Used Papers Mashine for sale (2,534)

Condition: ready for operation (used), Year of construction: 2006, Technical Specifications Cutting Width, Max 920 mm 36.22 in Feeding Depth 920 mm 36.22 in Loading Height, Max 130 mm 5.12 in Knife Speed 45 cycles/min 45 cycles/min Smallest Cut, Automatic (without false plate) 25 mm 0.98 in Csdpfx Afeydip Uepspu Smallest Cut, Automatic (with false plate) 90 mm 3.54 in Clamp Pressure, Min 150 daN 331 lbs Clamp Pressure, Max 3,500 daN 7,716 lbs Backgauge Speed (return way) 200 mm/sec 7.87 in/sec Machine Weight approx. 2,000 kg approx. 4,400 lbs Dimensions (Width x Depth) 1,770 mm x 2,030 mm ~69.7 in x ~79.9 in Power Supply 380V (3 Phase, 50Hz typical) Key Features Control Interface: The 92 XT model features a 15-inch color touch-screen display for operation and programming. Programming: It is a high-performance programmable model, suitable for high-end applications, with job-specific programmable parameters, label and distortion correction. Table Features: It typically includes a chromed air table and enlarged side tables to facilitate material handling. Safety: Equipped with safety beam guards (photocells) and an electronic knife lock for operator protection. Backgauge Drive: Features a ball screw drive for the backgauge, ensuring precise positioning. OptiKnife System: Allows for knife replacement from the front desktop, enhancing safety and convenience.

Condition: refurbished (used), Year of construction: 1989, functionality: fully functional, cutting width (max.): 560 mm, cutting length (max.): 790 mm, overall weight: 7,000 kg, working width: 560 mm, We offer this refurbished Gietz FSA 790 machine, type: paper cutting machine, year of manufacture: 1989. Manufacturer: Gietz Model: FSA 790 Year of manufacture: 1989 Condition: refurbished Machine type: paper cutting machine If you have any questions or require additional information, please contact us by message or phone. Csdpoygkxcefx Afpopu Max sheet size: 790 x 560 mm Temperature control: up to 200° C Max pressure: 150 tons Speed: 5,500 cycles/hour Power consumption: 7.3 kW Heating power: 9.5 kW Weight: 7,000 kg 3x electronic longitudinal foil feed control Works with foil on 1’ cores Capability for both longitudinal and cross foil feed relative to sheet travel 6 heating zones 3 transverse drives 3 longitudinal drives 2 die mounting plates – honeycomb type High-speed suction feeder Machine is in excellent condition, fully overhauled. The electrical cabinet has been modernised to current standards and fitted with the latest control system (automatic contactors). Die-cutter mounting frame included.

Condition: used, Year of construction: 1987, functionality: fully functional, Paper lift for pallets Codpfxjyhc A Ne Afpepu

Condition: excellent (used), I sell a HANG 106DTK paper drill, operational in good condition. There are several Hang drills on offer. Codpsudpc Sefx Afpjpu

Condition: excellent (used), For sale: professional German paper multi-spindle drill HANG 106 DTK 20. Industrial-grade equipment, ideal for bookbinding shops, printing houses, or the production of binders and calendars. Model: HANG 106 DTK 20 Manufacturer: Constantin Hang Maschinenfabrik Göppingen Number of spindles: 4 Drilling diameters: • Cardboard/paper: up to 3.0 mm • Material samples: 2.5 mm / 6.0 mm / 12.0 mm Drive: PRYM Getriebebau geared motor, 50/60 Hz Codpfx Afeudl Anjpjpu Stable cast iron construction Adjustable work table Complete machine, ready for operation Technical condition: very good. Used but well-maintained, no play, with original nameplates and operating documentation.

Condition: good (used), functionality: fully functional, 2-spindle paper drilling machine Hang Powerful and robust Register table with adjustable stops 400V/50Hz Csdsxt Ub Topfx Afpopu

Condition: excellent (used), Year of construction: 2006, MAXIMA MS 115 TSE PAPER GUILLOTINE YEAR OF MANUFACTURE: 2006 Technical Specifications Table/Cutting width [mm]: 1150 Cpjdpfx Afoyghwpspou Knife travel time per cycle [s]: 1.5 Table length [mm]: 710 Max. table distance from knife plane [mm]: 1190 Table height from base [mm]: 900 Beam stroke with knife / stack height [mm]: 125 Beam stroke without knife [mm]: 130 Min. waste in manual/mechanical cutting [mm]: 25/35 Max. beam clamping force [N]: 300 Cutting force [N]: 2000-37000 Saddle/comb feed speed [mm/s]: 130 Program storage time: 1 year Table position tolerance [mm]: 0.01 Power supply: 3x400V/5.5kW

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: SQZK92S16, cutting width (max.): 920 mm, insertion depth: 920 mm, insertion height: 120 mm, 1. SQZK series coming with 15” color display and touch-screen from Japan 2. Storage: 200 programs, each program no limit with request 3. Max Backgauge Speed: 20m/min 4. Knife: Standard Knife 5. Hand wheel adjusting the pressure 6. Language: Multi-language Max.Cutting Width 920 MM Max.Cutting Length 920 MM Max.Cutting Height 120 MM Max.Clamp Pressure 35000N Max.Cutting Speed Cedpfjx Upvqox Afpjpu 45time/min Main Motor 3kw Gross Power 4.3kw Net Weight 2200kg Gross Weight 2500kg Packing Size (L*W*H) 2280*1400*1850mm

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 76745, cutting width (max.): 920 mm, insertion height: 120 mm, Year of production 2015 Technical data: Cutting width: 920 mm Stack height: 120 mm Weight: 2000 kg Power supply: 400 V Machine can be inspected anytime. Works perfectly. Very well maintained. Cpedpox Upumjfx Afpou We are first owners.

Condition: used, Year of construction: 1994, pressing force: 30 t, LIKON 200C Horizontal Baler Technical specifications: - Motor power: 22 kW - Year of manufacture: 1994 - Equipped with oil cooler - Horizontal tying: 4-fold Cpodsyb Ndaspfx Afpou - Pressing force: 30 t - Overall dimensions of the baler: 10,000 x 2,000 x 2,750 mm - Weight of the baler: 10 t - Loading opening dimensions: 1,400 x 700 mm - Bale dimensions: 700 x 1,100 x 1,000–1,200 mm, variable length - Filled with hydraulic oil - No binding wire included - Previously operated without conveyor belt in a print shop, only processed dry-shredded printing waste! - Engine hours: 62,639 The baler is in good condition, ready for operation. PRICE ON REQUEST!

Condition: excellent (used), Four-head paper drill. Several pieces available !!! Cpsdpfx Afjudl Ikopsu Brand Hang Model 106DTK4 Details 4-head paper drilling machine With adjustable drilling heads Operation Electric foot switch, 2 speeds Available directly This additional information is standard for this model. Always check the details carefully during your visit. The 1975 Hang 100DTK4 printing machine is an iconic and reliable piece of equipment that has made a significant impact on the printing industry. Manufactured by Hang, the machine offers advanced features for its time and set the standard for high quality and efficient printing. The Hang 100DTK4 features a robust and durable design, ensuring stability and consistent performance during the printing process. Its printing technology, although conventional by today's standards, allowed for precise and sharp prints with satisfactory resolution for its era. Equipped with user-friendly controls and mechanical automation, the machine offered programmable settings for various printing formats and configurations. Its operation required skilled operators who were able to achieve accurate and repeatable printing results. The printing machine's capabilities extended to a variety of substrates, including paper, paperboard and lightweight cardboard, satisfying a range of printing applications common at the time. Launched in 1975, the Hang 100DTK4 presented a technological advance for its era. Its sustained performance and contribution to the printing industry are remarkable. While newer printing machines with advanced digital technology have emerged, the Hang 100DTK4 remains a historic symbol of performance and innovation in the printing industry in the 1970s. The machine has collector's value and serves as a testament to the evolution of printing technology over the decades.

Condition: ready for operation (used), Year of construction: 1988, technical documents automatic feeder Cedsyagn Tjpfx Afpepu tools and documentation

Condition: like new (used), Year of construction: 2022, functionality: fully functional, overall weight: 4,000 kg, power: 17 kW (23.11 HP), total width: 1,510 mm, total length: 6,500 mm, total height: 1,820 mm, Automatic paper roll paper lid machine with inline packing machine for 8oz and 12oz cups Speed - 70~100 pc/minute Raw material - One-side or two side (polyethylene)film coated/laminated paper (Like the PE coated paper; PLA paper; card boad paper with film) Paper Lid Size - for 8oz and 12oz Working Power - 12kw Cpsdpfsxur Hiox Afpju Total Power - 17KW, Power Source - 3-phase, 380V, 50/60Hz, User Need To Buy Air Compressor

Condition: used, Year of construction: 1996, Wohlenberg 76 paper cutting machine Cpsdpfeyhbr Aex Afpsu Air table, 1 spare knife, tools. Location: Riga

Condition: excellent (used), Year of construction: 1991, Ref:11067 . 1991 Wohlenberg 115 MCS-3 TV Guillotine. Last supplied fully overhauled 2011. Microcomputer programming with static back gauge - 1024 Data-blocks, 1-99 programmes with LED display. Semi or fully automatic cutting Cpsdpfx Ajydnw Dofpju Side air tables L & R Central air table Cutting area illumination Variable pressure hydraulic clamp 2 x HSS knives Safety knife change device - machine assisted Overload device with safety bolt FFM guarding to U.K. HSE specifications Including tools, spares & manuals. Accessories: 2000 Polar LW 1000-4 pile lift 2000 Polar RA4 jogger with air removing roller. Specification: Cutting width, Max: 115 cm Clamp opening, Max: 14.5 cm Depth of rear table, Max: 115 cm Cuts per minute, Max: 40 Clamp pressure : 2.5 - 40 kN Power requirement : 3 kW

Year of construction: 2005, condition: reconditioned (used), functionality: fully functional, How do you do? We are offering you an OCC sorting system consisting of a PaperSpike, type 2000, from the manufacturer Grumbach und Petermann GmbH, with a paper discharge belt, Bollegraaf type HBGT 1200 x 4760 15° and a single-deck star screen, fine, from the manufacturer Lubo Screening & Recycling Systems B.V.. Cpodpfsuanqaex Afpju The machines were dismantled down to the base frame, derusted, primed and finally painted. Defective shafts and rubber stars, the V-belts and spikes from the PaperSpike and pneumatic cylinders were replaced. All bearings and drive chains were replaced and the motors and gearboxes were checked. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: good (used), Nagel Citoborma 180 Paper Drill with Pedestal The machine is in 100% working order. Very good condition. Solid construction – weighs approximately 100 kg. This is one of the newest Citoborma drill models. 380V power supply. One drilling head. Drill diameter: 2-20 mm. Stack height: 60 mm. The drill table is adjustable in all directions (sides, front/back). It has stops for setting the drilling spacing. In addition, the drill has an automatic table lock that releases after each cycle. Cpjdpfox N I Syjx Afpeu The set includes drill bits, tools, a new cutting stick, and instructions.

Condition: good (used), Uchida GA-4W Four-Head Paper Drill Codpfx Aex N I Sajfpepu This machine is in very good condition and ready for operation. Made in Japan. The machine has a number of features that make it easy to use, including: – four drilling heads with independently adjustable positions – a sliding programming bar – spacers for easy setup for drilling holes Technical specifications: Drill diameter: 2-10 mm, Stack height: 50 mm, Head spacing: 65 mm – 330 mm Weight: 370 kg 380V power supply Automatic drilling cycle, controlled by a foot pedal. Sturdy construction on a pedestal. Waste discharge is directed outwards. Front and side margins. Includes operating tools. New cutting stick, drill bits, and sharpener.

Condition: good (used), Nagel Citoborma 480AB Paper Drill This machine is in very good condition. It has four drilling heads. Technical specifications: Cedpfx Ajx N I H Rjfpjpu Drill bit distance: 45-285 mm Drill diameter: 2-20 mm Stack height: 60 mm Weight: 275 kg Automatic drilling cycle, controlled by a foot pedal. Sturdy construction on a pedestal. The drill table is adjustable in all planes. This is one of the newest Citoborma models. Includes operating tools, instructions, and a new cutting stick and drill bits.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, cutting width (max.): 550 mm, insertion depth: 55 mm, type of input current: AC, warranty duration: 6 months, Equipment: safety light barrier, Hydraulic Stack Cutter IDEAL 5560 LT with Easy-Cut, safety light barrier, electric backgauge with touchpad, and program control. The 5560 LT model is additionally equipped with an air table (front and rear table). Features: • Cutting length: 550 mm • Cutting height: 95 mm / *92 mm (*with clamp cover) • Insertion depth: 570 mm • Residual cut: 32 mm / *60 mm (*with clamp cover) • Hydraulic precision drive for blade and clamping bar • New, patented EASY-CUT release system • Enhanced safety with SCS – Safety Cutting System • Air table (front and rear) Codpfxjygcvgs Afpopu • Automatic return of blade and clamping bar from any position • Foot pedal for pre-clamping or cut indication • Electrically operated backgauge with touchpad, multilingual user interface, and digital measurement display • Measurements displayed in cm/inch • 99 programs with up to 99 steps each • Integrated calculator • Electronic handwheel with stepless speed regulation for manual fine adjustment of the backgauge • Three-stage front table LED lighting • Optical cut indicator with high-intensity LEDs • Machine self-diagnosis with error display on the screen • Steplessly adjustable clamping pressure (min. 200 / max. 1100 daN) • Clamping pressure displayed via pressure gauge • Clamp cover • Front table made of die-cast aluminum with stainless steel table covers • High-quality HSS blade • Blade carrier (guided and adjustable on both sides) as well as clamp made of die-cast aluminum • Robust cast iron machine frame • Standard equipment includes a removable tool holder on the rear table, stacking angle, and transport rollers • Optional side tables for right and left available on request

Condition: like new (used), Year of construction: 2020, operating hours: 5,500 h, functionality: fully functional, machine/vehicle number: XZHGB50-12050, Equipment: documentation/manual, PLEASE ONLY SERIOUS ENQUIRIES REGARDING VIEWINGS OF THE PRODUCTION LINE! WE DO NOT INTEND TO DISMANTLE THE LINE IN JANUARY; THE ADVERT COULD NOT BE PROGRESSED OTHERWISE. I am offering for sale a completely unique production line in Hungary. 1. The line manufactures trays suitable for storing 10 eggs, in either continuous or batch operation. From raw material preparation to final delivery, we are offering a complete system for sale. 2. The egg tray production line is located in Bátonyterenye, where a fully serviced industrial site provides all the infrastructure necessary for production. 3. The total output of the line is sold on the domestic market. The complete egg tray production line consists of several units: - Material preparation system, which processes waste paper into mouldable raw material. - HGHY egg tray forming unit, which finalises the trays by drying and hot-air pressing after moulding. - Palletising system, which makes the finished trays ready for transportation. Cpedpfeya Eh Esx Afpeu - Auxiliary systems for air, vacuum, power, gas, and water supply.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, cutting width (max.): 760 mm, Equipment: safety light barrier, STC-Ref:G-172-3199 Schneider Senator-76 e-line ,Year: 1998 format: 0x760 mm equipped: - type: Schneider Senator 76-e-line - safety light beam - rear table guard - datastore for programmes - 1 spare knives - 2 sidelay tables Cedpfx Ajygmf Sjfpjpu - airtable - monitor --> available: 03/2026

Condition: good (used), Perfecta 132 TS Paper Cutting Guillotine The machine is in very good condition and ready for production. Manufactured in 2008. Available immediately from stock. The guillotine can be used as a standalone unit or integrated with cutting systems. Program generation is menu-driven and includes a variety of cutting tasks, such as single cut, programming, multiple cuts, non-cutting hold-down, and automatic actual value transfer. Perfecta premium cutting machines are manufactured in Bautzen, Germany. Perfecta Machine Features: – Interactive User Interface – 18.4” Touchscreen – USB Interface – CIP Data Module – Positioning via Electronic Handwheel – Programmable Holding Pressure – Automated Knife Change from the Front – Quick Knife Change – New Machine Body Cast in One Piece = Increased Stability – Maintenance-Free Electromagnetic Clutch Technical Data: Cutting Length: 1320 mm Maximum Stack Height: 165 mm Infeed Depth: 1325 mm Minimum Cutting Capacity with Sheet Metal Under the Pressure Beam: 77 mm Minimum Cutting Capacity Without Sheet Metal Under the Pressure Beam: 20 mm Maximum Saddle Feed Speed: 300 mm/s Maximum Mechanical Knife Capacity: 44 Cycles/Min Saddle Guidance: Over the Work Table Power Main motor: 4.5 kW Net weight: 3410 kg The machine includes a spare knife, cutting sticks, a pressure plate, documentation, and tools. Codpfx Aox N D Uqefpspu

Condition: good (used), Mohr D 80 ECO Polar Guillotine Manufactured in 2012. Csdox N D Tajpfx Afpspu Very good condition, ready to operate. Mohr Polar is the most recognizable and respected brand of bookbinding guillotines in the world. Made in Germany. Working width: 800mm Stack height: 100mm Machine weight: 1000kg Power supply: 380V Equipment: Programmer with a 5.5″ display and the ability to save 198 programs Chrome-plated table Air table Photocells Intuitive operation Documentation, tools, spare blade, and a safety blade change tool.

Condition: good (used), Perfecta 92 TS ASE Paper Cutting Machine The machine is in very good condition, manufactured in 2011. This machine features a waste removal system. A unique machine on the market. Owned by the same company since new. Under a service contract until the very end. Technical Specifications: Cutting Width: 920 mm Stack Height: 120 mm Weight: 2000 kg Power Supply: 400V Equipment: – ASE Automatic Waste Removal System with conveyor belt (automatically divided work table) – Programmer with 19” touchscreen monitor – CIP-3 and CIP-4 operation, cutting visualization on the monitor – Memory expansion via USB, network connectivity – Photocells – Air table – Cutting line – Chrome-plated table surface – Enlarged side tables – Servo-driven rear saddle control – super-fast operation, always stops at „0” – Hydraulic clamp with smooth force adjustment – User’s manual – Tool set – Press plate Cpsdpox N D S Nsfx Afpsu – Tapping block – Spare knife