Used Piston Kompresor for sale (1,855)

Year of construction: 2006, condition: good (used), machine/vehicle number: 3437/07, used oilfree dental piston compressor medicom Cattani 3 cyl with soundproof hood with 75 liter compressed air tank with air filter Year: 2006 good condition Isdpfx Adelu D Spjletl Technical specifications: Motor power: 1.5 kW Delivery rate 238 l / min (5 bar) Pressure max: 10 bar Sound pressure level: 65,3 dB (A) L x D x H: 780 mm x 740 mm x 1080 mm We always have a large selection of new and used compressors in stock! Immediately available.

Condition: good (used), Year of construction: 2012, functionality: fully functional, power: 22 kW (29.91 HP), volume flow: 66 m³/h, operating pressure: 120 bar, type of cooling: air, Equipment: documentation/manual, type plate available, 1 high-pressure piston compressor including acoustic hood and 1500 liter compressed air tank Ran trouble-free until the entire production was shut down. Manufacturer: J.A. Becker & Söhne Type: SV 1101/120 Number of cylinders: 3 Number of pressure stages: 3 Volume flow: 66m³/hour Compression pressure: 120 bar Drive power: 22 KW Speed: 1457 rpm Year of construction: 1998 Itjdpfxovgrp So Adljl Compressed air tank Manufacturer: FMS Capacity: 1500 liters Operating pressure: 120 bar Year of construction: 1998 Product data sheet as PDF attached under the ad description !!!

Year of construction: 2013, condition: used, machine/vehicle number: 10074, System: piston diaphragm pump Itjdpfx Adjdkdi Nslel Manufacturer: Abel Type: CM G E272 Manufacturer no.: 10074 Construction year: 2013 Performance: 15 m3/h Pressure: 1.00 MPa Motor: 7,5 kW, 50 Hz

Condition: used, Year of construction: 1977, Mobile excavator Manufacturer: Liebherr Type: A 921 C Year of manufacture: 1977 Weight / operating weight: approx. 18,000 kg Engine oil and oil filter changed - All diesel filters changed Itjdpfxjzrzyme Adlel - Diesel tank cleaned and recoated - Hydraulic oil changed - Air filter changed - Excavator lubricated - 2 new batteries - Operating hours approx. 10,300 hours - Tires approx. 70 %. - Excavator bucket width approx. 1.2 m - Excavator fully functional Transport length: approx. 8.50 – 9.00 m Transport width: approx. 2.48 – 2.50 m Height (above cab): approx. 3.15 – 3.20 m Engine & Drive Engine type: Deutz F6L 912 (air-cooled 6-cylinder naturally aspirated diesel) Power: approx. 100 – 106 hp (70 – 78 kW) at 2,300 rpm Displacement: 5.6 liters (5,652 cm³) Cooling system: Air cooling (very low maintenance, ideal for cold starts) Maximum speed: approx. 20 km/h (Hydrostatic drive with step-wise control) Hydraulics & Working Equipment Hydraulic system: Hydromatik axial piston pumps with performance-regulated sum control Hydraulic oil tank capacity: approx. 270 liters Diesel tank capacity: approx. 228 liters Standard deep bucket volume: approx. 0.60 – 1.00 m³ 9926ä

Condition: used, mileage: 2,66,684 km, power: 130 kW (176.75 HP), first registration: 05/2007, fuel type: diesel, overall weight: 7,490 kg, axle configuration: 2 axles, next inspection (TÜV): 02/2026, color: white, gearing type: mechanical, emission class: euro4, total length: 5,950 mm, total width: 2,460 mm, total height: 2,535 mm, loading space length: 4,033 mm, loading space width: 2,315 mm, loading space height: 402 mm, Year of construction: 2007, Equipment: ABS, * Cab: S (short) * Seats in the cab: Fixed single passenger seat * Seats in the cab: Standard driver's seat with suspension * Immobilizer * Electric windows * Rotating beacon * Electrically adjustable and heated exterior mirrors * Dashboard control panel * Differential lock, rear axle * Suspension: Leaf spring / Leaf spring * 6-speed gearbox - Type: G 56-6 * Engine 4.3 L - 130 kW Diesel (OM 904 LA) * Engine brake with constant throttle * Auxiliary drive MB 1C * Hydraulic pump (Meiller pump - 5 pistons - 254 / 1) * Disc brakes * Pintle hook coupling * Ball hitch coupling * Hydraulic connection for tipper trailer * Tire dimension front axle: 235/75R17.5 * Tire dimension rear axle: 235/75R17.5 * Fuel tank: 105 liters * Technically permissible total weight: 7490 kg * Unladen weight: 4490 kg * Permissible trailer load: 11200 kg * Overall length: 5950 * Wheelbase: 3020 mm * Next inspection due: / * Vehicle number/Vehicle: 12190 * Errors and prior sale excepted * Advertisements and various lettering have been digitally removed. Isdozh Duljpfx Adljtl * We will gladly assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge: * Trade-in of your old vehicle * TÜV/SP inspection * Complete export processing * Arranging financing * Applying for export license plates * Vehicle delivery * Vehicle registration * Recovery and vehicle transport * YOUR VTS TEAM

Year of construction: 2021, condition: new, machine/vehicle number: MA0134_MAXXI5,5, Demonstration machine: new piston compressor available immediately (Plug and Play): AIRKO MAXXI 5.5 D - 270 - 10 bar with lying 270 liter compressed air tank The compressor has 1 operating hour and is available immediately. 2 cylinders Pressure: 10 bar Rated power: 5.5 kW Delivery quantity at 7 bar: 605 l / min Sound level: 80 dB (A) Compressed air outlet: 1/2 " Dimensions length x width x height: 170 x 56 x 134 cm Weight: 181 kg Itjdpfx Aehu R Aksdlsl Convenient leasing via our house bank possible. Visit our shop. We always have a large selection of new and used compressors in stock! Immediately available.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, plate length 3500mm plate width 1300mm Iodpozxp Swofx Adlotl solid steel plates oil heating with included heater 8 hydraulic pistons pistons diameter 85mm total pressure 160 tons safety line switch year 2002

Year of construction: 2017, condition: used, functionality: fully functional, Gemü 55415D19510 2/2-Way angle seat globe piston valve, pneumatically operated with threaded cast copper. PST 4,8-7 bar 180 C PS 12 bar 4 for sale. 1 piece/55 EUR. Good working condition. Please check out our other listings as well. Ijdpot D Rfisfx Adljtl

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 10380840, clearance between the columns: 640 mm, column diameter: 125 mm, ejector force: 1,50,000 N, ejector stroke: 145 mm, mold height (min.): 300 mm, type of input current: three-phase, input voltage: 400 V, clamping force: 4,200 kN, Horizontal die casting machine Make: Bühler, Model: Evolution B42D, Year: 2004, Serial number: 10380940 Mould height: 300 - 700 mm Mould opening stroke: 640 mm Max. surface pressure: 100 N/mm² Min. clamping plate dimensions: 500 x 500 mm Clear tie bar spacing: 640 x 640 mm Tie bar diameter: 125 mm Ejector stroke: 145 mm Ejector force: 150 kN Itsdpfxeyngv Tj Adlol Max. closing force: 4200 kN Cycle time: 30 s Casting piston speed: 5.0 m/s Incl. die spraying system Gerlieva GS 1200/1400Z Incl. holding furnace Westomat ProDos DPC 900kg Incl. extraction robot ABB IRB 4600 M2004

Condition: excellent (used), Year of construction: 2015, type of input current: three-phase, total height: 2,000 mm, total width: 2,800 mm, total length: 7,500 mm, tank capacity: 900 l, clamping force: 400 kN, Zhenli ZLC400T – 400 Ton Cold Chamber Die Casting Machine For sale is a high-quality Zhenli ZLC400T cold chamber die casting machine for aluminum, manufactured in 2015. The machine has been used sporadically and is in very good technical condition, regularly serviced, and ready for further operation. Key technical parameters: Clamping force: 400 tons (4000 kN) Die closing stroke: 450 mm Ejector force: 220 kN Ejector stroke: 120 mm Platen dimensions: 1120 × 1000 mm Column-to-column clearance: 620 × 620 mm Column diameter: 130 mm Die thickness: 300–800 mm Injection stroke: 570 mm Piston diameters: Ø60 / Ø70 / Ø80 mm Maximum aluminum shot weight: up to 6.9 kg Injection boost force: 480 kN Projected area of casting: 275 / 375 / 490 cm² Chamber collar diameter: 101.6 mm Piston stroke: 220 mm Hydraulic motor power: 22 kW Working pressure: 14 MPa Oil tank: 900 l Machine weight: 17 tons External dimensions: 7.5 × 2.0 × 2.8 m Advantages: ✔ Ideal for the production of medium and large-sized aluminum castings ✔ Stable construction and high rigidity of the clamping system Isdpozcay Iefx Adljtl ✔ Large mounting space for dies ✔ Low degree of wear – the machine has been used sparingly ✔ Ready for operation without additional investment Applications: The machine is perfectly suited for the production of: automotive components, household appliance components, industrial housings, machine and equipment parts, technical aluminum castings. Technical condition: very good The machine can be inspected while in operation.

Year of construction: 1989, condition: good (used), machine/vehicle number: 3506, System: piston diaphragm pump Manufacturer: Abel Type: FDG 322 Machine number: 3506 Iedpfx Adedkdi Ejlotl Year of construction: 1989 Performance: 15 m3 Pressure: 15 bar Engine: BBC, 11 kW, 50 Hz

Condition: ready for operation (used), plate length 3500mm Isdpfjzxy N Tsx Adletl plate width 1300mm water heating 8 hydraulic pistons pistons diameter 85mm plates span 640mm outomatic opening year 1992

Condition: new, Year of construction: 2025, Technical Data: Intake capacity: 510 l/min. Delivery capacity: 400 l/min. Maximum pressure: 10 bar Tank volume: 90 l Cylinder/stages: 2/1 Speed: 1,300 rpm Motor power: 3 kW / 400 V Description: This universal compressor with V-belt drive and high-quality components is specifically designed for tradespeople and is suitable for use in environments where the quality of compressed air, durability, and efficiency are essential. Long service life thanks to high-performance units with low speeds. Safe transport and excellent stability thanks to large wheels with parking brake. Itjdpjhk Dfkjfx Adljl Optimal cooling through a large fan wheel. An aftercooler with cooling fins ensures a low tank inlet temperature, resulting in less moisture in the compressed air. Improved efficiency through optimized units. Standard features include: Condor pressure switch Manometer Pressure regulator with water separator and Rectus quick-release coupling Motor with overload protection Location: In stock at 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2013, operating hours: 11,082 h, Boom type: Monoblock boom Fueling pump: Yes Ground plate width in mm: 500 Service weight: 72400 Emission class: Emission class 3A EPA certification: Yes Complete cab protection: Yes Air conditioning: Yes Stick length: 2600 Machine width in mm: 4200 Engine: Liebherr D 9508 Bulletproof glass: Yes Rear view monitoring with camera: Yes Additional extras: Cab height increase of 800 mm, lifting cylinder with piston rod Central lubrication system: Yes Condition of left track in %: 90 Condition of right track in %: 90 Condition of track roller in %: 80 Condition of undercarriage in %: 90 Condition of idler in %: 80 Visual condition: clearly used - 4 Condition of support wheel in %: 50 Technical condition: Requires repair - 4 Condition of turret in %: 90 Itodpfozx Ntuex Adlel ---- Air conditioning Machine width: 4200 mm Cab height increase: 800 mm Transport height 3700 mm with removed cab and stick

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Vertical piston compressor with sound-dampening hood, DK 600Eco UNM STS 660-10-270 - Year of manufacture: 2013 - With mounted refrigeration dryer, 660 l intake capacity, 520 l delivery rate - 10 bar - Weight 245 kg - Sound-dampening hood - Condensate drain 4 kW, 400 Volt Iedpfjypkr Uox Adlotl - Width 960 mm, Depth 740 mm, Height 1905 mm - Noise level 69 dB (A) - Very few operating hours - ABSOLUTELY LIKE NEW - TÜV inspection valid until August 2026, with corresponding inspection certificates Transportation available for an extra charge!

Condition: used, Double-column hydraulic press SCHÖN, type UTE 100 Special Ijdpfx Adoz A R Irjljtl Special press with additional side press cylinders – vertical and horizontal, each with 100 tons capacity. Machine no. 1800, year of construction 1977 Rebuilt according to UVV standards in 09/1991 by Livenbrück Vertical pressure force: 100 tons Vertical ram stroke: 150 mm Vertical installation height: 375 mm (400 mm) Horizontal pressure force: 100 tons Horizontal ram stroke: 60 mm Horizontal installation width: 600 mm Table surface: 600 x 480 mm Table opening: Ø 100 mm Ram surface: Ø 200 mm (vertical and horizontal) Piston rod: Ø approx. 240 mm (vertical and horizontal) Clamping pin bore: Ø 50 mm Ram stroke: 150 mm Installation height: max. 435 mm Table height above floor: 820 mm Oil tank capacity: approx. 375 liters Motor power: 15 kW Mains connection: 400 volts, 50 Hz - Column guidance via the large piston with anti-rotation device - Stepless press force adjustment - Adjustable pressure holding time for vertical and horizontal - Switching for working movement: vertical only or combined vertical and horizontal - 2-hand operation for stroke release - Control cabinet located on the side, fixed to the machine - Light curtain SICK, type LVU 306, for safety operation Space required for the press L x W x H: 2050 x 1550 x 2230 mm Weight: approx. 5 tons Good condition

Condition: like new (used), Year of construction: 2025, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 1630, overall weight: 7,800 kg, warranty duration: 6 months, power: 85 kW (115.57 HP), Complete production line for sale, based on a Di Più BRIK MB100 briquetting press (complete production line). Fully refurbished DI PIU BRIK MB100 machine (factory-refurbished in 2025), ready for immediate operation. The machine is designed for high-capacity briquetting and is suitable for demanding industrial applications. The machine has approximately 2,000 operating hours. It has been newly refurbished at the Di Più factory: all vital components have been replaced, including all cables, electrical wiring, and required electrical equipment. The machine is brought to as-new condition and comes with a 6-month Di Più factory warranty. The machine can produce briquettes with or without a hole, with a diameter of 90mm to 110mm, using soft or hard wood, in either round or square shapes. Machine inspection is possible at the factory in Italy: Di Più Systems Srl, Via dell’Innovazione 11, 36042 Breganze (VI), Italy. The Di Più BRIK MB100 mechanical briquetting press is an automatic machine for compacting wood, sawdust, and other waste materials into wooden briquettes. The ideal humidity of the input material is between 8% and 12%, and the particle size between 1mm and 12mm. Technical data: - Production capacity: 1,300 – 2,300 kg/h (for sawdust density 160–200 kg/m³) - Briquette diameter: 90 – 110 mm - Main motor power: 75 kW - Total installed power: 98 kW - Piston compression pressure: 2,000 – 2,500 kg/cm² - Vertical screw with gearbox: 5.5 kW - Oil pump: 1.5 kW - Oil pump for extruder head closure: 1.5 kW - Feeder with screw and adjustable speed: 1.5 kW - Oil system for bronze bearing lubrication: 100 liters - Briquette output monitoring sensor (automatic shutdown when material supply runs out) - Safety covers for moving parts - Oil pressure sensor - Control cabinet - Input material storage hopper (buffer) - Level sensor for feed system monitoring - Machine weight: approx. 7,800 kg The machine is equipped with all necessary accessories for complete operation and integration into a briquetting line: ACCESSORIES – MB100: - Dosing silo: Made of heavy-duty steel. Diameter: 1,500 mm, height: 1,000 mm. Equipped with a rotary cutter with 2.2 kW gearbox, mounted on a robust steel frame. Material supply is monitored by a level sensor. Itedpfx Adjwrp Emsljl - Briquette cooling line after extrusion, total length 20 meters - Automatic briquette cutting saw - The saw automatically cuts briquettes to the operator's preset lengths - Device for producing briquettes with a hole - Machine head cooling system with ice water - The system produces 50 liters/min of ice water for effective briquetting head cooling. - Air-cooled water chiller with hermetic scroll compressors, microprocessor control, and a large energy storage tank with an immersed water-to-refrigerant heat exchanger. - The heat exchanger is a high-efficiency fin-pack type, made of copper pipes and aluminum fins. - Water tank with a capacity of 800 liters - Water feed pump (50 l/min – 20 m.w.c. – 0.55 kW) with three-circuit DN25 valves for regulating cooling water temperature at the briquetting head - Digital electronic temperature controller connected to an NTC sensor (measuring element d.6 × 52 mm, IP68, AISI 316) OPTIONAL: NOVAPAC packaging machine Possibility to purchase an additional NOVAPAC packaging machine, fully compatible with the Di Più BRIK MB100 and other machines. An ideal solution for automatic packaging immediately after briquetting. Year: 2013 Price for Novapac: €19,000 Equipment visible in the las

Condition: used, Year of construction: 2013, machine/vehicle number: 81300019158, Kolbenpumpe und -kompressor für CTP Anlagen / Piston Pump and Compressor CTP Processor Thomas - Rietschle 2750BGHISS75Baujahr / Year 2013 - Serial-No. 081300019158 für CTP Anlagen (Beispiel Agfa) / for CTP Processors (examplae Agfa) Online-Video-Inspection by Skype-Video Ijdpfxeh Eg Txj Adletl We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: like new (used), Year of construction: 2018, operating hours: 20 h, functionality: fully functional, 1 x Riggs Autopack Ltd depositor on mobile frame with pneumatic foot pedal. Has had very little use - LESS THAN 20 HOURS. Suitable for a variety of hot or cold products liquid or semi-liquid, including sauces, chutneys, jams, etc. Iodswpunbjpfx Adletl Manufacturer - Riggs Autopack Ltd. Model - 1000 Series 3. Filling range - 200ml to 2500ml piston & barrel set. Filling nozzle - 25mm diameter.

Condition: used, Technical specifications: Number of pistons: 4 Piston diameter: 80 mm Connection to central heating system Shelf dimensions: 2500 x 1300 mm Clearance: 400 mm Hydraulic clamping system Safety switch Engine power: 1.5 kW Iedezynkbspfx Adljtl Engine speed: 2800 rpm Power supply: 400 V Machine dimensions Length: 3260 mm Width: 1560 mm Height: 2000 mm

Condition: used, Year of construction: 1978, used good condition cleaned functionality tested Manufacturer: Bürkle Type: U 88 Year of manufacture: 1978 Machine no.: 3102629 Safety tested (GS certified) Touch control Safety cable on top Electric heating Specific maximum pressing force: 80 t Aluminum plates glued Lower piston Quantity: 6 Plate size approx. mm: 2550 x 1300 Opening width approx. mm: 400 Piston diameter: 70 Isdpozkl Ifefx Adljtl Space requirement approx. L x W x H approx. mm: 3100 x 1500 x 1900 Weight approx. kg: 4000 Storage location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty and guarantee

Condition: as good as new (ex-display), operating hours: 6 h, power: 4 kW (5.44 HP), volume flow: 0.57 m³/h, pressure (max.): 10 bar, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, RENNER Industrie reciprocating compressor with refrigerant dryer Intake capacity 700 l/min (delivery rate 570 l/min) Isdpfx Adjd Dhwneljtl Maximum pressure 10 bar Pressure tank 270 l Motor power: 400 V, 4.0 kW Dimensions: 970 x 795 x 1880 mm Vertical design for industrial applications, robust belt guard, galvanized compressed air tank according to AD2000 guidelines (with inspection opening) with intermediate and aftercooler, vibration-damping metal components for effective vibration reduction, with refrigerant dryer, optional with automatic condensate drain for refrigerant dryer and tank; various other designs available.

Condition: excellent (used), functionality: fully functional, KAESER KCT401-100 oil-free reciprocating compressor with a 100L tank. Technical specifications: Iodpfx Aozmvvledljtl power supply – 400 V; motor power – 2.40 kW; effective capacity – 275 l/min; maximum pressure – 10 bar; compressor in fully working condition; net price: 2200 PLN; gross price: 2706 PLN.

Condition: good (used), Year of construction: 2015, Atlas Copco Oil Free Screw Compressor with built-in Air Dryer Model SF2+FF 7.75 bar / 112 PSI Year 2015 400 volts three phase, 2.2 KW / 3 HP, 2885 RPM 8.9 CFM / 4.21 lts/s Very little use Iodpfxjy Iplfo Adljtl Ex Pharma Facility

Year of construction: 2001, condition: excellent (used), functionality: limited functionality, Used Paragon Cox H55 hydraulic lifting and driving vacuum double shaft mixer, disperser for sale The contact parts of the mixer are made of stainless steel With complete hydraulic system Without control cabinet. Manufacturer Cox Paragon Year of manufacture 2001. The contact parts of the mixer are made of stainless steel 1 pc 800mm dia 3 blade adjustable butterfly mixer max 400rpm SAI GM4-1000 D40J 100kw hydraulic piston motor 1 pc high speed dispersing mixing head ca: 1000rpm Sauer-Danfoss MMF046C 45kw axial piston hydraulic motor Hydraulic power unit main motor 55 kw 1440rpm 400/660volt Iodezzknlepfx Adletl 2 pcs 480 liter mixing vessel + 4 pcs stainless dosing rings + hydraulic press head. The mixer can be raised hydraulically by approx. 120 cm