Used Painter for sale (9)

Condition: like new (used), Year of construction: 2011, operating hours: 2,509 h, functionality: fully functional, machine/vehicle number: 111313, overall weight: 520 kg, load capacity: 15 kg, arm reach: 2,800 mm, pivoting range: 320 °, controller manufacturer: FANUC, controller model: R-30iA, teach pendant manufacturer: FANUC, control cabinet width: 800 mm, control cabinet height: 1,360 mm, input voltage: 400 V, input current: 20 A, type of input current: AC, repeat accuracy: 2 mm, This is a painting robot from Fanuc. It has very special equipment. It was once intended for painting blades for wind turbines. For this purpose, it was installed on a 60 m long rail, which had another rail with which the robot could travel up and down. For this reason, two large additional amplifiers are installed in the control system. This is why the encoder break module is also present twice. Another special feature of this robot is that motors are installed in the shoulder to control two gear pumps. So a 2-component mixture on the robot is no problem. The robot was never actually used. The operating hours only occurred because the robot was live. This was also confirmed to me by the operator of the system (Enercon). The actual servo ON time is 0.2 hours. The robot has slight soiling, but is practically as good as new. Unfortunately, the teach pendant and the teach cable are very dirty. However, this could be replaced if necessary. The cable length between the robot and controller is 5m and can be plugged into the controller. This is also special. We give a 1-year commissioning guarantee. We can help with transportation and installation. It is mounted together with the controller on a special pallet 2500x800x1600mm ready for transportation. We have two of them. The price is for one robot. At the moment it is configured as right-armed and right-handed. However, this can easily be changed without mechanical conversion. Godpfjtu Hpqox Anzsbn The device can be inspected under voltage at Paintrobotics.

Condition: like new (used), Year of construction: 2007, operating hours: 92 h, functionality: fully functional, machine/vehicle number: 82351, overall weight: 520 kg, load capacity: 15 kg, arm reach: 2,800 mm, pivoting range: 320 °, controller manufacturer: FANUC, controller model: RJ3iC, teach pendant manufacturer: FANUC, control cabinet width: 800 mm, control cabinet height: 1,360 mm, input voltage: 400 V, input current: 20 A, type of input current: AC, repeat accuracy: 2 mm, This is a painting robot from Fanuc. It has very special equipment. It was once intended as a replacement robot at BMW for clear-coating luxury cars. It was never used and is therefore as good as new. The robots at BMW worked on a rail. For this reason, a large additional amplifier is installed in the control unit. The corresponding motor is also included. It is practically connected to the robot itself. This means it can be mounted directly on the carriage. Another special feature of this robot is that a motor is built into the shoulder to control a gear pump. This means that dosing on the robot is no problem. The cable length between the robot and controller is 2x10m and can be plugged into the controller. This means 10 m of cable through e.g. a chain from a rail and then another 10 m pluggable to the controller. This is also special. We give a 1-year commissioning guarantee. Gsdetu H Avepfx Anzjbn We can help with transportation and installation. It is mounted together with the controller on a special pallet 2500x800x1600mm ready for transportation. At the moment it is configured as right-armed and right-handed. However, this can easily be changed without mechanical conversion. The device is still with our customer, but can be inspected under voltage at Paintrobotics if there is serious interest. We would bring the device to us from Frankfurt.

Year of construction: 2020, condition: new, Touch control ROMER cabins are equipped with 4 "color touch displays. Operation of the cabin is intuitive, takes place in 3 modes, automatic (time), automatic (based on a clogged filter sensor), or manual Gedpfx Aofz A Ilonzjbn Filter clogging sensor A sensor is installed in the cabins, which queues the filters for cleaning when they become clogged. The system also informs you when the filters have worn out Automatic filter cleaning The electronic system for automatic filter cleaning has a range of cleaning frequency and shot time adjustment. Each of the filters is cleaned separately, the filters can also be cleaned manually using the buttons. We know from experience that it is difficult for the operator to enforce filter cleaning. Thanks to this system, the operator will not have to think about it anymore. Low volume Aluminum fans are very quiet, they work at the level of 74-79dB - It's not much. with the standard cabin structure, it's even hard to talk. Broaching machine through the cabin By dragging the suspension beams within the cabin, the cabin improves work efficiency, thus relieving the painter who no longer has to move them by hand. Explosion-proof design The booths are designed to prevent the formation of an explosive mixture during the painting process. Each of the components has been carefully selected to minimize this risk.

Year of construction: 2020, condition: new, Touch control ROMER cabins are equipped with 4 "color touch displays. Operation of the cabin is intuitive, takes place in 3 modes, automatic (time), automatic (based on a clogged filter sensor), or manual Filter clogging sensor A sensor is installed in the cabins, which queues the filters for cleaning when they become clogged. The system also informs you when the filters have worn out Automatic filter cleaning Gsdpfxsfzktzo Anzjbn The electronic system for automatic filter cleaning has a range of cleaning frequency and shot time adjustment. Each of the filters is cleaned separately, the filters can also be cleaned manually using the buttons. We know from experience that it is difficult for the operator to enforce filter cleaning. Thanks to this system, the operator will not have to think about it anymore. Low volume Aluminum fans are very quiet, they work at the level of 74-79dB - It's not much. with the standard cabin structure, it's even hard to talk. Broaching machine through the cabin By dragging the suspension beams within the cabin, the cabin improves work efficiency, thus relieving the painter who no longer has to move them by hand. Explosion-proof design The booths are designed to prevent the formation of an explosive mixture during the painting process. Each of the components has been carefully selected to minimize this risk.

Year of construction: 2020, condition: new, Touch control ROMER cabins are equipped with 4 "color touch displays. Operation of the cabin is intuitive, takes place in 3 modes, automatic (time), automatic (based on a clogged filter sensor), or manual Filter clogging sensor A sensor is installed in the cabins, which queues the filters for cleaning when they become clogged. The system also informs you when the filters have worn out Automatic filter cleaning The electronic system for automatic filter cleaning has a range of cleaning frequency and shot time adjustment. Each of the filters is cleaned separately, the filters can also be cleaned manually using the buttons. We know from experience that it is difficult for the operator to enforce filter cleaning. Thanks to this system, the operator will not have to think about it anymore. Low volume Aluminum fans are very quiet, they work at the level of 74-79dB - It's not much. with the standard cabin structure, it's even hard to talk. Broaching machine through the cabin By dragging the suspension beams within the cabin, the cabin improves work efficiency, thus relieving the painter who no longer has to move them by hand. Explosion-proof design Gbsdpfx Anjfz I Ehezon The booths are designed to prevent the formation of an explosive mixture during the painting process. Each of the components has been carefully selected to minimize this risk.

Year of construction: 2020, condition: new, Touch control ROMER cabins are equipped with 4 "color touch displays. Operation of the cabin is intuitive, takes place in 3 modes, automatic (time), automatic (based on a clogged filter sensor), or manual Filter clogging sensor A sensor is installed in the cabins, which queues the filters for cleaning when they become clogged. The system also informs you when the filters have worn out Automatic filter cleaning The electronic system for automatic filter cleaning has a range of cleaning frequency and shot time adjustment. Each of the filters is cleaned separately, the filters can also be cleaned manually using the buttons. Gsdpfx Asfz A Iwenzsbn We know from experience that it is difficult for the operator to enforce filter cleaning. Thanks to this system, the operator will not have to think about it anymore. Low volume Aluminum fans are very quiet, they work at the level of 74-79dB - It's not much. with the standard cabin structure, it's even hard to talk. Broaching machine through the cabin By dragging the suspension beams within the cabin, the cabin improves work efficiency, thus relieving the painter who no longer has to move them by hand. Explosion-proof design The booths are designed to prevent the formation of an explosive mixture during the painting process. Each of the components has been carefully selected to minimize this risk.

Year of construction: 2020, condition: new, Touch control ROMER cabins are equipped with 4 "color touch displays. Operation of the cabin is intuitive, takes place in 3 modes, automatic (time), automatic (based on a clogged filter sensor), or manual Gbjdpfx Anjfzciqezsn Filter clogging sensor A sensor is installed in the cabins, which queues the filters for cleaning when they become clogged. The system also informs you when the filters have worn out Automatic filter cleaning The electronic system for automatic filter cleaning has a range of cleaning frequency and shot time adjustment. Each of the filters is cleaned separately, the filters can also be cleaned manually using the buttons. We know from experience that it is difficult for the operator to enforce filter cleaning. Thanks to this system, the operator will not have to think about it anymore. Low volume Aluminum fans are very quiet, they work at the level of 74-79dB - It's not much. with the standard cabin structure, it's even hard to talk. Broaching machine through the cabin By dragging the suspension beams within the cabin, the cabin improves work efficiency, thus relieving the painter who no longer has to move them by hand. Explosion-proof design The booths are designed to prevent the formation of an explosive mixture during the painting process. Each of the components has been carefully selected to minimize this risk.

Condition: new, Year of construction: 2024, functionality: fully functional, Price for the purchase of a powder coating system - Negotiable !!! - Electrical data 100-240V 50-60Hz - Powder absorption up to 200g / min - Air consumption up to 250L / min at 6 bar - Air quality / vapor less than 1.3 g / nm3 - Air quality / oil less than 0.1 mg / nm3 Powder coating gun data - Output voltage 100 kV - max. output current 100 µA - Length of hose 6 m - antistatic hose - Polarization Negative - Conformity ATEX 2mJ Description of hose - Applicator for quick color changes directly from the box - Intuitive 7" touch display - Automatic cleaning function - gun rinsing - Up to 20 user-defined programs - 3 automatic programs - Remote control of the paint quantity and program change from the handpiece -- Equipment - Controller of the PSS series - ProfiJector RI-1 blunt powder injector - ProfiGun powder gun with quick coupling and remote control - One set of hoses - Stand with vibrator and suction unit with fluidization PSS driver - 7-inch touch panel that can be operated with a glove - 3 automatic programs (overpainting, hard-to-reach surfaces, flat surfaces) - Graduation in 0.1kV and 0.1uA steps - Advanced pneumatic valves for air dose control (romer - patent pending) - The actual air flow measurement reacts to errors such as pressure loss or blockage of the system - Advanced diagnostic tools - Ability to name programs - Ability to control external master controllers with ModBus protocol (A-Series) ProfiGun PM-1 gun - A lightweight ergonomic gun, perfectly balanced with a contoured handle - The ceramic cascade with a voltage of up to 100,000V efficiently loads all types of powders - The new generation of nozzles ensures perfect powder penetration into complex shapes - The profiled nut provides a good grip - The conductive handle with high carbon content provides excellent grounding for the painter - The spray gun is made of special materials with increased impact resistance - Fully demountable design with replaceable powder path tube - The spray gun is patented in the USA and the EU - Cascade polarity - negative ProfiJector powder coating pump Description of the pump - Design of a new efficient injector - The most effective feed angle proven by research Gbsdeg U I Ugopfx Anzjn - Saves paint and air compared to right angle injectors - It is characterized by relatively low operating costs compared to other pumps - The injector is covered by a European patent

Condition: good (used), Year of construction: 1988, Reaction vessel, batch system, solids separator, washing trough, painter's wash station, water treatment, tool and water cleaning, filter press, chamber filter press -Manufacturer: Poligrat, chamber filter press type 470-20/2 -Model: 11 plates -Hydraulic cylinder: Stroke: 115 mm -Dimensions: 1315/920/H1720 mm -Weight: 580 kg Godpfx Ashvfznonzebn