Used Paint Mixer for sale (5,974)

Year of construction: 1998, condition: used, functionality: fully functional, Description: For sale is a large-scale, professional BERKMANN surface spraying and painting system. The system was in productive use until recently and was used for high-quality painting work, including demanding high-gloss finishes. It is currently still fully assembled and installed. This allows interested parties to inspect the existing scope of the system and the installation situation before dismantling and to document it for a later reconstruction. Technical Data and Equipment Fgjdpfsz Ikyrjx Ap Dsh • Large-area filtered supply air ceiling panel approximately 8,100 × 4,500 mm • Filter ceiling divided into two areas across its width • Large-area floor extraction approximately 8,100 × 3,650 mm with grating • Supply air treatment approximately 24,500 m³/h • Exhaust air treatment approximately 24,000 m³/h • Supply and exhaust air fans / air treatment • Existing heating/hot water technology with pumps and fittings • Air ducts and existing piping • Electrical system control / control panel • Cabin lighting • Sale includes the system as it currently exists on site Condition and Use Used, condition appropriate for its age. The system was in regular production use until recently. Previous use included high-quality surface finishing, including high-gloss coatings. An inspection of the still-assembled system is highly recommended. Sales and Dismantling Conditions Sale is effective immediately. The system is permanently installed. Dismantling, removal, loading and transport are the complete responsibility of the buyer and will be carried out at the buyer's expense. The buyer is responsible for organizing the necessary skilled personnel as well as lifting, dismantling and transport equipment. The complete dismantling and removal must be completed by July 31, 2027, at the latest. Note: Technical data has been compiled based on available documents, nameplates and the current condition of the system. Information is provided without guarantee. The condition and scope determined during inspection shall prevail. Selling price: 31,500.00 EUR Price is net, any applicable statutory taxes and duties are excluded. Export, customs clearance and import duties are the responsibility of the buyer.

Condition: used, Year of construction: 2009, functionality: fully functional, input voltage: 400 V, year of last overhaul: 2025, total length: 4,000 mm, total width: 2,000 mm, total height: 2,000 mm, input frequency: 50 Hz, control cabinet length: 400 mm, control cabinet height: 800 mm, Fully operational and currently in production. Machine can be inspected and tested with dough. 6 removable bowls included. The mixer is located in Romania, Arad County, Pâncota, at Nicola SABB Bakery, where it can be seen in operation. More details are available by phone or WhatsApp. Videos of the mixer in operation can also be provided upon request. Main Features • Mixing capacity: up to approx. 300 kg dough / 180–190 kg flour • Type: Double-spiral mixer with 6 removable bowls • Digital control panel with program management • Two mixing speeds: slow and fast • Manufactured in Germany (DIOSNA – Dierks & Söhne GmbH) • Very quiet and stable, equipped with safety cover sensor and automatic stop • Power supply: 400 V / 50 Hz / three-phase Fedjx Ta U Uspfx Ap Dogh • Total power: 49 kW • Year of manufacture: 2009 Technical Condition Fully operational and currently in use for bread and bakery production. Owned and operated by our bakery since new (2009).

Year of construction: 2000, condition: used, functionality: fully functional, We offer these used USF sandblasting and painting booths, model 2 sandblasting booths and 1 painting booth, manufactured in the year 2000. Manufacturer: USF Model: 2 sandblasting booths and 1 painting booth, 12 meters x 5 meters x 5 meters Year of manufacture: 2000 Fjdpfx Ajz I T Nvop Dogh Condition: Used Category ID: 227 Type: 2 sandblasting booths and 1 painting booth, with dimensions of 12 meters long, 5 meters wide, and 5 meters high. The entire unit is in working order and comes with operating accessories. It is available for dismantling on-site (in the Var department, 83) from mid-December. Dismantling and removal are the responsibility of the buyer. If you have any questions or need more information, please feel free to send us a message or call us.

Condition: good (used), Twin Ribbon Mixer Fully Stainless Steel Mixing Chamber Dimensions 1500mm Long x 1100mm Wide x 700mm Deep Fjdpfx Aoqu Uykop Djgh

Condition: used, Year of construction: 2015, functionality: fully functional, input voltage: 400 V, empty load weight: 7,000 kg, input frequency: 50 Hz, overall weight: 7,000 kg, TONELLI M800 – INDUSTRIAL MIXER, 800 L – 2015 Manufacturer: Tonelli Group S.p.A. – Italy Model: M800 Fgodpfxez Ihyve Ap Dsh Capacity: 800 liters Year: 2015 Power: 60 kW Power supply: 380 V Frequency: 50 Hz Weight: approx. 7,000 kg Large-capacity Tonelli industrial mixer, designed for intensive production in bakeries, pastry shops, and the food industry. Suitable for preparing various types of products such as creams, doughs, batters, fillings, and other mixed or aerated preparations, depending on the installed tooling and configuration. Robust industrial construction, designed for intensive professional use. Machine available for inspection.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Extendable spiral mixer Fsdpfxez N Hf Uo Ap Djgh AL 150, electrically lockable, with four bowls Phone number:

Condition: good (used), Year of construction: 1998, functionality: fully functional, Equipment: documentation/manual, Hansa Food-Mix 2000 – Industrial Cream Aerator / Continuous Mixer (similar to Mondomix®) For sale is a powerful Hansa industrial mixer Food-Mix 2000, specifically designed for the continuous processing and aeration of cream and similar products under hygienic conditions. The machine impresses with its robust stainless steel construction, precise process control, and high production capacity – ideal for use in the dairy and food industries. - Manufacturer: Hansa Industrie-Mixer GmbH & Co. KG (Germany) - Model: Food-Mix 2000 (re-infection free) - Year: 1998 - Design: Stainless steel frame and housing - Mobile: Machine mounted on castors - Infinitely variable mixing head drive - Speed range: 80 – 450 rpm Fodpfxsy I A Ere Ap Dsgh - Motor power: 9.2 kW - Foam density: 400 – 900 g/l (cream) - Specific feed density: 1,000 – 1,200 g/l (cream) - Throughput: approx. 300 – 1,500 kg/h (cream) - Dynamic stainless steel mixing head - Mixing head volume: approx. 9 litres - Separate cooling for rotor/stator possible - Can be sterilized with steam

Condition: used, Year of construction: 2007, operating hours: 20,000 h, functionality: fully functional, total height: 1,800 mm, total length: 1,000 mm, total width: 1,200 mm, feed rate X-axis: 12 m/min, feed rate Y-axis: 12 m/min, feed rate Z-axis: 6 m/min, feed length X-axis: 600 mm, feed length Y-axis: 600 mm, feed length Z-axis: 50 mm, We offer this used DIMA (Selective Protective Coating Machine) Hybrid Coating System HC-200, manufactured in 2007. Sale is ex works. Operating hours: 20,000 h, machine is operational. If you have any questions or require further information, please send us a message or call us. On-site inspection is welcome. Technical data: Type: HC-200 Selective protective coating machine Dimensions (L x W x H): 1000 x 1200 x 1800 mm (+500 mm for signal light) Stepper motor in combination with encoder, with ball screw and linear guide and spline axis XY speed 0.2 m/s Z-axis speed 0.1 m/s XYZ resolution 0.00625 mm Resolution of the rotary axis 0.036° Rotation 370 degrees Working area (based on a valve on the Z-slide) 600 x 600 mm – Z-movement 50 mm Fgjdpfx Aoz Ix R Eep Doh Inline chain conveyor 500 x 600 mm – Z-movement 50 mm Inline belt conveyor with clamping 525 x 600 mm – Z-movement 50 mm Min./Max. conveyor width (chain): 35 mm / 500 mm (manually adjustable) 35 mm / 500 mm (automatically adjustable) Min./Max. conveyor width (belt): 35 mm / 500 mm

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 1394002, We are offering this ready-to-use Risco RS 1300 paddle mixer with a tipping mechanism for sale. Model: RS 1300 The paddle mixer is fully functional and can be inspected at any time. Fgjdpfx Ajz Nnmysp Dsh If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Planetary mixer Skako 2250/1500 1,5cbm with: - skip Fsdpoz Nf Uusfx Ap Djgh - cement weight - water dosing - additive dosing

Condition: used, Year of construction: 1999, Equipment: type plate available, We are offering this used Krieger MMU 20 mixer, manufactured in 1999, for sale. Fgedsz E U N Ejpfx Ap Dsh Manufacturer: Krieger Maschinen und Metallbau, CH-4132 Muttenz Model: MMU 20 Factory number: WO 98320 Year of manufacture: 1999 Chamber 1 over-/underpressure: -1/+2.0 bar Chamber 1 maximum operating temperature: 120 °C Chamber 1 volume: 29 L Chamber 2 pressure: 4.0 bar Chamber 2 maximum operating temperature: 140 °C Chamber 2 volume: 7 L If you have any questions or require further information, please feel free to send us a message or call us. The machine is currently in storage and can be connected to power for inspection.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 440079, We offer this ready-to-use GSE Dispensing Colorsat Slim M20-WB paint mixing machine, manufactured in 2008. The unit currently has 12 dispensing stations connected, but it can be expanded to include an additional 8. We will also provide the user manual and operating instructions with the machine. Fgodpez Daukefx Ap Deh The mixing machine features: Sandpiper pump module Network connectivity Pneumatic control Component circulation system Printer Dispensing valves Valve cleaning module Dispensing based on formulations Component dispensing Inventory management system We experienced an issue with the scale, which was resolved after replacing the power supply. During dispensing, the mixing machine occasionally fails to dispense the specified component, but only when dispensing in droplet mode. We can send a video demonstrating the machine's operation upon request. If you have any questions or require further information, please send a message or contact us by phone.

Condition: excellent (used), functionality: fully functional, warranty duration: 12 months, input voltage: 400 V, year of last overhaul: 2026, total length: 1,900 mm, total width: 1,150 mm, total height: 1,270 mm, input frequency: 50 Hz, type of input current: three-phase, - with hydraulic container locking system - including 2 containers - digital control with program memory Fjdpfx Apez Imb Se Djgh - painted finish - 190x115x127 cm (l x w x h) - Container drive motor shaft, right side 20 mm, left side 30 mm - Electrical power 400V | 3Ph | 50Hz - Voltage 22 Kw - 12-month warranty

Condition: excellent (used), Year of construction: 2016, operating hours: 10,000 h, functionality: fully functional, Complete painting system comprising two Cefla Flexispray spraying units and three Cross Oven drying ovens. The system was purchased new in 2016 and is customized for painting softwood interior door frames for the Dutch market. The system includes the following units: Cefla Cross Oven #1 Width 320 cm, length 300 cm Transversal oven able to perform the drying and/or flash-off of water or solvent-based paints applied to mouldings and narrow boards, in a single process. The oven's well-insulated structure, with integrated fans, means low heat loss and impressive energy saving. Cefla Flexispray coating machine #1 Compact linear spray machine, perfect for applying water or solvent-based stains and paints to mouldings, narrow boards or dismantled window sections up to 240 mm wide. It has a roller and belt conveyor system and is equipped with up to 6 spray guns, subdivided into 2 product circuits. Spray guns and pump not included. Cefla Cross Oven #2 Width 320 cm, length 390 cm Transversal oven able to perform the drying and/or flash-off of water or solvent-based paints applied to mouldings and narrow boards, in a single process. The oven's well-insulated structure, with integrated fans, means low heat loss and impressive energy saving. Cefla Flexispray coating machine #2 Compact linear spray machine, perfect for applying water or solvent-based stains and paints to mouldings, narrow boards or dismantled window sections up to 240 mm wide. It has a roller and belt conveyor system and is equipped with up to 6 spray guns, subdivided into 2 product circuits. Spray guns and pump not included. Cefla Cross Oven #3 Width 570 cm, length 700 cm Transversal oven able to perform the drying and/or flash-off of water or solvent-based paints applied to mouldings and narrow boards, in a single process. The oven's well-insulated structure, with integrated fans, means low heat loss and impressive energy saving. The painting system is installed at the factory and is available for a test run. The system is sold "as-is," and its dismantling, relocation, and transport are the buyer's responsibility. Fgedpfx Apez Hbm Te Deh Sales price for the system is 120.000 EUR VAT 0% and is negotiable. If there are several buyers, we reserve rights to sell the system to the highest bidder.

Condition: used, functionality: fully functional, mileage: 4,11,800 km, first registration: 09/2011, Year of construction: 2011, IVECO TRAKKER 450 with CIFA concrete mixer First registered: September 21, 2011 – Euro 5 Mileage: 411,800 km Axles: 4 Equipment: CIFA RY1300 – Power Take-Off (PTO) Tires: 60/70% tread Valid inspection certificate Good condition Fodpfsz Ni Rasx Ap Dogh Available immediately WE CONSIDER TRADES OF VEHICLES OF ALL BRANDS, MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, EQUIPPED WITH CIFA, SERMAC, PUTZMEISTER EQUIPMENT; OR EARTHMOVING MACHINERY FROM CATERPILLAR, FIAT HITACHI, KOMATSU.

Condition: used, functionality: unexamined, 3x KREMLIN Airmix paint spraying/material pumps – 1x Type 17A + 2x Type 20-15 – with accessories Description: For sale is a package consisting of three professional KREMLIN Airmix paint spraying/material pumps from a former paint shop. The units were used for professional painting applications and are mounted on mobile or stationary units with corresponding accessories. Scope of supply: 1x KREMLIN Airmix Type 17A - KREMLIN pneumatic Airmix pump - Type plate: 17A - Translation according to type plate: 10:1 - Serial No.: 72989 - with material container - Pressure regulator - Pressure gauge - Hose set - mobile base 2x KREMLIN Airmix Type 20-15 - Type: 20-15 - one unit with visible serial no. 06E 1581 - each with pressure regulators and pressure gauges - Material container - Material and air hoses - Accessories as shown in the pictures - mounted on mobile units/cabinets The units have not been in operation for a longer period. A current functional test has not been carried out. Due to the prolonged period of inactivity, an inspection, cleaning, and possibly an overhaul of the pumps, seals, and valves should be performed before recommissioning. The units are therefore explicitly offered in their current condition and without testing. Technical documentation is still available for the KREMLIN 20-15; specific spare parts and repair parts such as repair kits and coupling parts are also still offered. Therefore, in addition to recommissioning, the pumps can also be used as a source of spare parts or as a spare parts package for existing KREMLIN Airmix systems. Fgjdpfx Apez Iuiqj Doh Location: 3608 Thun, Switzerland Availability: immediate Inspection: possible by appointment Sale: preferably as a complete package The sale is ex works, in the current condition, without warranty or guarantee. Subject to prior sale. Selling price: 1,450.00 EUR Price net, any applicable statutory taxes and duties are not included. Export, customs clearance and import duties are the responsibility of the buyer.

Condition: used, functionality: fully functional, Year of construction: 2016, IVECO TRAKKER 400 with Liebherr concrete mixer Fgedpfjz Ni Tuox Ap Djh First registration 2016 - Euro 6 30,954 km 4 axles Liebherr HTM 904 equipment - power take-off (PTO) Tires with 50/60% tread remaining Good condition Available immediately (current location: Denmark) WE WILL CONSIDER TRADING IN VEHICLES OF ALL BRANDS, INCLUDING MAN, MERCEDES, DAF, RENAULT, VOLVO, AND SCANIA, EQUIPPED WITH CIFA, SERMAC, OR PUTZMEISTER EQUIPMENT; OR EARTHMOVING MACHINERY FROM CATERPILLAR, FIAT HITACHI, AND KOMATSU.

Condition: excellent (used), All stainless steel Mixer Grinder Size150 mm mince plate "56 head" Hopper capacity 200 litres Single interrupted ribbon mix arm Main motor 15 Kw - 2 speed Mix motor 1.5 Kw Safety interlocked lid Fedpfx Ajwwkk Iop Dogh In good working order

Condition: used, functionality: fully functional, Year of construction: 2005, DAF CF 85 with C&B DUE concrete mixer Registered on 28.06.2005 – Euro 3 Mileage: 505,969 km 4 axles Fgsdjz Nkbajpfx Ap Dsh C&B DUE concrete mixer body Tires: 50/60% tread remaining Valid inspection certificate Good condition Available immediately WE WILL CONSIDER TRADING IN VEHICLES OF ALL BRANDS, INCLUDING MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, EQUIPPED WITH CIFA, SERMAC, OR PUTZMEISTER EQUIPMENT; OR EARTHMOVING MACHINERY FROM CATERPILLAR, FIAT HITACHI, OR KOMATSU.

Condition: used, mileage: 4,44,556 km, Year of construction: 2007, IVECO TRAKKER with CIFA concrete mixer First registered: June 25, 2007 - Euro 5 Mileage: 444,556 km Axles: 4 Equipment: CIFA RY1300 - Power Take-Off (PTO) Tires: 60/70% tread remaining Fsdpfez Ni U Ssx Ap Djgh Valid inspection certificate Good condition Available immediately WE CONSIDER TRADING IN VEHICLES OF ALL BRANDS, INCLUDING MAN, MERCEDES, DAF, RENAULT, VOLVO, AND SCANIA, EQUIPPED WITH CIFA, SERMAC, OR PUTZMEISTER EQUIPMENT; OR EARTHMOVING MACHINERY FROM CATERPILLAR, FIAT HITACHI, AND KOMATSU.

Condition: used, mileage: 2,56,704 km, Year of construction: 2016, IVECO TRAKKER AD340T45 with conveyor and Imer concrete mixer Registered 2016 - Euro 6 256,704 km 13,500 operating hours 4 axles Imer LT8XL-7HSL equipment with telescopic conveyor belt Tires: 50/60% tread Fgedoz Nkdbspfx Ap Djh Good condition Available immediately (current location: Denmark) WE WILL CONSIDER TRADING IN VEHICLES OF ALL BRANDS, INCLUDING MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, EQUIPPED WITH CIFA, SERMAC, OR PUTZMEISTER EQUIPMENT; OR EARTHMOVING MACHINERY FROM CATERPILLAR, FIAT HITACHI, OR KOMATSU.

Condition: used, functionality: fully functional, mileage: 5,42,122 km, Year of construction: 2004, IVECO EUROTRAKKER with Cifa concrete mixer Fedsz Ni Uxjpfx Ap Dogh Registration date: July 23, 2004 - Euro 3 Mileage: 542,122 km Axles: 4 Equipment: CIFA SRY1300 – auxiliary engine Tires: 50/60% tread Good condition Available immediately WE WILL CONSIDER TRADING IN VEHICLES OF ALL BRANDS, INCLUDING MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, EQUIPPED WITH CIFA, SERMAC, OR PUTZMEISTER EQUIPMENT; OR EARTHMOVING MACHINERY FROM CATERPILLAR, FIAT HITACHI, AND KOMATSU.

Condition: new, Year of construction: 2025, Vacuum mixer is designed for mixing crushed meat. Due to the freqency regulator to achieve speed control. The microprocessor control is by German company ADITEC. The working part is with spiral shape and paddles. TECHNICAL DETAILS: MODEL BM 300 Working volume 300 L/ 220 kg Instaled Power 3 kW Shafts speed frequency regulator Kind of shafts paddle Unload front valve Power 380 V 50 Hz Air power 6 bar Fsdswq D Rbepfx Ap Degh L x B x H 1310 x 920 x 1500 mm.

Condition: used, axle configuration: 3 axles, first registration: 06/2009, tire size: 425/65, color: other, Year of construction: 2009, Equipment: ABS, = Additional options and accessories = Fodpfx Apjz Imhrj Djgh - BPW Axles - Drum brakes = Remarks = Superstructure Volume: 12 m3 = More information = Tyre size: 425/65 Make axles: BPW Brakes: disc brakes

Condition: used, functionality: fully functional, input voltage: 400 V, total width: 850 mm, total length: 1,980 mm, total height: 1,325 mm, - Standard internal memory with 37 programs, each with a maximum of 20 stages - Mechanical height adjustment of the bowl - Wide range of bowl height adjustment, allowing the bowl to be removed without removing the tool - Precise recipe preparation thanks to digital time and speed indicators and automatic electronic shut-off - Automatic, computer-controlled start-up program protects the tool and machine - Automatic, slow lowering of the tool while the bowl rises - Excellent safety with two-hand operation - Protective cover made of impact-resistant plexiglass; optionally available in stainless steel or as a safety guard - With protective housing - Easy to move thanks to its low weight and compact dimensions - LED for bowl illumination - Quick-change system for tools Fgjdpfjz Inntex Ap Djh - Easy to clean, particularly quiet - GS safety mark for reliable safety