Used Swivel Radius for sale (5,314)

Condition: new, Radius tool Predji Hbd Uepfx Abpsa

Condition: used, Year of construction: 2002, Used machine Year of manufacture: 2002 Condition: Well-maintained (from a public facility) Design: Table size: 1255 x 900 mm Pjdpfxozw Rvze Abpsra Table height: 900 mm Table opening: 305/225/160/105/72 mm Weight: 1150 kg Spindle speeds: 3000/4500/6000/9000 RPM with belt-driven quick-change system Indicators: electronic spindle speed display, digital (LED) for spindle height (absolute and relative), as well as for swivel angle; automatic display of the correction value for milling depth; double operating hour counter for total and batch run times Milling spindle: electrically swiveling +/- 45, 50° via button; electrically adjustable height with rapid and slow traverse; with steep taper SK 40; collet chuck, quick-change system incl. torque wrench; wear-free, electrically braked; electropneumatic locking via selector switch Spindle stroke: 150 mm at 5/6 kW and 7.5 kW, 125 mm at 7.5/9.5 kW Milling fence: aluminum milling fence, hard-coat coated with holder for groove plate or guide rails Handwheel adjustment according to mechanical digital counters; separate adjustable run-in basin; workpiece diameter max. 250 mm Extraction: twice 120 mm diameter Maintenance device: central lubrication via pump, lubrication of the milling spindle via grease quantity regulator Accessories: milling arbor 30 mm, wrench, torque wrench for collet chuck system, oil press, grease press, ball bearing for run-in ring 62 mm, groove plate, arc milling guard FRS 95 for milling operations on the run-in ring with extraction nozzle and feed strip Electrical design: lockable main switch, automatic star-delta starter, electrically wear-free brake, connection for extraction control, undervoltage protection; CEE three-phase connection for feed unit (= 5-pole socket) Emission values: noise levels according to prEN ISO 11202; workpiece diameter 125 mm, Z=2, n=6000 RPM Workplace emission: Idle noise (without extraction) 68.6 dB(A) Operating noise (with extraction) 84.6 dB(A) Work at the milling fence - feed side max. 0.34, removal side max. 0.28 With slot hood - feed side max. 0.21, removal side max. 0.20 Minimum air flow rate for both extraction nozzles: 24 m³/min at 1000 Pa Special equipment: Model T26, 5/6 kW (6.8 / 8.2 HP) design with CPS - Type Gamma V protective device; equipment with Centrex type protective device; swiveling control panel with control buttons and digital display for milling spindle swivel and spindle up/down with relative and absolute position display and automatic display of the correction value for the milling depth during swiveling; necessary if a feed unit is installed to the right of the milling fence. Milling fence with resettable mechanical digital counter for total adjustment Integral fence 650 and 500 mm long with filler bar Support for feed unit (can be swiveled away) with motorized height adjustment (for machines with control panel) Milling arbor SK 40, 30 mm diameter, clamping length 140 mm (200 mm tool diameter) Availability: short notice Location: Flörsheim

Condition: used, Year of construction: 1991, Table size: 1100 x 760 mm Table height: 870 mm Tool holder: MK 5 Spindle speeds: 3000/4500/6000/9000 RPM Vertical travel: 120 mm Table opening for through-feed: 450 mm Prjdpsx It Anefx Abpea Swiveling range: -5° to +45° Weight: approx. 850 kg Location: Nattheim

Condition: good (used), Year of construction: 1987, Press brake, bending machine, swing bending machine, die bending machine -Manufacturer: LOTZE Swivel bending machine with segmented upper jaw type 1512000 3.5 Prodpfx Abozwpm Sspja -Drive: mechanical, cam control semi-automatic -Max. working width: 2000 mm -Max. sheet thickness: 3.5 mm -Max. intermediate dimension: 180/280 mm -Accessories: 12 segmented upper cheek splints, 3 upper cheek splints -Connected power: kW -Dimensions: 3350/1250/H1600 mm -Weight: 2555 kg

Condition: new, Panel swivel cart Podpfxjw I U A Ij Abpora new suitable for Fimal Concept 350 pressure beam panel saw complete including 4 swivel castors (2 lockable) 12 all-direction rollers and a foldable support table Availability: short-term Location: Hochheim

Condition: used, Year of construction: 1991, Eye-level control panel, Aigner integral stop including feed with sliding carriage (without stop ruler), milling stop with digital display and swivel mechanism Storage location: Nattheim Pedoyi A Tdepfx Abpera

Condition: used, Year of construction: 1983, Max. bend length: 1640 mm Max. sheet thickness: 3 mm steel Manual and automatic bending process possible Bending angle adjustable via potentiometer Pedozvw Rpopfx Abpsra Hub height of the upper gantry and material thickness adjustable via switch Manual backgauge with spring fingers Weight: approx. 1600 kg

Condition: used, Year of construction: 2021, controller model: , _____ Description: Year of manuf. : 2021 TruBend Center 5030 :- Robust machine frame : - Angular direct drive :- Crowning system :- Machine control with touchscreen operation :- TecZone Fold programming – floating licence :- 2-axis part manipulator with suction modules :- 5-axis backgauge :- Optical angle assistant :- ToolMaster :- Hold-down tools :- OBW90 and UBW90 bending tools Technical specifications Minimum bending depth (standard tool):145 mm Minimum bending depth (with additional hold-down tool):40 mm Maximum bending length:3,123 mm Minimum bending length:80 mm Hold-down force:101 t Maximum box height:220 mm Minimum material thickness:0.4 mm Maximum steel material thickness:3 mm Maximum stainless steel material thickness:2.2 mm Maximum aluminium material thickness:4 mm Rapid traverse Y-axis (press beam):250 mm/s 5-axis backgauge:1,700 mm/s Prsdpfxezt Ez Rj Abpea ToolMaster Bend:2,400 mm/s Dimensions and weight:6,500 x 3,150 x 2,995 mm / 26,000 kg Features :- ACB Laser :- DMC Bluetooth 2D barcode scanner :- Set of 3-surface suction modules (12 pieces) :- Support brackets (2 pieces) :- Additional hold-down tool function (ENW) :- Additional bending tool function (ZBW) :- ENW110-50 – Length 3,123 mm :- ZBW400 – Length 940 mm

Condition: used, Second-hand swivel cutter head from WSW for use in professional woodworking. The tool is suitable for working with wood using appropriate machinery. The steel body is designed for blades with WP inserts. Technical data: - Blade: WP - Flight circle (ø): 150 mm - Bore: 40 mm - Marking: MAN Prodpfsztylqjx Abpja - Length: 50 mm - Material: Steel

Condition: used, Three second-hand swivelling clamping shoes from Schafberger + Sprödhuber (S+S) for frame presses used in professional woodworking. They are used to align and securely clamp workpieces when assembling frames and structures. Technical data: Pedpoztniwefx Abpjra - Dovetail width: ~ 58 mm

Condition: like new (used), functionality: fully functional, Year of construction: 2007, FASTI TYPE 209 - 1600mm / Swivel bending machine incl. segment rail Pjdszwqtgepfx Abpjra -CE marking -Working width 1620mm -Max. sheet thickness steel 3.0mm -Max. sheet thickness stainless steel 2.0mm -Max. sheet thickness aluminum 4.0mm -Upper die stroke / Manual / Handwheel -Bending die / Manual -Clamping / Mechanical -Manual bending / Angle adjustment -Additional SEGMENT BENDING RAIL -Various accessories (see pictures) -Application / Precision bending of steel / stainless steel / aluminum -Manual back gauge -Documentation Dimensions: L x W x H 2.9 x 1.6 x 1.7 meters / Weight 1800 kg Errors and omissions excepted

Condition: used, Year of construction: 1994, Motor 6 / 7.5 kW with 4-roller feed, fixed speeds. Speed extensions. Height of worktable: 920 mm. Spindle tilting: -10° + 45°. Max. spindle projection above table: 175 mm. Spindle speeds: 3250/6500-5000/10000 rpm. Max. tool diameter: 250 mm. Weight: approx. 950 kg. Location: Nattheim. Pedpfx Absw Enw Iepsra

Condition: like new (used), Year of construction: 2025, COLUMBUS MOVE – The space-saving professional vacuum press for maximum flexibility Full performance. Minimal space requirements. The COLUMBUS MOVE was specifically developed for operations wishing to work professionally with vacuum technology—even with limited space available. Thanks to its mobile and compact design, the press can be easily stored after use, freeing up valuable workshop space. Ideal for: * Veneering * Laminating/form gluing Prodpfx Abozqtngspja * Coating * Curved workpieces * Flexible custom production Your benefits: * Space-saving MOVE system * Mobile and flexible use * Heavy-duty industrial construction * Lifetime guarantee on the machine structure * Premium BECKER vacuum pump * Quick-change membrane system * Connection for external vacuum bag * Simple operation and high operational safety COLUMBUS 360° included: With a practical manual, Master Manual, and AI support, you benefit not only from state-of-the-art technology but also from decades of application expertise. Technical specifications: * Usable area: 3050 x 1350 mm * Maximum payload: 1.0 t * Maximum workpiece height: 600 mm * Vacuum pump: BECKER 40 m³ * Weight: 670 kg Particularly attractive for companies seeking flexible production while making efficient use of valuable workshop space. COLUMBUS has been developing professional vacuum technology for woodworking operations for nearly 50 years. Viewing and personal consultation gladly by appointment.

Condition: new, Type: CR0900S-88 Podpfx Abev Tbx Ajpora Serial number: CR416156 Gear ratio: 312:1 Speed: 9.6/min Torque: 13000 mm Year of production: 2022 Weight: 806 kg Country of production: Germany

Condition: good (used), Load capacity: 200 kg Tipping height: 2200 mm Prsdpoum Slvjfx Abpja Container size: 800x600x550mm

Year of construction: 2022, condition: used, The plate swivel fixture simplifies handling when it comes to moving plates from a vertical to a horizontal position. The receiving frame is hydraulically adjustable in height and can also be swiveled. Support rollers facilitate movement in the horizontal position. Four swivel casters guarantee safe internal transport. Technical data: Support height: Prodpfx Abov T Ilvepoa • vertical: approx. 340-120 mm • horizontal: approx. 1200-890 mm Max. plate size: 5200 x 2100 mm Load capacity: 250 kg Location: Bad Wimpfen

Condition: new, mileage: 20 km, first registration: 02/2023, fuel type: electric, fuel: electricity, color: silver, gearing type: automatic, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, full service history, navigation system, power assisted steering, power mirror, traction control, = Additional Options and Equipment = - Heated exterior mirrors - Hands-free system - Front electric windows - Driver airbag - Remote central locking - Height-adjustable driver's seat - Height-adjustable steering wheel Predpfx Ajuxbhljbpja - Air conditioning - Fog lights - Parking sensors - Radio/DAB/Bluetooth = Further Information = General Information Number of doors: 4 Cab type: single Interior Interior: black Environment Emission class: Euro 0 Documentation Service booklets: Available (dealer maintenance) Condition General condition: very good Technical condition: very good Visual condition: very good Damages: none Number of keys: 2 Warranty Warranty: None

Condition: good (used), DECKEL universal table - small - , used Clamping surface 800 x 240 mm Predpfxjzucr Nj Abpsa Weight estimated approx. 0.1 t

Condition: excellent (used), Year of construction: 1993, Manufacturer: SCM Podpoyx Nadefx Abpsra Model: T150 Class Year of manufacture: 1993 Motor upgraded: 5.5 kW Tilting range: -10° to +45° Electromagnetic brake Motor with 2 speeds / pole-changeable Speed settings: 3000/4500/6000/7000/10,000 rpm Forward/reverse rotation Table size: 2700 x 700 mm Spindle diameter: 30 mm Table extension: 2 x 650 mm Extendable frame support Aluminum fence jaws Milling fence with fine adjustment - Electric height adjustment - Electric tilt adjustment Feeder: Wegoma VS 44 - 4 rollers Extraction connection: 120 x 120 mm Space requirement: approx. 2700 x 1300 x 1600 mm Weight: approx. 1000 kg Location: 54634 Bitburg, loaded free on truck, unpacked Delivery as-is, as inspected and function tested without refurbishment, without warranty or guarantee

Condition: used, Univ. Schwenk-Tilting-Rotary Table DECKEL Universal tool and milling machine mounting table, suitable for FP 2L, FP 3L or FP 4L No. 2314 Year of manufacture: approx. 1975 Clamping surface: 1000 x 520 mm - 6 clamping slots, 16 mm, spacing 90 mm - Clamping plate can be rotated horizontally to the right and left up to 45 degrees, with a scale - Can be tilted +/- 15 degrees from/towards the machine - Can be swiveled +/- 15 degrees Psdpod E A I Nefx Abpera - Swiveling table, tilting table, angular table Permissible load max. 1000 kg Weight: 400 kg Good condition

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Everything functions perfectly. All bearings and guides are in good condition; the machine runs very smoothly. Year of manufacture: 1990 with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. The height adjustment is also electric, and a handwheel is also available for fine adjustment. Pjdpszt Ai Ejfx Abpora with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation

Condition: new, Year of construction: 2026, Tilting Swivel Machine Vice 125 mm QHK125 – Precise Angular Workpiece Clamping Machine vices are a key component of any machining workstation where workpiece stability and accurate positioning are essential. The QHK125 model features a unique tilting and swivelling cradle design, making it highly functional for angled machining operations. Ideal as a vice for bench drills, milling machines, and grinders, especially for applications requiring unusual workpiece positioning. Its robust cast iron construction combined with swivel and tilt capabilities ensures flexibility, precision, and safe operation. Main advantages of the QHK125 machine vice Tilting and swivelling cradle design – allows simultaneous angular positioning in two planes. Precision 360° graduated scale – enables accurate workpiece positioning in 1° increments. Solid cast iron construction – provides stability, rigidity, and long service life. High clamping force of 3000 kg – ensures secure holding of workpieces during heavy-duty and precision machining. Protected lead screw – shields the mechanism from chips and coolant, extending service life. Removable swivel base – allows the vice configuration to be adapted to specific machining requirements. Design and technology The QHK125 is an industrial-grade swivel machine vice designed for precise and safe angled machining operations. The body and movable jaw are manufactured from high-quality cast iron, providing excellent resistance to twisting forces and vibrations. The tilting mechanism, based on a cradle construction, ensures stable maintenance of the selected angle. The lead screw is protected by a cover, preventing contamination and wear, which helps maintain smooth operation over a long service period. Precision and work efficiency Prsdpfx Abovxgh Tepoa The tilting cradle vice allows the workpiece to be rotated and inclined in multiple planes without removing it or changing the vice position on the machine table. This design significantly reduces setup time and enables complex machining operations without the need for additional fixtures. The rigid and stable construction ensures high accuracy even during demanding milling and grinding operations. Applications The QHK125 vice is suitable wherever precise angular positioning of the workpiece is required. It is recommended for: Conventional and CNC milling machines – for angular and face machining operations. Grinding machines – allowing accurate positioning of surfaces at the required angle. Bench drills – ideal for drilling inclined holes. Toolrooms and single-piece production environments – offering high versatility for precision tasks. Standard equipment Tilting cradle machine vice with body and movable jaw Swivel base with 360° graduated scale Tilting cradle mechanism Covered lead screw Technical specifications – Tilting Swivel Machine Vice 125 mm Parameter Value Jaw width (S) 125 mm Maximum jaw opening (am) 125 mm Jaw height (h) 50 mm Base width (A) 244 mm Mounting hole diameter (D) 18 mm Total height (H) 195 mm Total length (L) 420 mm Clamping force 3000 kg Weight 33 kg

Condition: new, Year of construction: 2026, Rotary machine vice QH200 200 mm – precise clamping for professional applications Machine vices are essential equipment for any machining workstation where accuracy, stability, and durability are required. The QH200 rotary machine vice, with a 200 mm jaw width, is a robust and versatile solution designed for use with milling machines, drill presses, grinders, and shaping machines. Thanks to its 360° swivel base with 1° graduation, the operator has full control over workpiece positioning relative to the cutting tool, significantly improving machining precision and working comfort. Main advantages of the QH200 machine vice Rigid cast iron construction – provides excellent resistance to deformation and effectively dampens vibrations. 360° swivel base – with 1° graduation, enabling fast and precise angle adjustment. High clamping force of 3500 kg – ensures secure workpiece holding even during heavy-duty machining. Protected lead screw mechanism – shielded against chips and contaminants, increasing durability and reliability. Removable swivel base – allows use as either a fixed or rotary machine vice. Construction and technology The QH200 machine vice is manufactured from high-quality cast iron components. The body and movable jaw design provide excellent rigidity and resistance to overloads. The lead screw mechanism is enclosed and protected against metal chips and coolant, ensuring long-term protection of precision working surfaces. Carefully developed geometry and accurately machined contact surfaces guarantee reliable and precise clamping in accordance with industrial requirements. Precision and work efficiency The precise rotary mechanism allows quick adjustment of the clamping angle without repositioning the entire machine. This feature significantly reduces setup time and improves efficiency during both single-piece and serial production. The high clamping force enables safe machining of even hard materials without the risk of workpiece movement. Applications The QH200 rotary machine vice is designed for professional use in: industrial machining plants, tool rooms, metalworking workshops. It is ideal as: Drill press vice – for accurate and repetitive drilling operations. Milling machine vice – for stable clamping during side and face milling. Grinding machine vice – for machining flat and angled surfaces. Universal workshop vice – for production and maintenance applications. Standard equipment Vice body and movable jaw made of high-quality cast iron Angular scale from 0–360° with 1° increments Removable swivel base Protected lead screw mechanism Optional equipment Soft and hard jaw inserts for non-standard workpieces Mounting elements adapted to specific machine types Technical specifications – QH200 machine vice Parameter Value Jaw width (S) 200 mm Maximum opening (am) 160 mm Jaw height (h) 63 mm Body height (H1) 140 mm Total height (H) 178 mm Base width (A) 240 mm Overall length (L) 480 mm Length without base (L1) 445 mm Mounting hole diameter (D) 18 mm Clamping force 3500 kg Prsdpfx Abjvxgi Djpoa Weight 41 kg

Condition: new, Year of construction: 2026, Tilting and Swiveling Machine Vice 160 mm QHK160 – Precise Positioning and High Clamping Force The QHK series machine vices are specialized solutions designed for demanding machining operations where both strong workpiece clamping and precise angular positioning are essential. The QHK160 model, featuring 160 mm wide jaws, is a tilting and swiveling machine vice ideal for use with bench drills, milling machines, grinders, and planers. Its design allows the workpiece to be rotated and tilted, making it a versatile tool for production workshops, tool rooms, and maintenance departments. Main advantages of the machine Adjustable tilting angle – enables precise workpiece positioning in multiple planes without the need to reposition the machine tool. 360° swivel base – equipped with a 1° graduation scale for accurate alignment with the cutting tool. High clamping force of 3000 kg – ensures stability and safety even during intensive machining operations. Robust cast iron construction – resistant to vibrations and deformation during heavy-duty work. Protected lead screw – prevents contamination from chips and debris, increasing the durability and reliability of the clamping mechanism. Construction and technology The QHK160 machine vice is manufactured from high-quality cast iron, providing excellent rigidity and structural stability. The integrated body and movable jaw minimize deflection, ensuring repeatable workpiece positioning. The swivel base with a precision scale and the tilting cradle mechanism allow simultaneous angular adjustment in two axes – horizontal and vertical. Thanks to this design, the QHK160 is an excellent solution for applications requiring multi-stage machining and changing tool approach angles. Precision and work efficiency The tilting and swiveling functions allow accurate workpiece positioning without the need for repeated clamping. This significantly reduces setup time and increases workstation efficiency. Combined with a high clamping force of 3000 kg, the QHK160 provides secure and stable holding of the workpiece regardless of its shape and machining requirements. Applications The QHK160 machine vice is an excellent choice for professional industrial users who require flexible and durable workpiece clamping. It is ideal as: Bench drill vice – enables precise drilling of angled holes. Milling machine vice – provides stability during complex machining operations. Grinding machine vice – suitable for grinding inclined, curved, and angular surfaces. Universal workshop tool – for tool rooms, maintenance departments, and production workshops. Standard equipment Cast iron machine vice with tilting and swiveling base 360° swivel scale with 1° graduation Lead screw protection against contamination and chips Technical specifications – QHK160 Machine Vice Parameter Value Jaw width 160 mm Maximum clamping force 3000 kg Swivel range 360° Swivel scale graduation 1° Construction material High-quality cast iron Type Tilting and swiveling machine vice Pjdpfovxgkzex Abpora

Condition: good (used), Year of construction: 1977, HERA UM2 folding machine Brand: HERA Year of manufacture: 1977 Pjdpfxjzupxcj Abpjra Type: UM 2 Control type: Conventional Sheet thickness (mm): 2 mm Working width (mm): 3000 mm Machine weight (kg): 3000 kg Length (mm): 3820 mm Width (mm): 800 mm Height (mm): 1850 mm