Used Belt Press for sale (34,411)

Year of construction: 2026, condition: new, Specifications: - Performance: 1400 kg/h - Electric demands: 3 kW, 400 V, 6 A, triphase - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 2500x1330x1230 mm - Input height: 1250 mm Gsdpfx Ahjd Aqznj Hsbg - Output height: 370 mm - Weight: 1150 kg - IP65 certified electronics - Food industrial, massive polyester belt - Belt: 2mm thick, density: 6x16 filament/cm^2, ½ rate (suitable for large fiber-free juice) - High yield: 75% - depends on the freshness and quality of the fruits - High-pressure washer demand: 500 L/h - Compressed air demand: 50 L/h 6 bar - Built-in inverter: steplessly adjustable belt speed Fully automatic operation, with closed work area, reduces the oxidation to the minimum. In the bottom of the machine, there are two spinning washer heads guarantees optimal cleaning during the process. The distance between the press cylinder and the juice collector tray reduced against foaming. Very easy to clean. With 4pcs vibration-free feet. It requires minimal maintenance. High-pressure washer and air compressor are essential for operating.

Year of construction: 2024, condition: new, Belt press PT-1050 is a device used for pressing apple must. The process takes place between the belt of the device and the appropriately spaced rollers of the press. The squeezed juice is pumped into the pasteurizer tank. The whole device is made of stainless steel AISI304 Cmbgemje TECHNICAL DATA: Godpfxjukq Tas Ah Hsbg - capacity : up to 1500kg apples/hour - yield of juice from squeezed apples up to 75% - installed power :1,4 kW 230V - water consumption ; up to 4 l/min - weight ;1000kg - belt width 700mm - belt speed adjustable - juice tank with sieve mesh fi= 2mm - juice pump

Year of construction: 1990, operating hours: 30,000 h, condition: ready for operation (used), functionality: fully functional, Used belt press for continuous sludge dewatering for sale Year of construction 1990 Operating hours approx. 30,000 h Description Belt filter press for continuous sludge dewatering Structure of the belt filter press Switch and control system (ROMPF) Fully automatic flocculant treatment plant (ROMPF) NEMO sludge pump (NETZSCH) Technical condition: The plant is completely ready for operation. The entire system was serviced and repaired once a year (documentation/documents available) Mint screen belt as spare part is included. Technical data Manufacturer / type: ROMPF / KR 1700 M Active filter belt length: 8.50 m Active filter belt area: 14.50 m² Drive power: 3.2 kW Gjdpfx Ahjr T Hico Hjbg Working parameters Throughput capacity: 6 - 15 m³/h Discharge dry matter content: up to approx. 25 % dry matter Capacity/h: 0.4 - 0.5 t TS /h Dimensions (trailer with body) Body length: 8.000 m Loading width: 2.420 m Interior height: 2.500 m Mass: 12.00 t (total weight of trailer with body)

Year of construction: 2025, condition: new, Nominal capacity 3000kg/h (depending on fruits & operating condition, up to 6000kg/h) Yield up to 75% Belt width/length: 1000mm/approx. 7000mm Working width/high: 900mm/0-50mm continuously Belt speed continuously variable 1,0-5,2m/min Electrical supply: Drive motor 2,2 kW 400V Washing motor: 0,25 kW 400V Waterconsumption for belt cleaning: Approx. 3 l/operating minute Weight approx. 2300kg Gsdpfx Ajygmwoh Hsbg Dimensions: (lxwxh) 2750x1890x1690mm without high-pressure cleaner and without compressor

Condition: used, Year of construction: 2023, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 178, type of input current: AC, total width: 2,000 mm, total length: 4,000 mm, total height: 2,000 mm, overall weight: 1,100 kg, power of the servo motor: 13 W, hopper volume: 500 l, input voltage: 400 V, For technical details please contact manufactorer SRAML Slovenia Gjdpfx Ahox E N Uns Hjbg Products: The Belt Press has been used for the pressing of apples, other fruits, and elderflowers

Condition: used, It was used for extracting juice from apples. Belt width: 200 cm, capacity approximately 16 tons/hour, juice yield 60–78% depending on the quality of the raw material. Gjdsxn Ulujpfx Ah Hjbg

Year of construction: 2025, condition: new, Our belt presses are equipped with two large pressing rollers that extend the pressing process, ensuring particularly gentle juice extraction. The result is a clear, foam-free juice of high quality. The pneumatic belt tension and automatic belt control guarantee consistently high quality throughout the entire pressing process. The belt press features an automatic brush cleaning system, eliminating the need for a high-pressure cleaner. The belt is cleaned by six specially designed water nozzles. For cleaning, only a compressor with 8 bar pressure and a ½” water connection are required. Thanks to these special nozzles, water consumption is reduced, leading to lower operating costs. The open design allows for quick and uncomplicated cleaning, which can be completed in just a few minutes. Technical Information: • Nominal capacity: 950 kg/h • Power requirement: 1 kW, 400 V, 16 A • Material: WNr. 1.4301, AISI 304 stainless steel • Compressed air requirement: 50 l/h at 6 bar • IP65 electronic control cabinet • Juice yield: Up to 75% • Fully automatic and stepless control of belt speed Gsdjv Sq S Nepfx Ah Hobg • User-friendly • Easy to clean • Rollable machine feet Dimensions: Length: 2230 mm Width: 1450 mm Height: 1250 mm Loading height: 1240 mm Pomace discharge height: 500 mm Juice outlet height: 370 mm Weight: 540 kg Optional: Juice collection tray ISW 100 Automatic juice discharge

Year of construction: 2020, condition: new, Single Belt Press PT-400 The pulped mash is conveyed via the washing-pulping mill into the press in-feed hopper. The pulp is distributed across the main pressing roller and between the belt to start the initial juice extraction. This pulp will be progressively squeezed to the maximum over a series of additional rollers and mash deflector blades in order to achieve an optimum juice yield of up to 75%. At the exit of the press, the pomace is automatically scraped from the belt. CAPACITY 500 kg apples/h VOLTAGE 1x230 V POWER 0,8 kW WATER CONSUMPTION up to 4 l/min Godpfx Ajfgl Hfsh Hjbg BELT WIDTH 400MM

Year of construction: 2024, condition: new, The obtained juice flows into integrated collection tank under the press. Then the pump transfers the juice from the press to a desired tank for further processing. The pressing process is continuous Capacity: 400 kg/h The most evolutionary feature of our Belt press POWERPRESS line is that belt presses come with integrated pump and juice collection tank. This means you save money and do not need additional juice collection tank and pump which otherwise would use much space and cause additional costs. The juice yield of apples using our belt press is ~75 %. There is a filtration sieve integrated into the juice collection tank. Because of that the belt press 400 filtrates the juice even during the pressing stage providing cleaner and more pure product. The belt presses work automatically: when the mash inlet tank is full, all other machines, which come before belt press, turn off automatically. When the juice tank is full, the pump automatically pumps the juice into the tanks. The belt press includes a high-pressure washer, which continuously washes the belt of the machine. Our belt washing system is simple, does not contain any engines or reducers, so it prolongs the use time and saves the service costs. After work, belt press should be manually washed with a water stream. A full washing process takes around 15-20 minutes. Washing is simple and all the parts of the belt press are easily removable without any tools. Belt tension is adjustable. Machine is made entirely of stainless steel and has adjustable feet. Gbedpfoflpnyjx Ah Hsg Easy to clean with no closed or inaccessible spaces, all parts are easy to assemble. Interested in belt press only with different efficiency? Check out our other belt presses: POWERPRESS 800, POWERPRESS 1200, POWERPRESS 1500.

Year of construction: 2025, condition: new, functionality: fully functional, With stainless steel square tube frame 15 pressing rollers 2 press nipps Electrical powerd with stepless speed regulation Gbsdpfoclt Sbox Ah Hsg Belt width 1500mm High pressure belt cleaning integrated Nominal capacity up to 15.000 kg/h (depending on fruits & operating condition)

Condition: new, capacity: up to 7 000 kg/h electric outlet: 3kW 400V 50Hz (3 phases) fuse: 16 A Gbodpfxsdix N Hj Ah Hsg dimensions: length: 4 435 mm width: 2 250 mm height: 2 160 mm insertion resp. discharge height: 1 430 mm belt width: 1 100 mm spread width: 320 - 870 mm spread height (infinitely adjustable setting): 10 - 50 mm weight: 3 400 kg material: 1.4301 / AISI 304 juice yield : up to 80 % belt Speed: 1,2 – 4,5 m/min contact time: 1,5 - 6 min water consumption for cleaning: 20 l/min connections: sewage connection: Ø 75 mm juice discharge connection: DN 40 juice discharge height: 200 mm sewage discharge height: 100 mm pomace discharge height: 800 mm suitable for pomaceous and stone fruit scope of delivery: high-pressure cleaner, compressor

Year of construction: 2025, condition: new, Our belt presses can be dismantled and cleaned in just a few minutes without tools. The belt press is easy to operate. Effective belt cleaning is achieved by three spray nozzles and silicone wipers. Thanks to this innovative solution, the system can be operated for the economical production of fruit and vegetable juice. You don’t need a high-pressure cleaner, so you save on electricity costs when pressing. All you need is a compressor with 8-bar pressure and a ½" water connection. • Fully automatic and infinitely variable belt speed control • Easy to clean • Easier maintenance • Rolling machine feet • Automatic belt correction Technical Information Rated output: 350 kg/h Working width: 400 mm Juice yield: up to 75% Power consumption: 0.55 kW, 400 V, 16 A Material: Wnr. 1.4301, AISI 304 stainless steel Air Operating pressure: 6 bar approx. 50 l/h Gbjdpev Sq Nbsfx Ah Hog Dimensions: Length: 1,080 mm Width: 1,070 mm Height: 1,320 mm Weight: 297 kg Optional: automatic juice draining

Year of construction: 2024, condition: new, Single Belt Press PT-1000 The pulped mash is conveyed via the washing-pulping mill into the press in-feed hopper. The pulp is distributed across the main pressing roller and between the belt to start the initial juice extraction. This pulp will be progressively squeezed to the maximum over a series of additional rollers and mash deflector blades in order to achieve an optimum juice yield of up to 75%. At the exit of the press, the pomace is automatically scraped from the belt. CAPACITY 800 kg apples/h VOLTAGE 1x230 V POWER 0,8 kW WATER CONSUMPTION up to 4 l/min BELT WIDTH 500MM Gedofglxxjpfx Ah Hjbg

Year of construction: 2024, condition: new, The obtained juice flows into integrated collection tank under the press. Then the pump transfers the juice from the press to a desired tank for further processing. The pressing process is continuous. Capacity: 1200 kg/h The most evolutionary feature of our Belt press POWERPRESS line is that belt presses come with integrated pump and juice collection tank. This means you save money and do not need additional juice collection tank and pump which otherwise would use much space and cause additional costs. The juice yield of apples using our machine is ~75 %. There is a filtration sieve integrated into the juice collection tank. It filtrates the juice providing clearer and purer product. Machine works automatically: when the mash inlet tank is full, all other machines, which come before belt press, turn off automatically. When the juice tank is full, the pump automatically pumps the juice into the tanks. The belt press includes a high-pressure washer, which continuously washes the belt of the machine. Our belt washing system is simple, does not contain any engines or reducers, so it prolongs the use time and saves the service costs. Pneumatic lifting of the security cover of the press ensures easier access when cleaning. After work, belt press should be manually washed with a water stream. A full washing process takes around 15-20 minutes. Washing is simple and all the parts of the belt press are easily removable without any tools. Belt tension is adjustable. Machine is made entirely of stainless steel and has adjustable feet. Gsdpfx Ajflpplsh Hebg The washing is simple, and all machinery parts are easily removable. Interested in belt press only with different efficiency? Check out our other belt presses: POWERPRESS 400, POWERPRESS 800, POWERPRESS 1500.

Condition: new, capacity up to 700 kg/h power: drive motor 0,55 (0,75) kW (PS) washing machine motor 0,12 (0,16) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 1 940 mm width 1 080 mm height 1 300 mm insertion resp. discharge height 1 300 mm belt width 500 mm belt length 6 530 mm spread width 300 mm spread height (9 stages) 0 - 50 mm weight 520 kg material 1.4301 / AISI 304 juice yield up to 75 % belt speed: stage 1 1,2 m/min stage 2 2,4 m/min contact time: stage 1 3 min stage 2 1,5 min water consumption for cleaning 3 l/min connections: sewage connection Ø 76,1 mm juice discharge connection 1 ½ “ juice discharge height 300 mm Gbedpjb Ndqqefx Ah Hog sewage discharge height 170 mm pomace discharge height 480 mm suitable for pomaceous and stone fruit scope of delivery high-pressure cleaner, compressor

Year of construction: 2025, condition: new, Our systems can be dismantled down to the base frame in just a few minutes for effective cleaning. Our belt presses are suitable for pressing fruit and vegetables. Effective belt cleaning is done with the help of brushes and a belt washing system. You only need an air compressor to operate the system. Technical Information Gbedpev Sq Rxefx Ah Hjg • Rated output: 650 kg/h • Power consumption: 1 kW, 400 V, 16 A • Material: Wnr. 1.4301, AISI 304 stainless steel • Compressed air requirement: 50 l/h 6 bar • IP65 electronic control cabinet • Juice yield: Up to 75% • Fully automatic and infinitely variable belt speed control • Operator friendly • Easy to clean • Rolling machine feet Dimensions: Length: 2,230 mm Width: 1,250 mm Height: 1,250 mm Height assumptions: 1,240 mm Height of pomace discharge: 500 mm Height of juice outlet: 370 mm Weight: 480 kg Optional: Juice collection tank ISW 100 Automatic juice draining

Year of construction: 2024, condition: new, Belt press PT-1050 is a device used for pressing apple must. The process takes place between the belt of the device and the appropriately spaced rollers of the press. The squeezed juice is pumped into the pasteurizer tank. The whole device is made of stainless steel AISI304 Cmbgemje TECHNICAL DATA: - capacity : up to 5900kg apples/hour - yield of juice from squeezed apples up to 75% - installed power :3,4 kW 230V - water consumption ; up to 6 l/min - weight ;2000kg - belt width 1200 mm - belt speed adjustable Gbsdpsukq T Hofx Ah Heg - juice tank with sieve mesh fi= 2mm - juice pump

Year of construction: 2023, condition: new, Belt presses POWERPRESS 800 are designed for pressing fruit, berry and vegetable mass. Fruit mass is placed on the belt which presses it against cylinders.The obtained juice flows in the collection trays under the belt presses. Pressing is continuous. Gbedshu Ab Depfx Ah Hog Capacity: 800 kg/h The most evolutionary feature of our belt press POWERPRESS line is integrated pump and juice collection tank into the press itself. That means that you save money and do not need an additional juice collection tank and pump which otherwise would use much space and money. There is a filtration sieve integrated into the juice collection tank. Because of that the machine filtrates the juice even during the pressing stage providing cleaner and more pure product. Entirely made of stainless steel. Has adjustable feet. The belt presses function automatically. When the tank of the mass is full, all other machines which come before belt press turn off automatically. When the juice tank is full, juice pump pumps the juice into the tanks. Includes High pressure washer. Has an integrated pump. Belt tension is adjustable. Easy to clean with no closed or inaccessible spaces, all parts are easy to assemble. The cleaning of the belt is automatic with high pressure cleaner, scraper and brush. Pneumatic lifting of the security cover of the press ensures easier access when cleaning.

Condition: new, capacity: up to 1 000 kg/h power: drive Motor: 0,75 kW brush cleaning: 0,37 kW high-pressure cleaner: 4,7 kW electric outlet: 400V 50Hz (3 phases) fuse: 16 A dimensions: length: 2 145 mm width: 1 270 mm height: 1 290 mm insertion resp. discharge height: 1 290 mm belt width: 580 mm spread width: 240 -460 mm spread height (9 stages): 10 - 50 mm weight: 665 kg material: 1.4301 / AISI 304 juice yield up to 75 % Godpsdix Icofx Ah Hebg belt speed (continuous): 2,1 - 5,5 m/min lead time: 0,6 - 1,6 min water consumption for cleaning: 3 l/min connections: sewage Connection: DN75 juice discharge Connection: 1 ½ “ juice discharge height: 305 mm sewage discharge height : 86 mm pomace discharge height: 745 mm suitable for pomaceous and stone fruit scope of delivery: high-pressure cleaner, compressor

Year of construction: 2024, condition: new, The obtained juice flows into integrated collection tank under the press. Then the pump transfers the juice from the press to a desired tank for further processing. The pressing process is continuous. Capacity: 1500 kg/h. Gjdpfeflpp Eox Ah Hebg - The most evolutionary feature of our Belt press POWERPRESS line is that belt presses come with integrated pump and juice collection tank. This means you save money and do not need additional juice collection tank and pump which otherwise would use much space and cause additional costs. - The juice yield of apples using our belt press 1500 is ~75 %. - There is a filtration sieve integrated into the juice collection tank. It filtrates the juice providing clearer and purer product. - The belt presses work automatically: when the mash inlet tank is full, all other machines, which come before belt press, turn off automatically. When the juice tank is full, the pump automatically pumps the juice into the tanks. - The belt press 1500 includes a high-pressure washer, which continuously washes the belt of the machine. Our belt washing system is simple, does not contain any engines or reducers, so it prolongs the use time and saves the service costs. - Pneumatic lifting of the security cover of the press ensures easier access when cleaning. - After work, belt press should be manually washed with a water stream. - A full washing process takes around 15-20 minutes. Washing is simple and all the parts of the belt press are easily removable without any tools. - Belt tension is adjustable. - Machine is made entirely of stainless steel and has adjustable feet. - Easy to clean with no closed or inaccessible spaces, all parts are easy to assemble.

Condition: new, Specifications: capacity up to 600 kg/h power: drive motor 0,75 (1,02) kW (PS) brush cleaning 0,37 (0,5) kW (PS) high pressure cleaner 4,7 (6,4) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: Gbodpfx Ahod Nrako Hsg length 1 825 mm width 1 085 mm height 1 290 mm insertion resp. discharge height 1 290 mm belt width 420 mm spread width 300 mm spread height 10 - 50 mm weight (belt press) 550 kg material 1.4301 / AISI 304 juice yield up to 75 % belt speed (continuously) 2,1 - 5,5 m/min lead time 0,4 - 1 min water connection min. G ½ “, min. 12 l/min juice discharge height 305 mm pomace discharge height 780 mm suitable for pomaceous and stone fruit scope of delivery high-pressure cleaner, compressor

Year of construction: 2024, condition: new, The obtained juice flows into integrated collection tank under the press. Then the pump transfers the juice from the press to a desired tank for further processing. The pressing process is continuous. Capacity: 3000 kg/h. The most evolutionary feature of our Belt press POWERPRESS line is that belt presses come with integrated pump and juice collection tank. This means you save money and do not need additional juice collection tank and pump which otherwise would use much space and cause additional costs. -The juice yield of apples using our belt press 3000 is ~75 %. -There is a filtration sieve integrated into the juice collection tank. It filtrates the juice providing clearer and purer product. -The belt presses work automatically: when the mash inlet tank is full, all other machines, which come before belt press, turn off automatically. When the juice tank is full, the pump automatically pumps the juice into the tanks. -The belt press 3000 includes a high-pressure washer, which continuously washes the belt of the machine. Our belt washing system is simple, does not contain any engines or reducers, so it prolongs the use time and saves the service costs. -Pneumatic lifting of the security cover of the press ensures easier access when cleaning. -After work, belt press should be manually washed with a water stream. A full washing process takes around 15-20 minutes. Washing is simple and all the parts of the belt press are easily removable without any tools. -Belt tension is adjustable. -Machine is made entirely of stainless steel and has adjustable feet for more convenient use. -Easy to clean with no closed or inaccessible spaces, all parts are easy to assemble. Gbodpsq Nl Aqsfx Ah Hsg

Condition: new, capacity up to 1 500 kg/h power: drive motor 0,55 (0,75) kW (PS) washing machine motor 0,12 (0,16) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 2 200 mm width 1 465 mm height 1 460 mm insertion resp. discharge height 1 460 mm belt width 650 mm belt length 7 200 mm spread width 450 mm spread height (infinitely adjustable setting) 0 - 50 mm weight 1060 kg material 1.4301 / AISI 304 juice yield bis zu 75 % belt speed 0,9 - 1,8 m/min contact time 1,9 - 3,8 min water consumption for cleaning 3 l/min connections: sewage connection Ø 75 mm juice discharge connection 2 “ juice discharge height 435 mm sewage discharge height 250 mm pomace discharge height 810 mm Godpfx Ajb Ntp Aoh Hobg suitable for pomaceous and stone fruit scope of delivery high-pressure cleaner, compressor

Year of construction: 2024, condition: new, functionality: fully functional, Belt press POWERPRESS 300 is designed for pressing fruit, berry and vegetable mash. Fruit mash is supplied on the belt which presses it against shafts. The obtained juice flows into a small collection tank under the press with filtration sieve on top. Then the external pump or juice collection tank with pump transfers the juice from the press to a desired storage tank or straight to ROCKET pasteurizer for further processing. The pressing process is continuous. Capacity: 300 kg/h Gsdpfx Aot Rft Ush Hjbg The most cost-efficient belt press in the market! The most evolutionary feature of our Belt press POWERPRESS 300 is one huge pressing shaft, which lets the machine to maintain the longer pressing time (belt length is 4900 mm) and huge shaft dimensions squeezes the juice efficiently by saving the costs and space. The juice yield of apples using our belt press is ~65-75 %. The yield highly depends on freshness and variety of fruits. There is a filtration sieve integrated into the juice collection tank. Because of that the belt press 300 filtrates the juice even during the pressing stage providing cleaner and purer product. The belt press includes a high-pressure washer, which continuously washes the belt of the machine. Our belt washing system is simple, does not contain any engines or reducers, so it prolongs the use time and saves service costs. Adjustable fruit inlet lever lets fruit mash supply onto the shaft easily. Crushed fruit mash can be supplied from MAXIMILL or straight from a bucket or basket. After work, belt press should be manually washed with a water stream. A full washing process takes around 15 minutes. Washing is simple and all the parts of the belt press are easily removable without any tools. Belt tension is adjustable. The machine is made entirely of stainless steel and has adjustable feet. Easy to clean with no closed or inaccessible spaces, all parts are easy to assemble.

Condition: new, capacity: up to 3 000 kg/h electric outlet: 3,5kW 400V 50Hz (3 phases) fuse 16 A dimensions: length: 3 720 mm width: 1 730 mm height: 2 110 mm insertion resp. discharge height: 1 430 mm belt width: 660 mm spread width: 220 - 440 mm spread height (infinitely adjustable setting): 10 - 40 mm weight: 2 200 kg material: 1.4301 / AISI 304 juice yield : up to 80 % belt Speed: 1,2 – 4,5 m/min contact time: 1,4 – 4,2 min water consumption for cleaning: 10 l/min connections: sewage connection: Ø 75 mm juice discharge connection: DN 25 juice discharge height: 130 mm sewage discharge height: 50 mm pomace discharge height: 810 mm suitable for pomaceous and stone fruit Gbjdpfxodix I Us Ah Hjg scope of delivery: high-pressure cleaner, compressor