0.47mm dot spacing), 1 line, 7-pixel character height: 4.89m/s (0.55mm dot spacing), 2 lines, 7-pixel character height: 2.09m/s (0.37mm dot spacing), 3 lines, 7-pixel character height: 1.01m/s (0.37mm dot spacing), max. characters per second: 2,222, recommended printhead distance from product: 12mm, printhead distance for carton coding: 35mm, printhead length: 223mm, printhead diameter: 42mm, housing material: stainless steel, protection rating: IP55, operating temperature: 5-45°C, operating temperature with Linx 1240 ink: 0-50°C, max. relative humidity: 90%, power supply: 100-230V AC, rated power: 150W, upper length: 440mm, lower length: 400mm, width: 355mm, height: 503mm, weight including fluids and printhead: 24kg, an on-site inspection is possible. Todpfx As Ad Nnyjirjd

Condition: good (used), Year of construction: 2014, The Agfa Anapurna H2500i LED is a high-speed, heavy-duty, wide-format hybrid UV LED-curable inkjet printer designed to handle both rigid boards and roll-to-roll flexible substrates Colour Confirguration: 6 colours + W In Production, demo possible RIP: non available Western Europe Tjdpfx Aisz Dw Axorod For further technical details refer to enclosed datda sheet. Maximum Print Width: 250 cm (8.2 ft) | Up to 247 cm (8.1 ft) for full borderless printing Rigid Media Length: Max 140 cm (4.59 ft) with one standard roller table. This extends up to 320 cm (10.5 ft) when using the default front and rear media extension tables Productivity & ThroughputDraft Mode: Up to 115 m²/h (1,238 ft²/h)Express Mode: 70 – 78 m²/hProduction Mode: 35 – 57 m²/hStandard Quality Mode: 21 – 31 m²/hHigh-Quality Mode: 16 – 17 m²/h

Condition: used, Year of construction: 2023, functionality: fully functional, In this listing, you are purchasing a second-hand “Fuji Acuity Prime L” flatbed printer Item for sale: 1 x Fuji Acuity Prime L Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or discolouration). The device has been tested to ensure it is in working order. A test print can be seen in the photo. Todpfx Asz Ay E Nsirsd Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you before dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: good (used), Year of construction: 2017, 3D Printer ORLAS CREATOR SLM250, MFG 2017,-the equipment shows little use; the tablet has a cracked screen; it does not have a 3D scanner component, SN: SLM250172801 makes complex parts, using metallic or non-metallic powders; wireless controller; benchmark dimensions achieved: 100 x 100 mm; gas used as protective atmosphere: argon/nitrogen; layer size: 20-100 micrometers; laser type: Yb Fiber Laser 250 W; wavelength: 1070 nanometers; Precision F-Theta lenses; dimensions: 717x858x1794 mm; mass: 470 kg; specific software: Creator user interface, APP Suite application "3D printing"; IMPORTANT: The equipment shows little use; the tablet has a cracked screen; it does not have a 3D scanner component; Specifications Building volume: ø = 110 mm x 100 mm Powder reservoir volume: ø = 110 mm x 200 mm High power 250W cw Yb: Fibre laser Wave length: 1070 nm High efficiency Exceptional beam quality and power stability Air cooled Spot size: 40 µm - 120 µm Process chamber • High-end process chamber, suitable for low-oxygen process environment • Recommended inert gas: Argon / Nitrogen • included extraction unit for cleaning of the process environment (max. flow rate: 190m³ / h) Coating system - 360° circulating coater for high efficient coating process - Rubber coating blade - Micrometre screws for optimum coater alignment User interface - 12’’ Microsoft Surface Pro 3 tablet controller - Unique wireless control concept - Easy control of all printing parameters - Cloud manufacturing concept Dimensions - System dimensions: 717 mm x 858 mm x 1794 mm - Machine opening: 450 mm x 180 mm - Power supply: (V/Ph/Hz): 230/1/50 - Power setting: max. 10 A - Weight: 430 kg CAD / CAM Software APP SUITE, including 3D printing application - solid slicing of 3D objects - extended repair functionality of 3D parts - automatic generation of support structures - complete control of all printing strategy Parameters Welcome Package - - APP SUITE Software Basic Package - - Accessories Zero-Point Clamping System - - Adjustment aid for aligning the construction platform - - Hose adapter for inert gas supply 6mm to 1/4inch - - Cleaning cloths and optics cleaning liquid Todpfxeunaqvs Aired - - ESD brush for safe system and component cleaning - - Allen key set - - Stainless steel shovel Price Euro 38,900 Euro + VAT, FCA: Bucharest/ Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: A7X5021000012, number of ink cartridges: 4, color channels: CMYK, resolution (max.): 600 dpi, space requirement width: 330 mm, counter reading (color): 5,03,000, For sale: a Konica Minolta C71cf roll-to-roll color label printer in good condition. It prints on various materials: vellum, coated paper, PP, PE, wine label stock, and PVC. The printer has only printed about 500 km. Currently connected and operational. We can also offer finishing equipment: Scorpio Plus SCR35PI, or Vorey VD320 Tsdpexuid Ssfx Airsd

Condition: excellent (used), Year of construction: 2019, BEAM MODULO 400 Todpfx Aiszvlhporsd Year Mfg 2019 Siemens Control Build Volume: Approximately 650 × 400 × 400 mm (or roughly 600 × 400 × 400 mm operational) with continuous 5-axis motion kinematics Laser Source: Ytterbium fiber laser options ranging from 500 W up to 2 kW Deposition Heads/Nozzles: Supports an automatic tool changer to swap between different heads (e.g., the 10Vx for fine precision down to 0.1 mm and the 24Vx for higher deposition rates) without stopping production Powder Delivery: Equipped with a vibrating multi-hopper powder feeder system capable of managing up to 4 or 5 separate material feed options

Condition: not inspected (used), Year of construction: 2022, Leased return. No further data available. Serial no. FPR4012012202007256 Based on the original invoice: No guarantee or warranty that this corresponds to the actual condition. • 1x Markforged Onyx Pro 3D printer • EIGER Software Cloud online version included • EIGER Software Desktop online version included • Early access to new features • 1x Onyx filament 800 cm³ • 1x Glass fiber filament 50 cm³ • 3x FFF quick-change nozzle • 3x CFF quick-change nozzle • 1x Markforged Drybox for material storage Todpfxszu Iupj Airjd Stock ID 13373665 Approximate transport dimensions: 80x60x45, approx. 30 kg

Condition: excellent (used), Year of construction: 2011, Pad printing machine TIC PCK4PM165PC Inkjet printing machine, floor model, clear display with microprocessor control, electro-pneumatically controlled, with pad displacement, electro-pneumatically controlled, closed ink system, with integrated cleaning station, ink cup ø 140 mm, cliché size WxD: 4 x 150 x 320 mm, height-adjustable cross feed table via spindle, with lateral safety discs as well as emergency/off button and foot switch, required connection: compressed air 6 bar, 230V, 50Hz,pad contact pressure: 270 at 6 bar, second-hand, year of manufacture 2011, good condition. Tjdpfx Asua Efnjirod

Condition: excellent (used), Year of construction: 2017, operating hours: 150 h, functionality: limited functionality, UV printer with Toshiba printheads Print width 180 cm Todpjw R Uxzefx Airsd

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: X7QP000006, paper width (max.): 1,620 mm, Epson SureColor SC-R5010L wide-format resin inkjet printer in good working condition, available for immediate sale. Key Details (from machine label & display): Model: SC-R5010L / K391A Todpfoytrfdsx Airjd Serial No.: X7QP000006 Power: 200–240V / 50–60Hz (European spec, CE certified) Operation Report (as shown on screen): Total Print Area: 38,231.59 m² Total Media Feed Length: 33,162.7 m Total Carriage Pass: 4,060,051 Printer Features: UltraChrome RS resin ink system (6 colours + Optimizer + Maintenance Liquid) Dual bulk ink unit (2 × 1.5L pouches with hot-swap function) PrecisionCore Micro TFP printhead 64" (162 cm) print width Odourless, water-based resin ink – suitable for vinyl, banner, textile, canvas, wallpaper, film Immediate lamination capability LCD touchscreen control panel Nozzle check printed on date of listing (11.03.2026) – all colour channels firing Included: Printer main unit with bulk ink system Auto take-up reel system All ink channels present Extra inks that we have in-house The printer is located on a pallet. Inspection welcome. Suitable for signage, wide-format print shops, wallpaper and production environments.

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand “Canon imagePROGRAF GP-4000” large-format printer Item for sale: 1 x Canon imagePROGRAF GP-4000 with the following specifications: incl. roll unit incl. roll holder set incl. WT36-600 Not the right configuration? We can easily configure the machine to your requirements. Please feel free to contact us! Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). The unit has been tested to ensure it is in working order Packaging and dispatch: Tjdpez Et T Nefx Airsd You are welcome to view the unit during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: like new (used), functionality: fully functional, machine/vehicle number: GEADDL-MLAB-G02-900028, Year of construction: 2021, operating hours: 800 h, total length: 1,220 mm, total height: 1,850 mm, total width: 705 mm, type of input current: AC, overall weight: 700 kg, input voltage: 230 V, input current: 7 A, input frequency: 50 Hz, laser power: 100 W, ambient temperature (min.): 15 °C, ambient temperature (max.): 30 °C, table width: 90 mm, table length: 90 mm, We offer this showroom Concept Laser Mlab 100R metal 3D printer - Laser Powder Bed Fusion system (LPBF / SLM) Specification: - Manufacturer: Colibrium Additive / GE Additive / Concept Laser from Lichtenfels, Germany - 100 W singlelaser, 2D optics ScanLab - Build envelope: 90 x 90 x 80 mm - Max. scanning speed: 7 m/s - Focus diameter: 50 μm - Layer thickness: 15 - 50 μm - Connected loads: 1,5 kW; Power supply 1/N/PE AC 230 V, 16 A connector - Inert gas supply: 1 gas connection provided - Ar or N2 (machine was used with argon mostly) Tsdpfoz Tut Usx Aired - Filtering system: integrated - Dimensions 705 x 1220 x 1848 mm (W x D x H) - Weight: approx. 600 kg - Operating conditions: 15 - 30°C - Holders for different recoater blades types included - A few stainless steel build plates included Includes material parameters for: - Remanium star CoCr alloy, - Parameters for other materials can be inquired from manufacturer. (316L, 17-4 PH, TiAl6V4, CpTi,...) Machine has been used with remanium star only. It is biomedically clean. Age and condition: like new Machine installed at showroom in 2021 for demonstration purposes only: Building demo parts for potential customers, buildjobs at trade fairs and our customer open days. Basically, not more than 5% usage of what could be expected of its age. Maintained by certified service technician only. All manufacturers service safety patches and updates until this date have been applied. Machine clock: 800 hours - not a "Laser ON time", that is expected significantly lower. Original price: 100.000 Eur Optional auxiliary equipment (not included in listing price): - Nitrogen generator with integrated compressor: Parker HPN2-12500C-E - no need for compressed air + 3.000 Eur - Table sieving station Retsch AS 200 + 1.000 Eur - Isolation transformer - needed if machine is connected to home-grade (30 mA) breaker. + 1.000 Eur If you have any questions or need more information, feel free to send us a message or give us a call. Video conference can be set up if needed. Machine can be seen at our showroom. Visit is possible upon contact. Misan is Czech authorized reseller for metal AM machines.

Condition: used, 3D SYSTEMS Professional MultiJet 3D Printer / MJP System 3D Systems ProJet MJP 2500 Plus MultiJet Printing with HD and UHD print modes For sale is a used, professional 3D printer from the manufacturer 3D Systems. The ProJet MJP 2500 Plus is suitable for producing precise plastic components, functional prototypes, concept models, as well as fixtures and tooling applications. Technical data: Manufacturer: 3D Systems Model: ProJet MJP 2500 Plus Technology: MultiJet Printing (MJP) Print modes: HD / UHD Max. build volume: 294 × 211 × 144 mm HD resolution: 800 × 900 × 790 DPI Tedoz Erdaopfx Airod Layer thickness HD: 32 µm UHD resolution: 1600 × 900 × 790 DPI Layer thickness UHD: 32 µm Dimensions (W × D × H): 1120 × 740 × 1070 mm Weight: 211 kg Power supply: 200–240 V / 50 Hz / 1-phase / 10 A Internal hard drive: at least 500 GB Operating temperature: 18–28 °C Interfaces: Ethernet / USB Equipment: Integrated touch display Material system for build and support material Automatic switching of material cartridges Network connection USB connection 3D Sprint software support Material containers as shown in the pictures Application areas: Functional prototypes Concept models Form and fit testing Fixtures and holders Tooling applications Product development Additive manufacturing Scope of delivery: 1 × 3D Systems ProJet MJP 2500 Plus Material containers as shown in the pictures Additional accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures Shipping via freight forwarder is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: excellent (used), Year of construction: 2002, Tampoflex TF 150 E tampon printing machine cliché board: 400x250mm tampoprint control voltage: 230v 50Hz air: 4-6 bar Todpfeh Rv Sijx Airsd machine dimensions: 1200x1600x600 weight: 240 kg

Condition: used, functionality: fully functional, Well-maintained Roland VersaUV LEJ-640 UV hybrid printer in good working condition. This versatile printer can print directly onto a wide range of rigid and flexible materials, delivering high-quality, vibrant results with Roland's UV-LED technology. Ideal for signage, promotional products, packaging prototypes, displays, and specialty graphics. Tedpfx Aezw U Uboirod The printer has had regular professional maintenance throughout its lifetime and has been operated by a single owner since new. It has been carefully maintained to ensure reliable performance and consistent print quality. Key features: UV-LED hybrid printing technology Prints on both rigid and roll media CMYK + White + Gloss capabilities Suitable for a wide range of substrates Regularly serviced and maintained One-owner machine Reliable and proven production printer Available for inspection and test printing. Please contact us for additional information, photos, or pricing.

Condition: like new (used), Year of construction: 2014, operating hours: 100 h, Used ProJet SD6000 3D printing machine using stereolithographic technology. The machine has had extremely low hours usage during its life so far, having been installed and minimally utilised from time to time for research projects at the University of Sheffield AMRC research department known as the “Factory of the Future”. Serial # 10311178101 Year 2014 MACHINE CONSTRUCTION & FEATURES The ProJet 6000 HD SLA 3D provides SLA quality in a compact footprint and is a printer which puts the unmatched capabilities of Stereolithography 3D printing technology, fine-tuned for cost-efficiency and unrivalled material availability, into a smaller footprint. 3D Printed SLA parts with unrivalled accuracy and surface finish. High Flexibility 3D print with fine feature detail in a wide choice of performance engineered materials that match or exceed traditional plastic properties. Easily swap between material modules for flexible use. • Two build platforms • One material delivery cart • Projet TM6000 Print tray • Washing Unit • Curing Unit 3D print with fine feature detail in a wide choice of performance engineered materials that match or exceed traditional plastic properties. Easily swap between material modules for flexible use. Tjdpfx Aietvfwksrsd Print modes: High Definition, Ultra High Definition Resolution: (HD) 0.125mm, 0.125mm layer. (Ultra-high definition): 0.125mm, 0.10mm layer. Net construction volume: (short) 250 mm x 250 mm x 50 mm (medium) 250 mm x 250 mm x 125 mm, (tall) 250 mm x 250 mm x 250 mm. Accuracy: 0.025 – 0.05 mm per 25.4 mm of part dimension. BENEFITS: Stereolithography technology (SLA) Max build envelope capacity (W x D x H): 250 x 250 x 250 mm (10 x 10 x 10 in). Highest precision and accuracy Exchangeable Material Delivery Modules (MDMs). Utilizing two laser spot sizes per layer – no compromise between speed or feature detail. True line drawing in X and Y to accurately define curves. Industry-leading 3D Sprint software for file preparation and production. Cloud connectivity for predictive and prompt service with 3D Connect.

Condition: used, Kyocera TASKalfa 2553ci for Sale Todpfjz Iznaox Airjd Several units are available from stock, all with less than 80,000 prints. Main features: - Colour multifunction printer: print, copy and scan - A3 / A4 - Up to 25 ppm A4 / 12 ppm A3 - Up to 1,200 × 1,200 dpi print resolution - 10.1" colour touchscreen - Automatic duplex printing - Paper weights up to 300 g/m² Kyocera Document Solutions The machines are in good condition, fully tested and cleaned, and delivered ready for use. For any questions or further information, please feel free to contact me.

Condition: new, Year of construction: 2024, functionality: fully functional, TIC PRL6C-177.8-VP-MPC 6-color printing machine, floor model, electro-pneumatically controlled, closed ink system, ink cup ø 90 mm, cliché size WxD: 4 x 100 x 250 mm and 2 x 80 x 200 mm, height-adjustable carree table with 20 stations via spindle, incl. 20 mandrels for printing on beverage cartridges. Connection: compressed air 6 bar, 230 V, 50 Hz. Pad pressure: 350 kg at 6 bar. Tedsr Izdxjpfx Airjd Sturdy cast aluminum housing, electro-pneumatically controlled, clear display with modern microprocessor control, optional signal outputs for connecting peripheral devices. Floor-standing models with sturdy, torsion-resistant base frame made of sheet steel with extended downward adjustment travel of the feed table for positioning higher pressurized goods. European/Japanese pneumatic elements, quiet operation due to air silencer, pad pressure adjustable via display, closed ink system with dowel pins for magnetic attachment, ink cups with ceramic doctor ring, contact pressure adjustable via magnetic adjustment. All machines are equipped with side safety screens, emergency stop button and foot switch. Connections required on site: Compressed air 6 bar, 230V, 50 Hz.