Used Perforator for sale (888)

Condition: used, empty load weight: 7,360 kg, maximum load weight: 25,640 kg, overall weight: 33,000 kg, axle configuration: 3 axles, first registration: 01/2017, suspension: air, tire size: 385/65 R22.5, Equipment: ABS, Krone SD Tautliner | Edscher roof | Coil trough | BPW axles with disc brakes | Toolbox | Tyres: 385/65 R22.5 | Perforated frame for load securing | Subject to errors, input mistakes, and prior sale. Cjdjy E R I Aopfx Ai Ssrh

Condition: used, Year of construction: 2008, Overview This NIKO VP11e is a horizontal pneumatic (membrane) press for whole or destemmed grapes, built in 2008 by NIKO (Nikolaj Šraml s.p., Podnanos, Slovenia). The press is made entirely of stainless steel and runs a fully automatic, multi-stage pressing program once started: grapes are loaded through the two perforated cylinder doors or axially, an internal membrane inflates against the load to extract juice at progressively increasing pressure, and the cylinder rotates between stages to break up ("crumble") the pressed cake ahead of the next drain cycle. Juice drains into a wheeled collection pan under the cylinder with a pump connection; pomace is discharged by rotating the open door face-down over the pan. The press is mounted on castors for repositioning and remains still installed and under power at the seller's winery in Spain. It can be inspected in operation on request. Technical data - Manufacturer: NIKO (Nikolaj Šraml s.p., Podnanos, Slovenia) - Model: VP11e - Year of manufacture: 2008 - Machine type: horizontal pneumatic (membrane) press for grapes, mobile on castors - Cylinder volume: 1,100 L (cylinder Ø 920 mm) - Juice drainage pan (tina) volume: 450 L - Loading doors: 2, 640 x 420 mm each - Max. working pressure: 1.7 bar - automatic multi-stage program (pre-press 0.3 bar, then 0.8 / 1.2 / 1.7 bar for whole white grapes; 0.3 bar, then 0.8 / 1.2 bar for destemmed, fermented red grapes) - Integrated blower for membrane aspiration: -0.2 bar vacuum / +0.2 bar pressure - Power: 2.9 kW, single-phase 230 V (1/N/PE), 50 Hz - Mechanical protection: IP55 Credpfx Aiozk Eqmo Seh - Noise level: < 75 dB - Dimensions: approx. 2,520 x 1,270 x H 1,560 mm (with axial loading extension; 2,350 mm long without it) - Weight: approx. 430 kg Equipment - Pneumatic membrane pressing cylinder with integrated aspiration blower - Wheeled juice drainage pan with pump connection - Electric control panel with automatic pressing programs (incl. draining cycle) - Axial loading option - Safety guard on drive elements, door interlock switch and STOP switch - OEM operating manual (Spanish) Condition Used - still installed and under power at the seller's winery. No further condition report has been provided by the seller; the machine can be inspected in operation on site. Availability Immediately. Location: Spain. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Condition: used, Year of construction: 2008, offer consists of: - high performance-finisher DocuCutter DC-645 Duplo DocuCutter DC-645 high performance-finisher for digital color printing: - feeder: air-suction feeder with lining up - operation: by LCD-display - control: barcode control - PC included - saveable jobs: 80 memories for repeat orders - error avoidance: ultrasonic-doublefeed control eject gate testprogram print mark reader - integrated knives: 6 lengthwise knives + 1 cross knife - size: max. 650x370mm min. 210x210mm - paper weight: 110-350g/qm - loading height: 100mm - creasing each sheet: max. 10 - production speed: max. 1500 sheets/h (A4) max. 720 sheets/h (A3) - power: 230V / 50Hz - 0,3kW - dimensions: 2.240x750x1.115mm - weight: 360kg We can also organize the following for you: Credex Afaropfx Ai Sjh packaging, loading, transport ( by ship or plane) including customs

Condition: used, Year of construction: 1990, total length: 2,550 mm, total height: 1,600 mm, total width: 1,300 mm, - Year: 1990 - Documentation available: Yes Csdpfx Aewmbcyji Sorh - CE certificate present: No - Serial number: 11584/90 - Main motor power [kW]: 11 - Hydraulic unit power [kW]: 1.1 - Number of shafts [pcs.]: 1 - Opening width [mm]: 800 - Opening length [mm]: 1000 - Sieve perforation [mm]: 20 - Number of fixed knives [pcs.]: 25 - Transport dimensions: 2550mm x 1300mm x 1600mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2011, DIRECT FROM PRINTING SHOP We sell this machine on behalf of our customer and try to realize his asking price. However, we are open to offers from your side. offer consists of: - high performance-finisher DocuCutter DC-645 Duplo DocuCutter DC-645 high performance-finisher for digital color printing: - feeder: air-suction feeder with lining up - operation: by LCD-display - control: barcode control - PC included - saveable jobs: 80 memories for repeat orders - error avoidance: ultrasonic-doublefeed control eject gate testprogram print mark reader - integrated knives: 6 lengthwise knives + 1 cross knife - size: max. 650x370mm min. 210x210mm Crjdpfx Aju Sr Szei Sjh - paper weight: 110-350g/qm - loading height: 100mm - creasing each sheet: max. 10 - production speed: max. 1500 sheets/h (A4) max. 720 sheets/h (A3) - power: 230V / 50Hz - 0,3kW - dimensions: 2.240x750x1.115mm - weight: 360kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, Year of construction: 2007, Overview The Enoveneta TOP 15 is a grape de-stemming and crushing machine specially developed for use in wine production. It offers a capacity of 15-16 tons per hour and has a robust design made of AISI 304 stainless steel. The machine has been offered for sale due to non-use by the owner and is in good condition. Technical details  Capacity: 15-16 tons/hour Energy supply: Standard voltage 400/3/50 Motor power: Stalk remover: 2.2 kW Motorized auger: 0.55 kW Weight: 300 kg Dimensions: Length: 2,700 mm Width: 1,000 mm Height: 1,500 mm AISI 304 stainless steel frame on castors Perforated cylinder made of AISI 304 stainless steel with holes in sizes 25/22, 22/22, or 22/18 Functions  De-stemming: separation of the grapes from the stems through a perforated cylinder Crushing: Adjustable beater bar for gentle processing Removable beater bar and cylinder for easy cleaning Juice extraction: Integrated juice extraction system Speed control: Variator for dosing auger and stalk remover Accessories Open lid with removable whipping boom and cylinder Electric control panel Crjdpfsu Tyzqex Ai Seh

Condition: good (used), Morgana Autocreaser PRO 33 Automatic Creasing Machine The machine is fully operational and ready to use. It is the most efficient creasing system on the market, with a robust construction. Made in England. Non-stop vacuum feeding with the ability to add material during operation. Built-in compressor. Instruction manual included. Manufacturer’s description: The Morgana Autocreaser Pro 33 is one of the world’s most popular automatic creasing machines, manufactured by the British company Morgana Systems Ltd. The machine allows for strip creasing, line perforation, and micro-perforation. The 7″ color Smart Screen programmer allows for easy machine programming. Working width up to 330 mm Productivity up to 8,500 sheets/h (A4), 11,000 sheets/h (A5) Paper feeding via a vacuum cylinder Programmable up to 16 creases in a single pass, unlimited number of programs Creasing paper weights from 0.11-0.4 mm (approx. 80-400 gsm) Option to install additional perforating discs – 20, 28, 56, or 90 notches Technical parameters: Maximum format (width/length): 330 x 700 mm Minimum format: 140 x 210 mm Maximum grammage: 0.4 mm (approx. 400 gsm) including laminated material Minimum grammage: 0.11 mm Maximum number of creases in a single pass: 16 Number of programs: alphanumeric, unlimited Productivity: 8,500 sheets/h (A4-1 creasing), 11,000 sheets/h (A5-1 creasing) Crsdpfezt H Rmsx Ai Sjh Min. creasing distance from the front edge: 2.5 mm Min. creasing distance from the rear edge: 35 mm Minimum distance between creases: 1 mm Machine dimensions (L x W x H): 1450 mm x 522 mm x 1224 mm Net weight: 121 kg Power supply: 230V, 50 Hz

Condition: new, Year of construction: 2026, table length 3048 mm table width 1524 mm burner heads 1 Control CNC workpiece weight 1095 kg traversing speed 180 m/min weight 4150 kg dimensions of the machine ca. 9392 x 2232 x 2307 mm Laser cutting system with automatic shuttle table Crodpfx Aisx I Sglj Soh configuration 1. Bodor Power 12kW laser source 2. Bodor Genius laser cutting head with autofocus 3. Bodor Thinker 3.0 control system 4. mortise-and-tenon nameplate welded segmented bed 5. stretched aluminum gantry 6. bodor servo motor and driver 7. bodor rack and pinion 8. one-click processing 9. bodor lightning perforation technology 10. expert database for high-speed cutting 11. automatic adjustment of cutting gas pressure 12. open door protection 13. alarm function for cutting malfunction 14. ergonomic remote control (Bodor Mango®) 15. active anti-collision function 16. intelligent anti-shake 17. gas-saving continuous flow nozzle 18. intelligent maintenance reminder 19. WIFI internet connection 20. water cooler 21. extraction system 22. wear parts set CUTTING CAPACITY: CARBON STEEL (mm) 35 STAINLESS STEEL (mm) 35 ALUMINIUM (mm) 25 OPTIONAL: LANTEK EXPERT II CUT Sotware incl. postprocessor

Condition: new, Year of construction: 2026, table length 4000 mm table width 2000 mm burner heads 1 Control CNC Cedpfx Aiowh Ukyj Serh workpiece weight 2510 kg traversing speed 200 m/min dimensions of the machine ca. 11599 x 3380 x 2718 mm Laser cutting machine with automatic shuttle table Configuration 1. BodorPower laser source 12 kW 2. BodorGenius laser cutting head with autofocus 3. BodorThinker 3.0 control system 4. Bed made of tenon and mortise structure 5. Stretched aluminum portal 6. One-click fully automatic processing 7. Automatic layout of residual material 8. Edge detection and automatic zeroing of the focal length through intelligent detection 9. Bodor Lightning perforation technology 10. 21.5-inch monitor with touch function 11. Intelligent control of gas pressure 12. Automatic adjustment of cutting gas pressure 13. Bodor Mango® ergonomic remote control 14. Active anti-collision function 15. Intelligent vibration protection 16. Intelligent adjustment to overheating 17. Gas-saving nozzles with stable flow 18. Intelligent maintenance reminder 19. WIFI internet connection 20. Water cooling 21. Dust removal function 22. Safety light curtains 23. Extraction 24. Wear parts set CUTTING CAPACITY: STRUCTURAL STEEL 35 mm STAINLESS STEEL 35 mm ALUMINUM 20 mm

Condition: excellent (used), Year of construction: 2010, We sell 156 used stackable-nestable bread crate, make BROBAN KRAT with metal 7 rollies in very good condition. This type of crate, a stackable-nestable bread crate, make BROBAN KRAT, with a capacity of 47 liters and dimensions of 700 x 496 x H 190 mm, offers versatility and convenience for the bakery industry. This crate is designed to meet the needs of both transporting and displaying various types of bread. With its galvanized stacking handle and stacking lugs, the crate is ideal for multi-level stacking, allowing for space-saving and efficient use of storage space. Whether it's organizing stock in the bakery or transporting bread to different locations, this functionality provesto be highly beneficial. The perforated bottom and side walls not only provide strength and durability to the crate but also ensure proper air circulation. This promotes the freshness of the bread by guaranteeing optimal ventilation during both transport and storage. This crate is a versatile solution suitable for all types of bread, from baguettes to artisan loaves. Thanks to its features, it is ideal for bakeries that value both efficiency and maintaining the quality of their products during transport and presentation. Price 2,000 Euro + VAT, negotiable, FCA: Oradea/Romania Cjdpfx Ajvuclgji Sorh Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: new, load capacity: 3,000 kg, Protec KT 3000 HV, hydraulically height-adjustable Load 3000 KG Hand-held remote control with digital display Double foot remote control Cedpot Sk Imsfx Ai Sorh Height approx. min. 700mm tilted to center, height max. 1400mm Diameter of face plate 1400mm Tilt angle min. 135° Speed 0.05 to 0.9 rpm Motor power 3 KW on request with original Siegmund perforated plate octagonal table plasma nitrided 1800 x 25 bore 28mm (surcharge)

Condition: good (used), Year of construction: 2008, Technical data: Printing Section 5 × UV Flexo Printing Units 5 × UV Dryers Web Inspection BST PowerScope 300 – Web Inspection System Unwinder Max roll diameter: 1250 mm Heavy-duty construction with pneumatic shaft and web tension control Integrated splicing table and web guiding system Crjdpfxez A Thbj Ai Seh Rewinder Max roll diameter: 1250 mm (≈ 40 inch) Cold Foil / Lamination Module Enables in-line application of cold foil or over-lamination for premium label finishes (metallic, protective film, etc.) Turn Bar (Web Inversion Unit) Allows reverse-side printing or lamination – flexible for multi-layer label applications Rerailing Section 24” Supports reprocessing or secondary processing of pre-printed materials Additional Modules Die-cutting unit EM 510 (for use with magnetic cylinder, adjustable for gap) Cross-Cutting Cylinder (inline sheeting or perforation – precise longitudinal or transverse cutting) Punching Units (adjustable punching length from 12” to 26”, ideal for perforations, registration holes, or special die-cut shapes in-line)

Condition: good (used), roll diameter: 50 mm, roll width: 310 mm, Roller track curve KNAPP, driven roller row 180°reversing track/ct2169 Manufacturer: KNAPP Cjdpfx Aowyuzvei Ssrh Track width: 315mm / total width: 385 mm Roller width: 310mm Inner curve length: 2300 mm Outer curve length: 3110 mm Inner track distance: 1010 mm Total diameter: 1780 mm Roller material: Steel Roller diameter 50 mm Bearing steel rollers Powder-coated, perforated steel frame SEW Eurodrive drive. Power: 0.25kW, speed: 39m/min

Condition: used, maximum load weight: 29,075 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2019, next inspection (TÜV): 01/2027, total length: 13,820 mm, total width: 2,550 mm, total height: 3,277 mm, Equipment: ABS, Krone Steel Platform Trailer * Krone axles with air suspension and disc brakes Crjdpfxszp Abao Ai Soh * 1st axle can be raised * Pallet box * Stanchion pockets * Stanchions + holders * Perforated strip * Tie-down straps * Storage box * Overwidth signs * 385/65 R22.5 tires * Spare wheel holder We are happy to provide you with further information.

Condition: ready for operation (used), Year of construction: 2010, Belt sander manufactured in 2010. This FORMAT4 Finish 1302 features two internal sanding belt units with pneumatic tensioning and adjustment controls. It includes an analog control panel with dual ammeters, a digital height indicator, and a vacuum/perforated conveyor bed for efficient operation. If you are looking to get high-quality sanding capabilities, consider the FORMAT4 Finish 1302 machine we have for sale. Contact us for further details. Credpozyak Hefx Ai Ssh - Voltage: 400 V / 3-phase / 50 Hz- Power: 32.0 kW- Amperage: 64.0 A- Sanding Units / Stations: 2 internal sanding belt units (P80 and P60 setup with pneumatic tensioning and adjustment controls)- Control Panel: Analog panel with dual ammeters, digital height indicator (Gefran), feed/speed selectors, emergency stop button, key switch

Condition: used, mileage: 48,939 km, power: 90 kW (122.37 HP), first registration: 11/2011, fuel type: diesel, empty load weight: 3,060 kg, maximum load weight: 2,940 kg, overall weight: 6,000 kg, axle configuration: 4x4, wheelbase: 2,300 mm, brakes: other, color: orange, driver cabin: day cab, gearing type: other, emission class: euro5, suspension: steel, number of seats: 3, loading space length: 1,780 mm, loading space width: 1,630 mm, loading space height: 400 mm, operating hours: 5,095 h, Equipment: air conditioning, all wheel drive, cabin, differential lock, immobilizer system, onboard computer, power assisted steering, soot filter, trailer coupling, * German vehicle * First owner * Only 48,939 km on the odometer * Only 5,095 operating hours * All-wheel drive hydrostatic transmission * All-wheel steering, switchable * Condition, see photos * Type: Kiefer Boki HY1251B three-way tipper (optional) with irrigation technology for green spaces and plants. Other possible applications where mobile water is required. * Watering arm Hummel Kommunaltechnik, type GH-U * Due to its mounting on a swivel axis, the watering arm can be swung to the left and right. Everything can be operated from the driver's cab. * The maximum swivel range is 220° * The lifting, extending, and swiveling of the watering arm are controlled via a joystick in the driver's cab * Water system from the specialist manufacturer for irrigation technology, Hummel Kommunaltechnik, type WH-U * Tank with a capacity of 2,000 liters * The water tank can be filled from water pipes, hydrants, or even rivers. * Hose reel at the rear with hose for individual use for watering * 2 pumps, each with 15 bar * 2 trailer couplings * Trailer load capacity: 3,500 kg * Rear hydraulics with electrical connections * Municipal work platform with hydraulic and electrical connections * Bed dimensions: Length 1,780 mm x Width 1,630 mm x Height 400 mm * DIN lashing eyes * Perforated floor * Comfortable cabin with 3 seats * Air conditioning * Differential lock * Municipal lighting and headlights * Joystick control * Rear view camera * Rotating beacons * Leaf spring suspension * Wheelbase: 2,300 mm * GVWR: 6,000 kg * Unladen weight: 3,060 kg * Payload: 2,940 kg If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without a new DGUV, without a new SP, without a new UVV. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: Credozf Nqgopfx Ai Seh We offer and strongly recommend an inspection and examination of the goods so that no false impressions arise in the buyer about the condition and suitability. Inspections and examinations are possible and expressly desired at any time by appointment. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods / vehicle. Subject to change, prior sale, and errors.

Condition: used, mileage: 16,200 km, power: 390 kW (530.25 HP), first registration: 01/2023, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: blue, gearing type: automatic, emission class: euro6, loading space volume: 12 m³, Equipment: ABS, air conditioning, navigation system, parking heater, Service book maintained * Trailing axle unloadable and liftable. ---- Suction excavator MTS DINO12, container volume approx. 12 cbm, stainless steel lining, hydrostatic drive Hydrostat (suction+drive+steer), PLC control with prepared remote diagnostics, radio remote control, HIGH-TIP high tipper with 4 supports, POWERARM strength arm with 7m suction hose, movable strength arm EVO-POWER ARM GEN2, rotary suction pipe system IKE/PERFOR, MTS double fan Power+, HBC control, Industrial Package I: grounding system, Industrial Package II: gas sensor, MTS material separation system, automatic filter cleaning, high-pressure water system 30 l/min, dirty water pump, digital turn assist. ---- * Front axle 9.0 t * Trailing axle, 9 t, steered, unloadable, liftable * Axle ratio i = 4.571 * Electronic Braking System (EBS) with ABS and ASR * Disc brakes on front and rear axles * Parking brake, electronic * Wheelbase 4,200 mm * Driver suspension seat, comfort * Air conditioning * Residual heat utilization * Additional hot water heater, driver cab * Roof hatch/ventilation flap on roof * Interface, Fleet Management System FMS * Trailer socket 24 V, 15-pin * Reverse warning combined with hazard warning lights * M-cabin (medium length) * ClassicSpace M-cabin, 2.30 m, tunnel 170 mm * Sun visor outside, transparent * Compressed air horn * MirrorCam * Bumper, center part towing eyes, coupling mouth * Locking system, with central locking * Comfort locking system * Light sensor * Rain sensor * Predictive Powertrain Control (PPC) * Automatic transmission * Mercedes PowerShift 3 * Driver’s seat heating * Wheel formula 8x4 ENA * 32.0 tonner * Air suspension, rear axle * Navigation system * Axle load measuring device * Tank 430 liters * AdBlue tank 60 liters * Fog lights, LED daytime running lights * 2 LED rotating warning beacons * Headlight cleaning system * Engine OM471, R6, 12.8 l, 390 kW (530 HP), 2600 Nm * Engine version Euro 6, E * High Performance Engine Brake * Gearbox oil cooling * Engine PTO rear, c, hydraulic pump ISO 7653D Cedpfxowruw Us Ai Sjrh * Front spring 9.0 t, 4-leaf * Tow coupling, rear, Ringfeder * Aluminum rims 9.00 X 22.5 * Aluminum rims 11.75 X 22.5, front axle * Aluminum rims 11.75 X 22.5, trailing axle * Cruise control * Weight variant 37.0 t (9.0/10.5/10.5/8.0) * ATS warranty according to terms and conditions, 3 years/250000 km * Refrigerator on engine tunnel * Storage box * EBS * Without spare wheel ---- Sale only to commercial customers! No guarantee for the information! Subject to prior sale! Only our general terms and conditions apply! We are happy to offer you a leasing or financing option.

Condition: used, mileage: 16,200 km, power: 390 kW (530.25 HP), first registration: 01/2023, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: blue, gearing type: automatic, emission class: euro6, loading space volume: 12 m³, Equipment: ABS, air conditioning, navigation system, parking heater, Service book maintained * Trailing axle unloadable and liftable. ---- Suction excavator MTS DINO12, container volume approx. 12 cbm, stainless steel lining, hydrostatic drive Hydrostat (suction+drive+steer), PLC control with prepared remote diagnostics, radio remote control, HIGH-TIP high tipper with 4 supports, POWERARM strength arm with 7m suction hose, movable strength arm EVO-POWER ARM GEN2, rotary suction pipe system IKE/PERFOR, MTS double fan Power+, HBC control, Industrial Package I: grounding system, Industrial Package II: gas sensor, MTS material separation system, automatic filter cleaning, high-pressure water system 30 l/min, dirty water pump, digital turn assist. ---- * Front axle 9.0 t * Trailing axle, 9 t, steered, unloadable, liftable * Axle ratio i = 4.571 * Electronic Braking System (EBS) with ABS and ASR * Disc brakes on front and rear axles * Parking brake, electronic * Wheelbase 4,200 mm * Driver suspension seat, comfort * Air conditioning * Residual heat utilization * Additional hot water heater, driver cab * Roof hatch/ventilation flap on roof * Interface, Fleet Management System FMS * Trailer socket 24 V, 15-pin * Reverse warning combined with hazard warning lights * M-cabin (medium length) * ClassicSpace M-cabin, 2.30 m, tunnel 170 mm * Sun visor outside, transparent * Compressed air horn * MirrorCam * Bumper, center part towing eyes, coupling mouth * Locking system, with central locking * Comfort locking system * Light sensor * Rain sensor * Predictive Powertrain Control (PPC) * Automatic transmission * Mercedes PowerShift 3 * Driver’s seat heating * Wheel formula 8x4 ENA * 32.0 tonner * Air suspension, rear axle * Navigation system Codswruw Ispfx Ai Serh * Axle load measuring device * Tank 430 liters * AdBlue tank 60 liters * Fog lights, LED daytime running lights * 2 LED rotating warning beacons * Headlight cleaning system * Engine OM471, R6, 12.8 l, 390 kW (530 HP), 2600 Nm * Engine version Euro 6, E * High Performance Engine Brake * Gearbox oil cooling * Engine PTO rear, c, hydraulic pump ISO 7653D * Front spring 9.0 t, 4-leaf * Tow coupling, rear, Ringfeder * Aluminum rims 9.00 X 22.5 * Aluminum rims 11.75 X 22.5, front axle * Aluminum rims 11.75 X 22.5, trailing axle * Cruise control * Weight variant 37.0 t (9.0/10.5/10.5/8.0) * ATS warranty according to terms and conditions, 3 years/250000 km * Refrigerator on engine tunnel * Storage box * EBS * Without spare wheel ---- Sale only to commercial customers! No guarantee for the information! Subject to prior sale! Only our general terms and conditions apply! We are happy to offer you a leasing or financing option.

Condition: new, Technical data: Working width mm 1,350 Min./max. working height mm 4 - 170 Sanding belt width/length mm 1,370/2,620 Main motor power kW 18.5 with inverter Feed speed, variable m/min 3.5 - 18 Working units: 1. Unit: "RA" diagonally ribbed contact roller, Sh 86, diameter 160 mm 2. Unit: Combi: rubber-coated sanding roller, diameter 160 mm, 45 Sh Elastic electronic segmented sanding pad "MESAR" with 24 segments Version C: - Elastic electronic segmented sanding pad "MESAR" complete with: - Pneumatic cylinder (on/off) for the automatic raising and lowering of the sanding roller/sanding pad unit - Activation of the sectors via the electronic control system, which synchronizes their engagement with the feed speed and controls the number based on the workpiece geometry, and enables the selection of more or fewer sectors to the left and right of the workpiece. Version 135: "MESAR 24" with 24 segments, segment width 55 mm, complete with B/24 workpiece sensing strip at the infeed Additional equipment: Roller table at the infeed and outfeed for long workpieces Perforated table and conveyor belt Vacuum table with electric fan 4 kW (5.5 hp) integrated into the machine frame Oscillating blow-off device, 2nd unit Touch screen 10.4" display with 'eye S software integration' Codpfehtuvrex Ai Sjrh ATTENTION: IMAGES are EXAMPLE IMAGES of a SIMILAR SD70!

Condition: used, mileage: 1,11,603 km, power: 141 kW (191.71 HP), fuel type: gasoline, gearing type: automatic, first registration: 04/2018, next inspection (TÜV): 03/2027, emission class: euro6, color: grey, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), immobilizer system, navigation system, Special equipment: Crsdpfxsz D Rvlo Ai Soh Exterior/interior mirror with automatic anti-dazzle function, exterior mirror package, business package, navigation system: navigation (USB), service system: real-time traffic information (RTTI), front seat heating, lumbar support for front left and right seats, electrically adjustable, interior mirror with automatic anti-dazzle function, CD drive, dynamic damping control, luggage compartment separation (net), Hi-Fi speaker system, inductive charging cradle for smartphone (wireless charging), interior trim: aluminum interior trim with fine longitudinal grain, light alloy wheels 8x19 (double-spoke 572 M, bicolor), metallic paintwork, navigation system: navigation Plus (USB), head-up display, panoramic sunroof (glass), park distance control (PDC) front and rear, driver assistance system: park assistant, smoker's package, tire system run-flat (with emergency run-flat properties), seat cover / upholstery: Dakota leather, perforated, rear seats mechanically adjustable, sun protection glazing (darkened at the rear) Additional equipment: Storage package, airbag driver/front passenger side, equipment package: ConnectedDrive Services, AUX-IN connection, exterior equipment: high-gloss Shadow-Line, on-board computer, headliner anthracite (BMW Individual), roof rails high-gloss Shadow-Line, anti-theft locking wheel bolts, hands-free system Bluetooth with USB/audio interface, floor mats velours, Isofix mounting for child seat in rear, body: 5-door, automatic climate control 2-zone with automatic recirculating air control, head airbag system rear, head airbag system front, fuel tank: enlarged, luggage compartment floor foldable, luggage compartment floor variable, lighting package, front footwell lighting, rear footwell lighting, reading lights front, reading lights rear, M Sport, engine 2.0 liter - 141 kW 16V, multi-function steering wheel, parking brake electric, wheelbase 2670 mm, rear seat backrest split/folding (40:20:40), low emission according to emission standard Euro 6, heated windshield washer nozzles, side airbag front, service system: ConnectedDrive Services, service system: intelligent emergency call including TeleServices, service system: remote services, seat cover / upholstery: fabric / Alcantara, sports seats front, start/stop system (function), variable sports steering, heat-insulating tinted glazing.

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: Custom made, type of input current: three-phase, total width: 1,800 mm, total length: 14,650 mm, input voltage: 400 V, input current: 16 A, cutting width (max.): 1,800 mm, 22 C – Finn-Convey Industrial Spreading Line (14.65 m x 1.8 m) – Complete with Air-Flotation Description For sale is a professional-grade Finn-Convey industrial fabric spreading and cutting table line, offered as a complete production-ready system. This system is designed for efficient fabric spreading and preparation in high-volume cutting room operations. It enables controlled handling of heavy fabric rolls, precise layer alignment, and smooth material flow prior to cutting. The line has been operated as part of a dedicated production setup together with a Bergman cross cutting saw (unit 114 A). This combination allows efficient pre-cutting of fabric rolls into required lengths before spreading, significantly improving workflow efficiency and reducing manual handling. The equipment has been used in a professional garment factory and was operational prior to factory shutdown. Key Technical Specifications • Total length: 14.65 meters (modular structure, adjustable configuration) • Table width: 1.80 meters (suitable for wide fabrics) • Technology: Air-flotation table system for low-friction material handling • Drive system: Motorized side drive units ensuring controlled spreading tension System Components • Finn-Convey motorized side drive units • Industrial air-flotation table structure with perforated surface • Integrated blower system with centrifugal fans under tables • Electrical control cabinet for system operation • Fabric roll handling stands and support assemblies • Integrated end cutting unit with circular blade system Cutting Unit Technical Details • AC speed-controlled motor (Taili Motor Co., Ltd., approx. 90–200W range)14650 • Gear reduction unit (e.g. 5GN-series) for high torque output • Circular cutting blade with integrated sharpening mechanism • Adjustable vertical guide rails for cutting height positioning • Designed for efficient cutting of multi-layer fabric stacks Auxiliary Drive Components • Auxiliary induction motor (e.g. 40W class, speed-controlled) for fine positioning and movement control • Gear-driven transmission for stable and continuous operation • External capacitor-based start system (typical for single-phase auxiliary motors) System Architecture • Modular table construction allowing flexible layout adjustments • Air-assisted material movement reducing friction and operator effort • Cradle-type roll handling enabling tension-free fabric feeding • Encoder-based or mechanical length control depending on configuration • Compatible with upstream roll cutting equipment and manual or semi-automatic workflows Production Advantages • High efficiency with long cutting layouts and reduced material waste Crsdpfx Aijy Au Als Sjh • Excellent ergonomics, heavy fabric stacks can be moved with minimal force • Accurate layer alignment supported by controlled drive system • Integrated cutting capability improves workflow continuity • Suitable for a wide range of materials including denim, upholstery, and technical textiles Condition Used industrial condition Removed directly from production after factory shutdown Typical signs of use from industrial environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Location Valga, Estonia Removal & Transport Buyer responsible for dismantling, loading, and transport Professional dismantling strongly recommended due to system size and electrical installation

Condition: as good as new (ex-display), functionality: fully functional, A very nice folding machine is for sale. Brand: Tachoplus, model TC 6012. Cjdpsz Hbaasfx Ai Ssrh Paper weight up to 350 grams, size DIN A3, 20 programs. Comes complete with a user manual. You are welcome to test this machine at our location. We can arrange transportation and packaging for you and load it into a truck or container. Please request a price including transportation (location within the Netherlands). Best regards, Henk Hoos.

Condition: used, first registration: 04/2025, Year of construction: 2025, Equipment: ABS, Kögel MEGA S24 MEGA, lift axle on the 1st axle, lifting roof, Vario Loch-FIX frame, BPW axles, pallet stop strips left and right, sliding curtain sides, sliding roof cover, toolbox, 1st owner, as new condition. Permissible kingpin load: 12,000 kg Technical possible kingpin load: approx. 12,000 kg Permissible axle load: 24,000 kg (8,000 kg per axle) Technical possible axle load: approx. 27,000 kg (9,000 kg per axle) Permissible total weight: 36,000 kg Technical possible total weight: approx. 39,000 kg Unladen weight, basic equipment: approx. 6,130 kg Unladen weight, individual configuration: approx. 6,582 kg Theoretical payload: approx. 29,418 kg Floor load capacity according to DIN EN 283 with test axle load 7,200 kg (A) Wheelbase: approx. 6,390 mm (A1) Axle spacing: approx. 1,310 mm (A2) Axle spacing: approx. 1,310 mm (D) Overall length: approx. 13,950 mm (E) Overall width: approx. 2,550 mm (F) Internal loading length: approx. 13,620 mm (G) Internal loading width: approx. 2,480 mm (G2) Rear through-loading width: approx. 2,480 mm Tire size: 445/45R19.5 (H1) Loading height unladen, driving position level: approx. 1,020 mm (H2) Loading height laden, driving position level: approx. 990 mm (H3) Achievable dock height at rear with kingpin height 910 mm, loaded, raised: approx. 1,200 mm Ride height set to 265 mm. (K) Side through-loading height, internal: front approx. 2,735 mm - 2,860 mm [adjustable by 5x25 mm], rear approx. 2,810 - 2,860 mm [adjustable by 1x50 mm] (K1) Height under roof, internal: front approx. 2,875 mm - 3,000 mm [adjustable by 5x25 mm] | rear approx. 2,950 mm - 3,000 mm [adjustable by 1x50 mm] (X1) Overall height unladen, driving position level: = H1 + K + T +/- body height adjustment | = S + P + K + T +/- body height adjustment (X2) Overall height laden, driving position level: = H2 + K + T +/- body height adjustment Superstructure settings: The “Mega” superstructure design allows a height adjustment of 5x25 mm at the front and 1x50 mm at the rear. The relevant heights (total height, lateral through-loading height, internal height) change accordingly depending on the selected body setting. (T) Roof construction height, side: approx. 180 mm. Due to the design of the roof beam, the internal pallet-width height corresponds to the specified internal height under the roof. (N) Front overhang (according to ISO 1726): approx. 1,685 mm (N1) Front overhang radius (according to ISO 1726): approx. 2,040 mm (O) Rear swing clearance (according to ISO 1726): approx. 2,300 mm (P) Construction height above king pin: approx. 90 mm (S) Possible kingpin height unladen: approx. 930 - 1,060 mm, horizontal at approx. 930 mm (Pay attention to overall height!) Braking system in accordance with ECE-R13 Electrical system in accordance with ECE-R48 Wabco brakes, air suspension BPW triple-axle assembly ECO Air with disc brakes Ø 370 mm, ET 120, 260 mm air suspension stroke. 6 x 445/45 R 19.5 tires Pallet stop strips made of steel with VarioFix hole pattern (bolted), left and right in the direction of travel Vario Fix steel-perforated outer frame with 3 pairs of stanchion sockets Mechanical/hydraulic lift mechanism, lift height from lowest position approx. 500 mm/600 mm, 4 operating levers at each corner stanchion. Complies with safety regulations according to BGV D 29. (Lifting roof can only be operated with doors open!) Load securing certificate according to EN 12642 XL (VDI 2700). Road transport only. Codpfx Aioz Hd D Us Ssrh "Daimler load securing DL 9.5" certificate

Condition: used, mileage: 6,55,860 km, power: 427 kW (580.56 HP), first registration: 10/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 10/2026, brakes: retarder, gearing type: automatic, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, SCANIA S580 – V8 – ACC – RETARDER – STAND-UP A/C – LEATHER – VEHICLE HISTORY 1ST OWNER GERMAN VEHICLE VIDEO AVAILABLE UPON REQUEST MAINTENANCE CONTRACT WITH SCANIA! ----SCANIA S580 V8 MEGA Mileage: 655,860 km Engine & Drive: Scania S580 V8 * 16,353 cm³ displacement * 427 kW (580 hp) * Diesel * Euro VI-D * Automatic transmission * Retarder Crodszpgqlopfx Ai Ssh * Differential lock * Cruise control (ACC) * Traction control (TC) Chassis: 2-axle semi-trailer tractor * Axle 1: Air suspension * Axle 2: Air suspension * Twin tires * Alcoa aluminum rims Tires: Front axle: 355/50 R22.5 * Rear axle: 295/60 R22.5 Fuel System: Fuel tank 450 liters * Fuel tank 300 liters * AdBlue Cab: * Stand-up heater * Stand-up air conditioning * Automatic climate control * Refrigerator * Sunroof * Leather floor covering * Perforated leather seat (driver) * Seat heating * Seat ventilation Comfort: Electric windows * Heated exterior mirrors * Multifunction steering wheel * Leather steering wheel * Electric parking brake Assistance Systems: Adaptive Cruise Control (ACC) * Lane departure warning system * Traction control (TC) Infotainment: Navigation system * Scania Infotainment Premium Technical Data: First registration: 07.10.2019 * Vehicle class: N3 * Semi-trailer tractor * Permissible total weight: 18,000 kg * Technically permissible total weight: 19,500 kg * Unladen weight: 8,607 kg * Axle load: 10,818 kg * Number of axles: 2 * Number of driven axles: 1 * Maximum speed: 90 km/h * Wheelbase: approx. 3.75 m Dimensions: Length: 5,960 mm * Width: 2,550 mm * Height: 3,789 mm Axle Loads: Front axle: 8,000 kg * Rear axle: 11,500 kg Special Features: With roof spoiler (4,000 mm) * Approved total weight as a semi-trailer vehicle: 40,000 kg * Up to 44,000 kg in combined transport according to §53 exemption regulation possible. ----* EXPORT SALES ONLY WITH DEPOSIT MIN. 500¤ - 2000¤ ----EXPORT REGISTRATION CUSTOMS EXW IN 10 MINUTES (APPROVED EXPORTER) 5 DAYS, 30 DAYS LICENSE PLATES AND 17 - 21 DAYS AUSTRIA LICENSE PLATES EURO 1 VEHICLE RESERVATIONS PLEASE ONLY VIA THE EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! For sales to the EU and third countries, a deposit of at least €500.00 / €1,000.00 will be charged. Changes, errors and prior sale reserved! You can find more vehicles on our homepage: Sales are exclusively made according to our general terms and conditions - see homepage Important note - Important information: Despite careful checking of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it is information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: used, functionality: fully functional, total width: 1,600 mm, total length: 1,600 mm, total height: 2,500 mm, Industrial Stone Separation System for Denim & Garment Finishing Lines The Tonello Mini Destoner is a professional industrial stone-removal unit manufactured by Tonello S.r.l., Italy. The machine is designed to efficiently separate pumice stones from garments after the stone-washing process, protecting downstream equipment while reducing manual handling and improving production efficiency. Integrated into professional garment finishing lines, the Mini Destoner allows garments to tumble inside a rotating stainless steel drum while pumice stones pass through the perforated separator and are collected in a dedicated container below. This unit was previously part of the MASI JEANS industrial denim finishing line and is suitable for integration with Tonello and other industrial garment washing systems. Technical Specifications • Manufacturer: Tonello S.r.l. • Model: Mini Destoner • Machine Type: Industrial Garment Stone Removal Unit • Application: Automatic separation of pumice stones after garment stone washing • Machine Compatibility: Tonello G1 330 HS and other Tonello industrial garment washing machines • Internal Reference: K344 • Country of Manufacture: Italy • Construction: Stainless steel rotating drum mounted on heavy-duty steel frame • Drum Protection: Perforated conical safety separator • Electrical Supply: Typically 400 V, 3-Phase, 50 Hz (to be verified during inspection) Key Features • Designed specifically for post stone-wash garment processing • Efficient separation of garments and pumice stones • Stainless steel rotating drum • Heavy-duty perforated separator cage • Integrated stone discharge chute • Mobile industrial steel frame with locking caster wheels • Operator control panel • Heavy-duty industrial construction • Suitable for continuous production environments Includes • Tonello Mini Destoner unit • Stainless steel rotating drum • Steel support frame • Perforated separator cage Cedjzmwlhspfx Ai Sorh • Stone discharge chute • Operator control panel • Collection container • Industrial transport crate Applications • Denim stone washing • Garment finishing • Pumice stone removal • Industrial laundry operations • Textile wet processing • Denim manufacturing • Industrial garment production Condition • Previously used in professional denim production • Good industrial condition • Structurally complete • Includes all major mechanical assemblies • Normal cosmetic wear consistent with factory use • Available for inspection before dismantling Location Valga, Estonia Dismantling & Transport Buyer is responsible for disconnecting, dismantling, loading, transportation, and all related costs. Professional handling is recommended due to the industrial construction of the equipment. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation. The machine is available individually or together with the complete Tonello industrial washing and finishing line.