Used Paper Punching Machine for sale (65,164)

Year of construction: 1993, condition: ready for operation (used), A Trumpf punching machine still in operation, including a Trumalift loading and unloading unit that has not been used for a longer period, is available. 1) CNC punching machine Trumpf TruMatic 500, year of manufacture: 1993, max. punching force: 220kN, max. sheet thickness: 6.4mm, max. workpiece weight: 150kg, max. punching diameter: 76.2mm, simultaneous motion: 108m/min, stroke rate: 900/min, machine dimensions X/Y/Z: approx. 6700mm/5800mm/2200mm, weight: approx. 11000kg. 2) Trumpf Trumalift SheetMaster 1250 loading and unloading system, year of manufacture: 1993, max. sheet dimensions X/Y: 2500mm/1250mm, max. sheet thickness: approx. 8mm. Documentation available. An on-site inspection is possible. Hedpfsyz Ap Rox Acbofg

Condition: ready for operation (used), Offered is a hydraulic punching machine: Punching force: 100tons (Tm), max. punching cross-section: 2350mm², punching capacity (standard): Ø50mm at 15mm material thickness, punching depth: 500-800mm, incl. special accessories: round punch: max. Ø80mm at 9mm, max. Ø100mm at 7.5mm, square punch: 50mm at 12mm, 60mm at 9.5mm, 70mm at 8mm, rectangular punch: max. 90 x 25mm at 10mm. Inspection possible by appointment. Hfodjyzr Hlopfx Acbjg

Condition: excellent (used), Year of construction: 1993, Müller Weingarten blanking line Pressing force 5,000 kN Stroke rate 15-60. rpm Stroke 255 mm Stroke adjustment 140 mm Installation height 930 mm Hedpoyz Sg Ssfx Acbofg Table surface 4,000 x 2,500 mm Plunger area 4,000 x 2,500 mm Belt conveyor Belt width 500-2000 mm Belt thickness 0.5-2.0 mm Reel load capacity 30,000 kg

Condition: used, pressure: 70throat depth: 750messurements (LxWxH): ca. 900 x 2300 x 1900 Hole punch GEKA Puma 70/E-750 The positioning table is unfortunately defective; otherwise, the machine is in good used condition. Specifications: Punching force            70 t Punching capacity      27 in 20 mm Punches max. Drm.    70 in 8.0 mm or Drm.                        100 in 5.0 mm or Rectangular             50 in 8.0 mm or Rectangular             60 in 7.0 mm or Rectangular             70 in 6.0 mm Hedpfx Ajwrkcyscbefg Projection                     750 with -Foot switch

Condition: excellent (used), Year of construction: 2018, operating hours: 10 h, functionality: fully functional, Automatic toilet paper and kitchen towel packing machine Hfsdouyhf Hopfx Acbog We have used it for less than 10 hours. After purchase, it did only a couple of test runs and then was stored in a dry warehouse for later use. It had never been used since. There might be some bends on the machine since it has been moved a couple of times. Specification Power 220V 50Hz Packing: Toilet paper 2/4/6/8/10 rolls per pack with handle, Hand towel 2/4 rolls per pack with handle Packing in film, overwrapping with meld line on the back. It uses opp film, a max roll diameter of 30cm, and a thickness of 0.03 - 0.10 by the specification, no idea about other materials - have not tested any. For setting up and configuration the machine you will have to contact the manufacturer The machine can be seen, powered on, and set to automatic/manual running. User manual is available, have videos from the manufacturer only

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 12-25, A fully automatic cutting machine for Tissue paper rolls. High precision servo control system - "Control Techniques" Cutting large rolls Diam. up to 280mm - in single channel. Cutting rolls in two channels - up to max. Dia. of 140mm Automatic lubricant spraying system and air cooling for the blade. The machine complies with CE Safety standards. Specifications: - Product cutting dia.(Max)– 280 mm - Cutting speed Max – 160 cuts/min (x 2 lines = 320 Toilet rolls/min) - Computerized controlled functions: * Product and trim length * Cutting speed * Sharpening frequency and advance * Blade lubrication frequency * Fault display * Counter (coded) * Inlet conveyor and hoper transferring logs automatically from the ewinder into the cutting channel. * Choice of program according to the various products. - Clamps – machine is supplied together with 4 rigid pneumatically operated clamps, according to customers products dia. - Blade dia. – 600 - 800 mm - Electric supply – 12 kw x 380 v - Air pressure – 1/4 hose 6 atm - Dimensions – 6.5 x 2,2 x 2.4 m Hfjdpfxeup U Raj Acbeg - Weight – 3500 kg

Condition: excellent (used), Year of construction: 2001, Kaiser Punching Press Model: KSTU 4000-25-6P Press force: 4,000 kN Table size: 2,500 x 1,250 mm Ram surface: 2,500 x 1,100 mm Shut height: 700 mm Ram stroke: 40-250 mm Ram adjustment: 200 mm Strokes per minute: 20-100 1/min Control: Siemens S7 Hfjdpfx Aceyx Eu Rsbjg Required space: 4.8 x 3.2 x 4.8 m (LxWxH) Weight: 78,000 kg PBK Straightening Machine Strip width: 120 - 800 mm Strip thickness: up to 6.0 mm ARKU Decoiler Load capacity: 8,000 kg

Condition: new, Year of construction: 2025, total height: 3,700 mm, ram adjustment: 150 mm, installation height: 650 mm, table height: 854 mm, total width: 2,479 mm, total length: 4,186 mm, table length: 2,000 mm, table width: 1,200 mm, conveyor belt width: 350 mm, pressing force: 250 t, stroke length: 250 mm, distance between side stands: 920 mm, distance between stands: 2,040 mm, overall weight: 31,000 kg, control voltage: 24 V, Standardized 250-ton automatic punching press with fixed stroke at an attractive price. Cost-optimized basic configuration without enclosures or safety gates for use in a soundproof booth. Optional accessories such as safety gates/enclosures, press force measurement, tool change/clamping system, etc. are available. For technical specifications and available accessories, see PDF documents. Delivery time: 6 months Hodowb Dh Ispfx Acbsfg

Condition: new, Year of construction: 2025, total height: 5,150 mm, ram adjustment: 200 mm, installation height: 750 mm, table height: 1,117 mm, total width: 2,600 mm, total length: 4,000 mm, table length: 2,500 mm, table width: 1,300 mm, conveyor belt width: 430 mm, pressing force: 315 t, stroke length: 300 mm, distance between side stands: 850 mm, distance between stands: 2,580 mm, overall weight: 54,000 kg, control voltage: 24 V, Standardized 315-ton automatic punching press with fixed stroke at an attractive price. Cost-optimized basic configuration without enclosures or safety gates for use in a soundproof booth. Optional accessories such as safety gates/enclosures, press force measurement, tool change/clamping system, etc. are available. For technical specifications, see PDF document. Hfedpfx Acswc A Ebobjg Delivery time: 6 months

Condition: excellent (used), EBA 551-06 Guillotine – Precision Cutting Machine with Safety Features The EBA 551-06 is a high-quality electrically-operated guillotine, engineered for precise and efficient cutting operations in print shops, copy centers, and in-house production settings. Renowned for German engineering and robust durability, this model offers a combination of accuracy, safety, and user-friendly operation. Featuring a 550 mm cutting width and a powerful blade unit, the EBA 551-06 delivers clean, precise cuts even when processing demanding paper stacks, making it the perfect choice for professional finishing tasks. Key Features: - Cutting width: 550 mm - Electric blade drive for effortless, consistent cutting - Spindle-guided backgauge with precision measurement scale - Optical cutting line indicator for accurate alignment - Two-hand safety operation system - Sturdy all-metal construction for long-term durability - Manual clamping system with strong, uniform pressure - High-quality, hardened steel blade Applications: - Digital and offset print finishing - Brochures and booklets Hfodpfx Acsy Dfb Ujbog - Business cards - Flyers and marketing materials - General paper cutting operations The EBA 551-06 is the ideal solution for businesses seeking a rugged, safe, and precise cutting machine that delivers professional-level results. Condition: [Used / Very Good / Excellent – specify] Availability: Immediate Location: [Your location] Contact us for further information, additional photos, or a video demonstration of the machine in operation.

Condition: excellent (used), Year of construction: 2025, operating hours: 1,260 h, functionality: fully functional, machine/vehicle number: 548, inner diameter: 38 mm, cutting length (max.): 4,000 mm, The core winding machine is designed for the production of 25-layer paper tubes with an internal diameter ranging from Ø 38 to Ø 250 millimeters. 3-year warranty. Hjdjyvgcvepfx Acbefg

Condition: good (used), Year of construction: 2002, machine/vehicle number: 7231424, cutting width (max.): 1,150 mm, insertion depth: 1,150 mm, table height: 800 mm, stack height: 165 mm, Equipment: documentation/manual, safety light barrier, Color display Computer for 99 programs Chrome-plated central table with air jets Enlarged side tables with air jets Infrared safety barrier Technical specifications: Cutting width: 1150 mm Cutting height: 165 mm Total cuts: 2,061,885 Hfedpfx Aceyzz Dtsbsg Includes documentation and accessories

Condition: used, Year of construction: 2014, operating hours: 10,100 h, functionality: fully functional, machine/vehicle number: 12410, total height: 2,900 mm, ram adjustment: 40 mm, total width: 1,550 mm, total length: 2,000 mm, table length: 580 mm, table width: 460 mm, pressing force: 25 t, control cabinet height: 1,800 mm, control cabinet length: 600 mm, control cabinet width: 600 mm, overall weight: 4,700 kg, DGUV certified until: 01/2027, We offer a used punching machine of the type Mabu VS251/RC11 from the year 2014. The machine is in good used condition and ready for immediate use. Manufacturer: Mabu Model: VS251/RC11 Year of manufacture: 2014 Condition: used Machine type: Punching machine Additionally, the machine is equipped with a high-quality roller feeder from Zehnder & Sommer (model EV12-22TK, year 2019), ensuring precise and reliable material feeding. If you have any questions or require further information, we are always happy to assist you. Please feel free to contact us by message or by phone. All information without guarantee. Subject to errors, changes, and prior sale. Hfjdpfx Aceyzl Txjbog

Condition: used, Single-Column Eccentric Press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture: 1962 Pressing force: 63 tons Throat depth: 260 mm Table size: 630 x 530 mm Table opening: Ø 210 mm Ram area: 315 x 260 mm Adjustable ram stroke: 8–100 mm Ram adjustment: 63 mm Hjdpfxsk S Htxo Acbofg Ram shank bore: Ø 40 mm, with clamping piece Installation height: max. 450 mm Strokes per minute: 115 spm Air requirement: min. 4.5 bar Motor power: 4 kW Electrical connection: 380 Volt, 50 Hz Table height above floor: approx. 750 to 900 mm - Electric stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination via WEINGARTEN friction-threaded clutch with TDC safety - Front crankshaft support bearing - Press table height adjustable via 2 threaded spindles - Manual central lubrication system - Free-standing electrical cabinet - UVV (accident prevention regulations) for manual loading operations Space requirements (L x W x H): 1750 x 1600 x 2430 mm Weight: 4.5 tons In good condition

Condition: used, functionality: fully functional, With this offer, you are purchasing a used Canon Booklet Trimmer F1. Item for sale: 1 x Canon Booklet Trimmer F1: Suitable for various Canon models. We also have other finishing options and printing machines in stock. Please feel free to contact us! Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Hfodpfx Acsytciasbog Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally.

Condition: ready for operation (used), Year of construction: 1982, operating hours: 40,000 h, functionality: fully functional, machine/vehicle number: 1986, cutting width (max.): 1,900 mm, cutting length (max.): 1,900 mm, stack height: 1,900 mm, type of input current: AC, front table length: 14,000 mm, total width: 5,500 mm, total height: 3,200 mm, input voltage: 380 V, compressed air connection: 6 bar, Maker: Valmet-Strecker Year: 1982 Max knife load 600gsm ( Min 40 gsm ) Max working width 1900 mm Min sheet size (w x i) 320 x 420mm Max sheet size (w x l) 1900x1900mm Unwind stands one, double type Max unwind reel diam. 1500 mm Core size 3”, 6”, 10” and 12” Max pallet hight 1900mm Max speed 200m/min Spare parts and tools Machine overall dimensions: length 14 m, width 45.5 m in delivery exit working condition Machine modifided many time last years Hsdpfxswpp Szo Acbsfg

Condition: used, Year of construction: 1993, POLAR 115 EM-MON AUTOTRIM • Airtable • Side tables (air) • Light barrier • Programmable Hfodpfx Aeytb A Sscbjg • Jogger – RAB2 • Lift – L600-3 • Three extra spare knives • In production • Available: 05/2026

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, Options: ACB, BendGuard for manual bending, HQ version, interface to 2nd machine Hjdpfjwykccex Acbofg

Condition: used, Year of construction: 2015, Working hours machine: 31888 (17.01.2024) h Working hours laser on: 19090 (17.01.2024) h Working hours beam on: 6475 (17.01.2024) h Laser power: 4000 Watt Max. punching force: 300 kN Control: AMNC 3i Working range laser: 2500 x 1170 mm Working range punching: 3050 x 1525 mm Length: 7870 mm Width: 5880 mm Height: 2666 mm Electrical connected load: 85 kVA x-axis: 100 m / min Hjdpsypt R Hjfx Acbjfg y-axis: 80 m / min Weight of machine approx.: 30000 kg Standard configuration - Patented servo-electric double drive- Punching force 300 kN- 32 tool stations (4 rotatable stations)- max stroke rate: 400- max material thickness 6mm- Automatic focus adjustment- Automatic gas pressure control- HS sensor cutting head- Nozzle cleaning- Splash guard- Good parts flap Extended machine accessories - TSU tool changer 300 Automation

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 1203697, Bros. punching press Make: Haulick & Roos Type: RVD 8/800 NS Press with adjacent console: Haulick & Ross RVD 80-800NS Eccentric press with double connecting rod with 4-fold bearing mounted eccentric shaft No: 1203697 YEAR OF MANUFACTURE: 1990 Press force: 800kN Speed: 30-300/min. Drive: 26kW Ram stroke: 4-60mm Hfsdpfxeudn Uto Acbjg ram adjustment: 80mm Table: 800x640mm Fold-through hole: 780x60-160mm Table over floor: 1240mm Frame width: 780mm Lateral upright width: 350mm Installation height max. stroke bottom/ram top: 300mm Space required for press (LxWxH): 3200x1700x3000mm Control cabinet (LxWxH): 1800x400x 1900mm Weight: 12.000kg Reel: Eigl 2527-90 Driven: no Straightener with strap loop sensor: Eigl RST W37/300 (2528-90) Max. width: 300mm Max. Thickness: 3mm Number of rolls: 5 Feed rate: Haulick & Roos RS 260/120°/2727 Max. Feed length 260mm Max. Width 260mm Max. Max. thickness 3mm Feed speed 40m/min. Material cross-section up to 800mm?

Condition: new, functionality: fully functional, Year of construction: 2023, New Sunrise punch cutting machine IW-45K available from stock. Specifications IW-45K Hedpfovf I Ibox Acbjfg tonnage 45ton punching capacity ᴓ 22x15mm/ᴓ 40x8mm discharge 165mm angle bar 75x75x6mm 90⁰ strip 300x10mm Weight 870 KG Dimension 1050x760x1490mm Multiple models available from stock.

Condition: new, Year of construction: 2023, Sunrise punch-cutting machine IW-80SD Hfjdpfx Asvf I Rcjcbog IW-80SD Specifications tonnage 80ton punching capacity ᴓ 26x22mm/ᴓ 50x12mm discharge 510mm angle bar 150x150x12mm 90⁰ strip 460x15mm / 300x20mm Weight 2550 KG Multiple models available from stock.

Condition: ready for operation (used), Year of construction: 1984, functionality: fully functional, W&H Triumph 1 3 layers Hjdpfx Acjw Nvi Sebjfg Photocell for preprinted reels

Condition: good (used), Year of construction: 2009, operating hours: 899 h, machine/vehicle number: SN20090545, punching force: 30 t, sheet thickness (max.): 6 mm, table length: 2,000 mm, table width: 1,270 mm, overall weight: 11,000 kg, working range: 40 mm, ERMAK RPP 1270x30 Ton Punching Machine, Year 2009 Brand: Ermak Model: RPP 1270x30 Serial Number: SN20090545 Year: 2009 Main Features: Operating Hours: - POWER ON Hours: 899 hours - Punching Hours: 1 hour 6 minutes - Punching Force: 30 tons - Maximum Capacity: - Sheet Thickness: 6 mm - Sheet Dimensions: 1270 mm (width) x 2000 mm (length) - Travel: 40 mm - Axis Travels: - X-axis: 2000 mm - Y-axis: 1270 mm - Travel speed: - X-axis: 70 m/min. - Y-axis: 70 m/min. - C-axis speed: 100 rpm. - Strokes per minute: Up to 700. - Accuracy: - Positioning: ±0.03 mm - Position tolerance: ±0.1 mm - Numerical control (CNC): GE Fanuc 18i-PB - Oil capacity: 300 liters. - Power: 15 kW - Machine dimensions: Hfsdpfxsv S Ufyj Acbjg - Length: 4250 mm. - Width: 4000 mm. - Height: 2330 mm. - Weight: 11,000 kg.

Condition: used, functionality: fully functional, Year of construction: 2001, operating hours: 48,746 h, machine/vehicle number: 9310, control type: CNC control, degree of automation: manual, actuation type: electric, controller manufacturer: Siemens, controller model: 840D, laser type: CO₂ laser, laser source manufacturer: TRUMPF, laser source model: TLF2400 TURBO, laser hours: 22,504 h, laser power: 2,400 W, punching force: 22 t, punching diameter: 76 mm, stroke rate (min.): 600 1/min, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 8 mm, table length: 6,500 mm, table width: 1,250 mm, travel distance X-axis: 3,085 mm, travel distance Y-axis: 1,370 mm, feed rate X-axis: 90 m/min, feed rate Y-axis: 60 m/min, positioning speed: 108 m/min, positioning accuracy: 0.1 mm, repeat accuracy: 0.03 mm, workpiece weight (max.): 200 kg, oil tank capacity: 138 l, power: 70 kW (95.17 HP), input voltage: 400 V, input current: 125 A, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 7 bar, overall weight: 20,000 kg, total length: 8,100 mm, total width: 7,500 mm, total height: 2,400 mm, year of last overhaul: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, TRUMATIC TC600L Y1300 Used laser/punch combination machine. Good overall condition. Fully operational. Machine still in production. Maximum format in combined operation: 2585 x 1280 mm. Hsdpfxsyzhqmj Acbjfg Maximum format in LASER operation: 3085 x 1280 mm. Maximum format in punching operation: 3085 x 1370 mm. Hours powered on: 48,746 h Laser beam operation hours: 2,159 h Activated options: tapping, Multi Tool.