Used Pet Machine for sale (65,635)

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: CNC control, degree of automation: automatic, controller manufacturer: KIMLA, laser type: fiber laser, laser source manufacturer: IPG, laser power: 6,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 14 mm, sheet thickness aluminum (max.): 12 mm, sheet thickness brass (max.): 12 mm, sheet thickness copper (max.): 12 mm, table length: 3,100 mm, table width: 1,600 mm, working length: 3,100 mm, working width: 1,600 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 120 mm, cutting speed: 10,800 mm/min, type of cooling: water, overall weight: 10,000 kg, total length: 8,200 mm, total width: 2,800 mm, total height: 2,400 mm, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, * Dual automatic shuttle tables ensure continuous operation: while cutting on one pallet, the operator can load or unload the other. * Beam-shaping module for adjusting the laser beam profile. * The optical delivery fibre includes a safety circuit preventing operation with a damaged fibre or connector. * Automatic oxygen/nitrogen assist gas distribution with pressure control, low-pressure protection and real-time adjustment. * Compressed-air cutting capability. * Automatic cutting head height control with collision protection and nozzle height calibration. * Automatic sheet position detection aligns the toolpath with the sheet and supports automated loading. * X- and Y-axis linear motors with a 20 kHz control loop provide high dynamics on complex contours. * Dual-sided linear motor gantry drive enables high acceleration without loss of geometric accuracy. * Renishaw absolute position measurement ensures precise positioning, straight cut edges and gantry skew correction. * Monolithic, FEM-optimised frame with composite-concrete-filled chambers; no special foundations or anchoring required. * Linear guide and actuator mounting surfaces are machined in a single setup for high rigidity and accuracy. * Automatically locked front doors with laser-protection windows and protective glazing. * Integrated cooling unit with digital temperature stabilisation. * Steel slat-bed pallets with precision mechanical locking. * Servo-controlled chain-driven pallet changer; table changeover speed: 1 m/s. * Automatic diagnostics, diagnostic reports and free remote internet diagnostics after warranty. * Common DC Bus technology recovers braking energy and reduces power consumption. * Integrated CAD, CAM, CNC nesting and control software with DXF/DWG editing, process selection and toolpath generation. Iijdpfx Aszu Nm Helxjf * Software can be installed on additional workstations for offline cutting-plan preparation. * Ethernet connectivity enables integration with IT and production systems. * Parts, sheets and reusable remnants libraries support nesting on partially used sheets. * Project-specific process parameters can be adjusted without changing subsystem settings. * Automatic trim-cut generation for partially used sheets. * Multifunction control panel with keyboard, mouse, USB and gas-pressure controls. * Patented Dynamic Vector Analysis with real-time Ethernet drive communication. * Zoned fume extraction, pulse-cleaned dust collector and laser safety barriers around the pallet exchange area. * PC-CAM imports DXF/DWG files and automatically generates G-code, allowing job preparation at the machine. * Dynamic Vector Analysis maintains high speed on complex contours and shortens cutting times. * High-power-density linear motors provide high acceleration and dynamics. * The compact monolithic frame is welded and machined in a single setup for high rigidity and geometric accuracy. * The electrical cabinet is mounted above the machine, reducing its footprint. Side doors provide easy access to the cutting table.

Condition: used, functionality: fully functional, Year of construction: 1989, Working width: 6.0 m Isdjzu Ilzjpfx Alxjif Bending capacity: 1.25 mm steel Year of manufacture: 1989 Condition: Good Includes motorized slitting shear Includes digital control system (retrofitted)

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: EDGE PLUS 1500 x 3000mm / 1500 x 4000mm, control type: CNC control, laser type: fiber laser, laser source manufacturer: RAYCUS - MAXPHOTONICS - IPG, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, safety light barrier, * Raycus, MaxPhotonics, and IPG resonators. * Raytools, Precitec, and Bochu laser cutting heads. * LYNCA/CYBELEC, Eurosoft, ESA CNC systems. * 21.5'' touchscreen for high ease of use. * Dual table cutting system with side loading and motorized table exchange. * Occupies 40% less floor space compared to a standard fiber laser cutting machine. * Easy and cost-effective transportation. * CE compliant. * Compact design with a transverse, removable cutting table. * Can be equipped with fiber laser sources ranging from 2kW to 12kW. * Working range: 1,500mm x 3,000mm and 1,500mm x 4,000mm. * User-friendly and provides easy access to the cutting area. Ijdpfx Aljyy Iyrjxeif * Rigid, monoblock, welded steel body and robust machine structure, thermally stress-relieved. * Aluminum gantry design for increased rigidity and high dynamic performance. * Energy-saving with low power consumption. * Remote service capability. * Automatic lubrication system. * Customized production available according to specific client requirements, as both design and manufacturing are carried out in-house.

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: EDGE 1500 X 3000 / 1500 X 4000, control type: CNC control, laser type: fiber laser, laser source manufacturer: RAYCUS - MAXPHOTONICS - IPG, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, * Raycus, MaxPhotonics and IPG resonators. * Raytools, Precitec, and Bochu laser cutting heads. * LYNCA/CYBELEC, Eurosoft, ESA CNC. * High user convenience with a 21.5'' touchscreen display. * Occupies 40% less floor space compared to a conventional fiber laser cutting machine. * Easy and cost-effective transportation. * CE conformity. * Features a compact design and a transverse removable cutting table. * Can be equipped with fiber laser sources ranging from 2kW to 6kW. * Working range: 1,500mm x 3,000mm and 1,500mm x 4,000mm. Iiedeyyxpqjpfx Alxof * User-friendly, with easy access to the cutting area. * Thermally treated, robust, monoblock welded steel frame for enhanced rigidity. * Aluminum bridge design provides increased strength and high dynamic performance. * Energy saving through low power consumption. * Remote service capability. * Automatic lubrication system. * Production according to customers’ special requirements, as both design and manufacturing are carried out in-house.

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: MASTER PLUS (Müşteriye Özel Ölçüler), control type: CNC control, laser type: fiber laser, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, safety light barrier, * MASTER PLUS is a high-capacity, technologically advanced fiber laser cutting machine primarily used for cutting large metal sheets. It is capable of processing long, wide, and various materials in a single operation. For materials of variable sizes, it allows for flexible operation by creating continuous, uninterrupted, and independent cutting zones at different points of the machine. Enables higher production speeds and increased efficiency when processing large-volume materials, leading to significant savings in time and labor. * Single table, fixed cutting bed. * Customizable, available with a wide range of cutting areas. * Equipped with Raycus, MaxPhotonics, and IPG resonators. * Features Raytools, Precitec, and Bochu laser cutting heads. * LYNCA/CYBELEC, Eurosoft, ESA CNC systems. * 21.5'' touch screen for easy operation. * CE-compliant. * Configurable with fiber laser sources from 2kW up to 30kW. Iisdpfx Asyy Nrvolxjf * Bevel cutting option available. * User-friendly design, easy access to the cutting area. * Thermally processed, robust monoblock welded steel frame for enhanced structural integrity. * Aluminum bridge design provides higher resistance and dynamic performance. * Energy saving through low power consumption. * Remote service capability. * Automatic lubrication system. * Since both design and manufacturing are done in-house, custom production is available according to customer requirements.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, operating hours: 21,713 h, machine/vehicle number: 007, laser power: 4,000 W, sheet thickness steel (max.): 12 mm, sheet thickness stainless steel (max.): 10 mm, sheet thickness aluminum (max.): 8 mm, travel distance X-axis: 2,520 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 300 mm, No minimum price – guaranteed sale to the highest bidder! The machine was serviced annually (most recently in December 2025) – service records are available. The Laser Turbo-Blower was replaced in 2021. The X-axis and Y-axis were renewed in 2023 with 27,066 operating hours. TECHNICAL DETAILS Travel range X-axis: 2,520 mm Travel range Y-axis: 1,550 mm Travel range Z-axis: 300 mm Travel range B-axis: 17 mm Cutting capacity normal steel: max. 12 mm Cutting capacity stainless steel: max. 10 mm Cutting capacity aluminum: max. 8 mm Laser power: 4 kW Wavelength: 10.6 µm Laser beam diameter at the output of the laser resonator: 27 mm Cutting speed X-axis: 0 to 20 m/min Cutting speed Y-axis: 0 to 20 m/min Travel speed X-axis: max. 80 m/min Travel speed Y-axis: max. 80 m/min Travel speed Z-axis: max. 60 m/min Workpiece weight: max. 330 kg Material size: max. 1,500 × 5,000 mm Iedpfx Ajzrnhwjlxjif Table height: 820 mm MACHINE DETAILS Control system: AMNC-F (FS-160I LPB) Minimum unit: 0.001 mm Memory capacity: 10 MB Dimensions & Weight Machine dimensions (L × W × H): 5,745 × 2,630 × 2,151 mm Net weight: 7,700 kg Operating hours (according to the counter) Operating hours: 34,401 h Runtime: 21,713 h Cutting time: 11,111 h EQUIPMENT Loader and unloader Filtration system Manuals

Condition: new, machine/vehicle number: 10463, The AR series are slow-running machines. They are available with 2, 4, 6, or 8 screw shafts. Each screw unit is installed independently and separately in the chassis. Screw shredders are designed for the shredding of brittle materials (wood, paper, gypsum, mineral wool, etc.). The machines are largely insensitive to contaminants such as glass, metal parts, stones, etc. Ijdpfxoyr Ti Ij Alxsif The AR series is optimally suited for use as a bale opener, e.g., for PET bottle bales.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: COMPACT, The COMPACT model plasma cutting machine is a machine model that protects your budget through lower investment and reduced costs, prioritizing reliability, user-friendliness, and compactness as its three main principles. The Compact is a valid solution for the needs of a wide market segment, offering an excellent cost/benefit ratio for anyone dedicated to sheet metal processing. COMPACT is characterized by a monoblock design with a compact layout, making it easy to transport and suitable for medium and small workshops. This system is ideal for high-capacity plasma power sources. The system comes equipped with an extraction filter and plasma power source, and it can be configured with various CNC and software options depending on customer requirements. The Compact can feature a working range between 1,500mm x 3,000mm and 2,000mm x 6,000mm. Iodjyzm S Ajpfx Alxeif

Condition: used, Year of construction: 1998, functionality: fully functional, On offer: BIESSE ROVER 20 CNC machining center – 3 axes, working area 2893 × 950 mm. The machine is used, has undergone a comprehensive technical inspection and extensive service work, and is fully functional and ready for operation. It can be started and thoroughly inspected at our company's premises before purchase. The machine's greatest advantage is its extensive machining capabilities and the modernization of the electrical system and CNC control. The center features an ISO 30 electrospindle, a 10 + 6 spindle drilling head, and a saw unit, enabling milling, drilling, grooving, pocketing, and contour machining. Specifications: • Manufacturer: BIESSE • Model: ROVER 20 • Year of manufacture: 1998 • Number of axes: 3 • Working area X × Y: 2893 × 950 mm • 6 adjustable, pneumatically locking work beams • 12 vacuum cups • Pneumatic front and side stops • Main electrospindle: 3.6 kW, ISO 30 • Saw unit • Drilling head: 10 vertical + 6 horizontal spindles • New X/Y/Z axis servo drives: 3 × 1.0 kW • Vacuum pump: 3.0 kW Iedpfx Alezucbqsxsif • CNC controller: ESP32 • System: grblHAL / OpenBuilds CONTROL • Computer connection: USB • Dust extraction port: Ø200 mm • Total power: 9.6 kW • Overall dimensions: approx. 380 × 155 × 205 cm Service work performed: • Replacement of electrospindle bearings • Vacuum pump inspection and impeller replacement • Inspection of the pneumatic system and leak removal • Installation of 3 new X/Y/Z axis servo drives • New electrical system and CNC control installation Application: • Production of furniture, fronts, doors, and interior design elements • Machining of MDF, plywood, and furniture boards • Milling and contour machining • Vertical and horizontal drilling • Grooving and pocketing Additional information: • The machine does not require a dedicated computer – control is possible via a computer through USB • Currently operating on ESP32 with grblHAL and OpenBuilds CONTROL • It is possible to use a different CNC system, e.g., PikoCNC or UCCNC • Upon request, we can configure another system – the estimated cost of work is approximately PLN 4,000 + license, controller, and any components • Manufacturer's documentation in Italian • The photos show the actual condition of the machine offered • Free machine operation training at our company's premises • The price quoted in the auction applies to export/WDT sales with a VAT rate of 0%; in the case of domestic sales, 23% VAT will be added Financing and transport: • We organize transport using the MDD fleet or through external carriers • We assist in obtaining leasing or a leasing loan • The delivery cost depends on the destination and the method of machine transport.

Condition: good (used), Year of construction: 1970, functionality: fully functional, Data : Isdjzu Incepfx Alxeif Tip width 300 mm Tip height 150 mm External grinding spindle 4.0 kW Grinding wheel max. 400 x 80 x 127 mm Spindle cone MK4 Workpiece headstock 0.55 kW Workpiece speeds 30 - 450 rpm Internal grinding spindle 1.5 kW

Condition: not inspected (used), Year of construction: 1998, operating hours: 1,30,240 h, functionality: unexamined, machine/vehicle number: 34477, total length: 8,000 mm, total width: 2,200 mm, total height: 2,500 mm, overall weight: 21,000 kg, includes handling linear robot A used machine from a site closure is being sold. Ijdpjzrd Aqjfx Alxoif Sale is made excluding any warranty for defects. The machine has not been inspected but was in working order until the end.

Condition: new, Year of construction: 2026, -TFON Leveltech® Leveling Machine Series Iedpfx Ajhwb U Telxeif -Model: L-9060 -Material Thickness: 1.0 mm – 30.0 mm. -Maximum Material Width: 600 mm. -Minimum Material Length: 145 mm -Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled. Overload Protection: Standard Machine Weight: 26.000 kg. Machine Dimensions (L × W × H): 4,400 × 7,185 × 2,260 mm. Model: L-9011 Material Thickness: 1.0 mm – 30.0 mm Maximum Material Width: 1,100 mm. Minimum Material Length: 145 mm Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled. Overload Protection: Standard Machine Weight: 31.000 kg Machine Dimensions (L × W × H): 4,600 × 7,185 × 2,260 mm Model: L-9013 Material Thickness: 1.0 mm –30.0 mm Maximum Material Width: 1,300 mm Minimum Material Length: 145 mm. Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled Overload Protection: Standard Machine Weight: 35,000 kg Machine Dimensions (L × W × H): 5,000 × 7,185 × 2,260 mm Model: L-9016 Material Thickness: 1.0 mm –30.0 mm Maximum Material Width: 1,500 mm Minimum Material Length: 145 mm Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled. Overload Protection: Standard Machine Weight: 40.000 kg Machine Dimensions (L × W × H): 5,200 × 7,185 × 2,260 mm Model: L-9020 Material Thickness: 1.0 mm –30.0 mm Maximum Material Width: 2,000 mm Minimum Material Length: 145 mm Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled. Overload Protection: Standard. Machine Dimensions (L × W × H): 5,700 × 7,185 × 2,260 mm

Condition: new, Year of construction: 2026, *TFON Leveltech® Leveling Machine Series. -Models: M-5560, M-5511, M-5513, M-5516 -Engineered for precise leveling of materials with a thickness range from 1.0 mm to 15.0 mm, these models offer flexibility in material width and advanced control features for optimal performance. -Material Thickness: 1.0 mm – 15.0 mm -Maximum Material Width: M-5560: 600 mm M-5511: 1.100 mm M-5513: 1,300 mm M-5516: 1,500 mm Minimum Material Length: 110 mm Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled. Machine Weight: M-5560: 12.000 kg M-5511: 15.000 kg M-5513: 18,000 kg M-5516: 19.000 kg Machine Dimensions (L × W × H): M-5560: 2,800 × 2,905 × 1,950 mm M-5511: 3,300 × 2,905 × 1,950 mm. M-5513: 3,500 × 2,905 × 1,950 mm Iijdpfehwb Uwjx Alxef M-5516: 3,700 × 2,905 × 1,950 mm

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: J20M0260A, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, wire diameter (max.): 0.3 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 500 mm Travel range Y-axis: 350 mm Travel range Z-axis: 300 mm Travel range U/V: ±60 mm Workpiece size: max. 1,050 × 800 × 295 mm Workpiece weight: max. 1,500 kg Available wire diameters: 0.10–0.30 mm MACHINE DETAILS Dimensions & Weight Machine dimensions (L x W x H): 2,200 × 2,500 × 2,150 mm Machine weight: 3,700 kg EQUIPMENT Isdpfx Alezu N Abjxjif Automatic wire threading

Condition: refurbished (used), ROLLFORMING MACHINE PRODUCING SQUARE PROFILES WITH 5 TONES OF TOOLS Iisdpfjfgl Aqex Alxof MADE IN ITALY

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm Iisdpexdmgvofx Alxjf CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Year of construction: 2014, condition: excellent (used), Gainsborough Vertical Form & Seal Bagging Machine Ijdpfjuct Ivex Alxjif Continuous VVF Bagging Machine Complete with Markem-Inage SmartDate X40 Coder In Excellent Condition Has had very little use

Condition: ready for operation (used), Year of construction: 2018, operating hours: 13,072 h, functionality: fully functional, working width: 2,500 mm, No minimum price – guaranteed sale to the highest bidder! The machine is in very good overall condition, both visually and technically. No visible damage, corrosion, or significant wear and tear can be detected. Maintenance was carried out internally using SAP PM (electrical maintenance every 6 months, mechanical maintenance every 3 months). TECHNICAL DETAILS Material: Continuous corrugated cardboard Working width max.: 2,500 mm Minimum length: 200 mm Cardboard thickness: 2.57 mm Tool width: approx. 45 mm Longitudinal cutting accuracy: 0.2 mm Length tolerance: 1.5 mm/m Packaging size: 600 × 600 × 300 mm Performance: approx. 55 s/packaging unit Software and control (with 21" multi-touch panel and integrated control cabinet) PC: Beckhoff C6930 (Intel Core i5, 16 GB RAM, SSD) with Windows 10 IoT Enterprise Software: Beckhoff TwinCAT 3 Packaging design database: approx. 250 designs Production list control Dynamic tool management Multi-level waste optimization Bidirectional processing Remaining length monitoring Production data recording in CSV format Plain text error messages MACHINE DETAILS Operating hours: 13,072 h (in single-shift operation) Machine construction: Welded construction Multi-function tools for longitudinal processing: 6 Transverse processing tools: 1 Rubberized rollers: 2 Overpressure: segment-controlled Weight (according to nameplate): approx. 2,110 kg EQUIPMENT Automatic cardboard changer Iisdezu Akropfx Alxof Automatic selection of the optimal cardboard web width Two stations for cardboard webs Box designer programming software for customer-side workstations Creasing, scoring, perforating, and cutting according to the single-point principle Material-friendly creasing technology to prevent the cardboard from flaking Perforation using an oscillating knife with adjustable perforation level Cutting using a toothed knife on a rubberized roller Clean, fiber-free cut edges Servo-motor adjustable tools Packaging designs Bottom/lid construction Bottom with corner locks for upright fixing of rims Lid according to FEFCO 0331 Suitable for the production of precisely fitting individual packaging for aluminum and forged wheels

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, rotational speed (max.): 2,500 rpm, swing diameter over bed slide: 470 mm, center width: 1,000 mm, TECHNICAL DETAILS Distance between centres: 1,000 mm Swing diameter over bed: 470 mm Spindle speed ranges 1: 50–270 rpm 2: 150–850 rpm Iedpfxjywg Rdj Alxeif 3: 450–2,500 rpm MACHINE DETAILS Electrical supply Mains voltage: 415 V Phases: 3 Frequency: 50 Hz Control voltage: 24 V Main motor power: 7.5 kW Main motor current draw: 13 A Auxiliary motor power: 0.173 kW Auxiliary motor current draw: 1.55 A Total motor power: 7.673 kW Total current draw: 14.55 A

Condition: not inspected (used), Year of construction: 2000, operating hours: 1,04,771 h, functionality: unexamined, machine/vehicle number: 42221, total length: 8,000 mm, total width: 2,200 mm, total height: 2,500 mm, overall weight: 21,000 kg, Includes linear robot. A used machine from a site closure is being sold. Sale is made with the exclusion of any warranty for defects. The machine has not been inspected but was operational until the end. Iodpfx Aszrdl Selxsif

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PLASMA CUTTING, Equipment: documentation/manual, The PROCUT model plasma cutting machine is designed to operate under all conditions. Its main advantage is a robust frame structure, making it suitable for heavy industrial use. Rails and frames are the most critical factors during the cutting process. They ensure that the machine remains stable and in good condition for a longer lifespan. It can be equipped with high-capacity power sources in sizes ranging from 1,500mm x 3,000mm up to 3,000mm x 12,000mm. All customer requirements can be integrated into the strong construction of PROCUT. This allows it to meet customer demands in the best possible way. Custom manufacturing in requested dimensions is possible, depending on your requirements and workspace. Ijdpfxeyzhl Dj Alxoif

Condition: good (used), Year of construction: 1992, functionality: limited functionality, machine/vehicle number: 1200, Hundegger P10 – Year of manufacture 1992 – partially modernized control system – good mechanical condition For sale: well-maintained Hundegger P10 cutting machine, year of manufacture 1992, with extensive equipment. Mechanical components in good condition, control system modernized (data import via USB drive, DOS conversion). 3 measuring scales are missing – price adjusted accordingly. The machine is currently still in operation and can be tested on site. Technical equipment: Swivel saw, notching milling cutter, rafter nail drilling unit, edger, blade milling cutter, horizontal and vertical drilling unit Iiedpezu Anwefx Alxef Three-sided notching tool, vertical milling cutter, finger cutter, panel cutter, ejector and transverse conveyor.

Condition: used, Year of construction: 1995, functionality: fully functional, Equipment: documentation/manual, HAMOS KWS 1010-0 – complete electrostatic separation line We are selling a complete HAMOS KWS 1010-0 electrostatic separation line, including dust extraction, conveyors, hoppers, vibrating screens, and other accessories. The equipment is designed for dry electrostatic separation of conductive and non-conductive materials, particularly for separating metals from plastics and other non-conductive materials. It is suitable, for example, for processing plastic mixtures, cable waste, electronic waste, and other mixtures containing conductive and non-conductive components. The complete line includes: * electrostatic separator HAMOS KWS 1010-0 * dust extraction and filtration unit IGM PFLUX * large input hopper for material / big bag * conveyor for transporting material to the separation line * large vibrating screen * small vibrating screen * replaceable screens for preparing the desired 1 mm and 2 mm fraction * frame, hoppers, and other line accessories Material handling The large input hopper is designed so that it can be removed from the frame and transported to the desired location using a forklift. This allows the material from the big bag to be emptied into the hopper outside the line itself, and then the hopper can be placed back on the frame. From there, the material is transported to the next part of the process. HAMOS service and modernization The separator itself underwent service and modernization work directly at the HAMOS manufacturer in 2024. As part of these works, the following were carried out, among other things: * new dust extraction solution * electrode cleaning adjustment * installation of a new control unit * other service and refurbishment work The line is available immediately. Iiodpfx Aozvgm Hslxef We prefer to sell the complete technology.

Condition: ready for operation (used), Year of construction: 1965, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,150 mm, spindle speed (max.): 6,000 rpm, table load: 6,000 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Iiedpfx Aozuzpaslxof Travel range, X-axis: 1,600 mm Travel range, Y-axis: 1,200 mm Travel range, Z-axis: 1,150 mm Spindle speed: 20–6,000 rpm Work table: 1,200 × 1,400 mm Table load: max. 6 t Please note the following: The height and weight of the asset must be taken into account when selecting the transport vehicle. There is no loading dock on site. However, a forklift or an overhead crane is available for loading. If the asset is not collected on time, a storage fee of €20.00 per lot and per day (or part thereof) will be charged. The fee must be paid before collection. The sale is made without any warranty or guarantee. The information on the technical data is based on the original offer. No liability is accepted for typographical or measurement errors. In case of doubt, please compare the information with the provided photos or inspect the item on site before the auction ends.

Condition: good (used), Year of construction: 1980, Info: The machine was installed in a pit! - Pulling force: max. 25,000 kg - Stroke height: max. 630 mm - Working speed: 1 - 10 m/min - Return speed: 7 - 25 m/min - Total power requirement: 45 kW - Machine weight: 5,500 kg Transport and loading can be organised across Europe upon request and for an additional charge. Prices are subject to VAT. Inspection possible by appointment. Please contact us—our team is happy to assist you. Machinery Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS & MORE. Isdpozvfpmsfx Alxeif Are you looking for a high-quality yet affordable machine for your production? Or would you like to sell yours? For further information or contact options, you can reach us via the contact form.