Used Plate Heat Exchanger Evaporator for sale (24,279)

Condition: excellent (used), Water evaporator heat exchanger Fsdpfoxxccpsx Adaefw

Condition: excellent (used), Year of construction: 2016, operating hours: 27 h, SBL 1060 SE Year: 2016 Sheet feeder: Manual non-stop pile feeder Material range: Paper and board from 470 × 350 mm to 1060 × 760 mm Max cutting format: 1050 × 740 mm Min sheet size: 470 × 350 mm Max sheet size: 1060 × 760 mm Max cutting pressure: 300 tons Material thickness: 0.1 – 2 mm (corrugated/laminated max 4 mm) Min gripper margin: 9.5 mm Max inside chase size: 1155 × 852 mm Cutting plate size: 1076 × 756 mm Max speed: 8,000 sheets/hour Ffsdpfx Aewypp Isdaow Power consumption: Total 32 kW (22 kW + 10 kW for lower plate heating) Machine dimensions (L×W×H): 5,900 × 5,700 × 2,615 mm Max pile height – feeder (with pallet): 1,750 mm Max pile height – delivery (with pallet): 1,450 mm Feeder Section - Pneumatic feeder table - Non-stop manual feeder system - Anti-static system - Pre-pile device - Manual suction group adjustment - Micrometric suction adjustment - Motorized side pile adjustment - Suction belt feeder table - High-pressure lubrication pump - 2 pneumatic side register guides - Electronic control of front and side register Cutting/Embossing Section - Automatic pressure adjustment up to 300 tons - Preparation and introduction table for die frames in platen - 2 quick-lock die chase frames with bottom plate - Pneumatic locking of the chase and lower supporting plate - Centerline System - Micrometric system - Heated lower support plate (24 mm) - Cutting plate: 4 mm - Compensation plate: 3 mm - Archiveable 1 mm thin cutting plate Stripping Section - Quick lock for upper and central stripper frames - 2 standard upper stripper frames - 2 standard lower stripper frames - Double accessory kit for lower stripper prep (pins, bars, clamps, etc.) Delivery Section - High-pile automatic non-stop delivery with conveyor - Guillotine for automatic removal of gripper margin waste - Sheet deceleration device - Tab insertion device

Condition: used, Used Heat and Control NC-3006 Oil Roaster continuous nut fryer with capacity 600 kg/hour, made in 2011, installed 2013 and last used in 2014. Major equipment includes fryer (max temperature 200 degrees Celsius with positioning conveyor, main conveyor, sediment conveyor), oil storage tank, plate heat exchanger, oil filter, mixing tank, control system. Fedpjyhc Rajfx Adajfw 'The Oil Roaster continuous nut fryer is specially designed for low oil volume, precise temperature control and clean operation for every type of nut process: Peanuts, Almonds, Sunflower meats, cashews, honey-roasted, and more.'

Condition: new, Year of construction: 2021, functionality: fully functional, cooling capacity: 1,736 kW (2,360.30 HP), type of input current: three-phase, type of cooling: water, overall weight: 9,850 kg, input voltage: 400 V, total width: 2,130 mm, total length: 4,830 mm, total height: 1,600 mm, warranty duration: 6 months, heating capacity: 1,964 kW (2,670.29 HP), Watercooled chiller/Heat pump CIAT LWHE 4628E0003- 1736 kW/ 1964 kW Cooling capacity: 1736 kW / 493.62 tons (12/7 — 30/35°C) Heating capacity: 1964 kW / 558.45 tons (40/45 —10/7°C) Year of manufacture: 2021 Options: Economizer. High efficiency. Heat pump. Refrigerant circuit: 2 pcs. Fedpfxewy Nnkj Adaofw Heat exchanger: Shell and tube Compressors: 2 pcs. Carlyle 06TVW819SW3D.A42 (screw compressor with stepless control between 15% and 100%) Type of refrigerant: R134a Dimensions: 4.83x2.13x1.6 m. Weight: 9850 kg. Working hours: 0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), Year of construction: 2020, functionality: fully functional, cooling capacity: 20 kW (27.19 HP), type of input current: three-phase, type of cooling: air, overall weight: 281 kg, input voltage: 400 V, total width: 600 mm, total length: 1,600 mm, total height: 1,800 mm, warranty duration: 6 months, heating capacity: 20 kW (27.19 HP), Aircooled chiller/Heat pump SYSTEMAIR SYSCROLL 20 AIR EVO HP 20 kW/20 kW Cooling capacity: 20 kW / 5.69 tons (12/7 — 35°C) Heating capacity: 20 kW / 5.69 tons (40/45 —7°C) Year of manufacture: 2020 Options: Heat pump. Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi Electric ANB42FPJMT (scroll) Type of refrigerant: R410a Number of fans: 2 pcs. Hydraulic module: 1 pcs. water pump EBARA matrix 5-2t Dimensions: 1.6x0.6x1.8 m. Ffjdpfowp Dq Sjx Adaow Weight: 281 kg. Working hours: 2330 h. Condition: Good CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2018, functionality: fully functional, cooling capacity: 26 kW (35.35 HP), type of input current: three-phase, type of cooling: air, overall weight: 358 kg, input voltage: 400 V, total width: 1,150 mm, total length: 1,300 mm, total height: 1,600 mm, warranty duration: 6 months, heating capacity: 30 kW (40.79 HP), Aircooled Chiller/Heat pump Blue Box Epsilon Echos DK RF HP 26 kW Cooling capacity: 26 kW (12/7 — 35°C) Heating capacity: 30 kW (40/45 — 7°C) Year of manufacture: 2018 Options: Heat pump Heat exchanger: Plate Type of refrigerant: R410A Refrigerant circuit: 1 pcs. Compressors: 1 pcs. Copeland (scroll) Fsdjx Ux T Sepfx Adaefw Number of fans: 1 pcs. high-pressure Dimensions: 1.30 x 1.15 x 1.60 m Weight: 358 kg Working hours: 3 h Condition: Excellent, new CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Dot Eboxwmwustm Noup After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2017, functionality: fully functional, cooling capacity: 16 kW (21.75 HP), type of input current: three-phase, type of cooling: air, overall weight: 227 kg, input voltage: 400 V, total width: 700 mm, total length: 1,100 mm, total height: 1,400 mm, warranty duration: 6 months, heating capacity: 18 kW (24.47 HP), Aircooled chiller/heat pump Blue Box Epsilon Echos 16 kW / 18 kW Ffjdpfx Adjx Uyf Ajajw Cooling capacity: 16 kW (12/7 — 35°C) Heating capacity: 18 kW (40/45 — 7°C) Year of manufacture: 2017 Options: heat pump Heat exchanger: plate Refrigerant circuit: 1 pcs. Compressors: 1 pcs. Siam ( scroll, inverter) Type of refrigerant: R410A Number of fans: 2 pcs. Dimensions: 1.10 x 0.70 x 1.40 m Weight: 227 kg Working hours: 268 h Condition: excellent, new CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Dot Eboxwmwustm Noup After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2016, functionality: fully functional, cooling capacity: 396 kW (538.41 HP), type of input current: three-phase, type of cooling: water, overall weight: 1,740 kg, input voltage: 400 V, total width: 890 mm, total length: 2,650 mm, total height: 1,800 mm, warranty duration: 6 months, heating capacity: 439 kW (596.87 HP), Watercooled chiller/Heat pump Climaveneta Prototipo PDC NX WN 1204 396 kW/439 kW Cooling capacity: 396 kW / 112.6 tons (12/7 — 35°C) Heating capacity: 439 kW / 124.8 tons (40/45 —7°C) Year of manufacture: 2016 Options: Heat pump Refrigerant circuit: 2 pcs. Heat exchanger: Plate Compressors: 4 pcs. Copeland ZP385KCE-TWD-522 (scroll) Type of refrigerant: R410a Dimensions: 2.65x0.89x1.8 m Weight: 1740 kg Working hours: 146/86/136/81 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Dot Eboxwmwustm Noup After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS Fodpfowbd Tdox Adasfw - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2022, functionality: fully functional, cooling capacity: 159.7 kW (217.13 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,960 kg, input voltage: 400 V, total width: 2,220 mm, total length: 3,110 mm, total height: 2,150 mm, warranty duration: 6 months, heating capacity: 178 kW (242.01 HP), Aircooled chiller/Heat pump CLIMAVENETA NECS NR SL S 0704 159.7 kW/178 kW Cooling capacity: 159.7 kW / 45.41 tons (12/7 — 35°C) Heating capacity: 178 kW / 50.61 tons (40/45 —7°C) Year of manufacture: 2022 Options: Heat pump. Recuperation. Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Copeland ZP233KZE-TED-456 (scroll) + 2 pcs. Copeland ZP182KCE-TFD-477 (scroll) Type of refrigerant: R410a Number of fans: 4 pcs. Dimensions: 3.11x2.22x2.15 m. Weight: 1960 kg. Working hours: 0/0/0/0 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Ffsdpfxexpv Dbs Adasw After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2022, functionality: fully functional, cooling capacity: 123 kW (167.23 HP), type of input current: three-phase, type of cooling: water, overall weight: 760 kg, input voltage: 400 V, total width: 1,000 mm, total length: 1,700 mm, total height: 2,000 mm, warranty duration: 6 months, heating capacity: 136.9 kW (186.13 HP), Watercooled chiller/Heat pump Climaveneta NX WN 0402 123 kW/136.9 kW Cooling capacity: 123 kW / 34.97 tons (12/7 — 35°C) Heating capacity: 136.9 kW / 38.93 tons (40/45 —7°C) Year of manufacture: 2022 Options: Heat pump Refrigerant circuit: 1 pcs. Heat exchanger: Plate Compressors: 1 pcs. Bitzer GSU80295VLB4-2 (scroll) + 1 pcs. Bitzer GSU60235VLB4-2 (scroll) Type of refrigerant: R410a Dimensions: 1.7x1x2 m Weight: 760 kg Working hours: 17/16 h. Condition: Outlet Ffjdpfxev Tyd Rj Adaow CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2019, functionality: fully functional, cooling capacity: 44.5 kW (60.50 HP), type of input current: three-phase, type of cooling: air, overall weight: 830 kg, input voltage: 400 V, total width: 1,150 mm, total length: 2,200 mm, total height: 1,500 mm, warranty duration: 6 months, heating capacity: 50.4 kW (68.52 HP), Aircooled chiller/Heat pump Climaveneta AWR HT D LN CA E 0152 44.5 kW/50.4 kW Cooling capacity: 44.5 kW / 12.65 tons (12/7 — 35°C) Heating capacity: 50.4 kW / 14.33 tons (40/45 —7°C) Year of manufacture: 2019 Options: Heat pump. Hydraulic module. Recuperation. Economizer Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Copeland ZH24KVE-TWD-526 (scroll) Type of refrigerant: R407c Number of fans: 6 pcs. Hydraulic module: 1 pcs. water pump EBARA DWC-V/I 300/1.1-Q1AEGG Dimensions: 2.2x1.15x1.5 m Weight: 830 kg Working hours: 0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Dot Eboxwmwustm Noup After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Ffodpfevrwv Iex Adasw By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2019, functionality: fully functional, cooling capacity: 24.7 kW (33.58 HP), type of input current: three-phase, type of cooling: air, overall weight: 265 kg, input voltage: 400 V, total width: 570 mm, total length: 1,450 mm, total height: 1,700 mm, warranty duration: 6 months, heating capacity: 26.1 kW (35.49 HP), Aircooled chiller/Heat pump CLIMAVENETA I BX N 025T HASNV 24.7 kW/26.1 kW Cooling capacity: 24.7 kW / 7.02 tons (12/7 — 35°C) Heating capacity: 26.1 kW / 7.42 tons (40/45 —7°C) Year of manufacture: 2019 Options: Heat pump. Hydraulic module. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi ANB52FFTMT (scroll, inverter) Type of refrigerant: R410a Number of fans: 2 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump Wilo Yonos PARA HF 25/10 (inverter), expansion vessel. Dimensions: 1.45x0.57x1.7 m. Weight: 265 kg. Working hours: 0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Ffedpfx Adexwmg Ajasw Dot Eboxwmwustm Noup After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2019, functionality: fully functional, cooling capacity: 18.7 kW (25.42 HP), type of input current: three-phase, type of cooling: air, overall weight: 205 kg, input voltage: 400 V, total width: 570 mm, total length: 1,450 mm, total height: 1,200 mm, warranty duration: 6 months, heating capacity: 21.7 kW (29.50 HP), Aircooled chiller/Heat pump Climaveneta I-BX-N 020T HANNV 18.7 kW/21.7 kW Cooling capacity: 18.7 kW / 5.32 tons (12/7 — 35°C) Heating capacity: 21.7 kW / 6.17 tons (40/45 —7°C) Year of manufacture: 2019 Options: Heat pump. Hydraulic module. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi DNB36FAEMT (scroll, inverter) Type of refrigerant: R410а Number of fans: 1 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump Wilo Yonos PARA HF 25/10, expansion vessel, buffer tank. Dimensions: 1.45x0.57x1.2 m Ffodsxw U I Ispfx Adajw Weight: 205 kg Working hours: 0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2024, functionality: fully functional, cooling capacity: 22 kW (29.91 HP), type of input current: three-phase, type of cooling: air, overall weight: 433 kg, input voltage: 400 V, total width: 860 mm, total length: 2,050 mm, total height: 1,660 mm, warranty duration: 6 months, heating capacity: 25 kW (33.99 HP), AIRCOOLED CHILLER/HEAT PUMP EMICON PAE 361 KA 22 / 25 KW Cooling capacity: 22 kW / 6.3 tons (12/7 — 35°C) Heating capacity: 25 kW / 7.1 tons (40/45 — 7°C) Year of manufacture: 2024 Ffsdpfevmzrijx Adaew Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper-aluminum Type of refrigerant: R134a Compressors: 1 pcs. Copeland ZH92K4E-TWD-524 (scroll) Number of fans: 2 psc. Dimensions: 2.05x0.86x1.66 m. Weight: 433 kg. Condition: Never used, new CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2025, functionality: fully functional, cooling capacity: 420 kW (571.04 HP), type of input current: three-phase, type of cooling: air, overall weight: 3,955 kg, input voltage: 400 V, total width: 2,300 mm, total length: 5,600 mm, total height: 2,500 mm, warranty duration: 6 months, heating capacity: 451 kW (613.19 HP), Aircooled chiller/Heat pump Panasonic ECO I W AQUA 450 H 420 kW/451 kW Cooling capacity: 420 kW / 119.42 tons (12/7 — 35°C) Heating capacity: 451 kW / 128.24 tons (40/45 —7°C) Year of manufacture: 2025 Options: Heat pump Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 4 pcs. Bitzer GSD80485VLB4-2 (scroll) Type of refrigerant: R410a Number of fans: 10 pcs. (EC-fans) Dimensions: 5.6x2.3x2.5 m. Weight: 3955 kg. Working hours: 6/6/6/6 h. Condition: New CONDITION, TESTING & READINESS Ffodpfx Adswnqu Isaew The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2018, functionality: fully functional, cooling capacity: 308.3 kW (419.17 HP), type of input current: three-phase, type of cooling: air, overall weight: 2,899 kg, input voltage: 400 V, total width: 2,200 mm, total length: 4,600 mm, total height: 2,650 mm, warranty duration: 6 months, heating capacity: 333 kW (452.75 HP), Aircooled chiller/Heat pump Systemair SYSCROLL.330.AIR 308.3/333 kW Cooling capacity: 308,3 kW (12/7 — 35°C) Heating capacity: 333 kW (40/45 —7°C) Year of manufacture: 2018 Heat exchanger: Plate Refrigerant circuit: 2 pcs. Compressors: 4 pcs. Copeland (scroll) Number of fans: 8 pcs. Fodsxxkflepfx Adaefw Type of refrigerant: R410A Dimensions: 4.6 x 2.2 x 2.65 m Weight: 2899 kg Condition: Excellent, Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 46 kW (62.54 HP), type of input current: three-phase, type of cooling: air, overall weight: 507 kg, input voltage: 400 V, total width: 1,100 mm, total length: 2,250 mm, total height: 1,750 mm, warranty duration: 6 months, heating capacity: 54 kW (73.42 HP), Aircooled chiller/Heat pump SYSTEMAIR AQR290-H050.PROTO 46/54kW Cooling capacity: 46 kW / 13 tons (12/7 — 35°C) Heating capacity: 54kW / 15,3 tons (40/45 —7°C) Year of manufacture: 2023 Options: Heat pump Heat exchanger: Plate Refrigerant circuit:1 pcs. Compressors: 2 pcs. Copeland (scroll) Fsdpjvnmm Usfx Adaefw Type of refrigerant: R290 Number of fans: 1 pcs. Dimensions: 2.25x1.1x1.75 m Weight: 507 kg Working hours: 0/0 h. Condition: outlet, new CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2018, functionality: fully functional, cooling capacity: 306 kW (416.04 HP), type of input current: three-phase, type of cooling: water, overall weight: 1,500 kg, input voltage: 400 V, total width: 950 mm, total length: 3,400 mm, total height: 2,000 mm, warranty duration: 6 months, heating capacity: 340 kW (462.27 HP), Watercooled chiller/Heat pump Climaveneta NX WN 1004 306 kW/340 kW Cooling capacity: 306 kW / 87.01 tons (12/7 — 35°C) Heating capacity: 340 kW / 96.68 tons (40/45 —7°C) Year of manufacture: 2018 Options: Heat pump. Hydraulic module. Kiplink Refrigerant circuit: 2 pcs. Heat exchanger: Plate Compressors: 4 pcs. Copeland ZP295KCE-TWD-522 (scroll) Type of refrigerant: R410a Hydraulic module: 2 pcs. water pump Grundfos TPED 80-210/2 Dimensions: 3.4x0.95x2 m Weight: 1500 kg Working hours: 0/0/0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: Fodpsv S Tzyofx Adajfw - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2021, functionality: fully functional, cooling capacity: 44.9 kW (61.05 HP), type of input current: three-phase, type of cooling: air, overall weight: 610 kg, input voltage: 400 V, total width: 1,200 mm, total length: 1,900 mm, total height: 2,000 mm, warranty duration: 6 months, heating capacity: 53.1 kW (72.20 HP), Aircooled chiller/Heat pump Climaveneta NX N G06 LN K 0202P 44.9 kW/53.1 kW Cooling capacity: 44.9 kW / 12.77 tons (12/7 — 35°C) Heating capacity: 53.1 kW / 15.1 tons (40/45 —7°C) Year of manufacture: 2021 Options: Heat pump Refrigerant circuit: 1 pcs. Heat exchanger: Plate Ffsdpjv Tnh Djfx Adaew Condenser: Copper / Aluminum Compressors: 2 pcs. Bitzer GSU60120VLB4-2 (scroll) Type of refrigerant: R454B Number of fans: 4 pcs. Dimensions: 1.9x1.2x2 m. Weight: 610 kg. Working hours: 0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 66.7 kW (90.69 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,060 kg, input voltage: 400 V, total width: 1,100 mm, total length: 2,600 mm, total height: 2,400 mm, warranty duration: 6 months, heating capacity: 49.4 kW (67.17 HP), Aircooled chiller/Heat pump CLIMAVENETA MEHP IS G07 0082 66.7 kW/49.4 kW Cooling capacity: 66.7 kW / 18.97 tons (12/7 — 35°C) Heating capacity: 49.4 kW / 14.05 tons (40/45 —7°C) Year of manufacture: 2023 Options: Heat pump. Hydraulic module. Kiplink. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Fedpjx Uyudsfx Adasfw Compressors: 1 pcs. Mitsubishi BVK110FBAMT (scroll, inverter) + 1 pcs. Mitsubishi BV110YBAMT (scroll) Type of refrigerant: R32 Number of fans: 3 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump Grundfos MGE80A 1-56C-IA-110 (Frequency inverter) Dimensions: 2.6x1.1x2.4 m Weight: 1060 kg Working hours: 0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 366 kW (497.62 HP), type of input current: three-phase, type of cooling: air, overall weight: 3,203 kg, input voltage: 400 V, total width: 2,260 mm, total length: 5,300 mm, total height: 2,410 mm, warranty duration: 6 months, heating capacity: 349.9 kW (475.73 HP), Aircooled chiller/Heat pump LENNOX GAH370DP2M 366 kW/349.9 kW Cooling capacity: 366 kW / 104.07 tons (12/7 — 35°C) Fsdpjx Rbw Ejfx Adaofw Heating capacity: 349.9 kW / 99.49 tons (40/45 —7°C) Year of manufacture: 2023 Options: Heat pump. Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 6 pcs. Danfoss DSF270A4AAA (scroll) Type of refrigerant: R32 Number of fans: 8 pcs. (EC-fans) Dimensions: 5.3x2.26x2.41 m. Weight: 3203 kg. Working hours: 63/60/76/92/95/92 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2016, functionality: fully functional, cooling capacity: 441.9 kW (600.82 HP), type of input current: three-phase, type of cooling: water, overall weight: 3,570 kg, input voltage: 400 V, total width: 1,000 mm, total length: 4,200 mm, total height: 2,200 mm, warranty duration: 6 months, heating capacity: 456.9 kW (621.21 HP), Watercooled chiller/Heat pump Climaveneta FOCS2 W H CA E 1601 441.9 kW/456.9 kW Cooling capacity: 441.9 kW / 125.65 tons (12/7 — 35°C) Heating capacity: 456.9 kW / 129.92 tons (40/45 —7°C) Year of manufacture: 2016 Options: Heat pump. Economizer. Fodowyvnqjpfx Adaofw Refrigerant circuit: 1 pcs. Heat exchanger: Shell and tube Compressors: 1 pcs. Bitzer CSW9563-140CVY-40D (screw) Type of refrigerant: R134a Dimensions: 4.2x1x2.2 m Weight: 3570 kg Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2019, functionality: fully functional, cooling capacity: 96.7 kW (131.48 HP), type of input current: three-phase, type of cooling: water, overall weight: 520 kg, input voltage: 400 V, total width: 950 mm, total length: 1,250 mm, total height: 1,650 mm, warranty duration: 6 months, heating capacity: 107 kW (145.48 HP), Watercooled chiller/Heat pump Climaveneta NX W Y H 0302 96.7 kW/107 kW Cooling capacity: 96.7 kW / 27.5 tons (12/7 — 35°C) Heating capacity: 107 kW / 30.42 tons (40/45 —7°C) Year of manufacture: 2019 Options: Heat pump Refrigerant circuit: 1 pcs. Heat exchanger: Plate Compressors: 2 pcs. Copeland ZP182KCE-TFD-477 (scroll) Type of refrigerant: R410a Dimensions: 1.25x0.95x1.65 m Weight: 520 kg Working hours: 56/36 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Fsdpfx Aev Tw U Todaefw Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 53.6 kW (72.88 HP), type of input current: three-phase, type of cooling: air, overall weight: 701 kg, input voltage: 400 V, total width: 2,250 mm, total length: 1,400 mm, total height: 1,800 mm, warranty duration: 6 months, heating capacity: 54 kW (73.42 HP), Aircooled chiller/Heat pump LENNOX GAH055SM2M 53.6 kW/54 kW Cooling capacity: 53.6 kW / 15.24 tons (12/7 — 35°C) Heating capacity: 54 kW / 15.35 tons (40/45 —7°C) Year of manufacture: 2023 Options: Heat pump Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Copeland ZP120KCE-TFD-455 (scroll) Type of refrigerant: R410а Number of fans: 2 pcs. (EC-fans) Dimensions: 1.4x2.25x1.8 m. Weight: 701 kg. Working hours: 74/58 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Ffjdsx Rbt Hjpfx Adasw By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2016, functionality: fully functional, cooling capacity: 251 kW (341.26 HP), type of input current: three-phase, type of cooling: water, input voltage: 400 V, total width: 1,100 mm, total length: 1,600 mm, total height: 1,950 mm, warranty duration: 6 months, heating capacity: 282 kW (383.41 HP), Watercooled chiller/Heat pump Climaveneta NX WN 802 251 kW/282 kW Cooling capacity: 251 kW / 71.37 tons (12/7 — 35°C) Heating capacity: 282 kW / 80.19 tons (40/45 —7°C) Year of manufacture: 2016 Options: Heat pump Refrigerant circuit: 1 pcs. Heat exchanger: Plate Compressors: 2 pcs. Copeland ZP485KCE-TWD-522 (scroll) Type of refrigerant: R410a Dimensions: 1.6x1.1x1.95 m Working hours: 124/102 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS Ffsdpfxev S Dlio Adaow - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.