Used Pneumatic Valve for sale (12,444)

Condition: excellent (used), Solenoid valve, disc valve, flap valve, electromagnetic valve, solenoid valve, solenoid gas valve, gas solenoid valve -Manufacturer: Bürkert, solenoid valve unused -Type: 0313 D 2.0 FKM MS -ID No.: Voltage: 82-148 V -Quantity: 97x valve available Nsdpfxjtuycre Alhswh -Price: per piece -Dimensions: 68/32/H51 mm -Weight: 0.2 kg/piece

Condition: like new (used), 0.4–10 bar / Max INLET 14 bar Nwodpfx Asy U E Upjlhoh Application: Machinery/equipment from Glaston, etc. Width: 54 mm Height: 54 mm Depth: 133 mm Weight: 597 g Condition: like new

Condition: refurbished (used), Refurbished and pressure tested. Lot of 45 flanged safety relief valves, spring loaded. Pressure ratings between 0.5 - 9 Bar. Nwsdpfxsv Dw R Ne Alhsh

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Stroke travel: 320 mm -Piston diameter: 40 mm -Piston rod: 16 mm -Number: 4 pneumatic cylinders available -Price: per piece Nwedpfx Alsfa Sc Rshsh -Dimensions: 484/53/H53 mm -Weight: 1.8 kg/piece

Condition: good (used), functionality: fully functional, SL 100 Door Lock Milling Machine - with milling motors for faceplate and handle - with pneumatic clamps - 1.7 kW Nsdpeygm Awefx Alhjwh Transport available at extra cost! Due to the age of this used machine, warranty is excluded for commercial customers.

Condition: good (used), Year of construction: 1997, functionality: fully functional, - PVC Primus, 3 mm PVC cartridge system - Edgebanding, flush sawing, flush milling, chamfer milling, radius milling - Scraper, buffing unit - Dimensions: 4700 x 1400 x 1650 mm - Weight: 1300 kg - Working dimensions: Length: 4500 mm Depth: 1020 mm Height: 1630 mm - Connection port: 140 mm Ø - Workpiece width: min. 60 mm Nwedpfowv Uq Aox Alhsh - Feed speed: 11 m/min - 6 bar - 400 Volt compressed air - Edge thickness: 8 mm for strip material, 2 mm for coil material - WITHOUT pre-milling unit - Pneumatic cylinder new Shipping possible at additional cost! Due to the age of the used machine, warranty is excluded for sales to commercial customers.

Condition: good (used), functionality: fully functional, Three proportional valves from Bosch 0811 300 053 0811 402 012 0811 402 006 Price per unit: 250 EUR Nodpfxjy Sh Hco Alhjwh If you buy all three: 650 EUR

Year of construction: 2011, condition: ready for operation (used), 2 complete precision press systems are offered. Press force: 220kN, stroke: 100/12mm, operating pressure: 3/6bar, tool holder X/Y: approx. 350mm/300mm, safety distance: 355mm, overrun time: 0.07s, control system SCHMIDT PressControl 500: control type: PRC 500, incl. operating panel with display and keypad, two-hand control according to EN 574 Type III B. Accessories: machine frame with integrated safety device BGR 500 inspection, machine weight: 800kg, inspection possible by arrangement. Nwodpfx Aljy S A I Ujhoh

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, C-frame press for clinching technology Pressing force: 4.8 t Air pressure: 6 bar Total stroke: 32 mm Nwedpey Ey Hzofx Alhjh Power stroke: 3 mm No tools included

Condition: good (used), tem: D-7856-Samson-steam Valves Diverse steam valves made by Samson complete with control box! For more informations please contact us! Njdpfx Aleirfb Eehjwh DN 20/DN40/DN50/DN65/

Condition: new, functionality: fully functional, Year of construction: 2020, machine/vehicle number: KST-02N-DC24V, Bulk lot of electric valve actuators – Kangsaite Automation KST-02N. • Quantity available: 50+ units • Type: Electric quarter-turn valve actuator (on/off) • Voltage: 24V DC • Rated torque: 20 Nm • Protection: IP67 • Mounting standard: ISO5211 F03 / F04 / F05 • Rotation: 90° • Application: Ball valves / butterfly valves • Condition: New old stock (unused, never installed) Suitable for industrial automation, food & beverage, water systems, HVAC, and process control. Sold as actuators only (no valves included). Location: Rehovot, Israel EXW Bulk pricing available. Discounts for larger quantities (10+, 25+, 50+ units). Nwsdjx N A Nyjpfx Alhoh

Year of construction: 2024, condition: new, functionality: fully functional, Pneumatically operated can opener including rack for different sizes Nwodpfx Aottvxwslhoh Technical description: The can is handled by placing it under the punching head. By manually actuating the safety two-hand control, the lid is punched out with the knife in the punching head. After releasing the two-hand control, the punching head moves upwards to the home position.

Condition: good (used), Year of construction: 2007, I sell the automatic pneumatic end cutting saw OMGA T521, year 2007. Input table automatic feeding 5,10m (pusher system) Nsdpfx Alsvxu Rpehowh Outut table 1,50m Total length: 8,00m Optimising with automatic cutting sequence modes. Available immediately. CE version. Documentation included.

Condition: good (used), Year of construction: 2012, I sell the automatic pneumatic end cutting saw KuangYung PX60 CFS 200B, year 2012. Motor power 7,5kW Input table automatic feeding 5,10m (throughfeed system) Outut table 9,20m 5 pcs. kickers on left outfeed table Nwsdpfx Asppwx Eelheh Total length: 15,50m Optimising with mistakes deffect reading and automatic cutting sequence modes. Available immediately. CE version. Documentation included.

Condition: excellent (used), Refrigeration compressor, refrigeration unit, cooling compressor, refrigeration unit, cooling compressor, compressor, filter dryer housing, shut-off valve, ball valve, solenoid valve body -Manufacturer: Danfoss, solenoid valve for refrigeration technology, unused, original packaging -Type: EVR 20/032F1245 -Connection: 22 mm -Number: 2 solenoid valves available -Price: per piece -Package dimensions: 275/120/H90 mm Nwodpfsfx At Djx Alhjh -Weight: 1.2 kg/piece

Condition: good (used), Probat HDF 100 rotary valve overall dimensions: 140 cm long, 45 cm wide, 55 cm high. Inlet opening: 46 cm x 9.5 cm. Weight: 270 kg. Nsdpowgl A Dsfx Alhswh

Year of construction: 2015, condition: used, functionality: fully functional, The pneumatic butt welding device, type Sv‑63P, is equipped with a robust vertical frame that includes vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable carriages. These carriages are connected to a horizontal cylinder for compressing the workpiece. The carriage movement is limited in both directions—both for compressing and opening—while the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping with the set jaw distance is controlled using foot switches. An additional control cabinet with switches and push-buttons allows for single or simultaneous clamping and supports both manual and automatic welding operations. After welding, the clamping jaws lift, and the carriages return to their initial positions. The welding parameters are set using a controller mounted on the side of the device. The welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws via laminated conductors. Inside the device, a power board with a thyristor and a main control board ensure smooth operation. On the device cover, a compressed air maintenance unit with a pressure regulator is installed to adjust the clamping force. The main switch to activate the unit is located on the controller for setting the welding parameters. Nwodpfxeyqr Sxj Alhsh

Condition: like new (used), 12 units available All are new and unused Price is per unit Nwsdpjylkyksfx Alhsh

Condition: used, functionality: fully functional, Year of construction: 2006, Drive via 0.37 kW geared motor Getriebebau-Nord Speed: 1,390 / 13 rpm Nwodpfx Aow U Tmfslheh

Condition: used, Vacuum pneumatic conveying system Includes valve, pneumatic vibrators Excluding filter bags Diameter +/- 550mm Suction line diameter 63mm Nwjdpfsy Ti D Sex Alheh See our other listings.

Condition: new, functionality: fully functional, fuel type: diesel, fuel: diesel, brakes: retarder, color: dark red, gearing type: automatic, Equipment: ABS, Bluetooth, airbag, onboard computer, SCANIA 770 S V8 FULL PNEUMATIC *AVAILABLE FOR IMMEDIATE DELIVERY – TO BE REGISTERED 1-YEAR MANUFACTURER WARRANTY (EPC) -Kilometers: 0 (New) -Leather/Alcantara interior -All-pneumatic suspension Nsdpfx Asy Ny Tcslhjwh -Retarder -Stationary air conditioning -LED headlights -Satellite navigation system -Digital dashboard -Refrigerator -Alloy wheels OPTION FOR FINANCING OR CUSTOMIZED LEASING AVAILABLE ON SITE. FROM 24 UP TO 96 INSTALLMENTS, EVEN WITH ZERO DOWN PAYMENT. OUR LOCATIONS: SALERNO | Pezzagrande Area, P.I.P. Industrial Zone – 84025 Eboli (SA) Tel. 0828 436141 – Mob. 335 671 3062 NAPLES | Via del Cassano, 457 – 80144 Naples (NA) Tel. 081 0152901 – Mob. 335 671 3062 CASERTA | S.S. 87 Sannitica KM 19.900, 81025 Marcianise (CE) Tel. 0823 1686306 – Mob. 335 671 3062 PIACENZA | Via Piemonte, 11, 29122 Piacenza (PC) Tel. 0823 1686306 – Mob. 328 217 7326 BUSINESS HOURS: MONDAY-FRIDAY 8:30 am - 6:30 pm | SATURDAY 8:30 am - 1:30 pm WE OFFER A WIDE RANGE OF USED COMMERCIAL AND INDUSTRIAL VEHICLES OF MULTIPLE BRANDS: Fiat – Hyundai – Daf – Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania – S-Way – S500 – V8 – 650 – 580 – 730 – S500 – Stralis – Man – Nissan V8 – Intarder – 770S – Limited Edition – 660S – Semi-trailer – Fridge trailer – Tanker – Lamberet – Schmitz – Isuzu – Flatbed – Crane – Tipper – Four-axle – Rear four-axle – Tway – T-Way – 540 – 460 HP – Xway – X-Way – Three-way tipper – V8 – Scania – Frost Edition – Curtain-sided – Box body – Tail lift – Refrigerated cell – Insulated with fridge – Van Domenico Truck srl declines any responsibility for possible discrepancies in technical equipment, options or features which, in some cases, may differ from those described. We invite you to verify the features of the specific vehicle.

Condition: new, functionality: fully functional, fuel type: diesel, fuel: diesel, brakes: retarder, color: grey, gearing type: automatic, Equipment: ABS, Bluetooth, airbag, onboard computer, SCANIA 770 S V8 FULL PNEUMATIC *AVAILABLE FOR IMMEDIATE DELIVERY – TO BE REGISTERED 1-YEAR MANUFACTURER WARRANTY (EPC) -Kilometers: 0 (New) -Leather/Alcantara interior -All-pneumatic suspension -Retarder -Stationary air conditioning -LED headlights -Satellite navigation system -Digital dashboard -Refrigerator -Alloy wheels Nwedpfxsy Ny Rzj Alhjh OPTION FOR FINANCING OR CUSTOMIZED LEASING AVAILABLE ON SITE. FROM 24 UP TO 96 INSTALLMENTS, EVEN WITH ZERO DOWN PAYMENT. OUR LOCATIONS: SALERNO | Pezzagrande Area, P.I.P. Industrial Zone – 84025 Eboli (SA) Tel. 0828 436141 – Mob. 335 671 3062 NAPLES | Via del Cassano, 457 – 80144 Naples (NA) Tel. 081 0152901 – Mob. 335 671 3062 CASERTA | S.S. 87 Sannitica KM 19.900, 81025 Marcianise (CE) Tel. 0823 1686306 – Mob. 335 671 3062 PIACENZA | Via Piemonte, 11, 29122 Piacenza (PC) Tel. 0823 1686306 – Mob. 328 217 7326 BUSINESS HOURS: MONDAY-FRIDAY 8:30 am - 6:30 pm | SATURDAY 8:30 am - 1:30 pm WE OFFER A WIDE RANGE OF USED COMMERCIAL AND INDUSTRIAL VEHICLES OF MULTIPLE BRANDS: Fiat – Hyundai – Daf – Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania – S-Way – S500 – V8 – 650 – 580 – 730 – S500 – Stralis – Man – Nissan V8 – Intarder – 770S – Limited Edition – 660S – Semi-trailer – Fridge trailer – Tanker – Lamberet – Schmitz – Isuzu – Flatbed – Crane – Tipper – Four-axle – Rear four-axle – Tway – T-Way – 540 – 460 HP – Xway – X-Way – Three-way tipper – V8 – Scania – Frost Edition – Curtain-sided – Box body – Tail lift – Refrigerated cell – Insulated with fridge – Van Domenico Truck srl declines any responsibility for possible discrepancies in technical equipment, options or features which, in some cases, may differ from those described. We invite you to verify the features of the specific vehicle.

Condition: used, functionality: unexamined, 2 manual butterfly valves Connection: DN40 Stainless steel, stationary floor-mounted Nwodoy Srhqspfx Alhjh For product/pipe switching

Condition: good (used), 5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve -Manufacturer: GSL German Standard Lift, directional control valve -Type: 4070150000 EL -Pmax: bar -Number: 3x valve available -Price: per piece -Dimensions: 236/46/H70 mm Nwsdpfx Aey Atv Relhjh -Weight: 2.2 kg/pc.

Condition: good (used), 5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve -Manufacturer: GSL German Standard Lift, directional control valve -Type: 4070030000 BK -Pmax: bar Nwodpfx Aloy Atu Hehsh -Number: 2x valve available -Price: per piece -Dimensions: 236/46/H70 mm -Weight: 2.2 kg/pc.