Used Turning Station for sale (12,256)

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Urban SV 530 with a turning station, configured to process from right to left, in very good condition, complete with internal and external tools for finishing PVC profiles. Upon request, we can install the machine and program it for your specific profile. Iedpfsz D Ildox Agyeih

Condition: good (used), Good condition. Iiedexbpgyopfx Agyeh

Condition: used, Turning station RITTAL / E SYS-K System GmbH Automated turner for packaging made from ALU system profile Swivel station with roller conveyor, ALU system profile BOSCH REXROTH Isdpov Tdkbsfx Agysih Weight of turning device: 730 kg As-new condition

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 02-2026, total width: 2,100 mm, total length: 2,100 mm, total height: 900 mm, overall weight: 800 kg, operating pressure: 60 bar, table height: 770 mm, Work table with pivoting mechanism AWT-250 S – easily bring components to the desired working height with head pressure, without any force, and tilt and rotate them using the integrated pivoting mechanism. Iisdpfx Aezwhaqsgyeh Design: electro-hydraulic, Schuko plug 230V, controlled via hand buttons for up/down, lifting – lowering – pivoting. Mounting and pivoting of large and bulky panels, frame parts, and large workpieces can be handled by one person. Max. component size 4000x3000mm, load capacity 250 kg. Working height can be continuously adjusted from approximately 770-1000mm, and the useful stroke is 230mm vertically. The center support is 160mm wide and has 2 movable infeed/outfeed rollers on each side, which are automatically retracted at the top and extended at the bottom. The 2 tiltable work surfaces are WxD: 950x2000mm, plus 3 pull-out extensions of +500mm on each side. The total horizontal working area is 2100 x 2000mm; the support surfaces are equipped with brush strips for gentle workpiece processing. In the folded position, the open angle is approximately 32° vertically.

Year of construction: 1986, condition: used, Turning station, turning table, turning station, turntable, transport system, roller conveyor -for: edge banding machine, edge banding machine, edge banding machine -Turning station: for turning workpieces -Roller conveyor: wide -Roll width: 2900 mm -Roller conveyor length: 1500 mm Iedpfx Asb R Adcsgyjih -Turning head roller: rubberized -other roller conveyors available for an extra charge -Transport dimensions: 1500/3850/H1950 mm -Weight: 969 kg

Condition: good (used), Year of construction: 2008, functionality: fully functional, Weiler DZ 40, Year of manufacture: 2008, Siemens 840 D control, Travel X/Z: 200/350 mm, Turning diameter: 180 mm, Max. swing diameter: 560 mm, Y-axis: +/-25 mm, Q-axis / programmable tailstock, Ijdpez Sml Iofx Agysih Q-axis travel: 360 mm, Q-axis measuring system: rotary, Tailstock: MK 4, Main spindle max. bar capacity: 42 mm, Spindle bore: 52 mm, Rapid traverse X/Z/Q: 30/30/20 m/min, Turret: 16 stations – all driven, VDI 25, Shank diameter: 25 mm, Driven tools up to 4,500 rpm, Parts catcher, Accessories, Driven tool holders, Fixed holders,

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, turning diameter: 145 mm, CNC turning machine Gildemeister Twin 42 Year of manufacture: 2004 Control system: Siemens 840D Powerline Turning diameter: 145 mm Max. bar diameter: 45 mm Spindle head: Flat flange 120 h5 Iodpfezl Dvkjx Agysih Chuck: 130 / 140 mm Main spindle speed: 20–7,000 min⁻¹ Main spindle power: 28 / 22 kW (40/100 % duty cycle) Main spindle torque: 180 / 140 Nm Counter spindle: Yes, same power X-axis: 220 mm Z-axis: 320 mm Y-axis: ±30 mm Rapid traverse X/Y/Z: 30 / 15 / 30 m/min Turret: 2 × 12 stations Tool holder: VDI 25 Machine weight: approx. 5,300 kg Connected power: approx. 40 kVA Design: 60° inclined bed, linear guides Chip conveyor, Bürener type SPE 63/30-250 Z60 Tool monitoring system, Artis type CTM Tailstock mounted on counter spindle slide, tailstock stroke = 230 mm Tailstock force = 300 daN Center bore MK3 Overload clutch for the X and Z axes of slides 1 and 2 Package for bar machining consisting of: Workpiece extraction device Workpieces can be automatically unloaded from both the main and counter spindles Workpiece dimensions: Ø6 – Ø65 mm, length approx. 300 mm, max. weight 3.5 kg Collet chuck for quick-change tool holders, size 42 Hainbuch Spanntop Connection for bar feed Bar loader magazine, IRCO type SiMag 42

Condition: excellent (used), Year of construction: 2018, operating hours: 7,200 h, Technical Data Main spindle, counter spindle Turning length: mm 660 Spindle bore: mm 65 Chuck diameter: mm 165 Speed max.: min-1 6,000 Power (100% / 40% duty cycle): kW 20 / 24 Torque (100% / 40% duty cycle): Nm 125 / 170 C-axis resolution: degrees 0.001 Slide travel X: mm 710 Rapid traverse: m/min 60 Feed force: N 6000 Turret, lower / upper Speed max.: min-1 7,200 Power max.: kW 9 Torque max.: Nm 16 Milling spindle Tool system: HSK-A40 Speed max.: min-1 7,200 Torque (25% duty cycle): Nm 52 Power (25% duty cycle): kW 22 Tool holder 1 Slide travel X: mm 230 Rapid traverse: m/min 30 Feed force: N 6000 Slide travel Y: mm +/-65 Rapid traverse: m/min 15 Feed force: N 10,000 Slide travel Z: mm 845 Rapid traverse: m/min 50 Feed force: N 6000 3 Turrets Turret 1 YB - 6-position tool changer HSK Turret 2 Y Turret 3 y Year of manufacture 2018 Control system Siemens SINUMERIK 840D sl Turning length up to 660 mm Spindle bore 65 mm Milling spindle with 360-degree B-axis Production hours approx. 7,200 h Turret, lower and upper Feature Specification Stations and tool positions 14 stations per turret (VDI 25), a total of 42 tool positions Maximum speed 7,200 min⁻¹ Maximum power 9 kW Maximum torque 16 Nm Milling spindle Feature Specification Tool system HSK-A40 Tool magazine 6 tool positions B-axis 360 degrees Maximum speed 7,200 min⁻¹ Torque at 25 percent duty cycle 52 Nm Power at 25 percent duty cycle 22 kW Tool holder 1 Feature Specification X-axis 230 mm, rapid traverse 30 m/min, feed force 6,000 N Y-axis ±65 mm, rapid traverse 15 m/min, feed force 10,000 N Z-axis 845 mm, rapid traverse 50 m/min, feed force 6,000 N Tool holder 2 Feature Specification X-axis 140 mm, rapid traverse 30 m/min, feed force 6,000 N Y-axis ±45 mm, rapid traverse 15 m/min, feed force 10,000 N Z-axis 810 mm, rapid traverse 50 m/min, feed force 6,000 N Workpiece removal Feature Specification Design Gantry part removal system with conveyor belt Maximum workpiece length 200 mm Maximum workpiece weight 5 kg Dimensions and connection values Feature Specification Length × Width × Height 5,355 × 2,235 × 2,400 mm Weight approx. 8,500 kg Connected power 42 kW Bar feeder magazine and accessories Feature Specification Bar feeder magazine INDEX MBL 65 Iisdpfsz Sywcex Agyoh Coolant system KNOLL system with band filter and high-pressure pump 80 bar Automation Automatic door Accessories Tool holder

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: TLUY7024, turning length: 600 mm, turning diameter: 250 mm, spindle speed (min.): 4,000 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 86 mm, rotational speed (min.): 4,000 rpm, bar passage: 76 mm, total height: 1,900 mm, total length: 4,500 mm, total width: 2,200 mm, overall weight: 6,500 kg, Equipment: documentation/manual, Takisawa TA25 CBT turning center Main spindle: collet chuck for SK65BZI collets Tailstock with jaw chuck, alternatively collet chuck for 173E collets 12-station turret, incl. 25 tool holders (6 powered) Fanuc 18-T control + Manual Guide control Operating hours in automatic mode: 16,800 hours The drive for the powered tools in the turret has been removed. Complete manuals and documentation incl. FMB 10-65 loading magazine with traversing unit Optically and technically in very good condition, hardly used. Year of manufacture: 2018 D60 conversion kit installed Isdpjz Smhpefx Agyoih Ex works

Condition: like new (used), Year of construction: 2021, operating hours: 1,400 h, CNC turning machine MT RENT T25FSY Iisdpfx Agjz I R Sbsyeh Year of manufacture: 2021 Control: SIEMENS 828 D Operating hours: 1400 h Technical data: * Year of manufacture: 2021 * Control: Siemens Sinumerik 828D * Operating hours: approx. 1,400 h * Max. swing diameter over bed: 600 mm * Max. turning diameter: 460 mm * Max. turning length: 558 mm * X-axis travel: 310 mm * Z-axis travel: 620 mm * Y-axis travel: 110 mm / ±55 mm * B-axis travel / counter spindle: 650 mm * Spindle bore: 77 mm * Max. bar diameter: 65 mm * Main spindle speed: max. 4,500 rpm * Counter spindle speed: max. 4,500 rpm * Main spindle motor: 23 kW * 12-station BMT-60 tool turret * 12 driven tool stations * Tool shank: 25 × 25 mm * Max. drilling bar diameter: 40 mm * Hydraulic working pressure: 40 bar Equipment: * Y-axis * C-axis * Counter spindle * Driven tools * BMT-60 turret * WTO / QuickFlex tool holder * Bar loader * Chip conveyor * Hydraulic 3-jaw chuck * Coolant system * Workpiece/part catcher * Foot pedals * Flat guides

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, CNC Horizontal Lathe Mori Seiki NL2000Y/500 Year 2012 Controller : MAPPS III Max Swing Ø923mm Max over cross slide Ø755mm Max Turn Ø356mm Bar Capacity Ø65mm Travel X260mm / Z590mm Y +/-50mm Iiedpjwvrfkofx Agysh Spindle Speed 5000rpm Turret 12 stations Max. milling speed 6,000rpm Chip conveyor Stock Clearance at 39.000EUR ONLY

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 490 mm, travel distance Z-axis: 780 mm, DOOSAN PUMA V550M – CNC Vertical Turning Lathe Ijdoz Albcspfx Agysih Manufacturer: DOOSAN Model: PUMA V550M Year: 2013 CNC Control: FANUC i-Series Machine Type: CNC Vertical Turning Lathe with C-Axis and Live Tools Machine Weight: 9,000 kg Machine Dimensions: 1,905 x 3,365 x 3,350 mm Maximum Swing Diameter: 800 mm Maximum Swing Over Carriage: 490 mm Maximum Turning Diameter: 730 mm Maximum Turning Height: 750 mm Maximum Load Capacity on Chuck: 650 kg Chuck Diameter: 390 mm Spindle Nose: ASA A2-11 Spindle Speed: 20 – 2,000 rpm Spindle Motor Power: 30 / 37 kW Automatic Spindle Speed Ranges: 2 C-Axis: ±360° with 0.001° angular positioning and hydraulic clamping X-Axis Travel: 490 mm Z-Axis Travel: 780 mm X-Axis Rapid Traverse: 12,000 mm/min Z-Axis Rapid Traverse: 16,000 mm/min C-Axis Rapid Speed: 200 rpm Turret: BMT-75 Turret Stations: 12 positions, suitable for live tools Live Tool Speed: 30 – 3,000 rpm Live Tool Motor Power: 3.7 / 5.5 kW Tool Size: 32 x 32 mm / Ø50 mm Live Tool Holders: 4 included, 2 radial and 2 axial Additional Tooling: Various fixed tool holders Automation Preparation: Automatic side door for loading automation Coolant System: Coolant tank with high-pressure pump Chip Removal: Rear chip conveyor Documentation: Manuals, electrical diagrams and EC/CE Declaration

Condition: used, Year of construction: 2018, functionality: fully functional, turning length: 530 mm, turning diameter: 255 mm, spindle motor power: 22 W, spindle speed (max.): 4,000 rpm, spindle bore: 65 mm, rotational speed (max.): 4,000 rpm, type of input current: three-phase, bar passage: 65 mm, chuck outer diameter: 210 mm, Equipment: documentation/manual, For sale is our well-maintained CNC turning center, a Hyundai WIA L210 LMA, manufactured in 2018, from our production facility. Technical data: Spindle bore: 65 mm Max. turning diameter: 255 mm Max. turning length: 530 mm Turning chuck: Samchully, 210 mm Main spindle speed: 4,000 rpm, 22/18.5 kW Control system: Siemens 828D C-axis Tool turret VDI 40, 12 stations, driven tools (5,000 rpm) Coolant pressure: 4.5 bar Tool presetter: Q-Setter Part catcher Preparation for bar feeder magazine Chip conveyor Tailstock MK4 The price includes an extensive tool package: 6 driven tools with internal cooling (3 of which are angled at 90°) 7 holders for turning tools and drill bars Isdpsz Smd Rofx Agyeih 2 sets of soft jaws for the above-mentioned chuck Condition: well-maintained, from ongoing production, technically flawless. Dismantling and loading can be arranged.

Condition: like new (used), Year of construction: 2019, operating hours: 3,500 h, functionality: fully functional, bar passage: 117 mm, overall weight: 8,500 kg, The Hyundai WIA L400MC is in like-new condition. Inspection under power is possible at any time. Model: Hyundai WIA L400MC Design: Standard Bore Swinging diameter over bed: Ø 780 mm Swinging diameter over slide: Ø 535 mm Max. turning diameter: Ø 560 mm Max. turning length: 1,180 mm Bar capacity: Ø 117 mm Chuck size: Ø 381 mm (15") Max. spindle speed: 2,000 rpm Spindle motor power (max./continuous): 37 / 30 kW Spindle torque (max./continuous): 3,073 / 2,490 Nm Spindle drive: Belt drive with 2-speed gearbox Spindle taper: A2-11 C-axis: 0.001° Travel distances X-axis: 320 mm Z-axis: 1,200 mm Rapid traverse X/Z: 20 / 25 m/min Guideways X/Z: Box guide / Flat guideways Number of tool stations: 12 Tool holder, outer diameter (OD): □ 32 mm Tool holder, inner diameter (ID): Ø 63 mm Turret indexing time: 0.2 s Mount: BMT75P Driven tools Motor power (max./continuous): 7.5 / 5.5 kW Max. speed: 4,000 rpm Torque (max./continuous): 44.7 / 35 Nm Collet size: Ø 26 mm (ER40) Tailstock Tailstock taper: MK5 (integrated) Quill diameter: Ø 150 mm Quill stroke: 132 mm Tailstock travel: 1,100 mm Additional technical data Coolant tank: 300 liters Lubricant tank: 2 liters Electrical connection: 46 kVA Recommended cable cross-section: > 50 mm² Iodpjz Ibaiofx Agyeih Voltage / Frequency: 220 V / 60 Hz or 200 V / 50 Hz Footprint (L x W): 4,202 x 2,207 mm Machine height: 2,153 mm Machine weight: approx. 8,500 kg Control: HYUNDAI WIA FANUC i Series / FANUC 32i-B

Condition: good (used), Just Normlicht Proof Control Station Ideal as a control desk for a printing machine. 230V power supply 3 drawers + opening cabinet. Keyboard drawer. Electronic light control (luminous intensity). Ijdpjz N Sifjfx Agyeih

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Maximum turning diameter: 465 mm Maximum swing diameter: 680 mm Control system: Siemens Travel range X-axis: 300 mm Travel range Z-axis: 1,050 mm Turning length: 1,050 mm Isdpfx Aez Ri U Isgyeih Maximum spindle speed: 3,250 rpm Spindle bore: 76 mm Includes driven tools Number of positions in the tool turret: 12 stations Chuck diameter: 250 mm Maximum workpiece weight between centers: approx. 350 kg

Condition: used, Year of construction: 2015, functionality: fully functional, NAKAMURA NTJ-100, CNC turning and milling center with FANUC 31i-B control • C-axis on the left spindle • C-axis on the right spindle • Milling drive on the upper turret • Milling drive on the lower turret • B-axis on the upper turret +/-91° • Y-axis +/- 40 mm on the upper turret • Y-axis +/- 32.5 mm on the lower turret • Bar capacity left 42mm A2-5, 6000 rpm • Bar capacity right 42 mm A2-5, 6000 rpm • 12/24 + 6 stations under 45° turret, top • 12/24 stations turret, bottom • 90° inclined bed • Interface for bar loader magazine, Hommel • Air blow-out, right spindle • Drive power left, FANUC AC11/7.5kW • Drive power right, FANUC AC 11/7.5KW • Chuck pressure monitoring, right and left • 19" touch monitor • Door lock • Clamping force control • Helical interpolation • NT-Nurse 2 • NT-Work navigator • Feed rate and rapid traverse adjustment switch • Transformer • CE marking • Memory capacity 2560 meters • Tool offset memory 99 items • Program management 2000 programs • Extended editor function • Background editor • Macro B • Direct input of drawing dimensions • G52-G59 • Polar coordinate interpolation • Cylindrical interpolation • Current documentation • Machine color RAL 9002, light gray • Door color RAL 7011, iron gray • Chip conveyor RAL 7024, graphite gray Iiodpfsz Iy Urox Agyeh Machine options NTJ-100 Air and coolant blow-out through the right spindle Ø 65mm NTJ-100 Chuck blow-out, left spindle NTJ-100 Intelligent handwheel NTJ-100 Polygon turning function Manual tool probe, removable for left and right Workpiece unloading NTJ-100 Unloading with gripper hand on the upper turret for parts up to Ø 65 mm x length 150 mm / 3.0 kg NTJ-100 Material collection tray type A with enclosed collection box, left, for material remnants and finished part ejection, part size up to spindle bore 65 mm NTJ-100 enlarged main spindle, left, Ø 65 mm, spindle nose A6 NTJ-100 enlarged counter spindle, right, Ø 65 mm, spindle nose A6 Chip disposal Hinged belt chip conveyor for NTJ-100, discharge right. Manufacturer: AME. Color: RAL 7024. Motor right, in the direction of travel.

Condition: good (used), Year of construction: 2006, functionality: fully functional, Technical details turning diameter 660/275 mm turning length 1498 mm Iiedszr Hgxepfx Agyoh control Fanuc/Mori Seiki MSX 701 total power requirement 90 kVA weight of the machine ca. 26,6 t dimensions of the machine ca. 5301 x 2997 x 2788 mm Additional information 9-axis CNC turning and milling centre * Fanuc MSX-701 CNC control * Milling spindle at top (B axis), as full 4th axis, positioning 0.0001 deg. * 40-position tool magazine * 10-position turret at bottom, all positions driven * 2 x 3-jaw quick-change chuck KNCS-N 315/91 * KNOLL high-pressure coolant system, pressure setting 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter system * Chip conveyor * Drain system for main spindle chuck (controlled via M function) * Drain system for tool cutting edge (controlled via M function) * Coolant gun incl. accessories * Oil mist extraction * Direct measuring system X1, X2, Y-axis * Bar loader interface * Double foot switch for both spindles * Islands and pocket programming for MAPPS * High-speed fixed cycle for MAPPS * Programm memory extension to 8 MB * Programm restart * 3-stage signal lamp * 512 MB memory card (CF card) Swing diameter over cross slide (tool spindle 1): 750 mm Swing diameter over cross slide (turret 2): 400 mm Max. turning diameter (tool spindle 1): 660 mm Max. turning diameter (turret 2): 275 mm Max. machined workpiece length: 1498 mm Max. bar material: 90 mm Travels: X1 axis (tool spindle): 750 mm Y axis (tool spindle): 420 (+/- 210) mm Z1 axis (tool spindle): 1635 + 100 mm for tool change B axis (tool spindle): +/- 120 deg., full B-axis 1 deg. indexed and 0.0001 deg. braked X2 axis (turret): 195 mm Z2 axis (turret): 1525 mm SZ axis (subspindle): 1610 mm Rapid traverse: (X1,Z1) 50 m/min. / (Y,X2,Z2,SZ) 30 m/min. Main and subspindle: Spindle speeds infinitely variable (spindle 1 + 2): 30-3000 rpm. C axis (spindle 1 + 2): 0.001 deg. Main spindle motor: 22/18.5 kW Subspindle motor: 22/18.5 kW Torque (spindle 1 + 2): 1000 Nm Disc turret: Number of tool positions: 10 Speed of driven tools: 6000 rpm. Drive power: 5.5/3.7 kW Milling spindle head: Tool holder: HSK A63 Max. speed: 12,000 rpm Drive power: 18.5/11 kW Torque: 120/44 Nm Tool changer: 40-stations Tool diameter 70/140 mm Tool length 400 mm Tool weight 8/10 kg Total power requirement 90 kVA Main dimensions Length x width x height 5301 x 2997 x 2788 mm Machine weight 26.6 t Accessories: Measuring arm (picture) tool measurement in machine Tool holder + box, reduction sleeves, driven tools Clamping jaws package Collets package

Year of construction: 2007, condition: used, X-axis: 260mm, Y-axis: 100mm (±50mm), Z1-/Z2-axis: 800/800mm, swing diameter over bed: 660mm, swing diameter over cross slide: 540mm, distance between spindle noses: 1050mm, max. turning diameter: 500mm, max. workpiece length: 1000mm, max. bar capacity: 65mm, spindle speed: 0-5,000rpm, torque: 25Nm, drive power: 6.7kW, number of driven tools: 12, number of tool stations: 12, shank diameter for boring bars: 40mm, tool change time: 0.7s, speed range of driven tools: 0-12,000rpm, torque of driven tools: 30Nm, drive power of driven tools: 10kW, compressed air connection: 6bar, connected load: 40kVA, control: Sinumerik 810D PCU20, length: 3320mm, width: 2070mm, height: 2341mm, total weight: 8.45t, operating hours: 89,129h, with documentation and service reports, regularly maintained. An on-site inspection is possible. Iedpfx Agsz Sr Nwjyoih

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Equipment: documentation/manual, We are offering a complete, integrated robotic CNC turning cell consisting of two DOOSAN vertical CNC turning centers and one KAWASAKI ZX-165U industrial robot. The machines and robot are exceptionally well preserved, regularly maintained and currently operating in our production facility in a two-shift environment. The robotic cell enables automated workpiece handling, loading and unloading between the CNC machines. This is an opportunity to acquire an existing production automation system rather than sourcing individual machines and commissioning a new integration. 1. Complete cell – Included equipment • 1 × DOOSAN VT450TM-2SP CNC turning center • 1 × DOOSAN VT750TM-2SP CNC turning center • 1 × KAWASAKI ZX-165U industrial robot and robot control cabinet • Installed robot gripper / workpiece handling equipment • Safety fencing and protective enclosure • Robot-to-machine communication interfaces • Associated electrical and pneumatic automation components • Workpiece handling / storage stations and chip conveyors 2. Condition, inspection and advantages Both CNC machines and the Kawasaki robot are fully operational, regularly maintained and currently used in our manufacturing facility in Slovenia. The complete cell can be inspected under power and demonstrated during production by prior appointment. • Complete, existing robotic CNC turning solution • Two heavy-duty Doosan vertical turning centers with FANUC CNC controls • Driven tools and C-axis on both machines • Automated workpiece handling and reduced manual intervention • Excellent condition; regularly maintained • Live inspection and test run available 3. Typical applications Iodpez Rqqqjfx Agyeih Automated machining of flanges, bearing rings, gear components, housings, brake discs, large rotational components and other medium- to heavy-duty industrial workpieces, including steel and cast-iron parts. 4. Sales information The complete robotic cell is offered for sale as one integrated system. Additional photographs, video and technical information are available upon request. Inspection and test run by appointment

Condition: excellent (used), Year of construction: 2010, Turning diameter 376mm, turning length 760mm, bar capacity 76mm, Y axis -/+ 52.5mm, C axis 0.001 degrees, 12 station turret , 22KW Motor, Main spindle 4,000 rpm, sub-spindle 4,500 rpm, Iiedpsz Rzzajfx Agysh 3 jaw chuck, parts catcher, toolsetter,

Condition: used, Year of construction: 2010, bar material dia. 20 mm spindle passage 24 mm turning length 350 mm turning speeds 10.000 U/min Iedpfx Agozrh Ecsysih Control CNC Siemens 840Di/Yaskawa c-axis 0,01° ° gripping station 20 mm speeds 10.000 U/min c-axis 0,01° ° rapid traverse 20 m/min turret (x-stations) 3 x 8 + (3x Y-Achse) total power requirement 5,5 kW weight of the machine ca. 4.850 t dimensions of the machine ca. 3,2 x 1,75 x 1,9 +FMB m CNC sliding headstock automatic lathe Star ECAS 20T (12 axes) with 2 spindles, 3 turrets and barloader FMB.

Condition: good (used), Year of construction: 2013, 230mm Swing, 230mm Max Turned Diameter, 230mm maximum turning length, 12 + 12 Station Turrets, Iiodez Sqcvjpfx Agyoh 65mm Bar Capacity, 5000rpm 15KW Main Spindle, Fanuc 31i Control, C Axis to both Spindles, 5000rpm Sub Spindle, +/-50mm Y axis, coolant, swarf conveyor, tool setter, parts catcher, Magazine Bar-feed.

Condition: like new (used), Year of construction: 2022, Manufacturer: SPINNER Model: TC600 65MC Year of manufacture: 2022 Control system: FANUC Series 32i-MODEL B Programming: FANUC Manual Guide i Tool interface: VDI30 Approx. 500 operating hours Machining area Max. swing diameter: 600 mm Max. turning diameter: 400 mm Max. turning length: 650 mm Bar capacity: 65 mm Travel distances X-axis: 275 mm Z-axis: 700 mm Rapid traverse X: 15 m/min Rapid traverse Z: 24 m/min Main spindle Max. speed: 4,000 rpm (optional 5,000 rpm) Spindle power: 21 / 27 kW Torque: 201 / 258 Nm Spindle nose: A8 / DIN Standard chuck size: 250 mm Tool turret Ijdpfx Ajz R Na Sjgyeih 16 tool stations VDI30 tool interface Driven tools Max. speed for driven tools: 6,000 rpm C-axis available Tailstock NC tailstock MK4 mount Tailstock stroke: 570 mm Traveling center Included in the delivery: - Extensive selection of collets in various sizes - Numerous VDI30 tool holders - Static and driven tool holders - Collet chuck system - Additional SMW-AUTOBLOK 210 BB chuck - Various clamping jaws and clamping devices - Traveling center MK4 - Additional tools and accessories as shown in the pictures

Condition: good (used), Year of construction: 2009, functionality: fully functional, turning length: 1,500 mm, turning diameter: 550 mm, spindle motor power: 22,000 W, spindle speed (min.): 3,800 rpm, spindle bore: 80 mm, power: 22 kW (29.91 HP), Equipment: rotational speed infinitely variable, Okuma Macturn 350 2SW-1500 Big Bore main spindle, machine type CNC turning-milling center Make / manufacturer Okuma Okuma Model / type MacTurn 350 2SW1500 BigBore Year of manufacture 2008 / 2009 Control OSP P 200 L IGF One Touch Advanced + CAS Spindle turning time 6437 h Technical data Max. turning diameter: 550 mm Max. turning length: 1,500 mm Travel path of upper turret (milling spindle): X-axis: 505 mm/190 mm/1670 mm Y-axis: 190 mm (+95 /-95) Iiodpfx Agjvta Rdoyoh Z-axis: 1670 mm W-axis: 1680 mm Travel path of lower turret: X/Z 210 mm/ 1670 mm Main spindle “Big Bore” version Spindle motor main spindle 22 kW, 412 Nm Max. speed main spindle 3800 rpm Spindle nose main spindle JIS A2-8 Spindle passage 80 mm Max. bar diameter: 71 mm C-axis 0.001 ° Counter spindle “Super Big Bore” version Spindle motor counter spindle 22 kW, 412 Nm Max. speed counter spindle 3300 rpm Spindle end counter spindle JIS A2-8 Spindle passage 80 mm Max. bar diameter: 71 mm Milling spindle Spindle motor milling spindle: 11 kW Max. speed milling spindle: 12000 rpm Tool holder: HSK 63 B-axis: 0.001° Tool magazine: 44 stations Lower turret Tool positions: 12 Tool holder: VDI-40, Driven tool stations: 12 positions Max. power of driven tools: 7.5 kW Max. speed of driven tools 4500 rpm Machine weight: approx. 15,000 kg Space requirement 6000 x 3500 x 3000 cm Other features - High pressure cooling 40 bar - Chip conveyor Interlit ISF 614 - Heavy crane filter Interlit SBP 4 - Touch Setter - Helical Cutting - 4 Extra M-Code Set - 2x hydraulic power chuck SMW BH-D 315-95 diam. 250 mm - DNC- T1 interface - RS 232 C interface - Chuck blow-off function main counter spindle - TAS -S + TAC-C Status report after commissioning in Bergisch Gladbach Geometry measurement results Reverse play XA - axis 0.015 mm Reverse play XB - axis 0.015 mm Reverse play ZA - axis 0.020 mm Reverse play ZB - axis 0.020 mm Reverse play Y - axis 0.010 mm XA - axis measured with measuring mandrel at 300 mm 0.02, YA at 300 mm 0.007in T1,T2, T3 B-axis: alignment and function good M-drive lower turret: tested and good Milling spindle: tested up to 6000 rpm, no abnormalities Main/counter spindle tested , no abnormalities High pressure pumps function well, no abnormalities Accessories - 2 x hydraulic crane chuck SMW - pallet with 16 driven tool holders, 10 HSK 63 holders, 3 VDI 40 holders - lifting hook on the front - all original axle locks Neff The Okuma specialist and NeffBuy We are also happy to provide you with the all-round carefree package, a tour of our showroom including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as instruction and subsequent service. We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit us on our homepage.