Used Piston Kompresor for sale (1,893)

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 2 h, functionality: fully functional, machine/vehicle number: 002331512500001478, pressure (max.): 14 bar, REKO H 510/150 piston compressor incl. operating hours counter incl. 150 litre compressed air tank Hours: 6.00 Bh Year: 2025 Maximum pressure: 14 bar Flow rate (14 bar): 500 l/min Nominal power: 4.0 kW Cylinder : 2 Hjdpfxoypm Sde Airjw Mains voltage: 400 V Compressor speed: 785 min-1 Compressed air tank: 150 liters Dimensions: 1345 x 457 x 1112 mm Weight: 135 kg We always have a wide range of new and used compressors in stock!

Condition: used, functionality: unexamined, Compressed Air System Atlas Copco Consisting of: Compressor GA18 Plus, year of manufacture 2007 Compressor GA11VSD+FF, year of manufacture 2017 Control unit ES 6 Incl. 1000 l air receiver GA11VSD+FF, year 2017, operating hours: approx. 20,000 GA18 PLUS, year 2007, operating hours: approx. 58,000 Hodpfx Aiovx Nmfsrjw Buyer is responsible for professional dismantling. Forklift is provided.

Condition: used, Year of construction: 2002, Technical details: pressure capacity: 10 bar tank: 350 l motor: 2 x 2,2 kW volume capacity: 2 x 275 L/min weight: 555 kg total power requirement: 2,2 kW dimensions L x W x H: Kompressor: 2,7 x 1,0 x 1,55 m pressure vessel: Größe: L:2,4 x Ø 450 m compressor is free of oil and with noise reducer insulation consists of : 2 compressor - each 3 cylinder Hjdeu Nz Sljpfx Airew Besteht aus: Air pressure tank: - Make Mehrer - Permissible operating pressure 11 bar - YOM 1995 Exhaust air over 1 1/2 "reduced to 1", hose connection Ø 14 x 27 mm with shut-off valve Operation via control panel Permissible operating temperature 50 ° C i.D. *

Condition: good (used), Year of construction: 1982, Piston compressor Manufacturer: BOGE Type: SB m770 Year: 1982 Max. pressure: 15 bar Tank: 500L. Low operating hours. Hsdpfx Aoxq Tlxsirow

Condition: used, Abel Piston Diaphragm High-Pressure Pump as Feed Pump, used Model: TH-G332-200/2 Features: including drive unit Description: Robust and high-performance industrial piston diaphragm pump. This unit is ideally suited for demanding conveying tasks such as slurries, suspensions, or abrasive media. Manufacturer: ABEL Year of manufacture: 1993 Flow rate: approx. 30 m³/h Operating pressure: up to 1.5 MPa Motor power: 15–18.5 kW Stroke rate: approx. 50 min⁻¹ Stroke length: 150 mm Equipment: Electric motor with drive unit, - Pulsation damper / pressure vessel - Piping & valves - Lubrication unit - Completely mounted on base frame Condition: used, tested (see inspection sticker) Applications: industry, mining and mineral processing, tunneling, chemical, wastewater treatment Availability: immediately ex stock, inspection by appointment possible Hsdpfx Aey Exqleirsw

Year of construction: 2023, condition: new, Unused item! Variable displacement pump, axial piston with swash plate design, for hydrostatic drives in open circuit. The new price was EUR 14,000.00 net. Mannesmann Rexroth replica, new part. The flow rate is proportional to the drive speed and displacement and can be infinitely adjusted at constant drive speed. Manufacturer: Zhen Yuan Model: A7VO355DR/63R-VPH02 Year of manufacture: 2023 Nominal size: 0-355 cm³ Control device: pressure regulator Displacement: 355 cm³ Max. speed: 1320 Hsdozt Iq Uspfx Airow

Condition: like new (used), TECHMI 10-Piston Automatic Filler – Stainless Steel TECHMI automatic filler with 10 pistons, designed for precise and continuous dosing and filling of liquid, semi-liquid, and viscous products in industrial production lines. The machine is equipped with 10 pistons/filling nozzles, allowing multiple containers to be filled simultaneously in each production cycle, offering an efficient solution for medium to high production industrial processes. Primarily manufactured in stainless steel, it incorporates an in-line container conveyor, a protected filling area, and a control panel for the operator. MAIN FEATURES -Manufacturer: TECHMI -Type: Automatic piston filler -Number of filling pistons: 10 -Multi-nozzle configuration -Automatic volumetric filling system -Simultaneous dosing of multiple containers -Integrated container conveyor -Automatic positioning under the nozzles -Stainless steel construction -Closed filling area with safety guards -Integrated control panel / HMI -Adjustable filling system -Designed for continuous industrial production -Integrable into automatic filling and packaging lines APPLICATION The TECHMI filler is designed for automatic volumetric dosing using a 10-piston system. The containers are automatically transported to the filling area and positioned under the nozzles. The piston system dispenses a controlled amount of product into several containers simultaneously before transferring them to the next stage of the line. The piston filling technology is particularly suitable for products that require controlled volumetric dosing, including products with higher viscosity or consistency than those typically processed by gravity filling systems. It can be integrated with: Container feeding systems Bottle and jar conveyors Capping and sealing machines Cap feeders Weight checkers Metal detectors and inspection equipment Labeling and coding equipment Stacking and end-of-line systems APPLICATIONS A solution especially suitable for food manufacturers, sauce and condiment producers, canning companies, and packaging companies that require an automatic multi-head volumetric filling system. Depending on its configuration, it can work with sauces, creams, purees, pastes, jams, tomato-based products, condiments, and other liquid or viscous products. Hedszwwa Topfx Airjw The 10-piston configuration allows for the simultaneous filling of multiple containers, making it particularly interesting for industrial lines that require automated and repetitive dosing. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Compressor, piston compressor Fiac 500 L Hjdpfx Aezkh Egjirew

Condition: used, Technical specifications: Tank capacity: 500 L Flow rate: 950 l/min Max. pressure: 10 bar Number of pistons: 2 x 2 Power supply: 400 V Engine speed: 2800 rpm Engine power: 2 x 5.5 kW Overall dimensions: Length: 2100 mm Hodpfszvmrijx Airsw Width: 600 mm Height: 1300 mm

Condition: used, Machine: Rotary piston pump 10.000 ltr/h cooled Hodez Ri Tkjpfx Airow

Condition: used, Year of construction: 2010, Technical data Manufacturer / model: C.M.E. S.r.l., Ideal I360 / type 1360 Serial number / year: Flow rate / operating pressure: 36 m³/h at 3 bar Maximum pressure: 4 bar Motor power / speed: 5.5 kW / 2,900 rpm Dimensions (L × W × H): 1,350 × 730 × 960 mm Weight: approx. 325 kg Connections: DIN 65 according to DIN 11851 Product-contact materials: AISI 316 stainless steel and NBR elastomers Hsdpfx Aisz R Dhvjrjw Suitable media: wine, destemmed grapes, must, vinegar, oil, juices, and fruit/vegetable pulp Maximum fluid temperature: approx. 70 °C Performance curves: not available Spare parts: see the operating and maintenance manual with spare-parts catalogue Machine-specific operating data according to C.M.E.; dimensions according to the “Ideal 360” manual.

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: API629410, Technical characteristics: Core Specifications Attribute Value Motor Power: 55 kW (75 hp) Maximum Working Pressure: 7.5 bar Free Air Delivery (FAD): approx. 174.4 l/s (approx. 369 CFM) Cooling Type: Air-cooled Noise Level: approx. 67 dB(A) Drive Type: Gear-driven Integrated Dryer: Yes (Full Feature “FF” version) Electrical Supply: 400V / 50Hz Regulation System: Full load / no load with Elektronikon® controller Dimensions (L×W×H): approx. 1656 × 1100 × 1968 mm Weight: approx. 1100 kg Design & Features: - Sound-attenuating enclosure: Steel canopy with flame-retardant insulation for quiet operation. - Elektronikon® Controller: 3.5” color display with programmable pressure bands, remote monitoring, and auto-restart capability. Hjdpfx Aieyam Nqorsw - Zero-loss condensate drain: Integrated into the dryer for efficient moisture removal without wasting compressed air. - Integrated moisture separator: Labyrinth-style, built into the aftercooler for enhanced air quality. - IP55-rated motor: Dust and water-resistant, suitable for industrial environments. Reliability & Maintenance: - Synthetic oil: Rated for 8,000-hour change intervals. - Spin-on oil filter: With integrated bypass valve for easy servicing. - ASME-approved air/oil separator: For long service life and minimal oil carryover. Machine status: WORKING

Condition: new, Year of construction: 2025, machine/vehicle number: 10027619, Piston compressor with intake capacity of 620 l/min, Hjdpfx Aewgcb Doirsw delivery capacity at 6 bar of approx. 520 l/min, maximum pressure of 10 bar, tank capacity of 270 l, 2 cylinders with 2 stages, speed of 920 rpm, 400 Volt, 50 Hz, 4 kW motor with Condor pressure switch and pressure gauge, including pre-filter, desiccant dryer (230 Volt), automatic tank drain (230 V), and oil/water separator, bolted onto a safety base pallet with rubber vibration dampers, immediately available, Ex Works, from the Seevetal location, excluding transport, subject to prior sale.

Condition: like new (used), Year of construction: 2017, machine/vehicle number: HMD-G-80-1000, I have a nearly new, immediately available Abel piston diaphragm pump for sale, type HMD-G-80-1000, cast iron construction, manufactured in 2017, recently completely overhauled and repainted, maximum flow rate 70 m³/h, maximum pressure 15 bar, 30 kW engine, complete with new control cabinet, frequency converter, and pressure sensor. Ideally suited for long 1200 or 1500 mm chamber filter presses. Located in 58762 Altena, Germany. Just set it up, plug it in, and let it run… Hsdpfxsyxxmgj Airew

Condition: new, Year of construction: 2023, operating hours: 150 h, Used Kaeser Booster Compressor N253-G (9/40) without start control / star-delta connection Year of Manufacture: 2023 Operating Hours: 150 hrs Equipment - Compressed air aftercooler design: finned-tube type - Oil supply: via oil pump - Oil pressure monitoring - Oil pressure and discharge temperature indication Technical Data Inlet pressure: 9 bar(g) Final pressure: 40 bar(g) Capacity at 40 bar: 1.74 m³/min Minimum ambient temperature: 2 °C Maximum ambient temperature: 40 °C Compressor block speed: 1,135 rpm Number of cylinders: 2 Drive motor rated power: 11.0 kW Motor efficiency class: IE3 Motor protection class: IP55 Electrical supply: 400 V / 3 Ph / 50 Hz Sound pressure level: 76 dB(A) Compressed air inlet connection: G 3/4" Compressed air outlet connection: G 1/2" Hodpfxjzaaqzs Airjw Visit our always have a large selection of new and used compressors in stock!

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: API628950, Technical characteristics: Core Specifications Attribute Value Motor Power 90 kW (approx. 125 hp) Max Operating Pressure 8.6 bar to 13 bar (125–188 psi) Free Air Delivery (FAD) ~565–588 CFM; 125 psi Cooling Type Air-cooled Noise Level ~74 dB(A) Drive Type Direct drive Integrated Dryer Yes (Full Feature “FF” version) Voltage 400V / 50Hz or 460V / 60Hz Dimensions (L×W×H) ~2179 × 1300 × 1968 mm Weight ~1500 kg Hjdpsyam Tcjfx Airjw Performance & Features - Elektronikon® Touch Controller: Advanced microprocessor for monitoring, control, and remote access. - RDX Synthetic Oil: Long-life lubrication for reduced maintenance. - Energy Efficiency: Specific power as low as 18.9 kW/100 CFM, depending on load. - Integrated Refrigerated Dryer: Ensures clean, dry air with minimal pressure drop. - Oil-Water Separator: Built-in for environmental compliance and air purity. Reliability & Maintenance - IP55-rated motor: Dust and water-resistant for harsh environments. - No-loss condensate drain: Prevents compressed air waste and reduces downtime. - Sound-insulated bodywork: Minimizes noise and vibration. Machine status: WORKING

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 2 h, pressure (max.): 14 bar, REKO H 510/150 piston compressor incl. operating hours counter incl. 150 litre compressed air tank Hours: 2.00 Bh Year: 2024 Maximum pressure: 14 bar Flow rate (12 bar): 360 l/min Nominal power: 3.0 kW Mains voltage: 400 V Compressor speed: 1200 min-1 Compressed air tank: 150 liters Dimensions: 1345 x 457 x 1054 mm Hedpfovr Eicsx Airew Weight: 115 kg We always have a wide range of new and used compressors in stock!

Condition: good (used), Year of construction: 2024, machine/vehicle number: 20660471, Offer 24143 Technical data: - Vertical version - Max. operating pressure 15 bar - Fully galvanized pressure tank / boiler - Pressure tank capacity 270 l - Suction volume 500 l/min - Delivery volume 470 l/min - Compressor speed 940 rpm - Cylinder stages 2 - 2 - Drive 400 V / 4.0 kW Hjdpfxotx T Ans Airjw - Pressure gauge - 3 swing feet - Boiler diameter approx. 600 mm - Space requirement approx. W 800 x H 1850 x D 800 mm - Weight approx. 240 kg

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, KAESER PREMIUM CAR 250/30 reciprocating compressor with a 30L tank Technical specifications: power supply - 230 V motor power 1.25 kW effective capacity: 250 l/min Hodpfx Aezmwaroirew maximum pressure 10 bar compressor in perfect working order net price: 1900 PLN gross price: 2337 PLN

Condition: good (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 2019-21130, overall weight: 1,950 kg, pressure (max.): 300 bar, Equipment: type plate available, AIRCO PSAL 15 SN – Nitrogen generation system (PSA nitrogen generator), year of manufacture 2019, serial number 2019-21130. Manufacturer: AIRCO Systems GmbH, Frankfurt. Complete, turnkey PSA system for on-site nitrogen (N₂) generation – for example, for laser cutting machines, packaging, or process engineering. Equipped with an integrated AIRCO/Bauer MINI-VERTICUS high-pressure booster, control cabinet “NITROGEN N₂”, buffer tanks, and piping station. Technical data: – Type PSAL 15 SN (INMATEC technology) Hodpfezlat Eex Airsw – Max. pressure 300 bar – Weight approx. 1,950 kg – Year of manufacture 2019, low operating hours, serviced (AIRCO Systems service) Operates on electricity – Inspection with demonstration possible by appointment. Maintenance documentation available upon request. Dismantling/loading to be carried out by the buyer or by agreement. Payment before collection. Sale as is, excluding warranty. Export possible. Please include a call-back number with your inquiry.

Year of construction: 2017, condition: excellent (used), Stationary piston compressor with a 500 L tank Air outlet: ¾" Dimensions and weights Length (product) approx.: 2020 mm Width/Depth (product) approx.: 570 mm Height (product) approx.: 1340 mm Weight (net) approx.: 245 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Output power: 5.5 kW Input power: 6.52 kW Noise emission Sound pressure level Lp: 83 dB(A) Explanation of sound pressure level: Sound pressure level at a distance of 1 m according to DIN 45635 T 13 Compressor Compression system: HOS Intake capacity approx.: 950 l/min Delivery capacity approx.: 750 l/min Explanation of delivery capacity: at 6 bar working pressure Number of cylinders: 2 Number of compression stages: 2 Compressor speed: 960 min⁻¹ Compressed air tank Maximum pressure: 10 bar Tank capacity: 500 l Hedpjlczl Uofx Airow Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: used, Scheugenpflug DOS P016 Piston Dispenser DOS P Piston Dispensing System for a wide range of requirements The piston dispensing systems from Scheugenpflug operate according to the principle of volumetric dispensing, meaning the dispensed amount of material is mechanically determined by the geometry and stroke of the associated cylinders. The cylinder is filled with the potting material via a corresponding material feed system. When a two-component medium is used, the volume of the two cylinders simultaneously determines the ratio of the resin and hardener components to each other. The dispensing pistons push the two components in separate channels simultaneously towards the outlet valve, where they first mix into a homogeneous reactive medium in the static mixing tube. The DOS P016 / TCA piston dispensing systems are highly precise volumetric dispensing systems designed for processing 1K and 2K materials and cover a wide range of requirements. Precisely dimensioned dispensing cylinders enable the application of reproducible material volumes. In the case of 2K materials, the parallel emptying of both cylinders into the common mixing tube creates a consistently constant mixing ratio, ensuring maximum process reliability. At the same time, pressure-, moisture- or shear-sensitive potting media can also be processed gently without any changes to the material being feared. Users also benefit from simple and quick maintenance, long service life and considerably reduced maintenance costs. With optional features such as valve monitoring, mixing tube heating or dispensing head heating, these systems can be flexibly adapted to the respective task. Your advantages No dependence of dispensing accuracy on temperature, pressure or viscosity Consistently constant mixing ratio at all times due to parallel emptying of the dispensing cylinders Wide range of applications (material and application-related) Important functions Simultaneous actuation of the cylinders by a common stroke mechanism enables a homogeneous mixing ratio Sensory monitoring of the inlet and outlet valves as well as the cylinder filling Temperature control of the material by mixing tube heating (optional) Dispensing needle monitoring with camera (optional) Product data General Materials: 1K and 2K Viscosity: From liquid to highly viscous Fillers: Filled and/or abrasive media Operating principle: Volumetric dispensing Properties Constant mixing ratio for 2K Independent of temperature, material feed pressure and viscosity of the casting resin Precisely reproducible and highly accurate results Maximum process reliability Application Filling potting, sealing, bonding, application of thermally conductive materials, encapsulation (glob top) DOS P016 Max. volume/shot 2K at ratio 1:1 1K: 0.06/17 ml 2K: 0.1/32 ml Dispensing speed max. 1 [ml/s]: 2 Dispensing accuracy at max. stroke [%]: < 0.5 Heatable up to max. 2 [°C]: 80 Outlets: 1K: 1-4, 6, 8 2K: 1-4 Weight: 14 kg Dimensions (W x H x D) Hsdpfx Aezc Nplsirjw 290 x 350 x 230 mm Video on the mode of operation "Everything from one source: We will gladly offer you suitable financing for your project." You can find more dispensers - new and used - in our shop! International shipping costs on request!

Condition: new, machine/vehicle number: 691340002, hoku 119-90 – 2-stage, compression-enhancing, mobile piston compressor The universal model with V-belt drive and high-quality components, specifically designed for tradespeople, for use in environments where the quality of compressed air, as well as durability and efficiency, are essential. Long service life thanks to high-performance units with low speeds, safe transport and excellent stability thanks to large wheels with parking brake, optimal cooling through a large fan wheel, an aftercooler with cooling fins ensures a low tank inlet temperature and thus less moisture in the compressed air, improved efficiency through optimized units, comes standard with a Condor pressure switch, pressure gauge, pressure regulator with water separator and quick-release coupling, motor with overload protection. Technical data: Intake capacity 674 l/min, delivery capacity 505 l/min, maximum pressure 10 bar, Hedpfx Aisvl Ev Aorew tank capacity 90 l, cylinders/stages 2/2, speed 920 min-1, motor power 4 kW / 400 V Ex works, from the Seevetal location, without transport, as inspected, subject to prior sale.

Condition: good (used), Schneider Compressor 670-270 ST used, including refrigerant dryer Hedpfxjzzclps Airjw Tank volume 270 liters Suction capacity 670 liters/min Delivery capacity approx. 515 liters/min Maximum pressure 10 bar Speed 1030 1/min Motor power 4.0 kW / 400V Dimensions: W x D x H 850 x 830 x 1800 mm Weight: approx. 160 kg

Condition: excellent (used), Year of construction: 2012, operating hours: 2,80,000 h, functionality: fully functional, power: 45 kW (61.18 HP), fuel type: electric, Complete service history from Atlas Copco. Includes tank. Hsdpfx Ae Afy Uaoirew