Used Perforating for sale (893)

Condition: new, empty load weight: 3,020 kg, maximum load weight: 11,380 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,480 mm, suspension: steel, tire size: 205/65 R 17,5, color: other, gearing type: other, front tire size: 205/65 R 17,5, rear tire size: 205/65 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height approx. 820 mm, vehicle inside width approx. 2,480 mm, front wall galvanized steel, 600 mm aluminium drop sides foldable and removable, stanchions removable, 40 mm wooden floor, 3 stanchion pockets for 80 x 80 stanchions in the middle, 6 x lashing brackets, outer frame with lashing eyes, reinforced gear support winch with load and fast gear, contour marking and side collision protection, mudguards and spray mist suppression, rear, , surcharge for front wall grille 1.600 mm high (perforated plate), price: 1,400 Euro, , Surcharge for aluminum ramps load capacity per pair 8 t and 2 x folding supports rear, price: 1,800 Euro, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Kedpfxsx Utqlj Adwedg

Condition: used, Horizon AFC-566F: Fully Automatic Combination Folding Machine, used The Horizon AFC-566 F combines high efficiency with easy operation, allowing even inexperienced users to quickly achieve creative folding solutions. With 17 pre-programmed fold types, fully automatic settings, and intuitive Touch&Work technology, you can maximize productivity and handle any challenge. Folding Units - 1st Folding Unit: 6 folding pockets - 2nd Folding Unit: Folding knife plus 2 folding pockets Key Features - Versatility: Handles a wide range of fold types, from simple parallel folds to complex cross and specialty folds - Fully Automatic Settings: From feeder to roller gap adjustment - Touch&Work Technology: For easy and intuitive operation - 17 Standard Fold Types: For diverse folding options - Job Memory: Stores up to 200 jobs - Double Sheet Detection and Sheet Run Monitoring: Ensures high precision - Creasing and Perforating Device: For additional finishing options - Quick Setup: Ready in seconds for maximum efficiency Specifications: - Paper formats: Maximum size: 558 x 850 mm; Minimum size: 128 x 148 mm - Paper weights: 40 – 250 g/sqm - Speed: Maximum: 240 m/min; 30,000 cycles/h in cross fold - Feeder pile height: 740 m - Machine dimensions: Main body: 3,100 mm x 1,090 mm x 1,680 mm (LxWxH); Delivery: 1,320 mm x 600 mm (LxW), height variable - Weight: 1,270 kg - Power supply: 400 V, 5.6 A, 3.2 kW All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Kodpsx T Apnofx Adwjdg Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, Year of construction: 2025, Special price - exhibition machine Technical specification WL 4 Hopper opening with log spacer 600 x 1,050 mm Hopper content 0.6 m³ Working width of the rotor 600 mm Diameter of the rotor 252 mm Drive power 18.5 kW Rotor speed 80 -120 rpm Number of knives 28 Type and size of knives concave / 40 x 40 mm, cutting reversible crowns Screen perforation 15-20 mm Painting WEIMA Standard RAL 2002 / 7016 Connected load 400 V +/- 5% / 50 Hz Weight approx. 1,300 kg Including: • Control cabinet* (Rittal) including electrical control (Moeller / Siemens) and star-delta start-up • Rubber vibration elements • V - rotor (patented) with knife pockets milled into the profile • Gear limit switch • Slider cycle • Slider half back • Log spacer hopper • 2. Knife series Storage location: Supplier Kdsdpjx Twd Tefx Adweg

Condition: used, Year of construction: 2025, Special Price - Showroom Machine Garbsen Our Machine Concept WL 6 The Weima High-Performance - Shredders with their flexible application possibilities can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer scraps, etc.) into fuel chips, achieving enormous volume reduction of material for bulky items. Functionality: The machine is equipped with a large feed hopper and can be fed with a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees continuous and cost-effective material feeding without the need for manual assistance. The hydraulically controlled pusher supplies the wood waste to be shredded to the cutting area of the rotor and is automatically and load-dependently controlled. The internal pusher guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are suspended in a cardanic way to avoid lateral forces on the piston seals. The patented and profiled V-rotor made of solid steel has a diameter of 252 mm and operates with a rotor speed of 80 - 120 rpm. The concavely ground, aggressive, and 4-times reversible knives / cutting crowns are located in milled knife pockets on special knife holders; this patented system guarantees high throughput performance, low energy consumption, and optimum discharge of shredded material by reducing the cutting gap between counter knife and rotor for the first time. The screen located under the rotor determines chip size (10 - 100 mm ). A hydraulically opening screen basket is available upon request. Power transmission from the electric motors is via V-belts to a heavy-duty gearbox mounted on one end of the rotor shaft. Precise cut at high throughput with profiled V-rotor The specially developed by WEIMA V-rotor can be used universally and is made from solid material. Its aggressive material intake with up to two rows of knives guarantees high throughput with low power requirements. It can be equipped with hardened steel cutting knives with edge lengths of 30 mm and 40 mm. These can be turned several times in case of wear, which drastically reduces maintenance costs. Intuitive operation via Siemens PLC control with touch display To ensure that the electronics are optimally matched to the machine, we design, build, and wire our control cabinets ourselves. We use only high-quality components – for example from Siemens or Rittal. Intuitively operated touch surfaces guarantee quick adjustments. Functions such as setting the pusher stroke or stop ensure high throughput. The built-in overload protection also prevents defects on the machine. Technical Specification WL 6Feed opening 800 x 1,250 mmHopper capacity 0.9 m³Rotor length 800 mmRotor diameter 256 mmDrive power 22 kWRotor speed 90 rpmMax. number of knives 42 piecesKnife type and size concave / 40 x 40 mm, cutting crownsScreen perforation 10-60 mmPaint finish WEIMA Standard RAL 2022 / 7016Connection value 400 V +/- 5% / 50 HzWeight approx. 1,600 kgIncluding: - Control cabinet* (Rittal) incl. electrical control (Moeller/Siemens) and S Kodpfxex Twdme Adwodg

Condition: new, empty load weight: 3,080 kg, maximum load weight: 11,320 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,480 mm, suspension: air, tire size: 205/65 R 17,5, color: other, gearing type: other, front tire size: 205/65 R 17,5, rear tire size: 205/65 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height approx. 820 mm, vehicle interior width approx. 2,480 mm, front wall galvanized steel, 600 mm aluminium drop sides foldable and removable, 3 stake pockets in the middle for 80 x 80 stakes, removable stakes, 6 x lashing brackets, outer frame with lashing eyes, reinforced gear support winch with load and fast gear, contour marking and side collision protection, mudguards and spray mist suppression, rear, , Surcharge for front wall grille 1.600 mm high (perforated plate), price: 1,400 Euro, , Surcharge for aluminum ramps load capacity per pair 9 t and 2 x folding supports rear, price: 1,800 Euro, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Kdsdpfjx Tvz Rex Adwjg

Condition: new, empty load weight: 2,980 kg, maximum load weight: 8,920 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,480 mm, suspension: steel, tire size: 235/75 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height approx. 860 mm, vehicle interior width approx. 2,480 mm, front wall galvanized steel, 600 mm aluminium drop sides foldable and removable, stanchions removable, 40 mm wooden floor, 3 stanchion pockets for 80 x 80 stanchions in the middle, 6 x lashing brackets, outer frame with lashing eyes, reinforced gear support winch with load and fast gear, contour marking and side collision protection, mudguards and spray mist suppression, rear, , Surcharge for front wall grille 1.600 mm high (perforated plate), price: 1,400 Euro, , Surcharge for aluminum ramps load capacity per pair 8 t and 2 x folding supports rear, price: 1,800 Euro, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Kdodpfxsx Tvx Ao Adwog

Condition: new, empty load weight: 2,950 kg, maximum load weight: 11,450 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,480 mm, suspension: air, tire size: 205/65R17,5, color: other, gearing type: other, front tire size: 205/65R17,5, rear tire size: 205/65R17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height approx. 820 mm, vehicle interior width approx. 2,480 mm, front wall galvanized steel, 600 mm aluminium drop sides foldable and removable, 3 stake pockets in the middle for 80 x 80 stakes, removable stakes, 6 x lashing brackets, outer frame with lashing eyes, reinforced gear support winch with load and fast gear, contour marking and side collision protection, mudguards and spray mist suppression, rear, , Surcharge for front wall grille 1.600 mm high (perforated plate), price: 1,400 Euro, , Surcharge for aluminum ramps load capacity per pair 9 t and 2 x folding supports rear, price: 1,800 Euro, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Kdodex Tvvzepfx Adwjg

Condition: new, Year of construction: 2025, Workshop workstation with adjustable worktop height – Workbench PowerLift Concept M We offer a professional workshop workstation – PowerLift Concept M. A robust, height-adjustable table designed to meet the needs of demanding users. Key product features: Kedpsww Axqsfx Adwsdg Adjustable worktop height: Reliable mechanical height adjustment allows you to set the working height to individual requirements, ensuring ergonomic and comfortable working conditions. Solid construction: Made of top-quality materials, guarantees stability even under uneven load distribution. Load capacity up to 500 kg: Designed to handle heavy tools and materials, ideal for intensive use. Mobility: Extendable castors allow for easy movement of the workstation within the workshop, without compromising stability during operation. Lighting: Equipped with a professional lamp featuring adjustable light intensity, controlled locally by a dial or through a building management system. Standard configuration includes DALI system lighting. Electrical panel: Standard features include an emergency stop button, three 230V sockets, and a light intensity controller, enhancing both functionality and work safety. An additional fourth socket is located beneath the worktop. Tool board: Perforated panel enables convenient tool organization, helping to keep the workstation tidy. Why choose PowerLift Concept M? As a renowned manufacturer of workshop tables, Karnatech offers a product that is 100% made in Poland, characterized by outstanding quality and attention to detail. The PowerLift Concept is an investment in a durable and functional workstation that will meet the expectations of even the most demanding professionals. Height adjustment range: approx. 760–1130 mm Height adjustment of both the worktop and tool board is carried out mechanically using the included folding crank or any standard power screwdriver. Contact and additional information: Power Lift Concept M is one of several models in our range of workbenches. For more information, please visit the Karnatech website. We invite you to contact us by email or phone for detailed information and to place an order. We also offer the option to build a workstation tailored to your individual requirements.

Condition: good (used), functionality: fully functional, Resonance vibrating screen Screen surface: 1,600 x 3,600 mm with perforated plates on a heavy, stable base frame Kjdjtpawlopfx Adwjdg new electric drive

Condition: new, functionality: fully functional, Year of construction: 2025, Workshop workstation with adjustable worktop height – Workbench PowerLift and Workbench Standard tables. A robust height-adjustable workbench provides the ideal solution for demanding users. Adjustable worktop height: A mechanical and reliable height adjustment system allows the workstation to be tailored to individual requirements, ensuring ergonomic comfort and convenience. Worktop adjustment range: approx. 760-1130 mm Height adjustment for both the worktop and the tool pegboard is mechanical, operated with the supplied folding hand crank or any power screwdriver. Rugged construction: Manufactured from premium quality materials, ensuring stability even with uneven loads. Kdedsww Atuspfx Adwsg Load capacity up to 500 kg: The table is engineered to handle heavy tools and materials, making it ideal for intensive professional use. Mobility: Retractable castors provide easy maneuverability around the workshop without compromising on workstation stability during use. Lighting: Equipped with a professional lamp with adjustable light intensity, controlled either locally via a rotary knob or through a building management system. As standard, the table is fitted with DALI lighting system. Electrical panel: Standard equipment includes an emergency stop button, three 230V sockets and a lighting intensity controller for enhanced functionality and workplace safety. An additional fourth socket is fitted under the worktop. Tool panel: The perforated pegboard allows for convenient tool organization, helping keep your workspace tidy. As a renowned manufacturer of workshop tables, Karnatech offers a 100% Polish-made product, distinguished by the highest quality craftsmanship and attention to detail. PowerLift is an investment in a durable and functional workstation that will meet the expectations of even the most demanding professionals. We also offer more budget-friendly workstations without electric height adjustment, available in various versions. Workstations designed and manufactured in the EU.

Condition: new, Year of construction: 2025, load capacity: 1,500 kg, Perforated Table 1200 x 2400 x 200 mm Kdsdpfx Adox Th Sbeweg Tabletop thickness: 20 mm, hole diameter: 28 mm Swivel range: 360° Height adjustment: Hydraulic motor, 800 to 1200 mm Rotation speed: 0.5 rpm Motor power: 0.75 kW We offer tables in various sizes and load capacities: Fodpz Aer Uft Deq A Tepb Load capacity 500 kg, dimensions 1000 mm x 1500 mm x 200 mm, borehole 28 mm, with manual or automatic height adjustment Load capacity 1000 kg, dimensions 1000 mm x 2000 mm x 200 mm, borehole 28 mm, with manual or automatic height adjustment Load capacity 1500 kg, dimensions 1200 mm x 2400 mm x 200 mm, borehole 28 mm, with manual or automatic height adjustment Load capacity 2000 kg, dimensions 1200 mm x 2400 mm x 200 mm, borehole 28 mm, with manual or automatic height adjustment Load capacity 3000 kg, dimensions 1200 mm x 2400 mm x 200 mm, borehole 28 mm, with manual or automatic height adjustment Load capacity 5000 kg, dimensions 1500 mm x 3000 mm x 200 mm, borehole 28 mm, with manual or automatic height adjustment

Condition: new, Year of construction: 2026, The ideal machine for shredding softwood. Motor: 11/15 kW; 400 V - 50 Hz - 3 ph, Rotor diameter: 260 mm, Hydraulically actuated pusher Screen perforation to choice (12 - 40 mm) Kdodpfxswzarcs Adwsg Extraction port Ø 160 mm Weight approx. 1,100 kg Dimensions (LxWxH) approx. 1805 x 1118 x 1650 mm Colour: blue / grey Requirements for raw material: - Moisture content (atro) must be below 30% - Metal and mineral contaminants such as sand, stones, etc. lead to increased wear. We are pleased to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight and we will document the test with photos and videos.

Condition: new, load capacity: 1,000 kg, Equipment: foot remote control, 1000 kg load capacity complete set incl. hand and double foot remote control (available from 600 kg to 10,000 kg) 3-axis weld positioner with adjustable height with through bore 200 mm table plate diameter 900 mm with T-slots, alternatively with screwed-on solid perforated plate 2000 x 1000 x 200 mm, thickness 20 mm, hole grid 100 mm, diameter 28 mm height (horizontal) min. 0.65 m, max. 1.25 m height (tilted) min. 0.45 m, max. 0.95 m speed from 0.01 - 1.1 rpm tilt up to 135° hand and double foot remote control with speed display very robust price without accessories, accessories available at very competitive surcharge table plate surcharge €1,900 (only in combination with positioner) Kdjdex Th A Hspfx Adweg

Condition: new, Year of construction: 2025, functionality: fully functional, load capacity: 1,500 kg, Perforated Table 1200 x 2400 x 200 mm Tabletop thickness: 20 mm, borehole diameter: 28 mm Includes wireless remote control Swivel range: 360° Height adjustment: Hydraulic motor, 800 to 1200 mm Rotation speed: 0.5 rpm Motor power: 0.75 kW Kdodpfsx Thyrjx Adwsg We offer tables in various sizes and load capacities: - Load capacity 500 kg, dimensions: 1000 mm x 1500 mm x 200 mm, borehole 28 mm, height adjustment manual or automatic - Load capacity 1000 kg, dimensions: 1000 mm x 2000 mm x 200 mm, borehole 28 mm, height adjustment manual or automatic - Load capacity 1500 kg, dimensions: 1200 mm x 2400 mm x 200 mm, borehole 28 mm, height adjustment manual or automatic - Load capacity 2000 kg, dimensions: 1200 mm x 2400 mm x 200 mm, borehole 28 mm, height adjustment manual or automatic - Load capacity 3000 kg, dimensions: 1200 mm x 2400 mm x 200 mm, borehole 28 mm, height adjustment manual or automatic - Load capacity 5000 kg, dimensions: 1500 mm x 3000 mm x 200 mm, borehole 28 mm, height adjustment manual or automatic

Condition: like new (used), functionality: fully functional, load capacity: 1,500 kg, 3D perforated welding table 2000 x 1000 x 200 mm, 100 mm grid, tabletop thickness 20 mm, bore diameter 28 mm. The tabletop is precision machined and extremely robust, weight approx. 750 kg. The Siegmund M Positioner is ideal for welding, assembly and maintenance work. Positioning is accomplished via a manually operated handwheel. Positioner with load capacity up to 1,500 kg. Torque: 900 Nm. Handwheel with handle Ø 315 mm. U-bracket compatibility: System 28. Maximum length of U-bracket: 3,000 mm. A - Working height: 850 mm, B - Column height: 955 mm, C - Overall height: 1,140 mm, D - Base plate width: 600 mm, E - Base plate length: 600 mm. Price includes the table top with legs, but excludes 3D clamping accessories. Kjdpfx Ajx Thwqedwodg

Condition: used, maximum load weight: 13,420 kg, overall weight: 16,000 kg, first registration: 01/2013, loading space length: 7,280 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, loading space volume: 45 m³, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2013, Wagon No. G0113245_1 – Manufacturer: Krone. Kjdpfx Aox Uvuyedwjdg * Sliding roof curtain * Simple corner fittings * Plug-in slat (wood) * Side/rear contour marking * Load certificate Code-XL * Portal door with double locking rods (external) * Side sliding curtain * Forklift accessible * Fixed support legs * Prepared for rail loading * Lashing recesses * Lashing points * Perforated pallet stop bar Used roof curtain. Delivery: IMMEDIATELY AVAILABLE. New curtain. Freshly painted. Portal door with double locking rods (external). Technically ready for operation, superstructure and support legs newly painted. Undercarriage sandblasted and newly painted. UVV valid. BRAND NEW PAINT!!!. LASI CODE XL!!!. Dimensions are approximate. Offer is subject to prior sale, prices are net ex location D-59302 Oelde. For further details, please contact us by phone or email:

Condition: used, maximum load weight: 13,400 kg, overall weight: 16,000 kg, first registration: 01/2013, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,470 mm, loading space volume: 45 m³, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2013, Wagon no. G0113891_2- Manufacturer: Krone. * Sliding roof tarpaulin * Simple corner fittings * Insertable slat (wood) * Contour marking side/rear * Loading certificate Code-XL * Portal door double espagnolette locks (outside) * Side sliding tarpaulin * Forklift accessible Kodpfx Ajx Uvugedwodg * Fixed support legs * Device for rail loading * Perforated pallet stop bar Financing on request. Financing possible. Delivery time: IMMEDIATELY. New tarpaulin. Newly painted. Tensioning ratchets NEW ! Technically ready for use, body and support legs newly painted. Door seals NEW ! Underbody (KTL) cleaned and provided with underbody protection. UVV valid. UVV documents available. Swap body has been repainted in pure white (RAL 9010). NEW PAINT !!!. LASI CODE XL !!!. Dimensions are approximate. Offer subject to prior sale, prices net ex location D-59302 Oelde. Further details on consultation by phone or mail:

Condition: good (used), Morgana Auto Creaser PRO 50 Automatic Creaser The machine is fully operational and ready to use. It is the most efficient creasing system on the market, with a robust construction. Made in England. Non-stop vacuum feeding with the ability to add material during operation. Built-in compressor. Instruction manual included. Manufacturer’s description: The MORGANA AUTOCREASER 50 PRO is one of the world’s most popular automatic creasers, manufactured by the British company Morgana Systems Ltd. The machine allows for strip creasing, line perforation, micro-perforation, and fragmentary perforation. The 7″ color Smart Screen programmer allows for easy machine programming. Ksdpfx Asx N I Izjdwedg Working width up to 500 mm Productivity up to 8,500 sheets/h (A4), 11,000 sheets/h (A5) Paper feeding via a vacuum cylinder Programmable up to 16 creases in a single pass, unlimited number of programs Creasing paper weights from 0.11-0.4 mm (approx. 80-400 gsm) Option to install additional perforating discs – 20, 28, 56, or 90 notches Technical parameters: Maximum format (width/length): 500 x 700 mm Minimum format: 140 x 210 mm Maximum grammage: 0.4 mm (approx. 400 gsm) including laminated material Minimum grammage: 0.11 mm Maximum number of creases in one pass: 16 Number of programs: alphanumeric, unlimited Productivity: 8,500 sheets/h (A4-1 creasing), 11,000 sheets/h (A5-1 creasing) Perforating disc: 1 pc. standard Min. creasing distance from the front edge: 2.5 mm Min. creasing distance from the rear edge: 35 mm Minimum distance between creases: 1 mm Machine dimensions (L x W x H): 1,500 x 682 x 1,224 mm Net weight: 156 kg Power supply: 230V, 50 Hz

Condition: good (used), Foldmaster 400 STM Folding Machine Manufactured by Multigraf, Switzerland. One of the newest models. Four-cassette machine, working format 35 x 65 cm. Standard folds include „Z” „C” „half” „half-fold,” „half-fold,” „altar” „double Z” folds, etc. High-stack elevator feeding. This allows for single-person operation. The machine is in very good condition. 230 V power supply. Folding thickness adjustment from outside the machine (no need to remove the casing for adjustments). New generation Rietschle compressor. Counter with batching function, continuously adjustable vacuum time, pause time, total counter, counting from a preset value, and folding speed display. Continuous speed regulation. Cassette soundproofing. Electric delivery with continuously adjustable speed and photocell operation. Perforating and creasing kit, Polish-language instructions, tools, and spare parts. The folding machine has locking wheels for easy movement. Kdsdpfx Adox N I Hqjwsg

Condition: used, Stow traverse - used. The STOW traverse, 270 cm long in orange, is a load-bearing structural element of storage racks. The orange-coloured beam has a section of 12,5×5 cm. Each beam of the traverse is terminated with catches which allow wedge fixing in the perforation of the frame column. The high rigidity of the beam-to-column connection ensures the longitudinal stability of the racks. The maximum load per pair of beams is 3,000 kg. As the load on a pair of crossbars increases, the rigidity of the crossbar-to-column connection increases. The offer concerns the new crossbar from STOW (PNB0485 / 1.5): Kdodpfjv Uzz Tsx Adwjg Goods code : MTP006837 Length of crosshead : 270cm. Cross-section of the crosshead : 12,5 x 5 cm. Max load: 3000kg Beam: orange Net price : 15 euro each * I have large quantities. * Transport throughout Europe possible. Location: Chmielów/Tarnobrzeg, Poland

Condition: new, Year of construction: 2026, Your advantages: + extremely large cutting unit opening with 1300x1200mm + special rotor suitable for hardwood and softwood + Energy-efficient and powerful with 37 kW at start-up Technical specifications: Colour: grey / blue Feed opening (mm): 1,300 x 1,200 Hopper capacity (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (rpm): 65 - 125 Power requirement (kW): 37 Screen perforation (mm): 30 - 50 mm - selectable Tools: 37/70 knives Extraction nozzle Ø (mm): 200 mm Dimensions: 2430x2410x1735 mm (lxwxh) Weight (approx. Kg): 3,920 Optional for a surcharge: * to shred veneer or paper (anything thinner than 3 mm) - we recommend a segment floor. The machine in preproduction has not yet installed this. Special option at an additional cost. Ksdpfxegbkkrj Adwsdg - 2nd row of knives, for up to 30% more throughput - Fast hydraulics, for increased throughput - Preparation for conveyor belt removal - conveyor belt - HAWK-EYE overbelt magnet --- Optimal pallet size with the option slide extension = 1200x1400 (option slide extension, the cutting unit opening 1300x1700 surcharge + 12,975.00) * is associated with significantly longer production time. * larger machines on request --- Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Condition: ready for operation (used), Year of construction: 2005, operating hours: 17,200 h, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, cutting range flat at 90° (X-axis): 2,500 mm, cutting range flat at 90° (Y-axis): 1,270 mm, AMADA EM2510NT CE (2005) | 20t CNC Turret Punch Press | NT Semi-Automatic | PLN 180,000 net For sale: AMADA EM2510NT CE CNC turret punch press from 2005. The machine is fully operational, currently in continuous use, and can be powered on and tested on site. CE version. ⚠️ Sale includes the machine only – WITHOUT TOOLS ✅ Key information: Kedeyapzcopfx Adwedg • Manufacturer / Model: AMADA EM2510NT CE • Year of Manufacture: 2005 • Type: CNC turret punch press • Punching force: 20 tons / 200 kN • Operating hours: 17,200 h • Condition: fully functional, ready for operation • Last inspection: November 2025 • No faults/alarms on the controller • Machine testing available on site _____ ✅ Technical specifications: • Working area: 2500 × 1270 mm • Sheet re-positioning: up to 5000 × 1270 mm • Max. sheet thickness (mild steel): 3.2 mm • Control: AMADA • Tool turret _____ ✅ Automation (NT) Machine equipped with NT system – semi-automatic: • streamlines sheet feeding/positioning • increases production efficiency ⚠️ Note: This is a semi-automatic system (not full automatic loading/unloading). _____ ✅ Scope of supply: ✔ AMADA EM2510NT CE punch press ✔ complete, operational machine with fixed auxiliary equipment ✔ documentation/manuals NO TOOLING (tooling is not included in the sale) _____ ✅ Application Ideally suited for: • sheet metal component production • perforation and technological hole punching • enclosures, covers, panels, control cabinets • parts for welding and bending _____

Condition: good (used), Grinding and separating line Seydelmann MG 160 B / SEPAmatic 1200 Seydelmann mixer-grinder with lifter for 200 liter meat bins, type: MG160B, plate diameter: 160 mm, dimensions: 2000 mm x 1700 mm x 2200 mm. Switch cabinet, dimensions: 1230 mm x 1000 mm x 600 mm. Kdjdpfx Ajvnbtiodwog Mobile elevating belt, s/s frame, plastic belt, belt width: 370 mm, elevating height: 1950 mm, total dimensions: 2950 mm x 850 mm x 2080 mm. Sepamatic separator, type: SEPA 1200, 400 V, 50 Hz, 12 A, 6 kW, plastic belt, belt width: 180 mm, perforations: 3 mm, total dimensions: 1500 mm x 1400 mm x 1750 mm. S/s trolley with extra drum, perforations: 5 mm, total dimensions: 850 mm x 700 mm x 1100 mm.

Condition: used, Year of construction: 1989, About Bickel - HK 3/50 The Bickel HK 3/50 is a high-performance, narrow-web flexographic printing machine designed for label and packaging applications. This machine is ideal for printing on a variety of substrates, including paper, film, and foil. Key features of the HK 3/50 include its compact design, high-speed printing capabilities, and advanced ink system. The benefits of this machine include its ability to produce high-quality prints at fast speeds, making it an ideal solution for label and packaging converters. Typical applications of the HK 3/50 include printing labels, stickers, and packaging materials for the food, beverage, and pharmaceutical industries. Key Technical Aspects: Dimensions and Specifications : The Bickel HK 3/50 has a compact footprint of 3.5 meters in length, 1.5 meters in width, and 2.2 meters in height. It weighs approximately 2,500 kilograms and has a maximum web width of 330 millimeters. The machine's maximum printing speed is 200 meters per minute. Paper Handling : The HK 3/50 features a 3-spindle unwind system with a maximum unwind diameter of 1,000 millimeters. The machine is equipped with a servo-driven rewind system with a maximum rewind diameter of 800 millimeters. The paper handling system also includes a web guide system and a Corona treatment unit. Kdodex Exatspfx Adweg Printing Unit : The HK 3/50 features 3-6 printing units, each with a maximum printing width of 330 millimeters. The machine uses a flexographic printing process with a resolution of 508 dpi. The printing speed can reach up to 200 meters per minute. Ink System : The HK 3/50 uses a water-based ink system with a chambered doctor blade system. The ink system features a 3-liter ink tank and an automatic ink circulation system. The machine is also equipped with an anilox roll cleaning system. Plate Cylinder : The plate cylinder of the HK 3/50 has a diameter of 250 millimeters and a repeat length of 330-660 millimeters. The plate cylinder is designed for easy plate changing and features a pneumatic clamping system.

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece length (max.): 1,000 mm, workpiece width (max.): 800 mm, workpiece height (max.): 400 mm, spindle speed (min.): 1,000 rpm, spindle speed (max.): 36,000 rpm, Perfect for: Highly efficient 3D milling of small workpieces – precise milling with high output Materials: Plastics, composites such as CFRP/GFRP, model building materials, aluminum Industries: Automotive, aerospace, transportation & logistics, leisure industry, sanitary, boat building, automation _____ Reference number: 1218 Availability: March 2026 Model: 5-axis CNC milling system RT-F 1400 Kjdpfx Asxdwndsdwjdg Spindle data: 8 kW / 6.4 Nm; 1,000–36,000 rpm; HSK E 40 Rapid traverse X/Y/Z: 40/40/30 Workpiece dimensions X/Y/Z: 1000 x 800 x 400 mm Control: SIEMENS – Sinumerik One with HT 2 Tool changer: 12 tools Tables: 1 rotary table Tool breakage and length control: Renishaw TS 27 R Other features: Chip tray, anti-slip perforated tread plate Year of manufacture: 2026 Condition: new