Used Peddinghaus Super 16 for sale (135)

Condition: used, Year of construction: 1986, round bar steel - mm square edge steel - mm L-beam 120 x 13 mm hole punhing press: pressure 60 t hole punching press: throat 510 mm hole punching press: capacity (dia. x thick.) Ø 27 in 17 mm shear: flat material 500 x 14 mm Lhedpot D Nz Aefx Aaner shear: flat material 400 x 16 mm shear: flat material 180 x 20 mm shear: flat material 120 x 21 mm shear: flat material 100 x 22 mm total power requirement 7,5 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 1,8 x 0,9 x 1,8 m Hydraulic Section Shear - Combined

Condition: good (used), functionality: fully functional, Year of construction: 1960, machine/vehicle number: G1 077, control type: manual, degree of automation: manual, actuation type: manual, controller manufacturer: peddinghaus, working width: 340 mm, cutting range flat at 90° (Y-axis): 120 mm, cutting range square steel at 90°: 50 mm, cutting range round steel at 45°: 55 mm, cutting range angle steel at 45° (Y-axis): 100 mm, sheet thickness (max.): 28 mm, working height: 800 mm, overall weight: 3,800 kg, total length: 1,000 mm, total width: 2,400 mm, total height: 2,400 mm, power: 7.5 kW (10.20 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: documentation/manual, electrical contact length stop, foot remote control, well-functioning machine with many tools Lhsdpfx Ajx H R Raeanor

Condition: new, Standaard uitvoering Boren, plasmasnijden, zuurstofsnijden, markeren, verzinken, vlakfrezen, draadtappen, versteksnijden Boren 6 - 75 mm, aan maximum 2250 tr/min, 36 kW Siemens motor Plasma Hypertherm HPR 260 or HPR 400, tot maximum plaatdikte 82 mm Zuurstofsnijden van materiaal tussen 6 en 10 mm, breed gamma aan snijdgassen mogelijk Thermische snijdkoppen staan op extra gestuurde as voor versteksnijden Rollenbaanmeting voor precieze positionering materiaal Gereedschapswisselaar met 12 plaatsen in het magazijn Bijna-droog boren Klemkracht 11 ton Carbidemarkeren (krassen) Stempelmarkeren Technische specificaties Minimum plaatbreedte: 150 mm Maximum plaatbreedte: 1800 / 2500 / 3200 mm Minimum plaatdikte: 6 mm Maximum plaatdikte: 100 mm Plaatlengte: onbeperkt Extra dik boren voor platen dikker dan 40 mm Lsdpfxsgca H Rs Aanehr

Condition: used, linear rail with folding cams Lhedpevcmrgefx Aansr Height adjustable for attachment to hole punches

Condition: good (used), Year of construction: 1988, Ja Stanzkraft 800 kN frequency 50 Hz current 17/11 A voltage 220/380 V round bar steel 32-17 mm square edge steel 30-18 mm 100 x 10 mm flat steel 350 x 16 mm throat 200 mm work height max. 1107 mm total power requirement 4 kW weight of the machine ca. 1,5 t Lhedporyaqyjfx Aansr dimensions of the machine ca. 1200 x 700 x 1850 mm

Condition: ready for operation (used), functionality: fully functional, Peddinghaus Peddycut 275 6-way combined section steel shear Available immediately from site: Peddinghaus section steel shear Type Peddycut 275 Year of manufacture 1987 Pressure capacity 27 tons Table 400 x 250 mm Thrust 90 mm Power 10 mm Drive 1.5 kW Strokes/min 15 Flat steel 50 x 15 mm Angle steel 65 x 6 mm Round steel 28 mm Square bar 25 mm Knife pitch 175 mm Punch stroke 24 mm Lhodpewfdbpefx Aansr Punches 20 mm in 19 mm or 30 mm in 6.5 mm sheet Foot switch Various punches Transport: from site

Condition: ready for operation (used), Peddinghaus extraction system installation cutting machine Year of construction: 2009 Works on 400v Working removed from machine installation Dimensions part 1: 245x180x340cm LxWxH Dimensions part 2: 160x95x285cm LxWxH Transport possible at more price. See also our other ads Also throughout the year we are looking for industrial machines. Do you have redundant machines, mail them to us with pictures and information. Seller is not responsible for typographical or data transmission errors. The machine is age-appropriate in appearance, technology and wear; used machines are sold without warranty. The price shown does not include VAT Peddinghaus-Absaugsystem-Installationsschneidemaschine Baujahr: 2009 Operates with 400 V In funktionsfähigem Zustand aus der Maschineninstallation entfernt Dimensions part 1: 245x180x340cm LxWxH Dimensions part 2: 160x95x285cm LxWxH Transport gegen Aufpreis möglich. Sehen Sie sich auch unsere anderen Anzeigen an Wir sind auch das ganze Jahr über auf der Suche nach Industriemaschinen. Wenn Sie über redundante Maschinen verfügen, senden Sie uns diese per E-Mail mit Fotos und Informationen. Der Verkäufer haftet nicht für Tipp- oder Datenübertragungsfehler. Die Maschine ist optisch, technisch und gebrauchstechnisch ihrem Alter entsprechend; Gebrauchtmaschinen werden ohne Gewährleistung verkauft. Der angezeigte Preis versteht sich exklusive Mehrwertsteuer Lodsvilz Tspfx Aanehr Peddinghaus extraction system installation cutting machine Year of construction: 2009 Works on 400v Working removed from machine installation Dimensions part 1: 245x180x340cm LxWxH Dimensions part 2: 160x95x285cm LxWxH Transport possible at additional cost. Also view our other advertisements We are also looking for industrial machines all year round. If you have redundant machines, email them to us with photos and information. The seller is not liable for typing or data transfer errors. The machine is in terms of appearance, technology and wear and tear in accordance with its age; used machines are sold without warranty. The displayed price is exclusive of VAT

Condition: used, Technical details: Lhjdpfexu Dx Dsx Aaner dimension machine xH: 1,8 x 1,1 x 1,0 m

Condition: used, Professional steel shears for sheet metal fitters, assemblers, workshops, heavy-duty construction sturdy design with scissors body made of hardened and tempered steel Tooth lever transmission Lhsdsc Sc Ifopfx Aanor Lever fuse about torsion spring Blade made of high quality steel, hardened and ground adjustable clamp cut sheets, flat, round and square steel Steel sheet up to mm: 8 Steel up to mm: 20 Square steel up mm: 18 Blade length mm: 175 Net weight kg: 47.5 Dimensions ca. 0.5 x 0.25 m x 2 m

Condition: good (used), Year of construction: 2015, CNC Layout Marking on 4 sides. Roller feed measurement. Independent bottom torch. Lsdpfx Aova Hwksanjhr Siemens CNC Control.

Condition: used, functionality: fully functional, Year of construction: 1993, machine/vehicle number: 4422559493014, Equipment: CE marking, Peddimax 600 Ljdporknnfofx Aanjhr Equipment - Flat, profile, and bar steel shear - Notching & punching unit 600 kN - Mechanically adjustable profile and flat steel hold-down device - Quick-change punch system Punching table - Universal punch saddle - Material support table for notching device - Various punches and dies

Condition: used, Year of construction: 2004, Punching force: 500 kN For example, punch a 20 mm hole in 18 mm steel Stroke triggering via foot switch Assortment of tools is included in the price Weight: 1400 kg Lhjdpfsu Hza Djx Aaner

Condition: used, Year of construction: 2005, round bar steel 32 / 17 mm square edge steel 30 x 18 mm L-beam 100 x 8 mm punching pressure 50 t weight of the machine ca. 900 kg dimensions of the machine ca. 1000 x 700 x 1700 mm Features: - Flat steel shears Cuts flat steel: up to 350 x 13 mm L-steel, 45° cut: up to 100 x 8 mm Blade cutting length: 370 mm Working height: 734 mm - Profile and bar steel shears Shear cross-section: max. 1550 m² Stroke, infinitely adjustable: 10 - 36 mm - Shears with standard blade 90° L-steel 90° cut: up to 100 x 8 mm Round steel: 32 + 17 mm Square steel: 30 x 18 mm U-steel, 90° cut: up to 100 mm Double-T steel, 90° cut: up to 100 mm Working height (center of blade cross): 1044 mm - Notcher with square notcher U-steel, in flange: 80 - 120 mm Double-T steel, in flange 80 - 120 mm Notch width: 44.5 mm Lhedpfx Aaowu Hkfsnsr Notch depth: 50.0 mm Working height: 1000 mm

Condition: used, Year of construction: 2004, Technical details: throat: 510 mm working pressure: 250 bar Punching capacity: 1000 kN t round bar steel: bis Ø 65 x 12 und bis Ø 90 x 8,5 mm electr. connected load: 400V / 50Hz total power requirement: 7,5 kW weight of the machine ca.: ges. 2,6 t dimension machine xH: 1,9 x 1,0 x 2,1 m dimensions L x W x H: Wkz.-Schrank: 0,7 x 0,35 x 0,9 m hydraulic section steel shear Heavy-duty, robust electro-hydraulic hole punch with large throat depth -Punching device: punch holder with punch quick-change device up to Ø 31 mm, stripper size L: 360 x W: 300 mm -Punching table: LxW: 360 x 300 mm, punching support 360 x 300 mm with adjustment device and die holder Ø 50 x 25 mm (equipped with die Ø 16 mm) Number of strokes: -with 10 mm stroke = up to 45 strokes/min. -with 30 mm stroke = up to 22 strokes/min. -with 50 mm stroke = up to 14 strokes/min. Punching stroke: min. 10 mm and max. 50 mm Stroke length and stroke position adjustable Equipped with punch Ø 16 mm Lhodpfxju Ick Tj Aaner Foot switch The punching capacities refer to a material strength of 400 N/mm². Accessories: Various punching tools Punches and dies i.D. *

Condition: good (used), functionality: fully functional, Year of construction: 1978, Equipment: foot remote control, Performance data: Sectional steel shears: L-steel 90° cut 80 x 8 mm L-steel 45° cut 50 x 6 mm Lhodpfxehx Ekpo Aaner Section steel cutter: L-steel 90° cut 60 x 6 mm T-steel 90° cut 60 x 7 mm L + T steel 45° cut 50 x 6 mm Special knives: U-steel 80 mm I-steel 100 mm Flat steel 80 x 12/ 120 x 8 mm Round steel cutter: Round steel 28 mm Square steel 25 x 25 mm Flat steel shear 100 x 11/10 mm triangular notcher 8 mm strokes: 36 1/min drive: 2,2 kW weight: approx. 450Kg Incl. base frame as shown All data without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations of the seller and for any injury to life, limb and health.

Condition: used, functionality: fully functional, Year of construction: 1987, Punching Machine + Profile Steel Shear Mfr. Peddinghaus Type: Peddimaster 40/60H Year: 1987 Technical Data Manufacturer: Peddinghaus Model: Peddimaster 40/60H Lhsdpjxp Ndhjfx Aaner Year of manufacture: 1987 Shearing force: 60 t Punching force: 40 t Profile steel shear: L- and T-angles at 90° 100 x 10 mm at 45° 65 x 8 mm Notching unit with square notcher for sheet metal up to 10 mm Flat bar shear for flat steel 380 x 8 mm or 150 x 14 mm Weight: approx. 1.5 t Dimensions: approx. 1.7 x 1.05 x 1.98 m Accessories - Electric back gauge 3000 mm - Stop table - Adjustable hold-down - Large tool package as per photos All information given without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 1974, round bar steel 63 mm square edge steel 55 mm flat steel 100 x 25 mm Lhjdpfx Aajhxzmcsner engine 380 V, 6,3 kW weight ca. 2.450 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Profile shear for steel with notching unit Ideal for construction sites as it is mobile; of course also suitable for indoor use Lhodpfxow Ip D Hj Aanjr Peddinghaus 13 RP / 10 Angle profile: 60x7mm T-profile: 60x7mm Solid square: 20x20mm Round: 22mm Flat: 90x14mm Lever shear: Tmax: 10mm Pickup location: 28755 Bremen _____ Our general terms and conditions apply; the seller is not liable for typographical or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. Technology and wear of the offered items are age-appropriate. Used machines are sold exclusively to tradespeople and without warranty.

Condition: used, Year of construction: 1991, round bar steel 35 mm square edge steel 32 mm L-beam 120 x 12 mm flat steel 400 x 16 / 200 x 20 mm punching pressure 60 t stroke 10 - 27,5 mm Lodpjv Hti Tsfx Aanehr throat 410 mm punch diameter 27 in 17 mm total power requirement 7,5 kW weight of the machine ca. 2000 kg dimensions of the machine ca. 1800 x 800 x 1800 mm Equipment: - Notcher, hole punch, flat steel blade, angle steel blade - Stop table on hole punch + notcher - Contact stop 1000 mm - 2x foot switches - Operating instructions

Year of construction: 1997, condition: used, machine/vehicle number: 0201-200066, Used Peddinghaus DSC300 DRILL drilling system for CNC-controlled drilling of sectional steel with roller measuring device for length measurement and profile positioning. The Peddinghaus DSC 300 drilling system is a small CNC-controlled drilling system with 3 drilling axes and a roller measuring system for length measurement and material transport. Ljdot Udb Ejpfx Aanjhr

Condition: good (used), Year of construction: 2005, functionality: fully functional, feed length X-axis: 18,300 mm, feed length Y-axis: 1,000 mm, total length: 20,500 mm, drilling capacity: 50 mm, total height: 2,560 mm, total width: 3,500 mm, quill stroke: 330 mm, workpiece weight (max.): 1,088 kg, table width: 1,000 mm, table length: 18,300 mm, 2005 Peddinghaus Avenger MDL1000/B CNC Beam Drilling Line Machine Type: Single Spindle CNC Beam Drilling Line Control: Siemens Sinumerik Year: 2005 Condition: Good. Can be viewed running Lhjdou Nyg Uspfx Aanjr Includes 60ft Table Technical Specification Max Beam Size: 60ft x 40" (18.3m x 1000mm) Max Beam Weight: 730lbs/ft (1088kg/m) Min Drill Diameter: 1/4" (6.5mm) Max Drill Diameter: 2" (50mm) Max Thickness: Up to 10" (250mm) Max Speed X-axis: 120 ft/min (37m/min.) Max Speed Y-axis: 120 ft/min (37m/min.) Spindle Power: 13 3/4hp (10KW) Drilling Feed Rate: 2" – 10" per min (50-254mm/min) infinitely variable Spindle Stroke: 13" (330mm) max Total power: 20 HP (14.9 KW) Power Supply: 400V, 3-ph, 50 Hz Average Output: 200 to 400 holes per hour depending on the profile drilled Approx Floor Space Required: 20.5 x 3.5m Machine Height: 2.56m

Condition: good (used), Year of construction: 1991, machine/vehicle number: 4073756691005, Offer 25360 Technical Data: - Sheet and flat bar shear, blade length: 175 mm Ledpsxupvbjfx Aanehr - Cuts flat steel up to 100 x 15 mm or up to 150 x 10 mm - Profile and bar shear: - Cuts angle steel up to 80 x 8 mm - Cuts round steel up to 32 mm - Cuts square steel up to 30 mm - Punching station: - Punching force: 360 kN - Stroke: 10 to 32 mm - Throat depth: 155 mm - Punches steel up to 20 mm Ø in 14 mm - Or up to 27 mm Ø in 10 mm - Drive: 400 V / 3 kW - Foot pedal - Space requirement approx. W 800 x H 1600 x D 855 mm - Weight approx. 600 kg - Various punch and die sets included

Condition: used, Year of construction: 1999, pressure 30 t plate thickness 800 mm keins weight of the machine ca. 1,3 t Lhedevanvzopfx Aansr

Condition: used, Max. punching capacity: 800 kN Max. shear force: 1100 kN Lhjdpjxf E U Uofx Aanor Punches 27 mm holes in 20 mm steel Shears on the flat steel shear to 500 mm up to material thickness of 18 mm steel Further technical data on request With a range of punches and dies as desired

Condition: used, pressure 80.0 t punching cross-cut in cmm 31.0 in 25 mm shear: flat material 500x18 / 300x22 mm L-beam 150 x 12 mm round bar steel 50 + 25 mm square edge steel 50 + 30 mm throat 510 mm blade length 500 mm work height max. ca. 1.100 mm total power requirement 7.5 kW weight of the machine ca. 3200 kg dimensions of the machine ca. 2000 x 1000 x 2100 mm from a maintenance workshop Furnishing: - Robust electro-hydraulic combined profile steel shears - Notcher, hole punch, bar steel knife, profile knife and tin snips - Stop table at the hole punch, with blank holder - Stop table at the notcher - 2x floating footswitches - Stroke adjustment for fast stroke sequence - 1x PEDDINGHAUS contact length stop: 1.000 mm - Safety devices Lhjdpfx Aajxabi Rsnor - Operating instructions in German