Used Pneumatic Lubricator for sale (10,216)

Condition: new, Year of construction: 2025, functionality: fully functional, Two new SKF piston pumps with reservoirs are for sale. Due to a change in the ongoing project, they cannot be used as originally planned. Manufacturer: SKF Type: PPU-35-2.5W Available quantity: 2 Condition: New, unused, as they are not suitable for our project Lubricants: Oils and greases up to NLGI class II Pre-pressure: max. 30 bar Pgodpozt Hqtjfx Afwsr Operating pressure: 4.5 - 10 bar Output pressure: max. 160 bar Adjustable flow rate: PPU-5: 0.1 - 0.5 cm³/stroke, ratio: 1:28 PPU-35: 0.7 - 3.5 cm³/stroke, ratio: 1:25 Compressed air connection (P1): M10x1 Lubrication line connection: for Ø 10mm Suction connection: M18x1.5 Lubricant reservoir: 2.5 kg or 5 kg Level switch for minimum grease level optional Price per unit: €3,350 net

Condition: used, 1 kW // 2,700 rpm Foot-operated Technical data: - Engine: 1 Pgodpjztvx Hefx Afwor

Condition: new, Technical data: Working width: 970 mm Grinding width: 950 mm Working height: 3 - 160 mm 1 steel aggregate 2 combination unit with shoe The shoe is pneumatically pressed Sanding belt dimensions: 970 x 2150 mm Pgsdpfx Afjg A D Anower Common motor power of 2 grinding aggregates: 11 kW The speed of the feeding belt on the converter: 16-18 m / sec. Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Sanding roll diameter: 150 mm Sanding pad width: 50 mm Sanding belt speed: 18 m / s 1 unit Compressed air consumption: 20l / min Standard equipment: Mechanical oscillation of the sanding belt without the use of compressed air. ECO GEAR SYSTEM Smooth regulation of the feeding belt on the converter 4-20m / min Automatic star / delta start Steel roller on the first aggregate, rubberized on KOMBI agragata Electronic table height display Automatic reading device for gr. material and table position setting Safety switches Automatic machine switches Main engine brake Rubber pressure rollers 2-roller table at the entrance and exit In stock! Machine dimensions: Length: 1630 mm Width: 1656 mm Height: 2025 mm

Condition: used, Year of construction: 2008, Zebra110pax4 label printer and pneumatic stamp. RA2315 Printer manufacturer: Zebra Printer type 110pax4 Control panel: LCD display with status display and buttons on printer, manual control panel on the side and control via PLC I/O Print type: Thermal transfer printing or direct thermal printing selectable Interfaces: Ethernet/control cable Print media: Standard media, tags and RFID media (reading and encoding of RFIF labels) Current label size: 90x36mm, applicator is designed for this size Label length min: 12.7mm Print media width: 16-114mm Ribbon width: 25.4-107mm Ribbon length max: 900m Roll size core diameter: 25.4mm Roll size maximum diameter: 101.6mm Pgedeux Sfzepfx Afwsr Resolution: 203 dots/inch (8 dots/mm) Dot size: 0.125mm x 0.125mm Print speed: 12 inches/second Base area: 700x700mm, with 100mm protruding control panel/compressed air maintenance unit Applicator height: 800mm lower edge Print speed: approx. 2 seconds/label with application Electrical circuit diagram enclosed Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstraße 11 B & C, 97076 Würzburg, Germany

Condition: as good as new (ex-display), Festo pneumatic cylinders RA1941 Manufacturer: Festo cylinders Some still Orginalverpackt alongside prices are per piece. 8 x ADVU-25-10-P-A 86,39€ 7 x ADVU-40-15-P-A 128,46€ Pedsk Abl Nopfx Afwsgr 8 x ADVU-40-20-A-P-A 131,49€ 4 x ADVU-25-20-A-P-A 89,60€ 8 x DNC-63-160-PPV-A 198,00€ 1 x DNC-50-125-PPV-A 165,03€ 7 x DNC-40-80-PPV-A 139,50€ 1 x DNC-40-200-PPV-A 149,01€ 2 x DNU-32-50-PPV-A price on request 3 x STA-50-30-P-A-SA Price on request 1 x FENG-40-200-KT+DNC-40-200-99A 624,99€ 1 x FENG-40-200-KT 474,99€ 4 x DMM-25-15-P-A 46,38€ 1 x DFM-32-50-PA-GF 228,55€ 8 x DNC-32-40-PPV-A 120,54€ 1 x DNC-32-50-PPV-A 121,15€ 10 x DNC-32-80-PPV-A 122.93€ 10 x DNC-40-50-PPV-A 137,13€ 3 x DNC-50-80-PPV-A 160,87€ 2 x DNC-50-50-PPV-A 157,85€ 5 x DSNU-25-25-PPV-A 43,28€ 4 x ESNU-25-20-P-SA Price on request 1 x DSNU-25-10-P-A 36,59€ 2 x DSNU-20-20-P 34,65€ 1 x ESNU-16-25-P Price on request 1 x DSNU-20-20-P-A 34,65€ 1 x DSNU-20-50-PPV-A 40,77€ 2 x DGPL-40-450-PPVA-KFB price on request 7 x DNC-40-500-PPV-A 172,76€ 7 x DSNU-32-80-PPV-A 52,08€ 4 x DSNU-32-60-PPV-A 57,12€ 6 x DZF-25-12-A-P-A 110,52€ 1 x DZF-32-A-?-A price on request 2 x DZF-32-125-P-A-SA 126,57€ 2 x DSNU-25-125-PPV-A 45,05€ 1 x DSNU-25-125-PPV-A+2 SENSORS 101,30€ 1 x DSNU-25-300-PPV-A 48,35€ 1 x DNC-63-160-PPV-A-KP 815,28€ 2 x DNC-63-160-PPV-A 198,01€

Condition: good (used), Central lubrication, oil circulation system, single-line pump, central lubrication unit, grease lubrication pump, piston pump, lubrication pump, central oil lubrication pump, oil single-line pump -Manufacturer: Vogel, Oil - Central lubrication pump, oil inlet pump -Type: unfortunately no exact designation -Item No.: 122 Container capacity: 2.7 l -Dimensions: 235/140/H310 mm -Weight: 5.4 kg Pgedpsztpq Asfx Afwjr

Condition: used, Heavy-duty pneumatic gluing press with perforated sheet metal for flexible positioning of the press cylinders. One cylinder without a pressure shoe. Pgjdpfszryy Esx Afwer Technical data: - Pressing area: approx. 2,800 x 1,000 mm - Width: 600 mm - Height: 1,800 mm - Press cylinders: 6

Condition: used, Second-hand SAD-30/100 pneumatic cylinders Psdpszrxpfefx Afwsgr

Condition: used, Pneumatic cylinder FESTO DNU-40-125-PPV-A 14137 Pgodpfx Ajzrxnbefwor

Condition: used, Technical data: - Piston diameter: 50 mm Pgedpfx Afjzrxm Dewor - Stroke: 100 mm

Condition: excellent (used), Year of manufacture: 2007 The set includes: 1. Pneumatic press Manufacturer: Schmidt Type: 24 Pressing force: 9 kN Two-hand control (two-hand release) 2. Strip guide for stamping / embossing Manufacturer: SAEP Type: HSG 3. Control system Manufacturer: Siemens Type: Simatic Panel 4. Additional equipment Magnifying lamp Pgjdpfxox Eiuxs Afwjr Worktable Ergonomic safety work chair

Condition: used, Table size: 660 x 450 mm Stroke length: 520 mm Pgodpjq U Rbfsfx Afwjr

Year of construction: 2019, condition: new, functionality: fully functional, VALBIA SR 100 S.05 rotary pneumatic actuator with spring return. Manufacturer: VALBIA Type: SR 100 S.05 Product code: 82SR1918 Year of manufacture: 2019 Max. operating pressure: 8 bar Operating temperature: -20°C to +85°C Mounting connection: ISO F07 / F10 ATEX certificate: II 2 G/D c T6 CE marking DN50 Industrial valve with pneumatic rotary actuator Podpjztpilefx Afwegr 400 EUR per unit. The picture shows two units.

Year of construction: 2011, condition: ready for operation (used), 2 complete precision press systems are offered. Press force: 220kN, stroke: 100/12mm, operating pressure: 3/6bar, tool holder X/Y: approx. 350mm/300mm, safety distance: 355mm, overrun time: 0.07s, control system SCHMIDT PressControl 500: control type: PRC 500, incl. operating panel with display and keypad, two-hand control according to EN 574 Type III B. Accessories: machine frame with integrated safety device BGR 500 inspection, machine weight: 800kg, inspection possible by arrangement. Pgodpfxey S A I Uj Afwor

Condition: used, Lubrication pump, oil pump for central lubrication, lubrication unit Central lubrication pump, oil pump for central lubrication, hydraulic pump, oil central lubrication pump Pgsdezpbq Hepfx Afwor Manufacturer: BEKA Schmiertechnik / Baier & Köppel, Pegnitz Type E-812 / ES0.5 Year of manufacture: approx. 1990 Flow rate: 0.4 l/min Operating pressure: 15 bar Tank capacity: approx. 3 liters Motor power: 0.09 kW Motor speed: 2730 rpm Current consumption: 0.4 A Power supply: 400 Volt, 50 Hz Dimensions L x W x H: 280 x 150 x 380 mm Weight: 8.5 kg Good condition 2 units available Price stated per unit

Condition: used, Hydraulic power unit, KOSMEK hydraulic unit Pneumatic pressure converter Type: PL 087 Operating pressure: 100 bar Flow rate: 1 liter/min Tank capacity: approx. 4.5 liters - pneumatic drive Pgsdpfxezpbqtj Afwor - hydraulic connection Space requirement L x W x H: 250 x 140 x 290 mm Weight: 16 kg in good condition

Condition: like new (used), Year of construction: 2021, Atlas Copco Skid-mounted lubrication/seal oil system for compressor train including base reservoir/tank with pumps, filters, coolers, and valve manifold Including run down tank and assorted spares & gaskets. Note: Sales are conditional upon the satisfactory completion within 24 hours of conditional sale of a Business Partner Due Diligence Check (BPDDC) and an End User Statement form (EUS) by the buyer, and, if the buyer is not the end user, for each end user. Pgsdpfx Aezmadmjfwor

Year of construction: 2011, condition: excellent (used), 2 pneumatic shelf presses for edging and veneering. Type PNP Working area: 1250x2500 mm Weight: 1940 kg Pgodpfxjy Avb Ao Afwer Presses are fully operational and in use. For any questions, please contact: Piotr Żołnierczyk - 606 666 023

Condition: used, Year of construction: 1998, machine/vehicle number: 9083432, functionality: fully functional, Pneumatic press 125 tons Pgsdpfxjyzhqyj Afwsr

Condition: used, Year of construction: 1999, machine/vehicle number: 9093548, functionality: fully functional, Pneumatic press 63 tons Pgsdpfx Afjyzhvpjwor

Condition: new, Year of construction: 2026, functionality: fully functional, Pneumatic Hold-Down for a Sliding Table Saw – Essential Equipment for Maximum Material Stability A pneumatic hold-down for a sliding table saw is an essential piece of equipment for facilities that require maximum stabilization of the material being cut. The two-section model with a length of 3,200 mm ensures secure and even pressure against the worktable, eliminating problems commonly associated with working without a hold-down – chipping, material waste, and inaccurate cuts. Key Advantages Pneumatic hold-down with two independent sections – each equipped with two cylinders, allowing flexible control of the pressure applied to different areas of the table. Extended 3,200 mm beam – provides full coverage of a typical sliding table saw table length and is ideal for processing large-format panels. Optimal working force at low pressure – effective operation from just 2.0 bar, resulting in lower energy consumption and simpler installation. Improved operator safety – securing the material reduces the risk of panel movement and uncontrolled shifting during cutting. Reduced material waste – stable positioning eliminates cutting errors and reduces the amount of waste. Higher edge quality – with no material vibration or movement, cuts are clean and free from burrs and fraying. Construction and Technology The hold-down beam is made of a durable steel profile, ensuring long service life and resistance to deformation. The pneumatic cylinders are arranged in two independent sections, providing even pressure along the entire length of the material being cut. The separation of the pressure zones makes it possible to adjust the clamping force to different panel sizes and thicknesses. The entire system is designed for quick installation on most sliding table saw worktables, making it easy to integrate into existing production lines without modifying the machine's structure. Precision and Work Efficiency Using a pneumatic hold-down on a sliding table saw directly improves cutting efficiency and dimensional repeatability. Even when cutting thin or laminated panels with finished surfaces, the operator can be confident that the material will remain securely in position. This has a direct impact on the quality and appearance of the finished component. Applications The two-section hold-down for sliding table saws is suitable for: furniture manufacturing facilities specializing in cutting laminated panels and MDF, production of structural components from wood and wood-based materials, Pgjdpfx Aovxtcqsfwsr precision applications where excellent cutting quality and defect-free edges are required, workstation automation, as a component supporting serial cutting processes. Standard Equipment 3,200 mm hold-down beam 4 pneumatic cylinders (2 per section) Set of connectors for connection to the pneumatic system Mounting brackets for installation on the worktable Optional Equipment Quick-release air connection module Additional safety valve Foot control system (pneumatic pedal) Integration with the saw's control panel Technical Specifications Parameter Specification Hold-down length 3,200 mm Maximum material height 100 mm Number of cylinders 4 Operating pressure 2.0 bar

Condition: used, pneumatische Ösenmaschine / pneumatic Eyeletting machine Falzoni F401.9.S21 Baujahr / Year 2000 - Serial-No. 3710 Sehr guter Zustand / very good condition Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Pgedpfxev Azt Ej Afwsr On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Pneumatische Buchpresse - pneumatic Book Press Kokkelink BP 40 1 Pressplatte  / 1 Press Palte Pressfläche / Press Size max. 400 x 400mm Presshöhe / Press high max. 350mm Presshöhe stufenlos regelbar / Press high steppless adjustable Gewicht / Weight 250kg Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Pgodpfx Afjx Rq Rujwsr

Year of construction: 2017, operating hours: 3 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 2051476364, From our demonstration tool inventory, tested and fully functional: Used Desoutter SDT035-T2200-R4Q pneumatic pistol screwdriver with ratchet clutch with trigger start Output: Hex 1/4" Pgedpfxov Imyus Afwjr Torque: 1.0 to 3.5 Nm / 8.9 - 31 in.lb Idle speed: 2200 min-1 Length: 212 mm Weight: 1.1 kg Other tools for industrial production and maintenance on request.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, RAZIOL belt lubrication system consisting of: RAZIOL pressure vessel Podpfxowcpp Ho Afwogr Control unit Compressed air unit