Used Pet Blowing Machine for sale (65,606)

Condition: used, Stretch blow molding machine by Etek ISBM line = Injection stretch blow molding Stretch blow molding machine for single-use PET bottles made from PET preforms Stretch blow molding machine for production using the rotary process Manufacturer: ETEK / GF-Industries, Type Supra 800 sv 1 Bjdpfx Anskucxljdjdi Serial number: 22000225 Year of manufacture: 2012 Power: 90 kW Mains connection: 400 volts, 50 Hz Weight: approximately 6000 kg In like-new condition

Condition: excellent (used), Year of construction: 2003, PET bottle blowing machine Manufacturer: KRONES Model: CONTIFORM K781 Efficiency: 12,000 bph Includes 1.5 L and 0.5 L bottle molds Power: 150 kW Air requirement: 10 bar - 1500 m3/h, 30 bar - 1000 m3/h Set dimensions (blow mold + preform feeder): 1100 x 340 cm, h: 450 cm Blow mold dimensions: 500 x 340 cm, h: 250 cm Feeder dimensions: 600 x 250 cm, h: 450 cm Air requirement: 10 bar - 1500 m3/h, 30 bar - 1000 m3/h Year of production: 2003 Technical documentation of machine operation Very good condition Bdjdsvddkvopfx Andoi

Condition: used, Year of construction: 1998, Automatic PET bottle blowing machine Bjdpfx Anoutni Rodjdi Manufacturer: SIDEL Type: SBO 16/16 S1 Year of manufacture 1998 Capacity: 16,000 for 1.5 L bottles and up to 19,000 bph for 0.5 L bottles Installed power: 347 kW Includes 1.5 L moulds Preform feeder Chiller cooling unit Technical condition: used machine, functional until dismantled. The machine is currently dismantled, assembled in elements and prepared for transport. Full and original technical documentation.

Condition: used, Year of construction: 1992, Automatic PET bottle blowing machine Manufacturer: SIDEL Bdodpfx Answa Rhrodoi Type: SBO 4 S1 Year of prod. 1992 Capacity: 4,000 for 1.5 L / 2 L bottles Installed power: 150 kW Includes 1.5 L molds Preform feeder Technical condition: used machine, starts up, program is functional

Condition: used, Year of construction: 1999, - PET-Blow moulding machine, make Sidel, type: SBO 16 with preform tipper, preform feed, unscrambler, preform transport, built 1999, already dismantled, ex location for sale. Bdjdpfx Ansrazwrsdei - PET-Blow moulding machine, make Sidel, type: SBO 20, with preform tipper, preform feed, unscrambler, preform transport, built 1999, already dismantled, ex location for sale.

Condition: used, Year of construction: 2006, Semi-automatic PET bottle machine – ZENTRONIK ZR-7 1. Heating oven for PET preform heating 2. Semi-automatic PET bottle production machine Mould: double-cavity for 5.0L bottles (48 mm cap) Output: approx. 800 bottles/hour Bdodpfownzdasx Andei Technical condition: used, operational

Condition: used, Year of construction: 2010, machine/vehicle number: SO146, Used SIDEL PET Blow molding machine - Year 2010Technical Specifications & Performance DataThis Sidel PET blow molding machine, model SBO10, is designed for the rotary stretch-blow molding of PET bottles from preforms. Manufactured in 2010, the machine is configured with 10 cavities and has a stated production capacity of 14,000 bph. The Ø28 1881 neck finish is specified for the installed mold and preform configuration.Manufacturer: SidelModel: SBO10Year: 2010Production capacity: 14,000 bphNumber of cavities: 10Preform neck finish: Ø28 1881Blower footprint: 8,900 mm length x 3,200 mm widthInstalled power: 306 kWMain electrical supply: 3 x 400 V, 50/60 HzMaximum current: 452 AAdvanced Automation & Control SystemsThe machine operates from a 3 x 400 V electrical supply and is specified for 50/60 Hz operation. A 24 V remote-control circuit is indicated. Its electrical installation includes a short-circuit rating of 25 kA RMS symmetrical, supporting integration into an appropriately designed industrial electrical system.The rotary PET blow molding process is suited to automated preform handling, bottle formation and discharge to downstream bottling equipment. The supplied preform handling equipment includes an elevator column, mini-hopper assembly and main hopper/feeder.Production Line Integration CapabilitiesThis PET bottle blower can serve as the bottle-forming stage of a used bottling line for beverage production and industrial packaging. It can be integrated with preform supply equipment upstream and with air conveyors, filling monoblocks, labeling machines, shrink wrappers and palletizing systems downstream.The supplied equipment list includes a Sidel EBH 2050 PET preform press manufactured in 2010 and a Sidel-Alsim air conveyor manufactured in 1999. The air conveyor supports transfer of newly formed PET bottles toward subsequent packaging machinery.Preform elevator column: 5,200 mm length x 1,300 mm width x 1,200 mm height; 250 kgMini-hopper assembly: 2,900 mm length x 1,630 mm width x 1,160 mm height; 367 kgMain hopper/feeder: 2,590 mm length x 1,850 mm widthMachine Condition & Maintenance HistoryThe machine is presented as a second hand Sidel PET blow molding machine with identified year, model, output and electrical data. Buyers can use the stated configuration and associated handling equipment details when planning inspection, recommissioning and integration into a PET bottling or industrial packaging production line.Operational Performance & VersatilityThe SBO10 is designed to convert PET preforms into finished PET bottles through a rotary stretch-blow molding process. Its 10-cavity arrangement supports continuous bottle production at the stated output. The specified Ø28 1881 neck finish identifies the available preform and bottle-neck configuration.As part of beverage production equipment, a PET blow molding machine typically supplies e... Bodpfoz E Dfiex Andedi

Condition: good (used), Year of construction: 1998, operating hours: 89,340 h, functionality: fully functional, screw diameter: 90 mm, overall weight: 16,000 kg, clamping force: 650 kN, total width: 2,750 mm, total length: 5,600 mm, total height: 3,200 mm, Manufacturer: Sterling Model: 15 LBS Year of manufacture: 1998 Operating hours: 89,340 h Closing force: 650 kN Screw diameter: 90 mm Bodpezfxwiofx Andsdi BM Sterling APV, year of manufacture 1998 Complete control system replacement in 2008 with MACO-sys 6000, carried out by Davies-Standard LTD PRICE REDUCTION OF 30%!!! Net price: from 45,000 EUR to 31,500 EUR!!!

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Equipment: documentation/manual, For sale: Complete PET bottle blowing line TES BluLine4 HiTech MultiFlex (2017) We offer for sale a complete PET bottle production line from the renowned manufacturer TES Sp. z o.o., model BluLine4 HiTech MultiFlex, manufactured in 2017. The machine is in very good technical condition, regularly used, and ready for further operation. Technical data Manufacturer: TES Sp. z o.o. Model: BluLine4 HiTech MultiFlex Year of manufacture: 2017 Bottle capacity range: 0.5 l – 4 l Number of cavities: 2-4 The line includes: ✅ Preform feeder ✅ PET bottle blowing machine ✅ Bottle packer for trays Advantages of the equipment Complete and ready-to-use production line Universal range of produced capacities Bdedpfx Aszd Sb Ssndsi Solid construction and proven TES technology Very good technical condition Ideal for manufacturers of beverages, water, household chemicals, and other products packaged in PET bottles Price: negotiable. If you have any questions or would like to obtain additional information, please contact us by phone or private message. We will gladly provide detailed information and send additional photos of the equipment.

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, year of last overhaul: 2024, compressed air connection: 10 bar, We offer 2 HUSKY machines. Available technical specifications for the HUSKY 2 machine, produced on 18/12/24, 23.5 GR, as per the listed data: Model: GL 6L 300 PET Type: P 100/120 E100 Series: 3.0 TONNE Hydraulic pressure: 180 BAR Weight: 57,800 kg Number: 14065 Date: 98/02/04 Encore Husky Package 20 Serial Number: 54360P Code: S2PP-N01 Reference Number: 726698 Year: 3123-64 Additional Information: Hot Runner and Mold Weight: 2315 gr (72) CAV MOLD 48 gr 2 lit. 28 gr 0.5 lit. HOT RUNNER 48 CAV MAAI 48 CAV MAAI 48 CAV Bedpfjy Tpfiox Andedi KOBOTS / ROBOTS 48 – 1.4 – 27 gr 28 gr Available technical specifications for the HUSKY 1 machine, produced on 29/11/24, 10.5 GR, as per the listed data: HUSKY 1 type P100/120 E100 14/04/1998 SERIES 300 TONNER HYD. PRESSURE: 180 BAR WEIGHT: 21,600 kg Material / Specifications NOVTCO GL300 PET P 100/120 E100 3L Dates DATE: 14/3/14 DATE: 98/04/14 Details AW 5830-A01 72698 E. 3293-111 Remarks ENCORE HUSKY EXTENSION (2)T AP PERIOD 543588 HOT RUNNER AND MOLD 1QTS 92 (F2) WATER CAVITY The machines come with many spare parts and molds, as well as all auxiliary production machines, such as a plastic preform production or PET packaging line: The resin is stored in hoppers. It is dried using a dryer/dehumidifier. It is transferred to the Husky machine via vacuum pumps. The injection molding machine produces the preforms. The water circuit cools the molds and robots. There are filters, metal detectors, and conveyors for material and scrap management. The two lines are almost identical, with separate equipment for each line (No1 and No2). Code Description Function HUSKY Husky Machine Injection molding machine DRYER Dryer Drying of plastic resin FAN Fan Air circulation / cooling CONVEYING RESIN TO HOPPER Resin Transfer Transfer of raw material to hopper VACUUM PUMP Vacuum Pump Creating a vacuum for material transfer WATER PUMP Water Pump Circulation of cooling water DEHUMIDIFIER Dehumidifier Removal of moisture from air/resin RESIN HOPPER Resin Hopper Storage and feeding of material COMPRESSOR Compressor Supply of compressed air AIR TANK Air Tank Storage of compressed air WATER FILTER Water Filter Filtering of cooling circuit METAL DETECTOR Metal Detector Checking material for metal objects PLASTIC SYSTEM CONVEYOR Plastic System Conveyor Transfer of product/material PREFORM BREAKER Preform Breaker Breaking of rejected preforms STRAP Strapping Machine Binding of packaging OVERHEAD CRANE Overhead Crane Lifting loads

Condition: used, Year of construction: 2016, machine/vehicle number: SO125, Used Blow Molding Machine Terekas up to 5L 1000 bph This used blow molding machine from Terekas, model FlexBlow 1, is designed for demanding PET bottle production, offering advanced flexibility and efficiency. With a maximum bottle capacity of up to 5 liters and a throughput of up to 1,000 bottles per hour, the system is engineered for operations that require consistent product quality across multiple neck finishes and formats. The FlexBlow 1 utilizes a linear blow molding architecture, equipped with a single cavity, making it ideal for short production runs, frequent changeovers, or pilot lines. It integrates seamlessly into existing filling and packaging lines, thanks to its modular design and compatibility with multiple container types. The preform feed system includes a tipper, unscrambler, and loader, all designed to ensure reliable, jam-free supply of preforms into the production cycle. The core of the process begins with a robust preform heating tunnel, employing infrared (IR) lamps enclosed within a secure, ventilated housing. Preforms are conveyed through the heating zone by an articulated chain system, which ensures precise and uniform exposure to the heat source. The IR heating zone is shielded by a protective grid, preventing accidental contact while maintaining optimal thermal consistency across the preforms. The tunnel design avoids excessive hot spots or thermal degradation of the preform, contributing to higher end-product quality and reduced scrap rates. Precise Control and Reliable Operation After exiting the heating tunnel, preforms are transferred automatically into the blow molding station. The FlexBlow 1’s single-cavity blow unit utilizes high-efficiency pneumatic actuators and robust mold clamping mechanisms to produce containers up to 5 liters in volume. This configuration allows for rapid cycling and excellent pressure control throughout the stretch-blow sequence. The complete air handling system is engineered for reliability, with integrated air recovery to optimize compressed air consumption and reduce overall utility costs. Critical to the system’s operation is the dedicated chiller, which ensures mold cooling circuits remain within the required temperature range, guaranteeing consistent bottle wall thickness and minimizing cycle times. All pneumatic and hydraulic components are mounted in a well-organized auxiliary area, with clearly labeled connections for maintenance and diagnostics. Filtration and lubrication points are readily accessible, supporting a high level of system uptime and minimizing unscheduled stops. Bjdj Adyymopfx Andedi Machine operation and process parameters are managed through a touchscreen HMI panel installed directly on the electrical cabinet. This interface provides real-time control over all production settings, alarm management, and maintenance prompts. The entire machine is wired in a highly organized manner, with secured electrical panels, neatly routed cables, and clearly identified terminals for ease of troubleshooting. All safety guards and interlocks are present and functional, ensuring the operator’s safety while maintaining access...

Condition: used, Set of machines for the production of beverages in 5-liter PET bottles. 1) RIVI 24 carousel filling machine - machine modernized in 2013 - previously used for 1.5 L bottles (24 fillers) - number of filling heads: 12 pcs (for 5 L bottles) - capacity: approx. 1800 bph 5 L 2) ZALKIN 4 PET bottle capper - number of closing heads: 4 pcs - capacity: approx. 2000 bph Bodsu I N Npjpfx Andsdi Used machines, functional at the time of dismantling. Complete original technical documentation. Other offers also include semi-automatic blow molding machines for 5 L PET bottles, compressors and bottle labelers. .

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 271/1, overall weight: 700 kg, Semi-automatic PET bottle blowing machine for producing 5-gallon PET bottles. Includes heating and blowing unit. Bsdpezd Tduefx Andedi Supplied with 2 sets of 5-gallon blowing molds. Capacity: 60 bottles/hour.

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, product height (max.): 380 mm, workpiece diameter (max.): 130 mm, production capacity: 7,200 unit/h, TECHNICAL DETAILS Number of cavities: 6 Capacity with standard bottles: up to 7,200 bph Product formats Bdodpfx Ajx A Uu Eendsi Bottle volume: 0.25 – 3.0 L Max. bottle height: 380 mm Max. bottle diameter: 130 mm Preform dimensions Max. preform length: 210 mm Neck inner diameter: 34 mm MACHINE DETAILS Dimensions & Weight Blow module dimensions: 2,000 x 2,200 x 2,200 mm Blow module weight: 8,000 kg Oven dimensions: 3,000 x 1,100 x 2,100 mm Oven weight: 2,000 kg Control cabinet dimensions: 1,500 x 1,000 x 2,100 mm Control cabinet weight: 1,000 kg Transformer 415V / 380V dimensions: 1,000 x 500 x 2,000 mm Transformer weight: 500 kg Preform hopper and conveyor dimensions: 3,000 x 1,500 x 3,500 mm Preform hopper and conveyor weight: 600 kg Preform feeder dimensions: 2,000 x 2,500 mm Preform feeder weight: 250 kg Infeed guide rail length: 2,000 mm Power supply Total power: 142 kW Mains connection: 380/420 V +/- 10%, 50 Hz +/- 1% Cooling water Cooling capacity: 16,000 kcal/h Water temperature: 10 – 12°C Flow rate: up to 6.0 m³/h Water pressure: 5 – 6 bar Compressed air Service air pressure: 7 bar Service air flow: 50 – 100 Nm³/h Blowing air pressure: up to 35 bar Blowing air flow for 0.25 – 3.0 L: 155 – 770 Nm³/h EQUIPMENT Transformer 415V / 380V Preform hopper and conveyor Preform feeder Infeed guides Adaptation to other voltages possible

Condition: used, Year of construction: 2010, machine/vehicle number: PR29, Used AOKI SBIII-250LS-50 blow molding machine - Year 2010Technical Specifications & Performance DataUsed AOKI SBIII-250LS-50 blow molding machine for industrial packaging and PET container production. This machine is designed to form bottles from preforms, supporting efficient bottle manufacturing as part of a used bottling line or an independent container production operation.Manufacturer: AOKI TECHNICAL LABORATORY, INC.Model: SBIII-250LS-50Year of manufacture: 2010Electrical supply: 3-phase AC, 220 V, 60 HzInstalled power: 50.2 kWCurrent: 165 AMachine weight: 10,400 kgHydraulic pressure: 14.0 MPaPneumatic pressure: 3.0 MPaWater supply pressure: 0.3 MPaAdvanced Automation & Control SystemsThe AOKI SBIII-250LS-50 operates on a 3-phase AC electrical supply rated at 220 V and 60 Hz. Its 50.2 kW power requirement and 165 A current rating should be considered when planning electrical distribution, protection devices and control-panel connection. Blow molding machines of this type are intended for repeatable preform processing and controlled bottle forming in industrial packaging environments.The machine uses hydraulic, pneumatic and water services as part of its operating configuration. These utilities support the forming process and should be connected through suitably rated site installations.Production Line Integration CapabilitiesThis AOKI blow molding machine can operate as the bottle production stage of a PET beverage production line. It is typically installed upstream of downstream bottling equipment such as rinsing, filling, capping, labeling, secondary packaging and palletizing systems. Bottle transfer, accumulation and conveyor interfaces should be matched to the required production layout.As a second hand machine for industrial packaging, it can support PET bottle supply for beverage production and other packaging operations where preforms are converted into finished containers before filling.Machine Condition & Maintenance HistoryThe machine is identified as used and is offered as a blow molding machine manufactured in 2010. Its substantial 10,400 kg construction indicates a stationary industrial installation requiring appropriate handling equipment during loading, positioning and commissioning.Routine commissioning should include inspection of electrical connections, hydraulic circuits, pneumatic supply lines, water supply connections and all machine safety systems before production use.Operational Performance & VersatilityThe SBIII-250LS-50 is intended for PET bottle manufacturing from preforms. In a bottling equipment configuration, a blow molder provides the container supply stage ahead of filling and packaging operations, helping coordinate bottle availability with the production line’s filling demand.Its utility requirements include hydraulic pressure of 14.0 MPa, pneumatic pressure of 3.0 MPa and water supply pressure of 0.3 MPa. Stable utility conditions are important for consistent machine operation in a PET packaging process.Install... Bdjds Adttgjpfx Andoi

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: K787016, overall weight: 41,000 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 800 A, operating pressure: 40 bar, control voltage: 24 V, type of input current: three-phase, Equipment: documentation/manual, Krones Contiform S20 PET stretch blow molding machine – 20 cavities, output up to 40,000 units per hour. Used Krones Contiform S20 machine for manufacturing PET bottles. The machine is completely disassembled and prepared for loading onto a truck. Due to its disassembled condition, it is not possible to perform a test run or functional tests – it is sold as a complete set of components for reassembly by the buyer. Technical specifications: • Manufacturer: Krones • Model / Year: Contiform S20 / [2003] • Number of cavities: 20 Bodpfsz Euubex Andodi • Nominal output (according to the manufacturer's specifications): up to 40,000 bottles/hour • Maximum container volume: up to 3 l (depending on the shape) • Oven: linear, with a 40 mm stroke • Neck size: 26/22 (PCO 1881) Scope of supply: [preform feeder, hopper/elevator and orienting device, chiller, molds, spare parts, etc.] Inspection possible by prior arrangement – the machine can be inspected in its disassembled state, with the components laid out in Kutno. Loading at the buyer's expense. Transport to be agreed. Price on request.

Condition: good (used), Year of construction: 1994, functionality: fully functional, Manufacturer: s.p.a magic m.p. Bsdpfx Asxxp Tbsndedi Type: MGL2D This blow molding machine is in full working order. It is still in production and can be inspected after scheduling an appointment. Upon request, I can also send videos. PRICE REDUCTION OF 30%! PRICE: REDUCED FROM 19,000 TO 13,300 EUR!

Condition: like new (used), functionality: fully functional, machine/vehicle number: SBO 6/10, Sidel Stretch Blow Moulding Machine Max. output: 6.000 bottles/hour. Max. bottle size: 3.000 cc. Blow stations: 6. Machine is in very good conditioning and well maintained. GENERAL INFORMATION The SBO 6/10 has 6 molds and 10 heating modules. Will work with a wide range of bottle sizes and styles from 0.25 to 3 liters. Sidel 2-step ^PET stretch-blow molders require previously manufactured preforms be supplied to the machine. Separating the bottle manufacturing and preform manufacturing processes allow production to be optimized, provide greater flexibility of operation and use, and provide higher production output rates and yield. MAXIMUM PREFORM DIMENSIONS Neck height 9 – 41 mm (measured from bottom of support ring) Minimum inside diameter of neck 19 mm Maximum outside diameter of neck 34 mm Preform support ring diameter 29 – 51 mm Maximum preform length 210 mm MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter 130 mm Maximum bottle height 380 mm Bottle capacity 0.25 – 3 liters AVERAGE PREFORM WEIGHTS (non carbonated and carbonated liquids) 0.25 liter bottle 14-20 grams 0.50 liter bottle 20-33 grams 1.00 liter bottle 26-40 grams 1.50 liter bottle 35-51 grams 2.00 liter bottle 44-58 grams 3.00 liter bottle 68-84 grams BLOW WHEEL Height 3.5 meters Number of molds 6 Closing force 10 tons Item height (under neck) at outfeed 1.4 meters approximately Machine DC drive motor power 4 KW HEAT CONDITIONING Height 2 meters Number of oven heating units 10 Number of heating zones per unit 8 Maximum power 170 KW ELECTRICAL USAGE Maximum supplied power 200 KW Average consumption 100-150 KW/hr (varies per bottle being produced) COMPRESSED AIR Supplied power from 7-35 bar Pressure 7 bar Flow rate 50-100 Nm3/hr (varies per bottle being produced) Blow pressure – champagne base up to 25 bar Blow flow rate – champagne base 110-550 Nm3/hr Blow pressure – petaloid base up to 35 bar Blow flow rate – petaloid base 155-770 Nm3/hr CHILLED WATER Temperature 10-12 degrees Centigrade Pressure 5-6 bar Flow rate up to 6 cubic meters/hour Kcal to be removed up to 16,000 Kcal/hour WEIGHT Bsdpfx Asg Ailcondjdi Blow wheel with molds 8 tons Heat conditioning unit 2.2 tons Preform feeder 0.65 tons Electrical cabinet 0.85 tons PREFORM HEAT CONDITONING The preforms are transferred neck up to the heat conditioning device. This unit continuously insures the preforms are inverted before passing, neck down, in front of the heating units and then inverts them again. During the heating phase, the preforms are rotated and their necks protected from the heat in order to optimize the distribution of heat without deforming the neck. Heating is insured by 10 heat modules. Each unit can accommodate up to 8 infrared lamps stacked horizontally whose ends are air cooled. The heating power of 8 zones, corresponding to the 8 rows of lamps, can be controlled in order to optimize the heat profile. These zones are regulated on all SBO Models. After heating, a control by infra-red camera of preform temperature enables regulation of the zones under control, thus insuring maintenance of the required temperature.

Condition: good (used), Year of construction: 2017, functionality: fully functional, LINEAR PET BLOWING MACHINE SET with auxiliary equipment AC ARCOR - multiBlow2 - 2017 Speed: 1,5L - 6000 Cavities: 4 Formats: 0,1 - 3,0L AUXILARY EQUIP Bdedpequuvrofx Andoi 1. Chiller - M.T.A S.p.A - TAE EVO 051 2. LOW Pressure compressor - SHAMAL 45kw 3. Receiver tank - Low pressure - MAX 16Bar 4. Receiver tank - High pressure - MAX 45Bar

Condition: used, Year of construction: 2008, machine/vehicle number: SO145, Used PLASTIBLOW PB1H-D blow molding machine for HDPE - Year 2008Technical Specifications & Performance DataThe Plastiblow PB1H/D is a used industrial blow molding machine designed for producing plastic bottles through extrusion blow molding. Built in 2008, this double-carriage machine is configured with a single extrusion head and is suitable for manufacturing two 1.0L bottles simultaneously. It is a practical solution for manufacturers seeking second hand industrial packaging equipment for bottle production.Manufacturer: PlastiblowModel: PB1H/DYear: 2008Speed: 1L format 600/700 bottles/hour ( 2 cavity mold)Configuration: Double carriage, single headProduction configuration: 2 bottles of 1.0L produced simultaneouslyElectrical supply: 400V, 50HzExtruder configuration marking: E50/26Conformity marking: CEAdvanced Automation & Control SystemsThe machine is equipped for operation on a 400V, 50Hz electrical supply. Its double-carriage arrangement supports alternating mold movements during the blow molding cycle, helping organize bottle production around the molding process. The single-head layout is intended for a two-bottle 1.0L production configuration.For a used bottling line or dedicated plastic packaging installation, the machine should be integrated with suitable electrical protection, process controls and operator-access safeguards appropriate to the final production environment.Production Line Integration CapabilitiesThis Plastiblow blow molding machine can serve as the bottle-production stage of a PET or plastic container packaging system, depending on the material and tooling installed. It can be positioned upstream of downstream bottling equipment such as rinsing, filling, capping, labeling and secondary packaging machinery.The double-carriage configuration is suited to installations requiring a compact bottle manufacturing process before beverage production or other industrial packaging operations. Mold selection, neck finish, bottle geometry and resin compatibility should be matched to the required container specification and the downstream filling line.Machine Condition & Maintenance HistoryThis 2008 Plastiblow PB1H/D blow molding machine is presented as ready for operation. The available identification data confirms the machine model, electrical supply and CE marking. Before commissioning, routine inspection of the extrusion system, molds, cooling circuits, pneumatic equipment, safety devices and electrical components is recommended as part of normal installation and startup procedures for second hand machinery.Operational Performance & VersatilityThe PB1H/D is configured to make two 1.0L bottles at the same time using a single extrusion head and double carriage. This arrangement supports repeatable production of matched bottle formats where a two-cavity mold configuration is required.Blow molding equipment of this type forms hollow plastic containers for use across industrial packaging applications. Final production capability depends on the installed mold set, extrusion tooling, resin, process settings... Bedpsz E Dfpsfx Andsdi

Condition: good (used), Garmak carpet washing machine. Bjdpez Spz Djfx Andsdi Capacity: 500 m2 per day. Width: 365 cm, depth: 290 cm.

Condition: used, Year of construction: 2019, Petratto DP66 Pressing Machine, used The Petratto DP66 is a professional pressing machine specifically designed for use in print finishing. It impresses with its robust construction, modern controls, and high flexibility when processing various paper formats and thicknesses. The machine is ideal for print shops and bookbinderies that value precision, reliability, and efficiency. Key Features - Robust industrial design for continuous operation - Easy operation via a clear control panel with emergency stop, start/stop, and program selection buttons - Digital control with display for precise settings and programming - Flexible feeder for various paper formats and thicknesses - Safety features such as emergency stop switch and protective covers - 400V connection for powerful operation - Year of manufacture 2019, ensuring modern technology and current safety standards Technical Specifications - Manufacturer: Petratto Srl, Italy - Model: DP66 - Type: 66 - Year of manufacture: 2019 - Power supply: 400 V - Control panel: Digital, programmable - Safety equipment: Emergency stop, protective covers - Application: Pressing tasks, further processing of paper Bdedsw Evd Aspfx Andei All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: ready for operation (used), COMPLETE KRONES PET BOTTLES ASEPTIC FILLING LINE FOR FRUIT JUICE/BEVERAGES AND SPRITZERS. SUITABLE FOR STILL AND CARBONATED PRODUCTS. YOM 2002-2007 CAPACITY: 0,5L x 36.000 BPH 1,0L x 30.240 BPH 1,5L x 25.200 BPH BOTTLE CLOSURES 28mm. THE LINE INCLUDES BOTTLE BLOWING, FILLING, LABELING, PACKAGING AND PALLETIZING: 1. Control unit: Ruland 2002, touchscreen, flash heating & CIP/SIP 2. Pasteur: Ruland 2002, tube heat exchanger, 1315 L supply tank, max. 21,800 L/h 3. Sterile tank: Roth 2002, 11,000 L 4. Carbonization: Roth/Ruland 2002, 2575 L, disconnected 5. Nitrogen system: Terboven/ISTE 2002 6. Hygienic center: Ecolab/Lang 2002, CAF, no PLC 7. Sterile water system: Roth/Ruland 2002, 9,000 L/h, buffer 2575 L 8. Sterile water system: Roth/Ruland 2002, 9,000 L/h, buffer 2575 L 9. CIP/SIP: Ruland 2002, 20,000 L/h, 1315 L supply tank Bedpoxm Rwqsfx Andjdi 10. Cleanroom: Weiss 2002, ventilation/overpressure 11. Preform hopper: Dieterle 2002, MD3 12. Preform feeding: Tanner 2002, HFT 4730 / RGT 1624 13. Blow molding: Krones Contiform S16 2002, 16 stations, 1.0–20,000 b/h 14. Air conveyor: Krones 2002, automatic rail adjustment 15. Cap conveyor: Gassner 2002, 2 container positions, cap elevator 16–18. Filling machine: Krones CAF VODM 100 2002, injector (60), rinser (80), filler (100), capper (20), 1,0–20.000 b/h, 28 mm caps, still/carbonated 19. Label check: Krones 2002, incl. in Prontomodul 20. Bottle check: Krones 2002 21. Conveyor: Krones 2002, air blower before labeling 22. Labeling machine: Krones Prontomodul 2007, max. 35.600 b/h 23. Canmatic module: Krones 2007, paper labels 24. Contriroll module: Krones 2007, film roll 25. MHD coding: Videojet Excel/170i 26. Shrink wrapper: Krones Variopak 2002, 0.5–36,000 b/h, carton feeder & film transport 27. Packaging conveyor: Krones 2002 28. Handle applicator: Twinpack MHTE 2002 29. Empty pallet magazine: Krones LPM 2002 30. Palletizing: Krones robot 3A loader 2002, 4,000 packages/h 31. Pallet conveyor: Krones 2002, transfer cart & turner 32. Empty pallet magazine: Krones LPM 2002 33/34. Pallet stretch wrappers: Franpak 2002, top sheet applicator 35. Tying machine: Bornbinder HB 2002 36. Pallet coding: Logopak EAN 128 2003 THE LINE IS STILL NOT DISMANTLING, EXCELLENT CONDITION. LOCATION - GERMANY.

Condition: used, Year of construction: 2001, machine/vehicle number: SO95, Technical Specifications & Performance Data The Sipa 8/4 is a compact, reliable Blow Molding Machine ideal for small-format PET bottle production within a used bottling line. Built for continuous duty in beverage production and industrial packaging environments, it combines proven mechanical design with essential utilities to support efficient operation. Manufacturer: Sipa Model: 8/4 Year of manufacture: 2001 Category: Blow Molding Machine Nominal output: up to 3,500 bph (bottles per hour) No. of cavities: 4 Bottle format: 0.06 L (60 ml) Primary container material: PET (preform-based stretch blow molding) Preform neck type: Corvaglia e 29/21 Included utilities: Compressor (1), Chiller (1) Not included: Preform unscrambler (0), Preforms tipper (0), Elevator (0), Air Recovery System (0) Condition: In storage Documentation: Manuals available Advanced Automation & Control Systems This second hand Sipa 8/4 offers straightforward operation through a centralized operator interface designed for routine parameter adjustments. Heating, stretching, and blowing parameters can be configured to suit the specified preform and neck finish, supporting consistent bottle quality for small-volume applications. Central control panel with recipe/parameter management for quick setup Multi-zone preform oven for precise thermal conditioning (typical for the series) Integrated alarms and diagnostics to assist maintenance and uptime Safety features included with guarding and interlocks around moving and hot sections Standard industrial three-phase electrical connection (exact ratings available on request) Production Line Integration Capabilities Designed for seamless integration in a used bottling line, the machine can be fed by a preform hopper/elevator and unscrambler (not included) and discharges to conveyors toward rinsing, filling, capping, and labeling systems. Its output matches compact lines handling small PET bottles for water, juice, functional shots, syrups, and other beverages. Bdods Adywxspfx Andsi Upstream compatibility with preform tipper, elevator, and unscrambler systems Downstream integration with rinsing, filling, capping, labeling, inspection, and packing Supports beverage production workflows for water, juice, beer, wine, and more (downstream processes may include PET, glass, or aluminum packaging) Format changes within the 0.06 L range via appropriate molds and change parts Machine Condition & Maintenance History The unit is currently in storage with manuals available, facilitating recommissioning and operator training. As with any second hand industrial packaging equipment, a full inspection, routine service of the pneumatic and heating circuits, and verification of utilities are recommended prior to start-up. Wear parts and consumables should be assessed to align with production targets. Operational Performance & Versatility With four cavities and a 3,500 bph nominal speed, th...

Condition: used, Year of construction: 2013, Application: PET preform injection molding Machine type: High-performance, two-stage PET preform injection molding system Clamping force: 2250 kN Bjdpo Abarkefx Andjdi Injection configuration: P100/110 injection unit with E100 extruder Maximum PET shot weight: 3,344 g / 7.4 lb Minimum PET shot weight: 372 g Injection unit stroke: 340 mm E100 extruder PET transfer capacity: 3,613 g Tie bar spacing: 660 x 660 mm Clamping stroke: 755 / 920 mm Shut height range: 585 / 750 mm Daylight: 1,505 mm Ejector stroke: 200 mm Approximate clamping unit weight: 7,802 kg Approximate total injection unit weight without oil: 13,150 kg Compatible mold configurations listed by HUSKY: 6, 8, 12, 16, 24, 32 and 48 cavities Maximum listed cavity configuration: 48 cavities Typical preform applications include PET bottles and other high-volume packaging products Designed for high productivity, repeatable molding performance, and integrated preform production cells.