Used Plate Bender for sale (12,931)

Condition: good (used), Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate -Mounting plate: Straightening plate with support ribs and adjustable feet -Length: 3000 mm -Width: 1250 mm -Sheet thickness: 48 mm Gbsdpfx Aey S Rnijp Dsu -Adjustable feet: Ø 300 x 670 mm -Transport dimensions: 3000/1255/H900 mm -Weight: 3500 kg

Condition: good (used), Year of construction: 2006, sheet width 2050 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 2100 mm down holder 12 Stück no. of strokes max. 26 Hub/min cutting angle 1.6 ° back stop - adjustable 750 mm Control ELGO oil volume 120 ltr. total power requirement 11.0 kW weight 3900 kg range L-W-H 2860 x 2100 x 1560 mm with only approx. 400 operating hours (!!) Original price approx. 30.000 euros Special price upon request Features: - Robust electro-hydraulic oscillating shear - ELGO digital display, Model P9521, * for electric backgauge - NC-controlled electric motor-driven material/backgauge * Travel range continuously adjustable backgauge X = 750 mm * Backgauge with backlash-free ball screw * Travel speed: 100 mm/sec Gbsdpfsznngxox Ap Deu - 1x sturdy side stop * with T-slot and millimeter scale - 1x sturdy support arm - Electric cut length limiter * Cut length limiter to increase the number of strokes per minute - Manual kerf adjustment * Operated centrally from the right-hand side stand - Front support plates with ball bearings - Front finger/interference guard - Jog mode with push buttons on the left control panel - Protective guard = safety device behind the machine - Operating instructions (PDF)

Condition: new, Year of construction: 2026, neu 2026 090203 prompt, Zwischenverkauf v Türkei 3810 € 1 1020 mm 1.5 mm 500 mm 1950 mm Gbjdpeyz Dc Esfx Ap Dou 1000 mm 1150 mm 420 kg welded steel construction with manual hold down unit back gauge adjustable by handwheel users manual in ENGLISH

Condition: new, I - beam section - flat steel 100 x 15 (d 450) mm I-beam section - upend 60 x 10 (d 500) mm L-beam 50 x 6 (d 1000) mm round material 35.0 (d 600) mm bar material dia. max. 70 x 2 (d 1000) mm square material 50 x 50 x 3 mm bending speed 4.5 m/min roll diam. toproll 155 mm bore 50.0 mm total power requirement 1.5 kW Gedpfxezx Hd Re Ap Dobu weight 400 kg range L-W-H 990 x 750 x 1350 mm Equipment: - robust electro-motorized ring/profile bending machine - machine base frame, with rear shelf - horizontal and vertical work possible - 1x freely movable foot switch - segmented standard rollers (divided) - 2x motor-driven rollers - manual delivery of the top roller - analog position display of the top rollers (scale) - manually adjustable side/straightening rollers - CE mark / declaration of conformity - operating instructions in German

Condition: good (used), Cast iron marble plate Length: 3500 mm Width: 2500 mm Gbjdpsz H Iymofx Ap Dou Thickness: 300 mm Height on feet: 900 mm Delivered with 12 leveling feet Weight : 6,3 T

Condition: used, Steel floor plates Length: 2210 mm Width: 1500 mm Thickness: 260 mm With T-slots in both directions Weight: approx 2 T Gbsdpsz H Iyyjfx Ap Dju 3 same plates available.

Condition: used, Pair of cast iron angle plates Gjdpfx Apoz H I Abj Dobu Height: 3000 mm Width: 1000 mm Depth: 1245 mm Weight: 3 T / unit

Condition: used, Pair of cast iron angle plates Drilling diameter: Ø 27 mm Width: 575 mm Depth: 2000 mm Total height: 4000 mm Gjdoz H I Anepfx Ap Debu Unit weight: approx 6 T

Condition: ready for operation (used), Mahr Marsurf XR 1, Marsurf SD 26 roughness measuring instrument, measuring instrument, granite measuring plate Mahr Marsurf XR1 with Marsurf SD 26 feed unit: Measurement of roughness, waviness, and profiles Measuring range: ±250 µm Measuring range with longer stylus arm: up to ±750 µm Vertical resolution: up to 0.7 nm Measuring length: 26 mm Feed speed: 0.1–1.0 mm/s Positioning speed: 5 mm/s Motorized height adjustment: 7.5 mm Measuring force: approx. 0.7 mN Cut-off: 0.08 / 0.25 / 0.8 / 2.5 / 8 mm Individual measuring lengths: 1–50 Evaluation: Roughness, waviness, and profile Measured parameters: including Ra, Rq, Rz, Rt, Rp, Rv, RSm, Rsk, Rku, Rk, Rpk, Rvk Software: MarWin Measuring stand: MarSurf ST-D Measuring plate Dimensions: 600mm x 500mm Brand: Bilz Type: F60-50 Max. load capacity: 130 kg You are welcome to visit us for an inspection. We will gladly arrange a cost-effective shipping service for you! You will receive a proper invoice. Godpfx Ajz H Uklsp Debu For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and browse our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: ready for operation (used), sheet width 2025 mm plate thickness 3.0 mm distance between columns 2050 mm no. of strokes 38 Hub/min cutting angle 1.38 ° Control konv. total power requirement 4.0 kW weight of the machine ca. 1100 kg dimensions of the machine ca. 2299 x 2000 x 1130 mm Current new price: approx. 20.000 euros From a maintenance workshop Special price available upon request Features: - Robust / high-performance electromechanical sheet metal shear - Manual material backgauge * Infinitely variable adjustment range * Adjustment from the rear - via handwheel Gedezzrflepfx Ap Dsbu * Includes mm scale - 1x side stop - 3x front support arms - 1x freely movable foot switch - rear sheet metal chute - front sheet metal removal for smaller workpieces - digital piece counter - control cabinet - mounted on the front left

Condition: excellent (used), functionality: fully functional, Year of construction: 1990, - *Brand: FAMAR S.N.C. Officine Meccaniche - ALBIATE (MI) Italy* - *MODEL: A311 - 15/4* - *SERIES No. 571 - YEAR 1990* - Compliance: MAY 1990 - Art. R.233-69 of the Labor Code (French plate) - Type: Asymmetrical 3-roll bending machine *Features:* - Usable length: *1500 mm* (15 = 15 decimeters) - Thickness: *4 mm max in steel* (15/4 = 1500 x 4) - Rolls Ø ~ 110-120mm, hardened steel - Motorized: rear green motor as seen, 2.2kW - Control: remote control panel *FORWARD / REVERSE + UP / DOWN* (lower roll adjustable) - Weight: *~ 1,250 kg* Gbjdpfez E R Ausx Ap Dsu

Condition: good (used), total height: 890 mm, Tension tower, manufactured by Lang 192 x 192 mm square Gjdpez E Sahefx Ap Dobu Height 890 mm or 860 mm, excluding adapter plates Base plate 384 x 384 mm Weight approximately 200 kg Several of these tension towers are available.

Condition: excellent (used), Akbend ASM140 Bending Rolls Gedpjz Hdv Dsfx Ap Djbu 3 Rolls 140mm top roll 1250mm length x 5mm thickness Year 2007 Motor power 2.2kw

Condition: used, Novalith measuring plate, granite plate, hard rock plate, control plate, 120x80cmx16cm with base cabinet, total height 1m used, as shown in the pictures from stock (may have storage marks) For further technical information, please refer to the pictures. Scope of delivery as shown in the pictures. with invoice Godpfxoz Hwyvo Ap Dobu The invoice will be enclosed with the shipment.

Condition: used, plate width 1020 mm plate thickness 4 mm diameter of upper rolls 110 mm Gbedsz N Hwqepfx Ap Dou total power requirement 2,2 kW weight of the machine ca. 900 Kg dimensions of the machine ca. 2,1 x 0,7 x 1,2 m Fasti three-roll plate bending machine / plate rolling machine In excellent condition. The machine was completely overhauled in 2016.

Condition: used, For export only! Gbsdpfez N Slgex Ap Dju G&J C85 Cleaning Unit

Condition: used, For export only! Heights Titanium 85 plate processing machine. Gsdpfx Apez Nf Unj Debu

Condition: new, sheet width 2050 mm plate thickness 3 mm distance between columns 2100 mm back stop - adjustable 600 mm connected load kW weight of the machine ca. 1,1 t dimensions 2,7 x 2,1 x 1,4 m The machine works quietly and it is energy-saving by its gear motor and brake system. Gbjdpfx Ajfv H Dkep Dju Our machine is manufactured as steel construction monoblock body welded from ST42 quality material. The blades on the machine are of 2379 quality and the brand’s name is BOHLER. These high-quality blades ensure quality and precise cutting. Emergency stop button and finger guard grill are standard equipment of foot pedal machine.

Year of construction: 2022, condition: used, sheet width 1550 mm plate thickness 3 mm distance between columns 1600 mm back stop - adjustable 600 mm connected load 3 kW weight of the machine ca. 1,1 t dimensions 2,06 x 2,14 x 1,21 m Demonstration machine with small paint damage. The machine works quietly and is powered by its geared motor Braking system energy-saving. Our machine is welded as a monobloc body from ST42 quality material. The knives of the machine are of 2379 quality and the brand name is BOHLER. These high-quality knives guarantee precise cutting. Emergency stop button, foot switch and finger guard are included standard equipment. (Documentation in English only) Gbsdpfx Aofv H Dnsp Dsu

Year of construction: 1995, condition: excellent (used), machine/vehicle number: 458/08 (C.2.144.1301/02), Max. Format: B1 Voltage : 100-240V // 300-330VA // 50/60Hz Gjdpjfh Dp Tsfx Ap Dobu Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST

Year of construction: 1998, condition: excellent (used), Grinding wheel 500 mm diameter 355 rpm Gbedpfxed Tyade Ap Deu Estimated age

Year of construction: 2010, condition: excellent (used), Splash guard 24830 Diameter 500 mm Height 115 mm Taper 120 mm Gbsdpfed Tyu Eex Ap Dju Estimated age

Year of construction: 2006, condition: excellent (used), Splash guard Gsdpfx Apjfat Uxs Dsbu Diameter 360 mm Inner diameter 115 mm Age estimated.

Condition: used, Oscillating shear machine KÖLLSCHEN, type BSK 2000/2 Cutting length: 2000 mm Cutting thickness: 2 mm Stand overhang: 90 mm Working height: 920 mm Power supply: 380 volts, 50 Hz Motor power: 4 kW - Drive via geared motor with brake and crankshaft - Mechanical sheet metal holder - Manual back gauge, 500 mm - Gauge adjustment via 2 handwheels, at the rear on the back gauge guide with a measuring scale - Front side gauge, left, 720 mm Gedpfxoifu Ans Ap Debu - Electric foot switch - Manual central lubrication - Control cabinet on the machine - Machine rests on 4 oscillating elements, approximately 100 mm in height Space requirement (L x W x H): 2800 x 1700 x 1450 mm Weight: 2300 kg Good condition

Condition: good (used), Aluminum plate, Alu, 252 x 128 x 6 cm, workbench tabletop. Gbodpfxsiu Uzuj Ap Dou Heavy-duty aluminum plate -37-. Alu 252 x 128 x 4.5 cm Workbench tabletop. You can find more items – new and used – in our shop! International shipping costs available upon request!