Used Pile Turner for sale (472)

Condition: used, Schulz hydraulic portal press type H26 buy used Machine data: max. pressure 1500 kN (150 tons) Main motor 55kW Cooling system motor 3kW Rexroth hydraulic system Tool plate dimensions 850x760 mm Nodpfxjvxtrxs Akmsdc

Condition: ready for operation (used), Year of construction: 2003, machine/vehicle number: 10362, Brand: Burkle Model: SLC Machine no: 10362-01 Year of manufacture: 2003 Technical data of the machine (BURKLE SLC) General data - Type: SLC - Working width: 1300 mm - Working height: 900 ± 20 mm Workpieces - Workpiece characteristics: Flat, self-rigid - Workpiece width (max): Working width - Workpiece width (min): 350 mm - Workpiece length: 3 - 100 mm - Tolerance of the workpiece height over the entire working width: - Single track operation: ± 0.5 mm - Multi-track operation: ± 0.2 mm - Workpiece weight (max): 250 kg Piling material - Inspection material/cleaning agent with a self-ignition temperature: ≥ 200 °C Transport unit - Back pressure roller: See order confirmation - Rubber ring: See order confirmation - Diameter: 186 mm - Feed speed: 8 - 25 m/min Material circulation - Material pump feed capacity (double stroke): 575 cm³ Piling unit Piling roller - Rubber ring: See order confirmation - Diameter: 238 mm Ndedpsv Hn N Uefx Akmec - Temperature (in case of optional heating/cooling application roller): Max 60 °C - Peripheral speed: Approx. 8 - 25 m/min Dosing roller - Diameter: 174 mm - Temperature (with optional heated/cooled dosing roller): Max 60 °C - Peripheral speed: Approx. 3 - 9 m/min Accuracy of application over the entire working width at: - Application rate > 10 g/m²: ± 5 %. - Application rate < 10 g/m²: ± 10 % Adjustment of the feed-through height - Feed-through height (max): 120 - 5 mm - Accuracy of setting: ± 0.1 mm Compressed air connection - Required air pressure: 6 bar - Compressed air consumption: Approx. 50 NI/min Dimensions / weights - Dimensions: See installation drawing - Weight at working width 700 / 1300 / 1600 mm: 1250 / 1450 / 1600 kg Electricity - Connection values, voltages: See data sheet for electricity Other information - Noise level: < 70 ± 4 dB (A) Table 1-4: Technical data for standard sizes of the machine (continued) Note: The speed is limited to a maximum of 20 m/min when the dosing roller and height setting are set to a safety distance exceeding 120 mm (cleaning coupling). Stock no: 2002443BXM

Condition: ready for operation (used), COMPLETE KRONES PET BOTTLES ASEPTIC FILLING LINE FOR FRUIT JUICE/BEVERAGES AND SPRITZERS. SUITABLE FOR STILL AND CARBONATED PRODUCTS. YOM 2002-2007 CAPACITY: 0,5L x 36.000 BPH 1,0L x 30.240 BPH 1,5L x 25.200 BPH BOTTLE CLOSURES 28mm. THE LINE INCLUDES BOTTLE BLOWING, FILLING, LABELING, PACKAGING AND PALLETIZING: 1. Control unit: Ruland 2002, touchscreen, flash heating & CIP/SIP 2. Pasteur: Ruland 2002, tube heat exchanger, 1315 L supply tank, max. 21,800 L/h Ndjdpfxexm Rwqe Akmsc 3. Sterile tank: Roth 2002, 11,000 L 4. Carbonization: Roth/Ruland 2002, 2575 L, disconnected 5. Nitrogen system: Terboven/ISTE 2002 6. Hygienic center: Ecolab/Lang 2002, CAF, no PLC 7. Sterile water system: Roth/Ruland 2002, 9,000 L/h, buffer 2575 L 8. Sterile water system: Roth/Ruland 2002, 9,000 L/h, buffer 2575 L 9. CIP/SIP: Ruland 2002, 20,000 L/h, 1315 L supply tank 10. Cleanroom: Weiss 2002, ventilation/overpressure 11. Preform hopper: Dieterle 2002, MD3 12. Preform feeding: Tanner 2002, HFT 4730 / RGT 1624 13. Blow molding: Krones Contiform S16 2002, 16 stations, 1.0–20,000 b/h 14. Air conveyor: Krones 2002, automatic rail adjustment 15. Cap conveyor: Gassner 2002, 2 container positions, cap elevator 16–18. Filling machine: Krones CAF VODM 100 2002, injector (60), rinser (80), filler (100), capper (20), 1,0–20.000 b/h, 28 mm caps, still/carbonated 19. Label check: Krones 2002, incl. in Prontomodul 20. Bottle check: Krones 2002 21. Conveyor: Krones 2002, air blower before labeling 22. Labeling machine: Krones Prontomodul 2007, max. 35.600 b/h 23. Canmatic module: Krones 2007, paper labels 24. Contriroll module: Krones 2007, film roll 25. MHD coding: Videojet Excel/170i 26. Shrink wrapper: Krones Variopak 2002, 0.5–36,000 b/h, carton feeder & film transport 27. Packaging conveyor: Krones 2002 28. Handle applicator: Twinpack MHTE 2002 29. Empty pallet magazine: Krones LPM 2002 30. Palletizing: Krones robot 3A loader 2002, 4,000 packages/h 31. Pallet conveyor: Krones 2002, transfer cart & turner 32. Empty pallet magazine: Krones LPM 2002 33/34. Pallet stretch wrappers: Franpak 2002, top sheet applicator 35. Tying machine: Bornbinder HB 2002 36. Pallet coding: Logopak EAN 128 2003 THE LINE IS STILL NOT DISMANTLING, EXCELLENT CONDITION. LOCATION - GERMANY.

Condition: new, functionality: fully functional, Year of construction: 2025, SCHORR RR200THX – Professional Wood Chipper for Branches up to 200 mm ✅ New & In Stock ✅ Shipping Available ✅ Self-Feeding The SCHORR RR200THX is a powerful drum wood chipper designed for professional use. It easily processes branches and trunk sections up to 200 mm in diameter and impresses with its robust construction, high throughput, and user-friendly operation. Equipped with a 25 HP petrol engine, this chipper delivers ample power for daily tasks in gardening, landscaping, and forestry. The electric start (e-starter) ensures comfortable and reliable startup—even in cold temperatures. The self-feeding cutting system, featuring 2 blades and 1 counter-blade made of hardened steel, guarantees a clean chipping result and consistent material flow. The large feed opening allows for quick and safe material input, even with heavily branched wood. The discharge chute is rotatable 360°, allowing you to direct the wood chips precisely—into piles, trailers, or big bags. Advantages - Self-feeding: No manual pushing required - E-starter: Convenient push-button starting - Robust cutting system: Hardened steel blades for long service life - Heavy-duty steel frame: Stable, torsion-resistant, and durable - 360° discharge chute: Flexible direction of chip output - Easy maintenance: Simple access to blades, filters, and oil - Mobile: Drawbar with parking brake for secure stationary placement and transport Technical Data Manufacturer: SCHORR Model: RR200THX Drive type: V-belt Ndodpfsxu I T Esx Akmoc Max. branch thickness: 200 mm Chipping type: Drum, self-feeding Number of blades: 2 + 1 counter-blade Weight: 255 kg Overall length: 2819 mm Overall width: 1217 mm Overall height: 1550 mm Discharge chute angle: 360° Engine power: 19 kW / 25 HP Displacement: 764 cc Starting system: E-starter The RR200THX is built for long-term use. All components are easily accessible, allowing maintenance to be carried out quickly. Spare parts are available from stock at any time. Upon request, we offer technical service and repairs in our own workshop or directly at your site. Financing Leasing or installment payment available—please contact us for details.

Year of construction: 1988, condition: good (used), machine/vehicle number: 11801, Gietz FSA 720 Foil/stamping embossing press. size 720x520 mm, minimum sheet size 297x210, Double sheet detection, pressure 120 t, max speed 5000 sheets/h, pile height 950 mm with max 700kg, pile height on delivery 700mm, dimensions of the machine 380x280x195 cm Machine no: 11801 Nsdpswnqrgsfx Akmjdc

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 003002, paper weight (min.): 35 g/m², paper weight (max.): 209 g/m², paper width (max.): 738 mm, paper height (max.): 1,300 mm, AFC-746 F, six parallel cross folds + cross knife + 2 parallel cross folds TECHNICAL DETAILS Ndedpfjyrnz Ejx Akmsc Max. paper size: 738 x 1,300 mm Min. paper size: 210 x 297 mm Pile height: 1,200 mm Paper weight: 35 to 209 g/m² MACHINE DETAILS Power supply: Three-phase, 400 V Current: 12.6 A Connected load: 5.3 kW Counter reading: approx. 50 million sheets Dimensions (L x W x H): approx. 4,380 x 1,870 x 1,680 mm EQUIPMENT PFU-74F pallet feeder User-friendly touchscreen control panel 6 folding pockets First knife fold and 2 pockets under the knife Second knife

Condition: used, Year of construction: 2009, Palletiser Kolbus PL 771 Year: 2009 Description: - Automatic setting - Colour monitor with touch screen - Infeed conveyor - Turning device - Stacking robot - Air table - Pallet dispenser Njdszcuz Hepfx Akmodc - Slip sheet feeder - Pallet delivery station Technical specifications: - Infeed speed: up to 30 piles/min - Stack size max.: 563 x 406 x 350 mm - Stack size min.: 150 x 100 x 25 mm - Pallet size max.: 1.340 x 1.000 mm - Pallet size min.: 1.000 x 800 mm - Loading size min.: 900 x 700 mm - Palletizing height max.: 1.600 mm incl. pallet - Loading capacity max.: 1.500 kg/pallet

Condition: used, Year of construction: 2014, Folding machine MBO T700/4 Year: 2014 Description: - 4 page folder - MBO Navigator Feeder - Round pile feeder: R 700 - Pump Buckle folding unit: 1 MBO FP 10 Ndedsyzdt Djpfx Akmsc - Automatic buckle plate adjustment - First buckle folding section with 4 buckle plates - Slitter shaft cassette - Perforating shaft - Anti noise hood(s) - Excluding delivery Max. mechanical speed: 30 - 230 m/min Maximum size range: 68 x 120 cm Minimum size range: 15 x 20 cm

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, Polar LW 1000-4 stacking lift, year of manufacture 2003 Njdpfozwg A Rsx Akmedc Platform: 80 x 126 mm The automatic lifting of the cutting material allows the operator to load the material into the shaking device or directly into the cutting machine at an ergonomically favorable working height. The stacking lift can also be used to unload cutting material. Stacking lifts do not need to be anchored to the floor and can therefore be easily relocated. They are equipped with continuously adjustable photoelectric barriers for automatic lifting or lowering. The control panel can be easily mounted on the right or left side.

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 230 kg, machine/vehicle number: RR42ABH, SCHORR RR42ABH – Professional wood chipper for branches up to 100 mm in diameter ✅ New & in stock ✅ Shipping possible ✅ Self-feeding ✅ For tractors The SCHORR RR42ABH is a powerful drum wood chipper for professional use. It effortlessly processes branches and log sections up to 100 mm in diameter and impresses with its robust design, high pulling power, and easy operation. Using the 3-point linkage (Category 1 and 2), you can attach the RR42ABH to your tractor in just a few minutes. The height-adjustable support feet keep it securely in position during assembly and disassembly, and the matching PTO shaft is included. With a power requirement of 18 to 50 hp, it is also suitable for smaller tractors and compact tractors. The self-feeding cutting unit with 4 knives and 1 hardened steel counter-knife guarantees a clean chipping result and a consistent material flow. The large feed hopper allows for quick and safe material feeding, even with heavily branched wood. The discharge chute is 290° rotatable, so the chipped material can be deposited in a targeted manner – whether in piles, trailers, or big bags. Advantages ✓ Compact 3-point mounted chipper for tractors from 18 to 50 hp ✓ Chips branches and brushwood up to 100 mm in diameter ✓ Extended feed hopper also handles bulky crown wood ✓ Robust knife disc with 4 knives and counter-knife ✓ Rotatable discharge chute (290°) for targeted filling Nsdozh Hlgopfx Akmsdc ✓ Height-adjustable support feet, quick 3-point mounting (Cat 1 & 2) ✓ PTO shaft included, ready for use in minutes ✓ Directly from the manufacturer, with spare parts stock & workshop service Technical data Manufacturer: SCHORR Model: RR42ABH Drive type: PTO, direct drive 3-point category: Cat 1 & 2 Max. branch diameter: 100 mm Chipping type: Drum, self-feeding Number of knives: 4 + 1 counter-knife Weight: 230 kg Overall length: 1070 mm Overall width: 830 mm Overall height: 1240 mm Discharge angle: 290° Recommended tractor power: 18-50 hp PTO speed: 540-1000 rpm The RR42ABH is designed for long-term use. All components are easily accessible, allowing maintenance work to be carried out quickly. Spare parts are available at any time from stock. Upon request, we offer technical service and repairs in our own workshop or directly at your location. Financing Leasing or installment payments are possible – please contact us.

Condition: excellent (used), Year of construction: 2022, Ref: 11080 . 2022 Horizon CABS 4000-VF EVA Line Excellent Condition! Only 985,000 books produced! 'Computer Aided Binding System' designed for bind-on-demand production. ‘V’ = Variable, book on demand capability ‘F’ = Flap cover feeding capability Comprising: (2020) Tecnograf ‘MettaLibro’ Book block feeder SB-09VF Variable binder with hand feed station and 9 clamps LCD screen operator console for various functions/set-ups ‘PX-Core’ Central control computer system SI-15 book block sensor unit for auto system set-ups & quick book size/thickness make-ready S-09S Automatic feed unit Auto cover score & register settings from data input Njdpfx Ajy Awcbjkmedc Milling & roughing station with DB-15 milling blower unit PM-20II EVA hot-melt pre-melt unit MU-09 EVA hot-melt spine glue unit with side glue discs Pile rotary grip cover feeder with double sheet detection LD-09 lay-down delivery belt PP-101 pre-stacking unit with approx. 9m conveyor to; HT-110 Automatic three knife trimmer HC-110 manual feed conveyor to use trimmer as standalone LCD screen operator console for various functions/set-ups Quick book size/thickness make-ready unit Dust bag extraction unit Roller delivery unit Including tools, accessories & manuals. Specification: Binder - book size: Max: 400 x 330mm (manual) Portrait Max: 330 x 250mm (auto) Min: 148 x 105mm Max: 330 x 320mm Landscape Min: 135 x 185mm Book thickness: 1 - 45mm Open cover size: Max: 400 x 660mm Min: 135 x 220mm Trimmer, book sizes: Max: 330 x 330mm untrimmed Max: 300 x 300mm trimmed Mechanical speed: Max: 4,000 cycles/hr. auto

Condition: used, functionality: fully functional, total width: 8,000 mm, total height: 4,000 mm, total length: 70,000 mm, Pallet production line, Terwort, 17 seconds/pallet, completely modernized in 2023 Kallfass block saw Block switch Block buffer Terwort NM1 nailing machine Nedpfx Ajzp El Ujkmodc Deck storage Deck gripper Storage 2 x star turners Terwort NM2 nailing machine Skid milling machine Clamping device Miter saw Branding station Forklift Outfeed conveyor

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 36AMN, compressed air connection: 6 bar, working width: 360 mm, warranty duration: 12 months, operating speed: 420 mm/s, Komfi Laminator Amiga 3680 with HotKnife (NearLine, Generation 1) Showroom Machine, Manufactured 2025 Nodpozh S Ugsfx Akmjdc Specifications: Min. paper format: 200 x 250 mm Paper weight: 115 x 600 g/ m2 Thickness of sheets max. 0,7 mm: Overlap > 0 Thickness of sheets max. 1,4 mm: Overlap < 0 Suitable kinds of film: Polypropylene, Polyester, Nylon Film thickness: 24-50 μm Inner diameter of film reel: 3“ = 76,2 mm Outer diameter of film reel: 350 mm Output / laminating speed: 3-25 m/min(regard. technological conditions) Maximum output: - Average monthly capacity of machine: 100 000 B2 sheets Max. paper pile: 60 mm / length of sheet < 350 mm 30 mm / length of sheet > 350 mm Max. feeding table load: 20 kg Laminating temperature: according film manufacturer – max. 135°C Sheet overlap tolerance: ±1 mm Max. pressing force (0,6MPa): 15 kN Max. pressing force (0,8MPa): 19,5 kN (WARNING = limited life of the pressure roller) Max. linear NIP pressure, press 0,6 MPa: 60 N/mm / sheet width 250 mm 50 N/mm / sheet width 300 mm 41,6 N/mm / sheet width 360 mm Linear NIP pressure= 30 N/mm: sheet width 250 mm / 0,30 MPa sheet width 300 mm / 0,36 MPa sheet width 360 mm / 0,43 MPa Feeder: Bottom Suction Vacuum Feeder Laminating Unit: Adjustable distance stoppers for lamination unit to enable processing thick substrates and windows lamination. ”On-the-fly” side-adjustable unwinding shaft with adjustable brake force. Height-adjustable and removable spread roller perfectly removes wrinkles from laminate. IR heating for laminating cylinder. Temperature sensor inside the cylinder for precise regulation. Rubber coated pressure roller. The powerful pneumatic pressure system guarantees even nip pressure and perfect lamination results. Separator & Delivery: Decurling unit consisting of bar and roller with position control to move the snapping moment automatically when the position of decurler is changed. Built-in film perforator to enable sheet separation. Cam-driven separation roller with adjustable tearing action, delivery roller and sheet skewing wheel. Fixed delivery desk with adjustable air nozzles.

Condition: new, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 110SIS, compressed air connection: 6 bar, working width: 1,100 mm, warranty duration: 12 months, operating speed: 1,000 mm/s, Komfi Laminator Sirius 110 with HotKnife, Rotary Knife and Automatic Stacker Njdjzia S Nspfx Akmsdc New, Manufactured 2025 Ideal for commercial printing and packaging industry! Max. production speed: 60 m/min (5091 B1 sheets landscape/h); 50 m/min with hot knife (4243 B1 sheets landscape/h) Max sheet size: 1100 x 1100 mm Paper weight: 115-600 g/m² Dimensions (incl. automatic stacker): 7.08 x 2.71 m Min. sheet dimensions: 300 x 297 mm Max. paper pile: 1350 mm including pallet Thickness of laminating film: 24-50 μm Kind of laminating film: OPP, PET, Nylon Time of laminating roll warm up: 5 min Sheet overlap accuracy: 1.5 mm Consumption of compressed air: max 80 l/min Max. pressing force: 43 kN Max. linear nip pressure: 39 N/mm Double capacity for sheets in the high-pile feeder and for laminating film = reduced machine downtimes, increased machine efficiency. Square shaped feeder for B1 sized sheets to increase the machine productivity. Easy pallet placement. Energy saving zone heating system with fastest heat up time. Feeder: 2-way accessible high pile pallet feeder with Komfi double action feeding head. Precise and constant sheet overlap achieved thanks to the sheet registration system using a mis-feed sensor, front lays, accelerating in-feed pulleys and guiding plates to prevent thin paper from wrinkling. Laser guided pallet driving system with quick adjustable lateral stops and air nozzles. Combined air / vacuum compressor. Adjustable separation blowers for reliable separation of sheets from the pile and trouble-free loading of long sheets. Laminating Unit: High-polished chrome laminating roll, with deep drilled sensors located close to the film surface. Dry, low inertia multi zone heating system using resistance heater, temperature detection by deep drilled sensor with the touch-less signal convertor. Laminating rolls are belt driven to achieve outstanding sheet surface quality for special metallic and holographic films. Pneumatic nip pressure applied by durable polyurethane coated pressure roll, with nip stoppers for thick sheets and windows lamination. „On-the-fly” side adjustable air expansion unwind shaft, with automatic film tensioning and capacity detection. Height adjustable film spread roll to smooth wrinkles on film. Zone heating of the laminating roller keeps roll temperature even and saves energy when laminating small formats. Separator & Delivery: Pneumatic pull roll with adjustable nip force to create tension for sheet decurling. Dual roll/bar decurling adjustable unit with position detection to have sheet registered for its separation. Decurling unit consisting of bar and roller with position control to move the snapping moment automatically when the position of decurler is changed. Built-in film perforator to enable sheet separation. Cam-driven separation roller with adjustable tearing action, delivery roller and sheet skewing wheel. Automatic stacker. Options: Film slitter to cut film to the requested width. Additional On roll perforator. Effect foiling device (OTF). Pallet fine positioning tool. Hot knife with variable rotation speeds for perfect separation of thick, PET and Nylon films that eliminates flagging. Antistatic bar removes static charge from the separator to avoid thin sheets wrapping onto the rollers. Air ionizer (behind the snapping roll) – helps smooth unloading of sheets on the unloading table without static charge. Windows lamination kit. Strip lamination kit.

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on gound) to in-feed pile of panels to the Loader Out-side motorized rollers table (which receives panels from the Loader) Separate electric and command panel Perimetral safety metal grids Nsdpfx Ajfi Tg Hjkmjdc Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 30

Year of construction: 2008, operating hours: 9,750 h, condition: used, Field of application: Construction Ndodpfx Aoh Tyzxskmoc Please contact Mohamad Fattah Ahmad for more information Piling rig Upper carriage : Sennebogen BS 80 R Engine : CAT C 18 570 kW Optional : Vibrator MR 125 V, KDK 232 S, DKS 100/ 200 Additional : Systems Vibrator, Kelly and CFA drilling central lubrication, air compressor , prepration CSM The machine is in very good working condition!

Year of construction: 2006, operating hours: 13,700 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Nedeh Ty Akjpfx Akmjdc LIEBHERR LRB 155 + Juntan Hammer HHK 5/7 More details on serious require, current location Germany Yard M2 GmbH Wilhelmshaven Juntan Hammer HHK 5/7 Year. 2002

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 001, cutting length (max.): 5,000 mm, Offered is an automatic edge trimming line with singulation, trimmer for cross-cutting, 2 stacking machines, additional discharge, and trimming of stacking slats: Boards 2000-5280 mm long, 16 - 40 mm thick, 70 - 260 mm wide, cycle rate of 29 or 58 pieces/minute, operated by one person sitting at the joystick: - Cross-transfer of boards with a 4-strand chain cross conveyor - Singulation inclined conveyor 6000 mm wide, 3000 mm at an angle - Alignment roller conveyor - Chain cross conveyor as a layer former - Star turners and sorters before the trimmer - Edge detection (ALFHA edger) - Trimmer with 11 saws in a 50.5 cm grid: The operator (sitting) at the joystick evaluates: without re-trimming, 5000 mm to stacking machine 1, alternatively: without re-trimming, 4000 mm to stacking machine 1 with re-trimming, 4000 mm to stacking machine 2 with re-trimming, 3000 mm to stacking machine 2 with re-trimming, short lengths for discharge into a box with re-trimming, short lengths for discharge into a box with re-trimming, 2 or 3 x 101 cm for stacking slats with re-trimming, 2 or 3 x 101 cm for stacking slats Njdpfx Akoy Uzhfjmodc or waste cut - cut length 505 mm for the underlying vibration trough - 2 stacking machines: 1 x 2500 to 5280 mm and 1 x 2000 to 4280 mm - Automatic lowering of finished packages and transfer to automatic strapping - FROMM strapping with 16 mm plastic band and automatic transfer to the discharge roller conveyor - ALFHA control system with Siemens S 7 - ensures perfect operation. Performance records/daily logs - Control cabinets with Siemens components, SEW motors, Telco light barriers For example, one employee, processing side boards of 4000/17 x 76 mm, produced, packaged, and strapped approximately 15,000 boards in 9 hours. The system is still assembled, but the upstream chipper has already been dismantled. Therefore, the system is immediately available. It is very robustly built and has always operated smoothly and without any problems. We can provide a process video via WhatsApp!

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, HESS RH 2000 complete line, production pallet size 1400-1100, double feeder machine, year of manufacture 2000, stacking and destacking elevator, rack trolley, Doppler, centering device, packaging machine, horizontal strapping, pallet turner, 5 armored mold conveyors, noise-reducing panels, Siemens S7 control. Ndodpoxliqgofx Akmoc

Year of construction: 1995, condition: ready for operation (used), High speed model with SPLIT ROLL high low pile patterning device, working width: 5180mm, needle gauge: 1/8 inch, 1632 (2x 816). Equipment: adjustable needle stroke eccentric and needle stroke adjustment lever with counterweights, prepared in side drive frames, easily accessible at working height, pile height adjustment range 5-16mm, table height adjustment (machine bed) with hydraulically controlled table lock via ENCORE PC memory programmable controller, looper stroke and knife stroke eccentrics with counterweights, 2 needle bars with individual needles, 2 looper bars with Cut Loop individual loopers, 2 knife bars with Tuftco knife blocks, 8 knives per block, individually replaceable, reed plates for front and rear needle bar, ENCORE PC memory programmable controller for controlled stitch density and controlled backing tension, main shaft designed as a hollow shaft with integrated pump controlled pressurized oil circulation lubrication or spray lubrication to each needle drive connecting rod bearing and main shaft bearing in the side drive frames, 2 PC memory programmable HYDRASHIFT DRIVES for smooth needle bar shift, 12 shift steps each to the right/left per needle bar, high speed version with linear slide bearings in the needle bar suspension, pneumatic disc brakes on the main shaft, main shaft rotation via ratchet indexing gear, variable main drive (2x15HP) with frequency inverter, Siemens memory programmable controller with fully wired control cabinet, mounted externally on the control cabinet door. An on-site inspection is possible. Ndodpezcfhdsfx Akmec

Condition: excellent (used), functionality: fully functional, ARI high capacity line for big logs Log deck 2 sections Step feeder Log conveyor Debarker infeed (Remill) Debarker Cambio 90-75/6 (or a Cambio 500) 2d scanner for reject boxes Log conveyor with 2 reject boxes Log conveyor, kickers to the left Buffering deck and step feeder Log conveyor Rema 3d scanner AriVislanda LT2 auto log turner 2006 AriVislanda LI-600 log centering infeed 2006 AriVislanda RL-600 Reducer AriVislanda QSS-700 Saw 2011 AriVislanda VFW 600 L 2011 AriVislanda board separator 2006 Block tilt AriVislanda block infeed type Nils AriVislanda RC-600 Reducer Ingvar Persson turn table AriVislanda 500A Infeed AriVislanda 509-7F Multirip AriVislanda boardseparator Beltconveyor Dual Edging lines Söderhamn (1 left 1 right) 2 x 300 m/min Cross conveyors Söderhamn Elevator Söderhamn 483 Scanners Söderhamn 528 Infeed Ndsdpfjwp E Tnex Akmsc Söderhamn 5100 Edger Söderhamn 5400 Edger outfeed with reject displacement EdgeIT system

Condition: used, Falzmaschine / Folding Machine Heidelberg Stahlfolder KD.2/78-4-KL Nodsx Sxpbopfx Akmjdc Year 2001 - Serial-No. 703413/01-298045 Arbeitsbreite max. 780mm / Working width max. 780mm Rundstapelanleger / Round Pile Feeder 1. Station 4 Taschen / 1. Station 4 buckles 2. Station 2 Schwerter / 2. Station 2 knives Schuppenauslage / Stream Delivery SAK Rietschle Kompressor / Rietschle Compressor Inklusive Handbücher / Manuals included Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, 16 pages buckle Folding machine Heidelberg Stahlfolder TD94/6-4 Falzmaschine / Folding machine Heidelberg TD-94/4-4-2 Nsdex Ur Rkjpfx Akmjdc Baujahr / Year 2001 - Serial-No. 701544 Rundstapelanleger / Round Pile Feeder  Arbeitsbreite / Working width max. 940mm Falztyp / Folding Type 4 - 4 - 2 buckles Schuppenauslage / Stream delivery Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2011, Printing & Processing Units: - 5 x EXL offset printing units (single) - 1 x Flexo printing unit (single) - 1 x EC printing unit on rail Nedpfx Aksy Rp E Demodc - 7 x UV drying stations (GEW HCP) - Corona S-unit - Die-cutting and laminating nip - Laminating unit – unwind / rewind Web Handling - Combination unwind / infeed unit S-1000 - Web cleaning unit (TEKNEK, single) - Web turner unit with backside reading - Combination outfeed / rewind unit S-1000 - Edge trimmer / crush cut unit Registration & Control - Single matrix unit - Double vertical die unit (SD) - Main control unit - Web video powerscope 4000 (motorized) - ELTROMAT key adjustment system Auxiliary Systems - Technotrans water dampening system - Cooling water in / out for cooling rollers (UV system) - Exhaust air connection (max. 70 °C)

Condition: like new (used), Demonstration machine The CTR1000H80 band saw with an 80 mm saw blade for even cleaner cuts and higher yield. Extra strong, solid, and durable sawing unit for log diameters up to 1000 mm. Soft starter included, expandable with extension sections. Automatic feed with infinitely variable speed. Electric height adjustment controlled from the operator panel. CE certified. Advantages and features: - Saw head suspended on both sides for greater stability and better precision. - 8.4-inch touchscreen LCD for quick and precise height adjustment. - With telescopic lever log turner and log lifter for easy log manipulation. - Log lifter with drive for horizontal log feed. - 5 swiveling hydraulic angle stops. 2 log clamping tools. - Hydraulic saw blade tension for quick adjustment. - Electrically adjustable saw blade guide and automatic coolant pump for high operator comfort. Technical data: Max. log diameter: 1000 mm Max. board width (slab width): 920 mm Max. saw blade stroke: 900 mm Min. cutting height: 30 mm Max. frame opening: 375 mm Cutting length of the base section: 7.5 m Length of the extension section: 3 m Saw blade drive output at 100% duty cycle: 22 kW Nodjzqrm Iopfx Akmjdc Feed motor at 100% duty cycle: 3 kW Stroke motor: 0.55 kW Motor of the hydraulic unit: 5.5 kW