Used Heating Plate Press for sale (48,196)

Condition: excellent (used), Year of construction: 2016, operating hours: 27 h, SBL 1060 SE Year: 2016 Sheet feeder: Manual non-stop pile feeder Material range: Paper and board from 470 × 350 mm to 1060 × 760 mm Max cutting format: 1050 × 740 mm Min sheet size: 470 × 350 mm Max sheet size: 1060 × 760 mm Max cutting pressure: 300 tons Material thickness: 0.1 – 2 mm (corrugated/laminated max 4 mm) Min gripper margin: 9.5 mm Max inside chase size: 1155 × 852 mm Cutting plate size: 1076 × 756 mm Max speed: 8,000 sheets/hour Power consumption: Total 32 kW (22 kW + 10 kW for lower plate heating) Machine dimensions (L×W×H): 5,900 × 5,700 × 2,615 mm Max pile height – feeder (with pallet): 1,750 mm Max pile height – delivery (with pallet): 1,450 mm Feeder Section - Pneumatic feeder table - Non-stop manual feeder system - Anti-static system - Pre-pile device - Manual suction group adjustment - Micrometric suction adjustment - Motorized side pile adjustment - Suction belt feeder table - High-pressure lubrication pump - 2 pneumatic side register guides - Electronic control of front and side register Cutting/Embossing Section - Automatic pressure adjustment up to 300 tons - Preparation and introduction table for die frames in platen - 2 quick-lock die chase frames with bottom plate - Pneumatic locking of the chase and lower supporting plate - Centerline System - Micrometric system Hjdpfxowypp Ij Aabjfn - Heated lower support plate (24 mm) - Cutting plate: 4 mm - Compensation plate: 3 mm - Archiveable 1 mm thin cutting plate Stripping Section - Quick lock for upper and central stripper frames - 2 standard upper stripper frames - 2 standard lower stripper frames - Double accessory kit for lower stripper prep (pins, bars, clamps, etc.) Delivery Section - High-pile automatic non-stop delivery with conveyor - Guillotine for automatic removal of gripper margin waste - Sheet deceleration device - Tab insertion device

Condition: ready for operation (used), Heavy hydraulic press Hfsdeu R U Szopfx Aabon

Condition: good (used), Laenge: About 2430 mm Width: About 1520 mm Heithrange: About 540 mm Hfjdpfx Aaod Nmdfobsn

Year of construction: 2025, condition: as good as new (ex-display), Vacuum - membrane press VP - series are the ideal solution for the wood processing industry. VP 3000 is equipped with heating technology, which reduces the drying time of the adhesive so that the performance is higher. Usage possibilities: Veneers / form gluing / wrapping... Coating of different profiles (veneer, paper, plastic...) Wood bending: Production of bent and glued components The heating system is equipped with temperature control Rubber membrane 2.5 mm Table top is made of plastic 12 mm Hjdpfxsdvltys Aabefn Oil-free Becker vacuum pump 25 m3/h The control system of vacuum / Tankinhalr 15 l Work surface: 3000x1500mm Heating system temperature: Max 60 degrees C Heating system: KW 4,5 Pump output: KW 0.75 Vacuum pump capacity: 25 m3/h Rubber membrane Dimensions exterior: 3100 x 1650 x 1600 mm Weight: 450 kg Location: Off the shelf 54634 Bitburg -free load-

Condition: used, Working width 3450 mm Hfodpfx Aaowqr R Ajbsn Working height 2000 mm Number of cylinders 5 St. loading dimensions L x W x H 3600 x 1200 x 2720 mm Hess "Multipress" Perforated Plate Press For all sloped, segmental, and round-arch windows and doors. Also for interior work or frame construction. For gluing staircase block joints and much more. Largest working area approx. 3450 x 2000 mm External dimensions approx. 3600 x 1200 x 2720 mm The vertical perforated plate press is constructed of heavy-duty, torsion-free steel. Thanks to its simple, robust, and economical design, it has a long service life. The perforated plate is made of 10 mm sheet steel with a 50 mm hole pattern. The pressure cylinders and abutments are self-locking. 5 plug-in hand hydraulic cylinders on a perforated plate with a built-in pump, 2000 kp pressure relief valve, 140 mm pressure plate width, 80 mm pressure plate depth, 60 mm cylinder stroke 4 fixed individual abutments (Technical specifications according to the manufacturer - no guarantee!)

Condition: used, Cold hydraulic press (reconditioned pistons, non-functioning resistors), 100x50 plate Maximum opening with resistance plate (resistances not working): 350 mm Maximum opening with heating element removed: 500 mm Hjdewz Irqopfx Aabefn Nr. 3 Pistons diameter: 160 mm Approximate stem length: 600 mm

Condition: used, Number 1: Width x Depth x Thickness = 770 x 580 x 90 mm Hole = 131 mm and 200 x 300 mm and Number 2: Width x Depth x Thickness = 800 x 600 x 60 mm Hole = 150 mm and Number 3: Width x Depth x Thickness = 650 x 500 x 60 mm Hole = 120 mm and Number 4: Hfedpexckgksfx Aabjn Width x Depth x Thickness = 550 x 440 x 80 mm Hole = 195 x 150 mm and Number 5: Width x Depth x Thickness = 315 x 320 x 40 mm Hole = 95 mm

Condition: excellent (used), functionality: fully functional, Granite Plate - Dimensions 1400x250x160mm Hfsdpotnkdcefx Aabsn - Quality appx. Class 0 or better (will be checked) - frame on demand - with mounted pneumatic press

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: 6513/19, Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Hfsdpfx Aowu Sg Ejabon

Year of construction: 2025, condition: as good as new (ex-display), Vacuum - membrane press VP - Series are the optimal solution for woodworking. VP 3000 is equipped with the heating technology, which shortens the drying time of the glue, so that the efficiency is higher. Possible applications: Veneer / form gluing / wrapping... Hedpfx Aajdwh E Asbjfn Coating of different profiles (veneer,paper, plastic...) Wood bending: production of bent and layer-glued components The heating system is equipped with temperature control Rubber membrane 2,5 mm Table top is made of plastic 12 mm Oil-free Becker vacuum pump 25 m3/h The control system of the vacuum / tank capacity 15 l working area: 3000x1500mm Heating system temperature: Max. 60 degrees C heating system: KW 4,5 Pump capacity: KW 0,75 Vacuum pump flow rate: 25 m3/h Rubber membrane Dimensions outside: 3100 x 1650 x 1600 mm Weight: 450 kg Machine is equipped with a chassis. Location: From warehouse 54634 Bitburg - free on truck -

Year of construction: 2021, condition: new, Here are the technical data of the offered machine: If the press does not exactly meet your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Technical data + information: hydraulic 50 T heating press for laboratories It is a lower piston press with an open height of 400 mm ram travel 300 mm heating platen capacity up to 250 degrees heating plate size 200x200mm weight about 1500 kg height 1950 mm hydraulics built in the press body Hydraulic tank with 100 l monitored vertical door for the press chamber pressure, position - and speed adjustable via SIEMENS S 7 1200 SIEMENS touch screen monitor with 9 inch Safety technology from SICK (C-press, hydraulic press, hydraulic press, laboratory press, laboratory) Are you looking for a custom-fit machine? Contact us for an individual offer. Hodpsgrkigsfx Aabjfn Our hydraulic presses are manufactured according to German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore our presses exceed the Canadian and European safety requirements, because they correspond in all points to the national Brazilian safety guideline NR 12, which is based on these. Our great strength is the special machine construction and the press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: excellent (used), Year of construction: 2003, Perforated Plate Press Schafberger + Sprödhuber (S+S Maschinenbau) Type LPP - SPECIAL FORMAT Universal Gluing Stand / Frame Press Pressing area approx. L x W 3800 x 3000 mm Installation depth approx. 1300 mm Hfodpfx Astgq Iboabsn 6 hand hydraulic cylinders with integrated pressure relief valve, 60 mm stroke, max. pressing force 2,000 kg, pressure force finely adjustable with hand lever, cylinder can be swiveled 360° Including access ladder - on casters, pull-over NEW MAGNETIC LOCKS Ideal press for joinery shops that produce frames, solid wood panels, or windows in special shapes. Equipped with various pressing elements, see photos. Note: Used Machines: • Errors in technical specifications and subject to prior sale. • Prices quoted are for pickup from location - free shipping! Prices quoted are for pickup from location - free shipping! • The machines have been cleaned and functionally tested. • All machines are sold as is, without any warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only respond to inquiries if you provide your address and telephone number!)

Condition: used, Year of construction: 2003, machine/vehicle number: 92630105, Multi-shelf press ORMA Shelf dimensions: 2500x1300 mm Number of shelves: 4 pcs Oil heating via heat exchanger powered by steam Heat exchanger included Hfsdpfx Aswd Rxrsaben

Condition: used, Year of construction: 2002, machine/vehicle number: 98, Heizplatte / Heating Plate Busse HPT 900W Serial-No. 98 822 Heiztemperatur einstellbar / Heating temperature adjustable Arbeitsfläche / Working area max. 350 x 650mm 5 Trockenklammern / 5 Drying clamps Online-Video-Inspection by Skype-Video Hodoupy S Nopfx Aabofn We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 1998, condition: excellent (used), machine/vehicle number: 3463 / 18 (91.144.1301/021), Max. Format: B1 Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Hedefh Dp Rjpfx Aabsfn

Condition: used, Year of construction: 2004, functionality: fully functional, pressing force: 40 t, operating temperature: 250 °C, heating capacity: 24 kW (32.63 HP), stroke length: 200 mm, table width: 1,500 mm, table length: 1,300 mm, Technical data: Total pressure output 400 kN Total pressing area 1300 x 1500 mm Total pressing table 1300 x 1580 mm Spec. pressure at full design 2.1 daN/cm² (kp/cm²) 4 cylinders 60 mm diameter 200 mm stroke Operating pressure 350 bar Height of the pressing chamber 200 mm Loading width 1600 mm Steel heating plates Max. operating temperature: 250 °C Hfsdjvzwwqopfx Aabon Roller bars arranged to the right and left of the lower heating plate for moving the press package in and out. Roller bars can be raised and lowered pneumatically by the operator, can only be activated at the bottom dead center of the pressing table. Max. load 500 kg.

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: W202001, Equipment: documentation/manual, Hydraulic press for versatile use as an assembly press, small series press, manual insertion press or heating press in double column press design (H-press) The press can be inspected at the Ennepetal warehouse. It is a 2.5 year old, unused press without operating hours, which is sold with full warranty. List price: 45.000 € for a special price of 28.000 € Technical details: Robust machine frame Capacity: 30 tons - at 300 bar Pump ASC: 28.5 liters/min. Engine: 11 kW - 15 hp Oil tank: 600 × 450 × 500 mm - with approx. 100 liters Cylinder piston: Ø 110 mm Cylinder inside: Ø 70 mm Stroke: 500 mm Forward speed: 45 mm/s Return speed: 55 mm/s Guides: Ø 50 mm Table top: 800 × 550 mm - with T-slots Plunger plate: 700 × 500 mm - with T-slots Total weight: 2000 kg Valves from BoschRexroth Control cabinet technology from renowned manufacturers Table size of the press table 700 × 500 × 70 mm Table height 800 mm, from hall floor Cylinder dimensions / piston rod 110 / 75 mm Plunger size 700 × 500 × 80 mm Emergency switch Rear protective cladding made of painted mesh Lighting in the press area Closed at the rear and sides 500 mm high light curtain with 14 mm resolution (finger protection) Maximum distance between table top and ram 500 mm Cylinder travel 500 mm Front open width 820 mm Press pressure adjustable from 5 to 30 T via rotary control Travel speed downwards 50 mm, upwards 40 mm per second Total weight approx. 2000 kg Paintwork in RAL (light gray) 7035 and RAL 2009 (orange) Assembly, commissioning, instruction for a separate charge CE declaration and documentation in German Plunger plate with two guide columns Resettable piece counter Position limitation via cam switch Adjustable two-hand control with 3 m supply cable Hfedpfeu U Ey Iox Aabjn Safety test with certificate from an authorized company There are movable sensors on the right-hand side to limit the travel distance. These can be used to set a specific travel distance, for example 300 mm. The press then automatically moves up to the preset point at the touch of a button. The ram plate is guided by 2 guide columns. The rear of the press is closed, but equipped with air outlet openings. There is an ejection chute in the table. Light barrier with under-grip protection. Mountable overgrip protection. Optional: 2 heating plates, 500 × 500 mm heating surface, total size 550 × 550 mm, with controller, up to 200 degrees, incl. insulating plate, 20 mm thick, with timer Optional: Commissioning and training Delivery time Currently a delivery time of approx. 2 weeks is to be expected (without heating plates) Heating plate delivery time approx. 4 weeks. Customer service: From Dresden, Hamburg, Ennepetal, Waibstadt, Göppingen or Gelsenkirchen

Year of construction: 1996, condition: excellent (used), machine/vehicle number: 121, Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Hfedpoh Eib Eofx Aaben

Condition: good (used), pressing force: 95 t, cylinder diameter: 90 mm, plate width: 1,350 mm, Veneer Press Joos Type: HP 90 with 2 intermediate plates, stacking automaton, and lift table Pressing area: 2,550 x 1,350 mm Intermediate plates: 2 pcs. Pressing pressure: 95 t Piston diameter: 90 mm Specific pressing pressure: 2.75 kg/cm³ Hsdpsxnqq Hjfx Aabofn Number of cylinders: 4 Heating medium: hot water Total power: 1.3 kW Safety device: emergency stop rope Press dimensions: 3,000 x 1,530 x 2,200 mm Press weight: approx. 4 t Elkom heating plates in very good condition Scissor lift table The plates are stacked and thus unloaded automatically.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: CU 600.6, The expansion vessel is in very good condition. Sale only due to the refurbishment of our heating system! Hfedpswv T Nwefx Aabsn

Condition: used, 2 clamping plates, 1 pair of clamping bars with T-slots Hjdpfxsxf Uwlo Aabsfn Clamping block, press table, auxiliary table with T-slots Length of each clamping bar: 900 mm Width of each clamping bar: 295 mm Thickness of each clamping bar: 130 mm - 6x T-slots, 30 mm - T-slot spacing: 150 mm - 6 holes Ø 18 mm (spacing 300 x 160 mm) - All faces machined Net weight per clamping bar: 240 kg Good condition

Condition: used, SECOND-HAND MULTIPLATENS BENDING PRESS - 7 platens - platen diam. mm. 2300x1300 Hfjdpfx Aaswnnmzobjn - 6 cylinders diam. 180 mm.

Condition: used, SECOND-HAND MULTIPLATENS BENDING PRESS - 7 platens - Platen dim. mm. 800x800 - Opening mm. 1600/1800 Hedpfowry H Uex Aabjfn - Cylinder diam. 350 mm.

Condition: used, Year of construction: 2000, machine/vehicle number: 11/03, SECOND-HAND MULTIPLATENS PRESS VECCHIATO MOD. 600-600 4P – CE RULES - N. 4 platens - Platens dimensions mm. 600x600 Hodpfowrym Iex Aabefn - S/N 11/03 - Year 2000

Condition: used, SECOND-HAND MULTIPLATENS BENDING PRESS - 9 PLATENS - Platens dim. mm. 800x800 Hfsdpfx Aajwryw Tjbjn - Opening mm. 1600/1800 - Cylinder diam. 350 mm.