Used Panhans 116 for sale (88)

Condition: used, Year of construction: 1980, Spindle swivels: No Height adjustment: Handwheel Nedpozdzb Iofx Am Ujwk Milling vice adjustment: Manual Height indicator: Scale Milling stop indicator: Scale Milling spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 9000, speed indicator defective Motor power: 5 / 6 kW Motor brake: Yes Dust extraction port: 120 mm Machine length: 2500 mm Machine depth: 900 mm Weight: 800 kg

Condition: used, Year of construction: 1987, machine/vehicle number: 1815, functionality: fully functional, power: 5.5 kW (7.48 HP), Mortise and tenon machine with stop, control panel on top, electric feed, year of manufacture 1987, Nwjdjzizipspfx Am Usk 4 speeds: 3000/4500/6000/9000 rpm with reversible motor, star-delta starter, clockwise/counterclockwise rotation, emergency stop switch.

Condition: reconditioned (used), Year of construction: 1997, Connected load 380V 11kW 30A electric swivel -5° to +45 electric height adjustment digital display clockwise/anticlockwise rotation speeds 3000/4500/6000/9000 rpm Nedpfx Amsub S U So Uewk Milling fence with siko counter Spindle diameter 30 mm Table size 1350 x 800 mm Control panel on top Extraction connection 2x120 mm

Condition: ready for operation (used), Year of construction: 1987, machine/vehicle number: 402, functionality: fully functional, cutting height (max.): 70 mm, cutting width (max.): 3,200 mm, saw blade diameter: 300 mm, cutting length (max.): 3,200 mm, cutting height with scoring (max.): 70 mm, Equipment: scorer, Cutting length: 3200 mm Cutting width: 3200 mm Width stop: Gear motor adjustment Main saw unit: saw blade Ø 300, Ø 30, Z=60, SH 70 Scoring unit: yes - saw blade Ø 125, Ø 20, Z=24 Softforming unit: no Side pressure unit: yes - Version: FR 50/100 Residual cutting device: yes - Pressure beam recess Veneer cutting device: yes Trimming device: yes - Spacing: 145/525/1790 Support table front: 400 x 1400 mm - 2 pieces Rear support table: 240 x 2960 mm - 1 piece Support bars rear: 40 x 2960 mm - 5 pieces Angled table: 480 x 1400 mm left Angle ruler: with pull-out Collets: 4 pieces - floating - distance 70/400/1600/2800 Stop jaw: 2 pieces - rigid - distance 1000/2200 additional foot at the rear : no - 3 feet Nodpfovi H Diox Am Uowk safety guard: yes foot switch : no Machine cuts from: left to right unit can emerge in any area: no automatic lowering with saw overtravel: no 3-step cutting height adjustment: no Main circular saw: 7.5 kW, 380 V, 2870 rpm, 50 Hz Scoring saw: 1.1 kW, 380 V, 2800 rpm, 50 Hz Width stop adjustment motor with torque compensation: fine input motor: 0.12 kW, 380 V, 1380 /min, main motor: 0.35 kW, 380 V, 1350n.

Condition: used, Year of construction: 1998, machine/vehicle number: MR007001, Used surface planer with long tables and a planing width of 510mm. Equipped with electric adjustment of the infeed table. Technical specifications: - Maximum planing width: 510 mm - Number of knives: 4 pcs - Cutterhead type: Standard - Cutterhead speed: 5000 rpm Nwsdpfsy Izbfsx Am Usk - Table length: 2850 mm - Infeed table adjustment: Electric - Infeed table length: 1620 mm - Outfeed table length: 1170 mm - Fence tilt: 0-45 ° - Motor power: 5 hp

Condition: good (used), For sale is a used Panhans milling machine Type 245 with 8 milling speeds. The machine has been inspected and refurbished by our qualified staff and is in good condition. Technical data: - Double swiveling unit - Swiveling range -45° to +45° - Electrically height-adjustable and swiveling - Overhead control panel - 8 milling speeds - Direction of rotation switch - Motor power 11 kW / 15 HP - Year of manufacture 2002 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Nodpfoy Nncfsx Am Uowk Related terms: milling machine, router, milling Reference: R-S1632

Condition: repair required (used), Year of construction: 2008, - Used machine - Saw blade tiltable +/- 45.5° - Sliding table: 3200 mm - Cutting width: 1250 mm - Motor power: 5.5 kW / 400 V - Ex site, loaded free of charge Njdpfx Amjy R Ugts Ujwk

Condition: excellent (used), 5.5 kW motor Table length 2 m Table width 52 cm Nsdpfx Aewm Dz Sjm Ujwk 4 blades Working height 19 cm Electrically adjustable top and bottom

Condition: used, from a government agency used in top condition cleaned functionally tested Manufacturer: Panhans Table size mm: 300x280 Travel mm: 700 Stop adjustable/rotatable Workpiece clamp manual Storage location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition, as inspected, Nodpfx Aozd Hdbom Uswk without guarantee or warranty.

Condition: used, Year of construction: 1994, from an authority Centro-Fix cutterhead rubber extension completely adjusted used in top condition cleaned functionally tested partially refurbished Manufacturer: Panhans Type: 445-A Year of manufacture: 1994 Machine no.: 410 GS-tested for wood dust Number of cutters: 4 Feed rate m/min: 7 + 14 Auxiliary stop Table lips with slots Table lips with low noise motorized automatic brake Centrofix reversible cutters Table guide rollers Articulated pressure bar Rubber extension roller Digital display for planing height Electric height adjustment with tip fine adjustment Handwheel fine adjustment Nsdpfxjzd Hcqj Am Uewk Extraction hood integrated Motor kW: approx. 5.5 Planing width approx. mm: 510 Planing height approx. mm: 200 Table length approx. mm: 2250 Extraction port mm: 160 Space requirement approx. L x W x H mm: 2300 x 1050 x 1400 Weight approx. kg: 1000 Total connected load approx. kW: approx. 5.5 Location: 97447 Gerolzhofen, free loading, unpacked Transfer in current condition as inspected, without warranty and guarantee

Condition: used, Year of construction: 1991, machine/vehicle number: 2549, power: 4.7 kW (6.39 HP), input voltage: 380 V, input current: 17 A, input frequency: 50 Hz, spindle diameter: 30 mm, actuation type: manual, PANHANS TYPE 250, Fixed Spindle Milling Machine Used machine Serial No. 2549, Year of manufacture 1991 Item number: JA_G260503 Description Njdpfxsy Uxbvo Am Uowk Spindle diameter: 30 mm Vertical adjustment: 120 mm Quick-change spindle: MK 5 Adjustment: manual Table ring max.: 270 mm Table size: 1100 x 760 mm Table height: 870 mm Frame support: yes Swiveling: ----- Adjustment: ----- Milling stop: manual Power 400V / 50 Hz: 4.7/5.7 kW Speed: 3/4.5/6/9000 rpm Weight approx.: 610 kg Dust extraction: 120 + 120 mm Dimensions LWH: 2300 x 1100 x 1100 mm Condition / Work performed • Machine cleaned • Machine functionality tested • Age-related and usage-related signs of wear • Available from stock Errors and changes to the technical specifications are subject to change. Note on used goods: • Prices are quoted as pick-up prices (unless otherwise stated!) from our location in Ottendorf-Okrilla/Germany - free loading! (unless otherwise specified) • Subject to prior sale! • You will receive an invoice with VAT (MwSt.) shown. • All items are sold as is, without any warranty claims. The buyer is free to inspect the items at our location. • Our general terms and conditions apply. • Special agreements are only possible in writing. • Any items in the background of the image are not included in the scope of supply. • Saw blades are for illustrative purposes only and are not included in the scope of supply. Shipping options: • We will gladly provide you with a transport quote. • Collection from our location in Ottendorf-Okrilla is possible and free of charge by arrangement. (Assembly and demonstration of the goods are optional and can be arranged.) • Optionally, our trained service personnel can assemble the machine at your location and provide you with a brief instruction. Travel, transport and service times are subject to an additional charge.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, power: 7.5 kW (10.20 HP), tool diameter: 125 mm, number of blades: 4, rotational speed (max.): 5,000 rpm, overall weight: 1,100 kg, *Demonstration machine available for immediate delivery* TECHNICAL DATA Planing width 630 mm Planing height 3 – 300 mm Maximum chip removal 8 mm Thickness table length 1100 mm Cutterhead speed 5000 rpm Motor power, feed 0.55 kW / 0.8 hp / 0.75 kW / 1.0 hp Dust extraction port Ø 160 mm, can be used on the left or right Feed rate 7 + 14 m/min Color RAL 7035 light gray and RAL 5000 violet blue Net weight approx. 1050 kg TECHNICAL DESCRIPTION Robust German engineering For thickness planing with a planing width of up to 630 mm and a planing height of 3 to 300 mm, compact and ergonomic machine dimensions Planed in the factory PANHANS solid steel cutterhead Ø 125 mm with 4 Tersa reversible knives Oscillating feed rollers Segmented rubber infeed and outfeed rollers with Ø 90 mm ensure gentle and secure workpiece feed With articulated pressure bar Electric height adjustment of the thickness table, tilt-proof on 4 trapezoidal lead screws With finely planed thickness table Positioning control 4.3" touchscreen Two feed speeds: 7 + 14 m/min Automatic star-delta start Mechanical motor brake Dust extraction port Ø 160 mm, can be used on the left or right Nedpfx Amsfgwqas Uswk CE compliant GS tested

Condition: used, used, in good condition with double-sided handwheel adjustment with digital displays for tool diameter - milling depth - jaw offset Manufacturer: Panhans Type: 204 Nsdpeyt R Nzjfx Am Ujwk Cast iron fence jaws Jaw length right: 450 mm Jaw length left: 450 mm Digital displays for: - Diameter - Cutting depth - Jaw offset Original price approx. 6,000 EUR Extraction connection D 120 mm Weight approx. 66 kg Location: 97447 Gerolzhofen, loaded free on truck, unpacked Offered in as-inspected condition, without warranty or guarantee

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 3 h, For inquiries: Zoltán Utasi +36 30 205 7380 Year of construction: 2021 Condition: as good as new (approx. 3 operating hours) Technical specifications Roller carriage length 3200mm Cutting length 3400mm Cutting height max. 155mm at 90°, 105mm at 46° Cutting width width stop 1250mm Saw blade max. Ø 450mm Table size cast iron table top 1200 x 655mm Additional table extension 750 x 655mm Table extension 1430 x 940mm Table height +/-20?mm 900mm Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Net weight approx. 1150kg Technical description For trimming, cutting to length, formatting, mitre cutting etc. The complete saw shaft unit is dynamically balanced, double-guided swivel segments made of grey cast iron with double column guide for height adjustment and the long circular saw shaft with 2 ball bearings ensure absolutely smooth running. The double roller carriage with ball bearings is smooth-running and maintenance-free. Precise and backlash-free running over the full length, guided by hardened and ground round steel guides with remote locking in a 50 mm grid. Sturdy yet lightweight cross slide made of steel profiles with a support roller on the outer narrow side, cross slide widening on the wide side Length stop on the cross slide with mm scale and telescopic extension extendable up to 3500 mm; with 2 robust and backlash-free sliding stop flaps, 1 end stop with support for long strips; length stop can be used as an angle mitre fence on both sides, infinitely variable from 0° to 46° with mechanical length compensation; all common mitre angles (15°, 22.5°, 30°, 45°) can be quickly set using a fixing system. Electromotive width stop with cutting width 1250 mm to the right of the saw blade, dimension input on the control panel at the top via positioning control to 0.1 mm, stop can be folded down for free table surface; Safety cut-off bar between width stop and roller carriage in case of crushing hazard With pull-out tool drawer Top operation with control panel positioned at eye level, swivelling, incl. Including template holder and with 7" touchscreen control for cutting height, swivelling adjustment and speed Electromotive height and swivelling adjustment via positioning control Swivelling range of the saw blade from 0° - 46° Digital displays for degree setting, cutting height, speed and cutting width APA saw blade quick-clamping system Safety guard can be swivelled to both sides, Nwjdpfsq H Sqdsx Am Uok Protective cover with interchangeable wide/narrow insert Push-button control with electronic soft start (start/stop) Electronic, wear-free motor brake Saw blade Ø 400mm can be lowered under the table Extraction nozzle Ø 120mm on the machine body, Ø 80mm on protective hood CE conformity GS tested Length stop analogue Cross slide standard Cutting length 3400 mm Three-phase motor 5.5 kW Width stop 1250 mm electromotive Scoring unit 1750 0.55 KW (0.75 HP) With manual height and side adjustment via external handwheels externally mounted hand wheels With saw blade quick clamping system APA Quickstep scoring system Tool-free manual adjustment adjustment of the scoring width From 2.8 to 3.8 mm with 0.05 mm grid adjustment per single step, incl. 1 Set of saw blades 125 x 2.8 - 3.8 x 50mm | Z = 12+12 Replacement HM scoring saw blade 125 x 2.8 - 3.8 x 50 mm Z = 12+12 (set = 2 pieces) for QuickStep scoring system

Condition: used, Year of construction: 1975, Panhans sliding table saw IDL000791 - manufacturer: Panhans - model: 685 Nsdpfxjukgyie Am Uswk - year: 1975 - working condition

Condition: new, Year of construction: 2024, Technical data - Planing width: 510 mm - Infeed table length: 1620 mm - Outfeed table length: 1170 mm - Total table length: 2850 mm - Motor power: 5.5 kW / 7.5 HP - Cutterhead speed: 5000 RPM - Dust extraction port: 160 mm - Voltage: 400 V / 50 Hz - Space requirement: 2850 x 1420 mm - Color: Light gray / Violet blue - Weight: approx. 1050 kg Nwsdpjfg Uzbefx Am Usk Description - Solid German engineering - For surfacing and jointing, including concave and convex surfacing adjustment for a PLANING WIDTH of up to 510 mm and a maximum chip removal of up to 8 mm - Ergonomic working position directly at the cutterhead - All-steel spiral cutterhead - Cleaning set for the spiral cutterhead - Finely planed cast iron tables, total table length 2850 mm - Control panel at eye level with digital display of chip removal, current outfeed table position (neutral, concave and convex surfacing), including - Template holder and practical tool storage - Electromotive adjustment of the infeed table via push buttons - Concave and convex surfacing adjustment on the outfeed table - Toothed table lips for noise reduction - Surfacing fence adjustment in depth and angle via 1 lever control, adjustable at an angle up to 45° in an extremely smooth-running steel guide - Surfacing fence ruler, anodized - Swiveling auxiliary fence, type 1545 - Console for feed device - Bridge guard TXF type 1570 with folding cover - Automatic motor brake - Automatic star-delta start, motor protection switch - Planed at the factory

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, cutting height (max.): 155 mm, saw blade diameter: 450 mm, tilt adjustment saw blade: 46 °, rotational speed (max.): 6,000 rpm, section length (max.): 3,450 mm, TECHNICAL DETAILS Maximum cutting height: 155 mm Maximum cutting height at 45°: 105 mm Nsdpsyx Et Hjfx Am Ujwk Maximum cutting width: 1,250 mm Maximum cutting length: 3,450 mm Maximum saw blade diameter: 450 mm Bore diameter: 30 mm Saw blade tilt range: 0 - 46° Speeds: 3,000 / 4,000 / 5,000 / 6,000 rpm Sliding table length: 3,200 mm Scorer: Auto-EPS with motorized positioning for lateral and height adjustment Cross carriage: Standard, with 3 digital flip stops, extendable up to 3,500 mm Rip fence: Motorized control, with positioning control to 0.1 mm MACHINE DETAILS Motor power: 5.5 kW Dimensions & Weight Dimensions (L x W x H): 3,700 x 2,300 x 1,700 mm Machine weight: 1,250 kg EQUIPMENT Electrical axis control Sliding table completely readjusted Ruler carrier replaced with new system, featuring 3 flip stops Stainless steel scale for angle adjustment renewed Cross carriage checked Longitudinal fence with 90° locking completely replaced Machine electrically inspected Machine completely readjusted, checked, and lubricated Note: The specified data are partially taken from manufacturer's brochures or documents and may differ from the actual values.

Condition: used, Four-sided planer PANHANS 180/4, in good condition Nedpfox H Ug Ejx Am Uewk Price changes reserved; errors, printing, and typographical mistakes excepted.

Condition: used, Used bandsaw, price ex works. Nedewx Rp Hjpfx Am Uswk

Condition: good (used), Year of construction: 1984, 2-knife cutterblock; foldable Aigner fence for narrow strips; concave/convex adjustment; planing width 410 mm; planing table length 2770 mm; extraction port Ø 160 mm; motor power 3 kW / 4.1 HP Nwedpfx Asxy Rrnjm Usk

Condition: excellent (used), Length: 260 cm 0.75 kW motor In very good condition. Nwodpfx Aehpuiujm Ujk

Condition: good (used), Year of construction: 1993, functionality: fully functional, operating hours: 7,120 h, cutting height (max.): 100 mm, cutting width (max.): 4,500 mm, saw blade diameter: 400 mm, overall weight: 3,000 kg, cutting length (max.): 4,500 mm, cutting height with scoring (max.): 100 mm, cutting width at rip fence: 3,200 mm, main saw diameter: 400 mm, Equipment: scorer, A well-preserved machine with few working hours. It has been operated by a private customer since new. Nedjvvhfhepfx Am Uewk

Condition: used, Year of construction: 1995, functionality: fully functional, input voltage: 400 V, input current: 125 A, input frequency: 50 Hz, type of input current: AC, pivoting range: 50 °, rotational speed (max.): 9,000 rpm, rotational speed (min.): 3,000 rpm, table width: 760 mm, table length: 1,100 mm, total height: 870 mm, overall weight: 850 kg, Equipment: CE marking, We offer this used Panhans 259 tilting spindle moulder, year of manufacture 1995. Type: 259 Machine No.: 4150 Year: 1995 Rated voltage: 400 V Frequency/Phases: 50 Hz / 3 Current type: AC Full load current: 125 A Internal overcurrent protection: 20 A Table size: 1100 x 760 mm Table height: 870 mm Spindle mount: MK 5 Spindle speeds: 3000/4500/6000/9000 rpm Height adjustment: 120 mm Table opening, rotary disc diameter: 450 mm Swivel range: -5° - +45° Nsdpfoyxqqdox Am Ujwk Weight: approx. 850 kg Fully functional Pickup and disassembly at buyer's own risk/expense Location: A-8265 Kroisbach an der Feistritz If you have any questions or require further information, please send us a message or give us a call.

Condition: repair required (used), Year of construction: 1991, Tilting spindle moulder Manufacturer: Panhans Model: 240 Year of manufacture: 1991 The electronic angle value detection (actual value) is not functional. Table: 135 x 80 cm Power: 11 kW Tilting range: -5° to +45° Angle adjustment: Electric Nsdpfox Tgtwsx Am Uswk Height adjustment: Electric Spindle speeds: 3/4.5/6/9,000 rpm Left/right rotation: Yes Motor brake: Yes Weight: approx. 780 kg Incl. power feed

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, planing width: 630 mm, empty load weight: 700 kg, number of planer blades: 4, planing height: 250 mm, table length: 1,100 mm, TECHNICAL DETAILS Planing width: 630 mm Planing height: 250 mm Number of planer knives: 4 Feed speed: 7 + 14 m/min Table length: 1,110 mm MACHINE DETAILS Motor: 7.5 kW Extraction port: 160 right Nedpfxex Eir Rs Am Uewk Dimensions & Weight Dimensions (L x W x H): 1,070 x 1,200 x 1,060 mm Weight: approx. 700 kg EQUIPMENT Motor brake Electric height adjustment Digital display Tersa quick-change system