Used Paper Punching Machine for sale (84,537)

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, punching force: 55 t, throat depth: 500 mm, sheet thickness steel (max.): 20 mm, working height: 1,000 mm, overall weight: 1,200 kg, total length: 1,300 mm, total width: 800 mm, total height: 1,800 mm, power: 5.5 kW (7.48 HP), mount diameter: 40 mm, Punching force 550 kN Lajdpfx Ajxyy Aieansk Max. Punching capacity Ø 40 in 10 mm throat depth 500/750 mm Motor power 5 kW Stroke rate with 20 mm stroke 38 /min Maximum stroke 60 mm Machine weight with throat depth 500: 1150 kg

Year of construction: 2006, condition: excellent (used), Bobst Autoplatine Speria 106 E STANDARD EQUIPMENT MACHINE - Centerline system for quick job changeover. - Electronic sheet travel monitoring system. - Adjustable centering at the stripping station. - Control cabinet air conditioning unit. - Bobst electronic control system C.U.B.E. (Control Unit Bobst Electronic). This microprocessor-based Bobst system allows the operator to easily manage, visualize, and monitor the machine’s various functions and components. - Main motor with frequency inverter control. FEEDER - Pile tray with handle for easy manual lateral alignment during production. - Synchronization device ensuring proper sheet arrival to the front lays when the machine is stopped. - Automatic pile lifting controlled by pressing foot. Lasdpexl Talefx Aanjk - Rear pile guides (operator side and opposite operator side). - Adjustable side blowers with Centerline markings. - Suction unit. FEED TABLE - Feed table with anti-static stainless steel covering. - Feed table entrance equipped with lateral ramps. - Four front lays, pairwise adjustable, with front register control. - "Pull" guide (operator side), adjustable with Centerline markings and side register control. - Double sheet detector. - Support plates at platen station entry. - Sheet hold-down mechanism (guides sheets to front lays). - Upper frame with manual lifting device. - Upper transport system for paper, paperboard, and corrugated board. - Transport belts with lateral guides and automatic tensioning system. PLATEN - Gripper reopening device. - Centering and locking for equipment. - Locking the chase to the upper beam. - Cutting force measurement with strain gauge. 1 synthetic supporting plate. 1 upper chase: fixed bottom plate. 1 cutting plate. WASTE STRIPPING STATION - Air-cylinder-driven upper frame lifting. 1 upper pull-out frame (with crossbars and clamps). 1 lower pull-out frame. DELIVERY - Pile tray. - Front jogger. - Adjustable rear and side joggers with Centerline markings. - Braking brush. - Manual non-stop rack. AVAILABLE EXTRAS B MACHINE 1 B-1 Raised machine base C FEEDER 1 C-4 Manual non-stop device E PLATEN 1 E-5 Compensating plate 1 E-55 Micro-adjustable supporting plate centering F WASTE STRIPPING STATION 1 F-31 Quick-lock device for the upper pull-out frame

Condition: used, functionality: fully functional, Year of construction: 1987, sheet thickness steel (max.): 4 mm, travel distance X-axis: 600 mm, compressed air connection: 5 bar, overall weight: 3,900 kg, I stopped producing garden furniture and that`s why I sell it. Good and reliable japanese machine. Many tools,some are brand new Amada original turrets. Manual book exist. Lajdexvmq Eepfx Aanok

Year of construction: 2002, condition: used, machine/vehicle number: 54, Item number: MA961 Manufacturer: Boschert Ljdpfscq Nbwjx Aaneak Type: P-60 Year of manufacture: 2002 Machine-No.: 54 Length [mm]: 1800 width [mm]: 3000 height [mm]: 1991 weight [kg]: 5800 Connected load: 380V / 4 KW Stroke [mm]: 50 Working height [mm]: 915 Punching force [to]: 60 Table size LxW: 1100 mm X 3000 mm accessories: manual table supports

Condition: good (used), Year of construction: 2005, functionality: fully functional, Air table on the right and left 1 spare blade Rear table cover Large color monitor Lsdpfjxy Nv Eox Aaneak

Condition: ready for operation (used), Year of construction: 2008, two side tables 3 spare knives Ledpoxtmhrofx Aaneak total counter 1.7m top condition

Condition: new, Year of construction: 2025, functionality: fully functional, ALMI pipe notcher AL2 for pipes with outer diameter Ø48.3 (1 1/2″) and Ø60.3 (2") mm Pipe notcher for pipes with outer diameter Ø48.3 (1 1/2″) and Ø60.3 (2") mm Easy to attach to the wall Lasdoxyyynspfx Aanjk Ideal for double corner connections Wall thickness max. 3 mm steel, 2.5 mm VA, weight 15 kg

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, ram adjustment: 150 mm, table length: 2,000 mm, table width: 1,200 mm, pressing force: 250 t, stroke adjustment: 40,200 mm, overall weight: 55,000 kg, DGUV certified until: 09/2026, Raster punching and forming press RSU 2500 - 2000 P Lsdpfsxcbbrsx Aanoak Desch compact drive unit Electronic press force measurement system Hydraulic overload protection system 3-piece tie rod cast construction Tool holder Table and ram clamps Raster VWA hydraulic roller feed, band width 500 mm, with Topochrom roller coating Ram area 1000 x 2000 mm Strokes: 20 - 150 1/min Stroke adjustment: 40 - 200 mm Optional with Kohler strip feeding system 20030.400/9-2000.2H Optional with Kaschwig soundproof cabin

Condition: used, Year of construction: 1997, sheet width 750 mm plate length 1250 mm plate thickness 6 mm pressure 30 t max. feed 30/40 m/min Lasdpovuz Sfsfx Aansk throat 950 mm no. of strokes 200 Hub/min oil volume 140 l 4 kW 3200 kg 2500 x 2000 x 1800 mm Features: - Automatic sheet metal shifting - Hydraulic die/punch clamping - Tools included - Light barrier - Foot switch - Operating instructions

Condition: used, Year of construction: 2011, Machine number 8161027 Built in 2011 Max. paper length 12 cm Lodpfxjxx Tu Aj Aanjak Max. paper width 78 cm Air table Yes Side table left Yes Side table right Yes Photo cells Yes Length x width x height 2000.0 × 2280.0 × 1700.0 Weight 1300 kg

Condition: used, Year of construction: 2018, functionality: fully functional, ∙ HT-30C (2018) - Used / Total Counter: 13,534 Lodpfx Aajxivkzsnoak ∙ Language: Japanese ∙ Specifications - Untrimmed Book Size Max: 320 x 235 mm Min: 204 x 136 mm - Finished Book Size Max: 305 x 230 mm Min: 200 x 134 mm - Trim Width Max. 99.9 mm Min. 2.0 mm - Trim Height Max. 51 mm - Maximum Cutting Thickness: 51 mm - Voltage / Frequency: 3-phase 200V 50/60 Hz - Production Speed Max. 440 books/hour (Book Thickness 25 mm, 2 stacked books) Max. 500 books/hour (Book Thickness 10 mm, 5 stacked books)

Condition: used, functionality: fully functional, With this offer, you are purchasing a used ‘Summa S2 160T’ cutting plotter. Item for sale: 1 x Summa S2 Class 160 T series with the following equipment: Collection basket Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Laodpfx Aaoxryf Usnjk Seaworthy packaging and worldwide shipping available on request! A functionality test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: new, Year of construction: 2025, functionality: fully functional, ALMI pipe notcher AL1 for pipes with an outer diameter of Ø26.9 (3/4″), Ø33.7 (1″) and Ø42.4 (1 ¼") mm Lodpfxsxyyyhs Aansak Pipe notcher for pipes with outer diameter Ø26.9 (3/4″), Ø33.7 (1″) and Ø42.4 (1 ¼") mm Easy to attach to the wall Ideal for double corner connections Wall thickness max. 3 mm steel, 2.5 mm VA, weight 8 kg

Year of construction: 2007, condition: ready for operation (used), Punching force: 165kN, max. sheet thickness: 6mm, max. sheet weight: 150kg, max. punching diameter: 76mm, strokes punching/marking: 600/1300 strokes/min, simultaneous speed: 100m/min, working dimensions X/Y: 2000mm/1250mm, tool stations: 15. Machine dimensions X/Y/Z: approx. 6000mm/6000mm/2200mm, weight: approx. 7500kg. Documentation available. An on-site inspection is possible. Laedpfxsxxzhwo Aanok

Condition: used, Year of construction: 1992, number of heads 4 serial no. 92.847 bore diameter 3-8 mm Lodjxu Nt Tspfx Aaneak

Condition: used, Year of construction: 2019, functionality: fully functional, Used paper cutter, but the blade is in excellent condition. Lodpfx Ajxw Nu Neansak

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 9011221, Colour touchscreen, side tables with air, chrome-plated cutting table with air Laedpjxrzklefx Aanek

Condition: repair required (used), 3-column press Lasdpjxxm Aaofx Aanok Installation dimensions: W 350 mm x L 200 mm x H 250 mm incl. roller feed

Condition: new, Year of construction: 2025, functionality: fully functional, ALMI AL-U for zinc spout in pipes with outer diameter from Ø22 to Ø76 mm Pipe notch for zinc spout in pipes with outside diameters diameter from Ø22 to Ø76 mm Ljdpfxoxyyx Rs Aansak for cutting out vent slots from round and rectangular metal pipes from rectangular metal pipes from 22 mm outer diameter Easy to attach to the wall Wall thickness max. 3 mm steel, 2.5 mm VA, weight 7 kg

Condition: good (used), Year of construction: 1991, General Features: • Age: 1991 • Punching/Die-Cutting size: 220 x 260mm • Heavy-duty German industrial design • Solid cast-iron frame for high cutting precision • Electric drive system suitable for continuous production • Designed for commercial printing and finishing operations • User-friendly operation • Long lifetime typical of BUSCH guillotines Laodpexxlbhsfx Aanek Included: • Standard documentation (if available) • Machine as inspected at current location Condition: • Good working condition for its age • Can be tested under power • No known issues reported • Clean mechanical condition typical for BUSCH machinery

Condition: used, Year of construction: 2000, number of heads 2 drilling capacity diameter min. 2 mm drilling capacity diameter max. 15 mm Lajdpov T Nrqefx Aanek serial no. 230 spindle distance 45 - 120 mm bore depth 50 mm Hole distance 3/380 mm

Condition: used, Year of construction: 1988, 220 V frequency 50 Hz combination machine ja extensive accessories ca. 50 Sätze Lasdondz Npjpfx Aansk pressure 50 t

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 647-230, Lid Punching machine without tools Type Hamba 647-230 foil width - 230 mm very good condition - with used embossing calender for worm structure - Power connection: 220/380V - three phases - Additional punching tools available - e.g. Laodpexqg T Nofx Aanjk 1x 2-fold tool - diameter 80.50mm 2x 2-fold tool - diameter 75.50mm 1x 2-fold tool - diameter 59.54mm 1x 2-fold tool - diameter 93.80x120.90mm

Condition: used, Year of construction: 1999, connected load frequency 220 V rated current 263/152 weight of the machine ca. 1 t Laodpfx Aaovvx E Senek

Condition: used, Year of construction: 1990, serial number 28043 weight 3 t pressure 30 t Lasdpfspxri Hex Aanek volt 380 V frequency 50 Hz