Used Parts Washing for sale (13,607)

Year of construction: 2008, condition: ready for operation (used), A vertical washing and drying system for flat glass is offered: 3 cleaning zones, 6 roller brushes, drying zone (warm air), warm water treatment (heating tank), quartz sand filter, recirculation system, suitable for: float glass, laminated glass, load capacity: 150kg/m², glass thickness: up to 15mm, working height: approx. 2000mm. Inspection possible by arrangement. Fedpfx Agex Hff Ss Rsft

Year of construction: 2017, condition: repair required (used), functionality: unexamined, machine/vehicle number: 42004818, used truck washing brush for sale Fodpfox Hfcksx Ag Reft

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, 1 x Parts Washing Machine Kraft K 20 Year of manufacture: approx. 1990 In very good condition Technical data: Drum capacity: 40 litres 24 rpm Dimensions (L x W x H): 0.7 x 0.8 x 0.65 m Ffsdpjx Hffrsfx Ag Rst The machine can be inspected under power.

Condition: good (used), Saw frame, guide rails, connecting rods, feed rollers, new roller shafts, racks, new rack heads, roller lifting hydraulic unit, gang saw frame stand with overhang plates, gang saw flywheel assembly, tight pulley and free-running pulley with bushing and many more parts Fedpswhv Rnefx Ag Roft

Year of construction: 2008, condition: good (used), functionality: fully functional, Bio-Circle Parts Washer 2 units available For active environmental protection Color: green/grey The ultimate cleaning workbench – the parts washer is in good used condition. Protective base made of stainless steel perforated plate The Bio-Circle workbench washer, a compact washing table, uses an electrically operated pump to deliver the cleaning fluid to a 3-way valve. Depending on the position of the 3-way valve, the cleaner can be directed via the hose with washing brush, including storage tray for the work area with articulated hose, or both into the table. Operated with Bio Circle L Liquid, the tank in the parts washer biologically breaks down contaminated cleaning fluids, e.g., after removing oil/grease, by means of microorganisms as per the Bio-Chem Surface Technology operating instructions. Fodpfxofhdnbe Ag Rjft The used units, and/or brushes to be cleaned for natural biological parts cleaning, are equipped with integrated heating, pump, aeration, filter, and have been regularly maintained. A magnet in the drain strainer retains steel particles. The parts washer system is fully functional and in good condition. Environmental protection through eco-friendly cleaning. Dimensions of the parts cleaning unit: Parts washer H 1120 x W 900 x D 600 mm Weight 45 kg. Inspection under power possible by prior appointment. Price / details upon request. All technical data subject to error and typographical mistakes. We sell exclusively to countries within the European Community.

Condition: used, Spare parts for planing machine spare parts REX planing machine spare parts REX Pinneberg Fjdpoqwgtuofx Ag Reft REX JUMBO REX HOMS REX TIMBERMASTER REX UNI

Condition: new, machine/vehicle number: (TAŞ YIKAMA ATAŞMANI), Type: Rubble grader Field of application: Mining Selling price: € 1.000, US$ 1.053 It is special design and manufacturing. Price is representative, for detailed information please contact us. Fjdpfx Aon Tm T Iog Reft

Condition: excellent (used), Trumpf Vectormark laser marker spare part carrier Here we offer you a Trumpf Vectormark laser marker. Trumpf Vectormark Trumpf VMc2 Type: VMc2 Condition: Spare part carrier Scope of supply: (See picture) Fsdpfx Agjfn Rhae Roft (Changes and errors in the technical data, specifications are reserved!) We can answer further questions on the phone for you.

Condition: new, functionality: fully functional, This original KUKA adapter cable is designed to convert connections from KRC4 controllers to be compatible with KRC2 controllers. It ensures reliable signal transmission and easy integration between different KUKA control generations. Specifications: Ffsdpfxexc I S Do Ag Rot Compatibility: KRC4 → KRC2 Controllers Function: Controller connection conversion (adapter) Durable and long-lasting design Supplied with protective carrying case

Condition: good (used), Ceever Spraymaster Turning Spray Washer The Spraymaster series industrial washers are advanced solutions for spray cleaning small and medium-sized components with a capacity of up to 4000 kg. Thanks to a rotating table that ensures even wetting of the parts with the spray jet, these systems guarantee maximum surface treatment efficiency. Inside the treatment chamber, a channel system with strategically positioned nozzles enables complete spray cleaning of all surfaces, thus optimizing chemical, mechanical, and thermal processes in a single operation. Manufacturer: Ceever Type: Spray Master Turning Machine No. Z 429 Load: 500 kg/batch Fodpfxex Ex Nzo Ag Rjft Voltage: 380 volts Current: 90 A Connected load: 62 kW Find more items – new and used – in our shop! International shipping costs on request!

Year of construction: 2002, condition: used, Spare parts for milling machines and lathes Year of manufacture: approx. 2002 Ffedpfoxzfdzox Ag Rjt

Year of construction: 2010, condition: used, functionality: fully functional, machine/vehicle number: 10110300330, Two industrial washing machines from the brand IPSO (HF304C) are being offered. Ffodpew Hgh Iefx Ag Rst Details about the machines can be found in the photos. Both machines have been used for approximately 300 hours. The price is for one unit. Shipping and inspection are available upon request.

Condition: used, Automatic lathe, turning machine with copy attachment UMA Type F1 NK 60 Copy lathe for chuck parts Machine no. 28-0031 Year of manufacture: 1971 Maximum turning diameter: 150 mm Swing diameter over bed: 400 mm Turning length: approx. 200 mm Spindle bore in machine spindle: approx. 42 mm Spindle speeds: 580 / 930 / 1480 / 2380 rpm, 4 steps Main motor power: 5.5 kW Electrical connection: 380 Volt, 50 Hz - Spindle flange for chuck mounting, short taper 55021, size 6, flange outer diameter Ø 180 mm - Spindle speed via 4 gearbox steps - Hydraulic clamping device with expanding mandrel, without spindle bore, clamping diameter Ø 15 mm - Right side with copying slide, copying unit SAUTER Type KMCA 61, with hydraulic feed movement - Left side with cross slide with hydraulic feed movement - Coolant system mounted below the machine bed - Hydraulic unit positioned behind the machine - Operating manual, electrical diagram, hydraulic diagram Space requirement automatic lathe with hydraulic unit (L x W x H): 2900 x 1900 x 1700 mm Fodpfxsib D H Rj Ag Rsft Space requirement automatic lathe (L x W x H): 2400 x 1900 x 1500 mm Space requirement hydraulic unit (L x W x H): 1400 x 850 x 1700 mm Weight automatic lathe: 2400 kg Weight hydraulic unit: 400 kg Total weight with pallet: 3000 kg In good condition

Condition: excellent (used), Kärcher Type: PC 60/130 T / with oil separator (skimmer) attachment kit Kärcher parts cleaner Manufacturing, maintenance, workshops, metal processing - automatic parts cleaners have many applications. The parts cleaners work on the basis of aqueous solutions without solvents. The top loader PC 60/130 T is a fully automatic parts cleaner for parts up to 600 mm in diameter, 310 mm in height and 130 kg maximum weight. The items to be washed are cleaned using three-dimensionally arranged flat jet nozzles using solvent-free, heated Kärcher water-based cleaning agents. The items to be washed rotate on an electrically driven rotating basket during cleaning. The Parts Cleaner PC 60/130 T offers numerous practical details such as an integrated small parts drawer that reliably catches loose parts and coarse dirt particles. Equipment: Operating hour meter Holding ring (stainless steel for turntable) Swivel castors, 2 lockable Timer for cleaning cycle Water level control Oil separator (skimmer) attachment kit See Figure 7 The oil separator (skimmer) extends the service life of the cleaning solution considerably. If the cleaning solution has settled, for example overnight, the oil that has been added floats to the top. The skimmer can now be switched on to remove this oil from the cleaning solution. Specifications Technical data: Pressure (bar/MPa) 1.5 / 0.15 Flow rate (l/h) 4500 Connected load (kW) 5.5 Working diameter (mm) 600 Usable height (mm) 310 Housing / frame stainless steel (1.4301) Tested (by) according to CE Heating power (kW) 4.5 Fedpofu Ikwofx Ag Rjft Max. temperature (°C) 80 Adjustable cleaning time (min) 1 / 30 Payload (kg) 130 Sound pressure level (dB(A)) 65 Tank capacity (l) 100 Number of current phases (Ph) 3 Frequency (Hz) 50 Voltage (V) 400 Dimensions (D x W x H) (mm) 1080 x 1000 x 1250 Very few operating hours as can be seen in the photo. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: good (used), Year of construction: 1997, Rust size: 700 x 650 x 1.100 mm (W x H x L) Fodpfexr At Ijx Ag Reft batch weight: 350 kg heating: electrical, 70 kW temperature: max. 80°C

Condition: excellent (used), Rosink RFL Front Loader - Powerful water-based cleaning - Modular system - Cleaning of tall and long components - Easy operation, compact design - Low-maintenance operation - Base unit in stainless steel - Environmentally friendly Concept With the Rosink RFL front loader, we offer you an economical and user-friendly solution – especially suitable for cleaning tall components. The proven Rosink cleaning technology and the highest quality are thus combined in one system. The system is based on a single-bath system, standard with a rotary table, which can be expanded to a multi-bath system upon request. Within the wash chamber, various programs can run depending on the configuration and requirements, such as washing, rinsing, drying, etc. Features Basic unit in stainless steel 1.4301 Tank with sloping bottom Tanks and wash chamber including cladding and insulation Rotary drive with 4-point bearing Ffjdpfx Aex Exuqjg Ret Pneumatic lifting door with two-hand safety operation Transport trolley or loading table with stainless steel 1.4301 drip tray Pre-filtration via return filter baskets with usable height Selectable filter element: 200 μm or 500 μm Operating panel at the front with PLC for control (5 programs storable) Flat jet nozzle system entirely in stainless steel 1.4301 Automatic refilling system with bath level control Maintenance and inspection hatches for wash and rinse tanks Technical Data RFL 1650, variable depending on configuration Width: 2900 mm Height closed/open: 2800/4500 mm Depth without/with transport trolley: 2650/4500 mm Grid load capacity: 1000 kg Grid dimensions: 1320 x 1320 mm Grid diagonal: 1650 mm Connection voltage: 400 V, 50 Hz, 3Ph/N/PE Control voltage: 24 V / DC Washing capacity: 750 l Rinsing capacity: 500 l Pump capacity (washing): 7.5 kW at 630 l/min at 4.5 bar Pump capacity (rinsing): 4 kW at 250 l/min at 5.5 bar Drying capacity: 12 kW Heating capacity (cleaner): 36 kW Heating capacity (rinsing): 27 kW Weight: 3600 kg Find more items – new and used – in our shop! International shipping costs on request!

Condition: reconditioned (used), Modernized machine with new LTG StoreControl P control system Ffjdpfednfdlsx Ag Rst External dimensions: Height 5000 mm Width 2650 mm Depth 1250 mm plus 300 mm storage table 34 carriers with a payload of 140 kg each with clear usable dimensions: H = 220 mm W = 2220 mm D = 410 mm Chain pitch 254 mm Storage table at 1000 mm above floor level with wooden worktop Color: GRAY, surfaces cleaned, signs of wear may occur Motor power: 1 x 1.8 kW / 400 volts Subject to errors and technical changes Delivery and installation currently mainly in Germany, Austria, and several neighboring countries

Year of construction: 2010, condition: reconditioned (used), functionality: fully functional, Large warehouse clearance from a technical operation in the printing industry, all prices negotiable (OBO) Photo 1: 2 units Becker side channel blowers, 15 kW, as new, €950 each Photo 2: Paper extraction with shredder, 3 kW, Krämer, new, €500 Photos 3–5: Stitching device for commercial web presses, 32/64 pages, suitable for KBA or Rotoman, €1,500 Photo 6: 3rd folding unit for commercial web press, €500 Photos 7–11: 6 various side channel blowers, 0.5–3 kW, €100 to €300, some new Photo 12: Rietschle vacuum pump, 89 m³, overhauled, €500 Photos 13–14: 90° transfer belt, steplessly adjustable, €1,000 Photos 15–17: Roll clamp for paper or drums, 360° rotatable, can be mounted to any forklift, €1,000 Photos 18–19: Chip extraction unit with 4 connections, €1,000 Photos 20–21: Rotary cutter, Dr. Liebe-Herzig, €750 Photos 22–23: 12 units forklift tires, new, size 18x7-8, 14 PLY, €750 Photos 24–25: 2 cutting knives for Polar guillotine (115 cm), once ground, with box, €400 each Photos 26–29: Heavy-duty electric winch, 2 ton pulling force, complete with remote control, €950 Ffedpfx Asx A Ir Rog Rst Photo 30: 12 units Gämmele rotary cutter knives, €600

Year of construction: 2014, condition: used, JetPetroClean container washing station Producer: OU Dontal, Estonia The installation is used to clean the inside of petroleum products tanks, especially railway cisterns. The cleaning process takes place in a closed system using hot water or hot water with detergents. Washing consisted in introducing a washing head through the upper hatch of the tank, and then washing the inside of the tank under a specified pressure. Dirty water was drained to the container tank by means of the lower inlets of the cistern, by means of diaphragm pumps. There, after the separation of impurities, the water returned to the circulation and was reused for further washing. It took about 1 hour to wash one tanker. The next step was to dry the inside of the tank and remove solid waste from the inside of the tank using exhaust fans. After the washing process was completed, the installation was blown through and dried using compressors. 1. Main container unit: 20-feet container - year of production 2014 two main Lowara pumps - year 2014 hydraulic system with pressure gauges washing water tank (water tank 5770 L, waste tank 2540 L) Control cabinet compressed air tank Fedpfx Agehgimds Rsft 2. Auxiliary unit: 20-feet container - year of production 2012 two compressors GD ESM 11-7.5A - year of production 2013 gas generator - year of production 2015 control cabinet Meganex 15 kW electric heaters - year of production 2014 four Soler & Palau CBRT / 2-502 5.5 kW fans - year 2014 two diaphragm pumps compressed air tank 3. Waste container in a container construction 4. Rigid steel pipes and plastic hoses 5. Structures, platforms, stairs and railings for handling tanks 6. Washing heads, knees, valves and other elements of the hydraulic system. . Technical condition: used installation, for technical inspection before restarting.

Condition: defective spare-parts repository (used), ABSCIEX AB SCIEX API 4000 Mass Spectrometer General Information Model API 4000 Manufacturer ABSCIEX Category Mass spectrometer Description The AB SCIEX API 4000TM LC/MS/MS system uses the TurboIonSpray probe and the atmospheric pressure chemical ionization probe and the Atmospheric Pressure Chemical Ionization (APCI) probe to generate ions from liquid samples. The term LC/MS/MS used for the triple quadrupole series is a general term for the combined analytical processes of liquid separation and ionization. analytical processes of liquid separation and subsequent mass spectrometric analysis. The device is configured to perform complex MS/MS analyses, Fodpfx Aevdb Sqeg Reft but can also perform single MS scans (LC/MS) for less stringent analytical requirements. AB Sciex API 4000 The API 4000 LC/MS/MS system enables all MS/MS modes of operation for the complete characterization of biopharmaceutical compounds and the specificity required for new drug development. For pharmaceutical and pharmacokinetic samples, MS/MS provides the sensitivity and specificity required to analyze hundreds of samples per day without extensive sample preparation. For peptides and proteins, molecular weights can be determined with an accuracy of better than 0.01 % at 200 kDa. ( Only as spare part dispenser, because incomplete !! ) Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Year of construction: 1993, Washing height: 2700 mm. Washing machine with infeed conveyor and outfeed conveyor. Water treatment with reverse osmosis. Dimensions of the goods: Total length: approx. 11400 mm. Fsdpfx Aexl Ul Nsg Reft Max. height: 3920 mm. Weight: approx. 4000 kg. Condition: good, second-hand

Condition: as good as new (ex-display), Year of construction: 2025, Schiavo Hydro 3000.6 Max. Glas-height: 3.000 mm Ffedpowd N Urjfx Ag Rjt Thickness: 3-22 mm Prewashingzone / Mainwashingzone / drying zone Stainless steel body 6 brushes (150 mm) maid out of one piece with Incl. water tanks incl. vacuum system for drying zone LED lights on the outled for inspection

Condition: excellent (used), BIO-CIRCLE Type: RWR 80L Auto KST Description: RWR 80 L KST fully automatic SPS parts washer The RWR units from Bio-Circle are the optimum solution for cleaning internal circulation systems without dismantling. The unit is space-saving, quiet and very easy to operate. Thanks to the completely closed system, there is no unpleasant odor from the cleaner or the dirty water. Fsdpstqfbbofx Ag Roft External dimensions → approx. 1200 x 800 x 1050 mm Power supply → 400 V 50 Hz plug 16A CEE 5p 6h Drain → 1 1/4" outlet Technical specification: Type of soiling: limescale, rust (mineral), oil, grease Quantity of parts: Individual parts, small series, small quantities Component geometry: Whole components (without disassembly) Seal of quality: Stainless steel, service package available Maximum filling capacity: 80 L Tank material: V2A stainless steel Electrical connection: 400V / 50 Hz Heating: 4.5 kW Flow rate: 25 l/min Temperature (default setting): 60 °C Total weight of the cleaning system without tank filling: 180 KG Area of application: The RWR 80 L KST fully automatic PLC has been developed for the plastic injection molding sector and can be used wherever cooling channels (circulation systems, pipes) need to be cleaned. Application: Fill the RWR 80 L KST fully automatic SPS with Power Cleaner KST 2.0. As soon as the minimum fill level is reached and the system is switched on, the system starts to heat up. During the heating-up period, the system can already be connected to the tool via the two hoses. The 5-stage cleaning program and the flow direction change run automatically, after the instructions shown on the display have been confirmed. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: as good as new (ex-display), Year of construction: 2025, Schiavo Top 1600.4 Max. Glas-height: 1.600 mm Thickness: 3-19 mm Prewashingzone / Mainwashingzone / drying zone Stainless steel body Fjdpfjvxf Uxjx Ag Reft 4 brushes (120 mm) maid out of one piece with Incl. water tanks incl. vacuum system for drying zone LED lights on the outled for inspection

Condition: as good as new (ex-display), Year of construction: 2025, Schiavo Top 2000.4 Max. Glas-height: 2.000 mm Thickness: 3-19 mm Prewashingzone / Mainwashingzone / drying zone Stainless steel body 4 brushes (120 mm) maid out of one piece with Incl. water tanks Fjdpfjwd Raijx Ag Rsft incl. vacuum system for drying zone LED lights on the outled for inspection