Used Blacksmith Forge for sale (182)

Condition: used, Year of construction: 1987, functionality: fully functional, overall weight: 5,000 kg, total width: 960 mm, total length: 1,860 mm, total height: 2,160 mm, Pneumatic Forging Hammer MA4132 – 160 kg Heavy-duty pneumatic forging hammer, believed to be model MA4132, manufactured in the USSR. The machine is complete with separate anvil/base and electric motor. Technical data: Falling parts weight: approx. 160 kg Main machine weight: approx. 3,700 kg Anvil/base weight: approx. 1,000 kg Electric motor weight: approx. 300 kg Total weight: approx. 5,000 kg Motor power: approx. 15 kW* Year of manufacture: believed to be 1987* Podpfx Aozxd E Soirsgu Serial/identification marking on the machine: “87 №149” Location: Estonia Solid, heavy industrial forging hammer suitable for blacksmithing and forging work. The machine is sold as shown in the photos. Loading can be arranged by agreement. Inspection is possible by appointment. More photos and video available on request. *Some technical specifications and year of manufacture are based on identification of the machine as MA4132 and should be considered approximate.

Condition: used, Year of construction: 1951, Ram weight: 100kg. Including anvil block, anvil, standard dies and motor. Total weight: approx. 3400kg including anvil block. The machine was purchased in working condition in 2019 and has not been operated since. The hammer has very good compression and is in good condition. Low operating hours, no continuous operation. The sliding surfaces of the ram are greased. Documentation available. An on-site inspection is possible. Pgjdjz R A Iuspfx Airju

Condition: used, Year of construction: 1983, nominal force 2500 t stroke 600 mm cycle time 13 - 18 s distance between columns 1720 mm Distance table/ram, max. stroke up, adjustment up 2600 mm table surface area 1720 x 1800 mm allowed max. force 4000 t blow die to die 5000 t ram surface 2100 x 1320 mm capacity of ejector in table 40 t ejector stroke in table 250 mm ejector surface area in table 900 x 820 mm capacity of ejector in ram 6 t ejector stroke in ram 40 mm spindle diameter 425 mm power requirement 900,0 kW weight 335,0 t Pedpfx Aijzrpulerjgu Dimensions (WxDxH) 3,4 x 4,6 x 9,7 m height over floor 8,3 m fully automated forging line / spindle press with automation for the production of flanged shafts for hot forming only with reversible AC motor, pneumatic brake, plate ejector in table (40 t / 250 mm), ejector in ram (6 t / 40 mm), lifting device for repositioning, marking, tool change, insertion device, tilting device, loading and unloading arm, rotary table, circular oil lubrication, centralised grease lubrication cycle time approx. 13 - 18 s as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1961, Impact energy: 2040 Stroke: 660 mm Strokes per minute: 100/min Throat depth: 750 mm Distance between lower anvil and ram guide edge: 660 mm Drive power: 75.0 kW Weight: 32 t Hammer weight: 16.5 t Anvil weight: 15.5 t Pjdpfx Ajzypd Njirogu Ram weight: 750 kg

Condition: refurbished (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 1276, CNC Hot Radial Forging GFM SX-13 New in 1974 / 2022 New control system PLC SIEMENS S7 Machine number: 1276 No. of Hammers: 4 Forging force each hummer: 160 Ton Hammer stroke / min: 700/min Hammer lenght: 240 mm Diameter setting range: 80 mm Maximum forging diameter: Structural steel, round-cross section: Ø 130 mm square cross section: Ø 115 mm Smallest dimensions forged: Ø 25 mm Manipulator A max. displacement: 6820 mm Manipulator B max. displacement: 7150 mm Pgodpfoq U R T Nsx Aireu Maximum workpiece length: 6000 mm Rapid speed manipulator: 400mm/sec Total connected power: 300 kW 380 V, 50 Hz Machine dimensions: Forging height over floor: 615 mm Total height pf the machinr over floor: 1665 mm Total machine lenght: 32670 mm Total foundation lenght: 33400 mm Tot. machine width (without auxliary equipments): approx 3885 mm Total foundation width: 16000 mm Total weight of the machine: 84.000 Kg

Year of construction: 1974, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 1293, CNC Radial Forging Machine GFM mod. SX-16 Manufacture: GFM (Austria) YOM: 1974 / 2022 Model: SXL-16 Machine number: 1293 PLC: Siemens S7 - Technology V4.2 with CNC Bosch Rexroth XM Numbers of Hammers: 4 Forging force: 800 Ton (200 t per Hammer) Strokes per minute: 580 Hammer length: 320 mm Maximum hammer setting scope - calculated by diameter: 100 mm Maximum diameter of forging regarding: - structural steel: circular cross section – Ø 160 mm square cross section – 130 mm - high alloy steel: circular cross section – Ø 120 mm square cross section – 100 mm Extreme quadrangle: 12 x 120 mm Maximum length of forging: 6000 mm Min and Max diameter of mounting in manipulator: 30 - 160 mm Feed of manipulator A: 6800 mm Feed of manipulator B: 7200 mm Passage through manipulator: Ø 130 mm Manipulators speed in fast move: 400 mm/s Feed speed of manipulators (stepless adjustment): 10 ÷ 115 mm/s Cooling water pressure: 3 ÷ 5 bar Temperature of inlet water: max. 30˚C Cooling water consumption: 34m3/h Pipe diameter for cooling water: 2” Compressed air pressure: min. 5 bar Pipe diameter for compressed air: Ø20 mm Pgjdpfjq U Sa Ssx Airsu Consumption of compressed air: 1,5 Nm3/h Power supply (nominal power): 350 kW Motor voltage: 500 V Control voltage 220 V Power of main engine: 200 kW Power of pump motors: 185 kW Power of manipulators motors: 2 x 22 kW Dimensions of the machine Axis height of forging above the hall level: 750 mm Maximum height of machine above the hall level: 2.050 mm Maximum length of machine on the hall level: 33.740 mm Foundation length: 34.200 mm Maximum width of machine on hall level without loading equipment: 4350mm Foundation width: 15.600mm Machine net weight: 124.490 kg

Condition: used, Year of construction: 2009, machine/vehicle number: 3346, functionality: fully functional, pressing force: 1,700 t, Vaccari PV 410 Screw Press (2009) 1700 Ton Capacity Press Includes Electrotherm vacuum furnace for Heating Part 2x Robots for loading/unloading parts and components from furnace to press and then post stamp removal Podpfsz Tzxwex Airegu

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, SCHMID T 400 – Toggle cold forming press SCHMID T 400 Toggle cold forming press Manufacturer: SCHMID Type: T 400 Machine type: Toggle press / Cold forming press Year of manufacture: 1997, overhauled in 2004 Pressing force: 4000 kN Machine weight: approx. 17,000 kg Condition: Fully functional Accessories: Standard accessories Location: Korschenbroich, Germany Pgodpfs Aarm Rex Airsu Application area: Cold forming, toggle presses, embossing and forming of metal parts.

Condition: like new (used), functionality: fully functional, Brand New C50–160 Automatic Roll Forming Machine | Solar Mounting Structures | Ready Stock China PRICE & AVAILABILITY * Price per Machine: USD 79,900 – FOB China * Price for Both Machines: USD 155,000 – FOB China * Condition: Brand New / Unused * Quantity: 2 Complete Production Lines * Location: China Pgodpez Ny Icofx Airsu * Availability: Ready Stock – Immediate Availability PRODUCT DESCRIPTION: Two brand-new, fully automatic C50–160 Roll Forming Production Lines, designed for manufacturing solar mounting structures and industrial C-channel steel profiles. Both machines are fully manufactured and available from stock in China, eliminating standard manufacturing lead times. Each production line features computer-controlled automatic profile size adjustment, integrated hydraulic punching, servo-follow hydraulic cutting, and PLC touchscreen control. The machines are suitable for solar mounting structure manufacturers, steel profile producers, and industrial fabrication companies. TECHNICAL SPECIFICATIONS * Model: C50–160 Automatic Roll Forming Line * Material Thickness: 2–4 mm * Profile Range: C50–160 mm * Material: Q235–Q345 Steel / Al-Mg-Zn Coated Steel * Forming Speed: 20–25 m/min * Forming Stations: 16 * Main Motor Power: 22 kW * Uncoiler Capacity: 5 Tons * Profile Size Adjustment: Computer-Controlled Automatic * Punching System: Hydraulic – Oblong & Bottom Holes * Cutting System: Servo-Follow Hydraulic Cutting * Control System: PLC Touchscreen * Power Supply: 380V / 50Hz / 3 Phase * Approximate Machine Weight: 15 Tons per Line COMPLETE PRODUCTION LINE INCLUDES * 5-Ton Uncoiler * Leveling and Feeding System * Hydraulic Punching Unit with Molds * Automatic Roll Forming Main Machine * Servo-Follow Hydraulic Cutting System * Receiving Tables * PLC Electrical Control Cabinet * Cooling Circulation System * Spare Parts as Specified KEY SELLING POINTS * Brand-new, unused production equipment * Ready stock in China * Immediate availability without manufacturing waiting time * Computer-controlled automatic profile size adjustment * Integrated hydraulic punching and servo-follow cutting * Suitable for solar mounting structure production * Competitive FOB China pricing * Available individually or together Technical documentation, and inspection arrangements are available upon request. Contact us for any further technical details.

Condition: excellent (used), functionality: fully functional, overall weight: 1,00,000 kg, workpiece weight (max.): 18 kg, Hot forging hammer HUTA ZIGMUNT type MPM 3000 Energy of blow: 10 000 kgm Pgjdpfxjzzrtvj Airju Ram weight: 3 580 kg. Max. ram stroke: 1 000 mm Number of strokes per minute: 90 Total weight: 100 ton Anvil weight: 70 ton

Condition: used, Year of construction: 2010, functionality: fully functional, overall weight: 2,80,000 kg, Vaccari PVE 560 Screw Press (2010) 31,500kN force Pgedpfxoz Tzwge Airou All additional information available on AllSurplus.com

Condition: excellent (used), Year of construction: 1978, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 24, overall weight: 1,40,000 kg, Hot forging hammer 5 ton Kramatorsk type M2147 Nominal weight of dropping parts: 5000 kg Actual mass of dropping parts without upper die: 5080 kg Energy of blow: 12 500 kgm /125 kJ/ Max. number of strokes per minute: 50 Ram stroke: 1300 mm Min. distance ram – die holder: 400 mm Distance between columns: 800 mm Die length: 950 mm Die holder length: 1180 mm Dimensions /L x B x H/: 3000 x 2000 x 6470 mm Bottom anvil weight: 23 t Upper anvil weight: 77 t Total weight 140 t Psdpfx Aslnlq Doirsgu

Condition: refurbished (used), Automatic line for forging / hot stamping Installed after refurbishing in 2015 and having run for not more than 1,000 hours, condition is excellent. ➢ ADIGE CM 500 AUTOMATIC SAW ➢ 50 KW INDUCTION OVEN ➢ ELECTRONIC AUTOMATION SYSTEM ➢ VACCARI SCREW PRESS 180 screw diameter ➢ 10-POINT AUTOMATIC LUBRICATION SYSTEM ➢ BALCONI 50T TRIMMING PRESS ADIGE CM 500 AUTOMATIC SAWING MACHINE WITH 3.5-METER AUTOMATIC BAR LOADER Technical specifications: -Min./max. cutting capacity: 8 mm / 60 mm diameter -Standard cutting speed: ADIGE SALA. -Head motor power: (50 Hz) 2.2 kW -End-of-bar scrap equal to or shorter than the usable piece -Central hydraulic tank capacity: 200 liters -Cutting emulsion tank capacity: 50 liters -Weight: approx. 1,200 kg -Siemens electrical components 50 kW INDUCTION OVEN WITH 1 INDUCTOR (8–20 mm) with ELECTRONIC LOADING ARM For horizontal and vertical loading of work pieces Features a brushless motor, programmable axes, and press interpolation with electric axes; electronic components: Siemens Load capacity: 4 kg; vertical stroke: 80 mm; power supply: Electro-pneumatic VACCARI SCREW PRESS 180 screw diameter Technical specifications: -Screw diameter: 180 mm -Theoretical pressure: 300 tons -Table dimensions: 430 x 550 mm -Slide dimensions: 500 x 650 mm -Ram stroke: 350 mm -Distance between uprights below the guides: 450 mm -Distance between uprights within the guides: 350 mm -Max. height between table and ram: 650 mm -Strokes per minute: 35 -Table height under the guides: 300 mm -Main motor: hp 30 -Machine dimensions: 4100 x 2600 x 2200 mm -Approximate weight: 11,000 kg NEW SIEMENS S7 ELECTRICAL SYSTEM NEW PNEUMATIC SYSTEM Pgsdpfx Aozcdlujirsu NEW LUBRICATION SYSTEM BALCONI 50T TRIMMING PRESS Technical specifications: -Power: 50 tons -Table dimensions: 800 x 500 mm -Ram dimensions: 440 x 380 mm -Max. die height: 400 mm -Adjustable stroke: 100 mm -Strokes per minute: 35–100 -Main motor power: 5.5 kW

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, pressing force: 4 t, stroke length: 1,200 mm, oil tank capacity: 700 l, total height: 7,480 mm, overall weight: 78,500 kg, year of last overhaul: 2023, Equipment: documentation/manual, Oil-hydraulic forging hammer Lasco type KH 400 YOM 1980 Fully retrofitted and modernized 2023. Work impact: 4,000 mkg Fall height in normal dies: 1,200 mm Ram weight: 3,350 kg Length between the guiding light: 725 mm Ram: 620 mm Motor power: 60 kW Weight of the anvil: 44,000 kg Pgodpfszh Nchsx Airou Total weight of the hammer: 78,500 kg Total height of the hammer: 7,480 mm Building height above floor level: 6,260 mm Oil tank capacity: 700 liters Piston rod Length: 500*2800 mm Rubber cushions: 90/2900*120 mm Operating voltage: 380 Volts Control voltage: 220 Volts Slowly ON: 0.62 m/min.

Condition: good (used), Year of construction: 2005, machine/vehicle number: 12345, functionality: fully functional, Used hydraulic forging hammer Manufacturer: LASCO Type: HOU 250 SO Year of manufacture: 2005 Impact energy 40 kJ, ram stroke 710 mm, ram weight 3,000 kg, machine foundation with spring damping elements, conveying system by STAHLMANN, two-module design, work platform, automatic feeding, infeed and outfeed, water cooling. Pgodpozidv Sjfx Airsu

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 100.06238, functionality: fully functional, hydraulic forging hammer (H2) Manufacturer: LASCO Type: HO - U 630 SO Year of manufacture: 2008 Impact energy: 63 kJ Impact frequency: approx. 85/min Ram speed: up to 5 m/s Ram stroke: 520 to 760 mm Ram depth: 750 mm Pjdpfx Aeziw Nljiregu Ram weight: 4,300 kg Central lubrication with hydraulic oil Filter circuit with cooling

Condition: ready for operation (used), Year of construction: 1976, functionality: fully functional, hydraulic forging hammer (H5) Manufacturer: BECHE Type: KGH 31.5 Year of manufacture: 1976 Energy: 31.5 kJ Machine foundation with spring damping elements Psdoziw N Eopfx Airsgu Forging furnace Gas-heated Power: 400 kW New Siemens S7 control system, refurbished

Condition: used, Year of construction: 1980, pressure . t total power requirement . kW weight of the machine ca. . t dimensions of the machine ca. . m An entire forging plant in Germany is for sale. Includes: Banning forging hammers (10–50 hundredweight); Dango and Dienenthal HSM 12 manipulators; Merz bogie-hearth furnace, hood-type furnace, etc.; wedge- ram spare parts, etc.; mechanical workshop; oil storage facility. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Pgjdpfxezfwt Aj Airou If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 1991, A BÊCHÉ hydraulic short-stroke die forging hammer is offered for hot forming and die forging of workpieces. Working capacity: 16kJ, continuous blow frequency at full load: approx. 32/min-38/min, max. blow frequency: 122/min, final ram velocity: 5.1m/s, main drive pump flow rate: 187.5l/min, circulation pump flow rate: 120l/min, oil capacity in the drive head: 550l, clear width between the guides: 520mm, working height to upper edge of insert: 750mm, ram depth: 470mm, insertion depth: 550mm, die height min./max.: 120mm/320mm. Total weight: approx. 23.2t, anvil bed, overall dimensions X/Y/Z: approx. 1485mm/825mm/4552mm, max. space requirement/foundation dimensions X/Y: approx. 3350mm/3300mm. An on-site inspection is possible. Pedpfx Aijzrhhwerogu

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 100.981.48, functionality: fully functional, hydraulic forging hammer (H1) Manufacturer: LASCO Type: HO - U 400 SO Year of manufacture: 1999 Impact energy: 40 kJ Ram stroke: 710 mm Ram weight: 3,000 kg Pgjdjziw Nxspfx Airju Machine foundation with spring damping elements, forging furnace, gas-heated, power output: 800 kW, underfire zone, pre- and main chamber burner, work platform

Condition: ready for operation (used), Forging hammers, C type, capacity 80 kg, 400 kg and 750 kg. Ram weight: 80, 400 and 750 kg. Blow energy: 150, 1000 and 2000 KJ. Stroke: 385, 670 and 835 mm. Strokes/min: 210, 130 and 105. Weights: 3,500 kg / 13,500 kg / 25,000 kg. Pgjdpfxex Ahbfe Aireu

Condition: used, Year of construction: 1970, pressure . t stroke . mm impact capacity 60-70 mkp Pgodsud Tp Nspfx Aireu total power requirement . kW weight of the machine ca. 3 t dimensions of the machine ca. . m

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, pressing force: 4,000 t, 5. Forging hammer SMERAL type KJH 4 Weight of the ram, kg: 1’800 Ram impact rated energy, kgm: 4’000 Number of ram strokes,1/min: 48 Ram stroke, mm: 500 Die camping area, mm: 286 x 600 Min. Die Height, mm: 350 Output of main motor, kW: 45 Lenght of the machine, mm: 3’100 Widht of the machine, mm: 1’900 Height of the machine, mm: 3’900 Weight of the machine, kg: 27’000 Podpfx Aiowbginsrjgu

Condition: used, Year of construction: 1969, ram hammer weight 480 kg stroke 710 mm throat 550 mm impact capacity 1250 kpm no. of strokes 210 Hub/min ram hammer stroke 710 mm work height max. 720 mm total power requirement . kW weight of the machine ca. 7,4 t pressure 400 kg Steam drive Pgjdpfx Aeyqur Ioirsu No. 3065 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: like new (used), The Hammer is simmilar with Huta Zygmunt MPM 3150B. -maximum energy of impact at maximum stroke - 3600kgm; -ram weight - 1250kg; -mode of operation – pneumatic; -table size (front to back) - 700mm; -stroke - 800mm; -number of blows per minute – 110; Podpfx Aiefbnhwsregu -working pressure - 5 - 7bar; -max. weight of upper die - 400kg; -die height - 220mm; -ram (front to back) - 500mm; -air consumption - 15m3 / min; -anvil weight - 24 t; -height of machine above floor - 3750mm; -total machine's height - 4380mm; -total weight - 35t;