Used Thermal Platesetters for sale (1,320)

Condition: used, functionality: fully functional, Micro and mini plasma welding generator, complete with torch and power cables. Suitable for welding stainless steel with thicknesses ranging from 0.5 to 1.00 mm. Podpfxjzlud Ej Aa Hjgr Power supply: 380-41.5V (12A). Maximum welding current: 150A, with a welding speed of 5 to 10 mm/sec.

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, FLOW & THERMAL Regenerative Thermal Oxidizer (RTO), 18,000 Nm³/h (2021) Complete industrial system for the treatment of process water containing Volatile Organic Compounds (VOCs), consisting of stripping columns and a three-chamber Regenerative Thermal Oxidizer. Pgodjzvcknjpfx Aa Her Manufactured by Flow & Thermal Solutions / TECAM in 2021, the equipment was installed at a PET production plant and remained operational until the factory closed on 27 November 2025. The system removes VOCs from the water by means of air stripping and subsequently destroys them in the RTO through high-temperature thermal oxidation. Heat recovery through ceramic media helps reduce natural gas consumption. Main features • Manufacturer: Flow & Thermal Solutions / TECAM • Year: 2021 • Serial number: F002 • RTO nominal capacity: 18,000 Nm³/h • Configuration: three-chamber regenerative RTO • Fuel: natural gas • Honeywell / Eclipse TJ 200 burner • Burner output: 58–586 kW • Electrical supply: 400 V, 50 Hz • Electrical power stated on the nameplate: 40 kW • 30 kW Soler & Palau ATEX main fan • Siemens PLC automation with HMI touchscreen • LEL monitoring, purge, dilution, bypass and pneumatic valve systems • Vertical stack: 10 m high, diameter: 800 mm • CE marked Performance and operation The equipment operated at actual flow rates close to its nominal capacity, with recorded values ranging from approximately 16,400 to 17,900 Nm³/h. The latest available emissions test, carried out by DEKRA in December 2023, recorded the following values: • TOC: 13 mgC/Nm³ • NOx: 3–4 mg/Nm³ • CO: 125–153 mg/Nm³ During the tests, the equipment operated at an approximate temperature of 775–780 °C, with a treated water flow rate of 3.5 m³/h. Stripping columns The system includes: • Original stripping column, designed for approximately 6 m³/h. • Second Tecnium SLFKK9 stripping column, manufactured in PPH, with a nominal capacity of 8 m³/h and a maximum capacity of 10 m³/h. The second column was installed, but it is currently dismantled and lying on the ground after being knocked down by strong winds during the winter. It has a hole in the base which, according to the available information, is considered potentially repairable. The Tecnium column is equipped with internal packing, distributors, a mist eliminator, connections, drainage and provisions for integration with the existing control system. Condition and maintenance The system remained operational until the final closure of the plant in November 2025. The latest preventive maintenance was carried out by TECAM in June 2025 and included mechanical and electrical inspection, burner, fans, stripping columns, instrumentation, valves and functional testing. The equipment was operational, although maintenance work is required before recommissioning, mainly involving: • Process valves • Internal insulation of the towers • Ductwork and seals • Main fan impeller and expansion joints • Repair of the base of the second stripping column TECAM technical documentation is available regarding the recommended works, and several spare parts are also available. Scope of supply The system includes: • Three-chamber RTO • Combustion chamber • Burner and gas train • Main fan • Two stripping columns • Dilution and purge system • Hot bypass • LEL analysers • Stack • Ductwork • Electrical cabinets and controls • Platforms, ladders and support structures • Available spare parts

Condition: as good as new (ex-display), High-definition HD generator for plasma cutting. From warehouse stock. Available for immediate delivery, subject to prior sale. Pedsg Tcufspfx Aa Hegr A great opportunity.

Year of construction: 2018, condition: new, FireMaster Morgan Thermal Ceramics FireMaster® Marine Plus FM-MP69/16X14640X610S SUPER DISCOUNT! 19 Euro pallets available Psdpfx Aajh Rawue Hogr 16 boxes on each euro pallet x 19 euro pallets = approximately 304 boxes Material dimensions: Thickness 13 mm Width 620 mm Length 14,640 mm Density kg / m3: 96 Price per box 100 EUR + VAT In total there are about 304 boxes. Total price 30,400 Euro + VAT, negotiable , FCA: Satu Mare / Romania Manufactured from FireMaster® Plus fibre, FireMaster® Marine blanket is a highly insulating blanket especially developed for fire protection Plus applications that are very space or weight sensitive Classification temperature FireMaster® Marine Plus blanket: 1200°C (2192°F) Fire reaction properties Non-Combustible in accordance with IMO FTP Code Part 1 Index < 0.5 when tested in accordance with UK MOD Defence Standard 02-713 Class A1 Reaction to Fire in accordance with EN 13501-1 Thermal insulation performance Thermal insulation at ambient temperatures R Values (m² K/W) and corresponding U values (W/m²K). For densities above 80 kg/m³ the values for 80 kg/m³ may be used Basis Thermal conductivity measured at 10°C using BS EN 12667 method 48 kg/m³ 0.0321 W/mK 64 kg/m³ 0.0319 W/mK 70 kg/m³ 0.03164 W/mK 80 kg/m³ 0.03144 W/mK Thermal conductivity at high temperatures Thermal conductivity (W/mK) at mean temperature measured using ASTM C201 method Please check the attachment with the technical data. We reserve the right to make mistakes, changes and prior sale Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 1985, condition: used, machine/vehicle number: 60802 A 17983 J, cutting circuit: bis 400 A Psdpfs Sdrfsx Aa Hogr space needed: 820 x 1220 x 930 mm weight: 750 kg

Condition: ready for operation (used), Year of construction: 2001, Used Ecotack thermal laminating machine Maximum sheet format: 102x142 cm Maximum speed: 75m/ minute Complete with vacuum register station Calender diameter: 450mm with oil heated central Roll elevator Pjdpfx Aozt R Enoa Hjgr Automatic separator Spared rubberized roller Automatic separator Cooling roller with refrigerator Corrugated for light paper Automatic stacker

Year of construction: 2008, condition: used, functionality: fully functional, machine/vehicle number: NETZSCH TDW 4240, For sale is a used NETZSCH TDW 4240 hot box test chamber from our testing center. This system is used to determine the thermal transmittance or thermal transmittance coefficient (U-value) of components and structures under defined temperature conditions. Typical applications: Pgjdpfx Aaezwf T Io Her Windows Doors Facade and wall elements Panels and sandwich structures Other building envelope components Corresponding test openings are available for testing windows and doors. The system is particularly suitable for testing laboratories, research and development facilities, and manufacturers of windows, doors, facades, panels, and other construction products who wish to investigate the thermal properties of their products. Due to a realignment of our testing capacity, the hot box is being sold and can be acquired under very favorable conditions. Dismantling and transport: The system is currently located at our testing center. We would be happy to assist the buyer with dismantling, loading, and organizing the transport, as well as answer any questions regarding re-installation, and we can work together to find a suitable solution. An on-site inspection of the system is possible by appointment. We will gladly provide further technical information, photos, and documents upon request.

Condition: good (used), Year of construction: 1996, BERTRANS HT594 THERMAL OIL BOILER Automatic vertical thermal oil boiler manufactured by BERTRANS, equipped with a WEISHAUPT modulating burner. TECHNICAL DATA Manufacturer: BERTRANS Model: HT594 Boiler type: Thermal oil boiler Configuration: Vertical Operation: Automatic Thermal oil volume: 6.01 m³ Maximum working pressure: 35 bar Manufacturing number: M1101009/IB Burner manufacturer: WEISHAUPT (2003) Burner model: WKG 3/0-A ZM Burner output range: 1,200–12,000 kW Burner serial number: 4,177,116 Pgsdpfezvf Rkox Aa Hjr

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, KOPPENS BR 4500/600 | Continuous frying machine for thermal oil Manufacturer: Koppens Convenience Food Systems Model / Type: BR 4500/600 Serial number: 1219 Psdpfx Aszutgkea Hegr Year of manufacture: 1998 Power supply: 400 V, 50 Hz, 3 phases, 27 A, 13 kW Working width of the belt: 550 mm Loading height: 925 mm Discharge height: 950 mm Machine weight: 1250 kg Oil heating system: Indirect - coil for thermal oil Maximum coil power: 180 kW Chamber capacity (frying oil): min. 845 liters (max. level above the belt: 80 mm) Frying time: Continuously adjustable in the range of 25 - 250 seconds Belt speed: Continuously adjustable in the range of 1.08 - 10.8 m/min The industrial continuous frying machine Koppens BR 4500/600 is a highly efficient and uncompromising solution designed for professional meat processing plants, poultry processing, fish processing, and convenience food manufacturers. The machine is designed for continuous, immersion frying of a wide range of products – from nuggets, burgers, and breaded cutlets to croquettes and fish fingers. Thanks to the use of a 550 mm wide belt, the device offers a huge throughput while maintaining perfectly consistent quality and color of the finished product, eliminating the problem of undercooked or burnt batches. The heating system based on indirect heat exchange through a coil powered by thermal oil (up to 180 kW) is the most desirable solution in the industry. Unlike electric heaters, thermal oil guarantees a very stable and uniform temperature along the entire length of the frying tank. This protects the edible oil from localized overheating and excessive degradation (oxidation). The mechanical system for lifting the top cover (hood) provides immediate and safe access to the working area, allowing the crew to quickly inspect and effectively perform foam cleaning.

Condition: used, functionality: unexamined, Used Netzsch thermal analyzer set consisting of a computer with components and software, analyzer (STA 409 EP), controller (TASC 414/3), and power supply (Pu 1.851.405). Manufacturer: Netzsch Model: STA 409 EP | TASC 414/3 | Pu 1.851.405 Pgsdezv Snijpfx Aa Hor Voltage: 230V (50/60Hz)

Condition: good (used), Year of construction: 2006, machine/vehicle number: PL001240, Thermal CTP (Computer to Plate) Throughput option (plates/h in max. format) : 14 Plates / Hour Min. Plate Format : 370 x 323 mm Pgsdefmmyzspfx Aa Hsr Maks. Plate Format : 930 x 1140 mm Plate Thickness : 0,15 - 0,3 mm Technical data can vary according to job, consumables and possible other factors

Condition: excellent (used), Year of construction: 2009, Single Cassette Autoloader SA-L 8000 Pgjdpfx Aajzqudco Hor Extra Cassette für SA-L 8000 PLATE STACKER PST 480C Plate Size Max: 1,160 x 940 mm Plate Size Min: 450 x 370 mm 20 plates/hr at 2,400 dpi

Condition: new, Year of construction: 2024, functionality: fully functional, Wood thermal modification kiln fully equipped for thermo wood production, included: 15 m high AISI 316L isolated double wall chimney, inlet/outlet piping, pressure valves, gages, air compressor, full wood pellet heating unit, Siemens control panel, timber loading/unloading platform, 2 sets of timber spacers. Timber volume 7...8 m3, depends on bord dimensions and length; Inner chamber for timber length up to 7,5 m, total kiln length 10 m; Full thermal modification cycle time ~24 h from heating up to cooling down; Temperature can be set up to 230°C or more if needed; Required nominal grid power 25 A, can be used without grid with power generator; To produce 1 m3 thermally modified timber: 9...10 kWh + 55...60 kg wood pellets = 16...20 EUR without labor costs; Pgodpfxjvzub Hs Aa Hor Our wood thermo modification kilns can be made according to customers needed length from 3,6 to 9 m (from 3 to 9 m3 timber volume);

Year of construction: 2017, condition: ready for operation (used), A combined hot riveting and forming system for plastic components is available. Power: 38kW, Control: PLC, Weight: approx. 1850kg. Documentation available. An on-site inspection is possible. Pgjdpfjzfp H Ijx Aa Hjr

Year of construction: 2016, condition: ready for operation (used), Heating output: 1100kW, medium: heat transfer oil, oil type: Maroltherm LH, max. flow temperature: 300°C, permissible operating temperature: 300°C, permissible operating overpressure: 10bar, volume flow: 51m³/h, max. flue gas temperature: 400°C, flow monitoring (differential pressure): 0.1bar-0.36bar, cold start volume flow: 0.1bar, filling capacity: 1500l. Documentation available. On-site inspection is possible. Pjdpfx Aowtg Hdoa Hogr

Condition: excellent (used), Weiss TS 130 Temperature Shock Test Chamber Manufacturer: Weiss Umwelttechnik GmbH Type: TS 130 Machine Type: Temperature Shock Test Chamber Pgsdpfx Aaozp D D Ne Hor Test Chamber Volume: approx. 130 liters Operating Hours: approx. 108.7 hours For sale is a used Weiss TS 130 temperature shock test chamber with S!MCON/32 control system. The two-chamber system enables rapid temperature changes between a hot chamber and a cold chamber. The test specimen is moved between the chambers using a lift basket. Suitable for temperature cycling and temperature shock tests, material testing, quality assurance, electronics testing, as well as research and development. Temperature Data: Temperature Range Hot Chamber: +60 °C to +220 °C Temperature Range Cold Chamber: −10 °C to −80 °C Switching Time between Hot and Cold Chamber: approx. 10 seconds Temperature Stability: approx. ±1 K Test Chamber: Test Chamber Volume / Lift Basket: approx. 130 liters Dimensions Lift Basket (W × D × H): approx. 500 × 600 × 450 mm Maximum Load of Lift Basket: 20 kg Maximum Load per Insert Shelf: 10 kg Electrical Data: Power Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated Power: 14.0 kW Rated Current according to Nameplate: 26.0 A Connection: CEE 32 A Recommended Fuse: 35 A slow-blow Protection Class: IP20 Refrigeration System: Refrigerant: R404A, Filling Quantity 2.2 kg Refrigerant: R23, Filling Quantity 1.2 kg Maximum Low Pressure: 18 bar Maximum High Pressure: 25 bar Standing Pressure: 11 bar Cooling Water Data: Water Inlet Pressure: 2–6 bar Connection: R 1/2 inch Cooling Water Consumption at Full Load: approx. 0.3–0.6 m³/h Maximum Particle Size: 40 µm Dimensions and Weight: External Dimensions (W × D × H): approx. 1,820 × 900 × 1,990 mm Width Including Door Hinge: approx. 1,850 mm Depth Including Removable Door: approx. 1,155 mm Additional Depth of Removable Touch Panel: max. 170 mm Weight of Test Chamber without Options: approx. 950 kg Weight of Separate Cooling Unit: not determined Equipment: S!MCON/32 control system with external touch panel Two-chamber design with lift basket Viewing window Adjustable temperature limiter Digital and analog I/O RS232 and RS485/RS422 interfaces Potential-free contact Connection for external Pt100 sensor Separate cooling unit as shown in the pictures SIMPATI 3.0 software and extensive documentation as shown in the pictures Condition and Scope of Supply: Used Operating hour counter shows approx. 108.7 hours. Optical condition as shown in the pictures. Scope of supply includes separate cooling unit, software, documentation and accessories, exclusively as shown in the pictures. Loading and shipping via forwarding agent possible upon agreement. Subject to changes, errors and prior sale.

Condition: good (used), Year of construction: 2019, functionality: fully functional, Brand: Grotius Control system: Linux CNC Working area: 3000 x 1500mm Length (mm): 4020mm Pgodpezupvuefx Aa Her Width (mm): 2330mm Height (mm): 1570mm Description: Includes Thermal Dynamics A40i plasma source & various wear parts.

Condition: used, Thermal Laser CTP Amsky Ausetter T 424 with only 7066 Plates produced. Thermal Laser CTP Amsky Ausetter T 424 Thermal Belichter / Thermal Laser Plate Size min. 300 x 400mm - max. 660 x 800mm 2400DPI  24 Channel Laser Plate Thickness 0.15 - 0.30mm Manual Plate Loading Include RIP and Compressor Pgedpfx Aeyllbpsa Her Geschwindigkeit / Speed max. 15 Plates/per hour Nur 7066 Platten Belichtet / Only 7066 Plates produced Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), The Freeman FUSING 48M is a professional machine designed for the thermal bonding of materials using temperature, pressure, and a conveyor belt. The device is used in the apparel, footwear, and leather industries, as well as in the production of laminated materials. Psdpfx Aaezgx Idj Hogr The machine enables the durable bonding of interlinings, adhesive layers, and other reinforcing materials to fabrics and leather. Thanks to adjustable temperature, pressure, and belt speed, it allows for precise adjustment of operating parameters to suit the material being processed. Technical specifications: Manufacturer: Freeman Model: FUSING 48M Serial number: 9315 Power supply: 220 V 1 phase (1PH) Temperature control Pressure control Belt speed control Heated conveyor belt Pressure gauge Feeding and receiving table Steel construction Manufacturer: The Louis G. Freeman Co., USA Applications: Bonding of interlinings and apparel linings Lamination of fabrics and technical materials Production of clothing and leather goods Bonding of materials using heat-activated adhesives Heat transfer and fixing of appliques

Condition: excellent (used), Mettler Toledo Model: TGA/DSC 3+ Mettler Toledo TGA/DSC 3+ HT Thermoanalysis System + GC401 + XP5U + Huber Ministat – incl. STAR Software & Dongle For sale is a complete, fully operational thermoanalysis system from Mettler Toledo in high-temperature configuration (up to approx. 1600 °C), including software license (STARᵉ) with hardware lock (dongle). System configuration: - TGA/DSC 3+ (combined thermogravimetry + DSC) - High-temperature furnace (HT, up to approx. 1600 °C) - Sensor: FRS2 SDTA - Gas controller: GC 401 - Microbalance: XP5U - Temperature control system: Huber Ministat 230-MT (Pilot ONE) - Software: STARᵉ Software Version 16.00b - License: Hardware lock (USB dongle, green) Software & license: Included in delivery: - STARᵉ Software (Version 16.00b) - Original hardware lock (USB dongle) Functions: - Thermogravimetry (TGA) – Mass change (µg range) Pgodoyxcqvopfx Aa Hor - DSC / SDTA – Heat flow measurement (mW range) - Temperature analyses up to high-temperature range - Measurements under defined gas atmosphere Technical data (excerpt): - Temperature range: RT up to approx. 1600 °C - Heating rate: typically 10 K/min - Gas flow: Air: 30 ml/min Nitrogen: 20 ml/min - Temperature accuracy: Indium: ±1.5 °C Aluminum: ±2.5 °C Gold: ±3.0 °C Palladium: ±4.0 °C - Weighing accuracy: 1 g: ±50 µg 5 g: ±250 µg Temperature control unit Huber Ministat 230-MT: - Temperature range: -40 °C to +200 °C - Voltage: 230 V - Power consumption: max. 11 A Dimensions & weight: - Total weight: approx. 100–150 kg - Multi-component system (laboratory equipment) Scope of delivery: - Complete TGA/DSC system - High-temperature furnace - GC 401 gas controller - XP5U balance - Huber Ministat 230-MT - STARᵉ Software incl. USB dongle - Documentation and accessories as shown in the photos Important note: "The table shown in the photos is not part of the sale." Condition: used Scope of delivery: (see pictures) (Specifications subject to change and errors!) For further inquiries, please feel free to contact us by phone.

Condition: excellent (used), Mettler Toledo DSC 3 STARe System FRS5+ – Thermal Analysis System (DSC3/500) incl. accessories, PC, and balance Manufacturer: Mettler Toledo Model: DSC 3 STARe System Specification: DSC3/500 Description: For sale is a professional thermal analysis system, Mettler Toledo DSC 3 STARe System equipped with FRS5+ sensor. The device is used for the analysis of thermal material properties via Differential Scanning Calorimetry (DSC). The system comes from a professional laboratory environment and is in well-maintained used condition. The last maintenance by Mettler Toledo was carried out on 08/04/2025; the next maintenance is scheduled for 04/2027. Applications: - Research and development - Quality assurance - Material testing - Analysis of polymers and materials Functions: - Determination of melting points and glass transitions - Analysis of crystallization and phase transitions - Measurement of heat capacity (Cp) - Investigation of reaction kinetics (curing, decomposition) - Purity analysis - Determination of oxidation induction time (OIT) Technical data: - System: DSC 3 STARe System - Specification: DSC3/500 - Sensor: FRS5+ - Furnace power: 200 W - Cooling: air cooled - Lid: Automatic - Power supply: 230 V / 50–60 Hz - Fuse: 6 A - Power rating: max. 600 VA - Software: STARe Software V16.30 - Operating system: Windows 10 - Dimensions (approx.): 60 x 55 x 55 cm - Weight (approx.): 55–65 kg Pedpfx Asy Drl Hea Hjgr Workstation / PC: - Dell Optiplex control PC with monitor - Windows 10 installed - STARe Software V16.30 Additional equipment: - Thermal analysis package DSC3/500 - DSC 500 accessory kit - Crucible sealing apparatus - Mettler Toledo precision balance (analytical balance) - Weighing range: 42 g / 120 g - Readability: 0.01 mg / 0.1 mg Scope of delivery: - Mettler Toledo DSC 3 main unit - Touchscreen control unit - FRS5+ sensor - Control PC (Dell Optiplex) with monitor - DSC 500 accessory kit - Crucible sealer - Precision balance - Accessories as shown in the pictures - Documentation and training materials - USB sticks / data media Condition: Used, from a laboratory environment, well-maintained. Notice: The scope of delivery is determined by the pictures. The table shown in the photos is not included in the offer. Miscellaneous: Commercial sale. Invoice with VAT available. Inspection possible by appointment. Subject to prior sale and errors.

Condition: excellent (used), Mettler Toledo Type: TGA/DSC 1 STAR® Description For sale is a METTLER TOLEDO TGA/DSC 1 STAR® system, a high-quality and precise laboratory instrument for thermal analysis of materials. The device combines thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) in a single system, making it ideal for applications in industry, research, materials testing, and quality assurance. Features & Applications - Thermogravimetric analysis (mass changes) - DSC analysis (heat flow, melting points, Tg) Pgodpfxozix Dds Aa Hor - Analysis of plastics, polymers, chemicals, pharmaceuticals, and materials - Temperature- and time-dependent measurements - High precision and stability - Network and PC-connectable (STAR® system) Technical Data (approx.): - Dimensions: approx. 500 × 500 × 600 mm - Manufacturer: METTLER TOLEDO - Model: TGA/DSC 1 STAR® - Sensor type: SDTA FRS2 - Power supply: 100–240 V / 50–60 Hz - Power consumption: approx. 300–600 W - Weight: approx. 35–45 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and correction!) Please feel free to contact us by phone for further questions.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Walk-in temperature chamber for testing, trials, or production processes Temperature range: +40°C to +80°C with a control accuracy of +/- 1°C Air conditioning via recirculation air handling unit (approx. 3000 m³/h) and electric heating, approx. 6 kW External dimensions: 4800 x 3200 x 2430 (depth, width, height in mm) Internal dimensions: 4560 x 2960 x 2160 (depth, width, height in mm) Chamber area: approx. 13.5 m² Chamber volume: approx. 29.2 m³ Equipment: Pjdpjzpy Idsfx Aa Hegr - Door with a width of 1200 mm and a height of 2000 mm, with a pre-installed ramp for convenient loading - Viewing window in the door - Floor elements made of 1.5 mm non-slip stainless steel tread plate, glued onto a 15 mm thick, water-resistant laminated pressure distribution plate. Slip resistance class R11. Permissible wheel load: 2500 N - High-quality insulation with 120 mm polyurethane high-temperature foam, U-value according to DIN EN 13165: 0.17 W/m²*K - Temperature-resistant LED ceiling lighting - Temperature-resistant cable duct on the right and left sides with a total of 6 230V sockets - Siemens S7-1200 control system and 7" color touch panel - Integrated PID control for temperature - Recording and graphical display of the temperature profile - Plain text display of fault messages and history tracking, as well as password protection - Potential-free switching contacts for alarm forwarding Electrical connection: AC400V / 3Ph/N/PE / 50 Hz The system can be inspected by arrangement. The buyer must dismantle and remove the system. As the operating location has been closed, no assistance with logistics can be provided.

Condition: used, No. 3213 Pedpfsv Si Szsx Aa Hogr Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Year of construction: 2024, condition: used, machine/vehicle number: 2333470, Thermal reactor Pedpfx Aeziltrsa Hogr