Used Ball Screws Maho for sale (429)

Condition: ready for operation (used), MAHO 40 x 5mm ball screw spindle for MAHO MH 800 C machine - total length: 855mm, used, in good condition, 100% functional, scope of delivery as shown in the photos. Djdpjz Syz Iofx Aidowd

Condition: used, Year of construction: 1994, A Maho 4-axis CNC machining center is offered for sale. X/Y/Z travel: 600mm/500mm/400mm, tool holder: ISO 40, max. spindle speed: 6000rpm, feed rate: 6m/min, rapid traverse: 13m/min, operating hours/power-on hours: approx. 58569h, control: Philips CNC 432. Equipped with through-spindle coolant supply with high-pressure pump, fully enclosed splash guard, automatic tool changer, 2-pallet changer and chip conveyor. The main spindle is defective and has already been removed from the machine. The machine is not operational. Documentation available. An on-site inspection is possible. Dwedpfxoz Hn S Ae Aided

Condition: excellent (used), Year of construction: 2004, operating hours: 19,000 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, feed rate X-axis: 20,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, controller model: CNC Heidenheim ITNC 530, rotational speed (min.): 20 rpm, rotational speed (max.): 18,000 rpm, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 18,000 h, number of slots in tool magazine: 94, Equipment: chip conveyor, documentation/manual, Technical specifications Travel ranges: X = 750 mm, Y = 600 mm, Z = 520 mm Speed range: 20–18,000 rpm Tool interface: HSK 63 Tool magazine with 92 tool positions Laser tool measurement system integrated in the machine High-pressure internal cooling through the spindle center, 40 bar 3D probe Band filter General overhaul in 2021 The following work was carried out during the general overhaul: Replacement of hydraulic lines Replacement of linear guides and ball screws of the X, Y, and Z axes, including associated bearings and timing belts Dwjdpfs Ahxzqex Aidjd Replacement of scrapers and bellows Work carried out most recently in 2026 Repair of the Z-axis servo motor Replacement of the hydraulic unit for lubrication Replacement of the AC servo controller of the X-axis

Condition: used, Year of construction: 2008, x-travel 630 mm y-travel 560 mm z-travel 560 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 10 / 15 kW max. Torque 130 / 87 Nm tool taper HSK-A63 swivellable NC: ° table surface area 1.000 x 600 mm T-slots 9x 14 x H7 max. table load 700 kg Dwjdpfxex A H Rle Aidjd number of toolpositions 60 pos. tool taper HSK-A63 total power requirement 49,7 kVA weight of the machine ca. ca. 11,0 t dimensions of the machine ca. 4,5 x 4,5 x 3,5 m CNC - MachiningCenter Universal DECKEL MAHO - DMU 60 monoBLOCK - 4 axes (+ NC dividing head) - Swivel-Millinghead - Spindle refurbished - NEW X, Y, Z guideways - NEW ball screws - NEW X-axis bellows

Condition: used, X-axis: 640mm, Y-axis: 600mm, Z-axis: 500mm, feed force (40% duty cycle) X-, Y-, Z-axis: 7000N, max. feed speed X-, Y-, Z-axis: 40m/min, rapid traverse speed Y-, Z-axis: 40m/min, rapid traverse speed X-axis: 70m/min, ball screw diameter/pitch Y-, Z-axis: 40/15mm, number of magazine pockets: 30, position coding: fixed-position coding, max. tool loading weight: 90kg, max. diameter of standard tools: 100mm, max. diameter of special tools with adjacent positions free: 140mm, max. tool length: 300mm, max. tool weight: 6kg, table clamping surface: 850x600mm, T-slots: DIN 650-14, loading height (top edge of table): 850mm, max. load: 600kg, connected load: 39kVA, control: Heidenhain iTNC 530, length: 2500mm, width: 4100mm, height: 3000mm, weight: 7,74t, operating hours: 60.366h. With documentation. Dsdpfx Aezuwxqeidewd

Condition: used, Year of construction: 2009, x-travel 835 mm y-travel 510 mm z-travel 510 mm CNC-control iTNC530 HEIDENHAIN table-size 1000 x 560 mm max. table load 800 kg spindle taper SK 40 spindle turning speed range 20 - 14.000 U/min feed stepless 1 - 20.000 mm/min rapid traverse 20 m/min drive capacity - spindle motor 13 / 9 kW tool change unit 32 Pos coolant IKZ 25 bar voltage 400 V total power requirement 30 kVA weight of the machine ca. 4,5 t dimensions of the machine ca. 2,25 x 3,20 x 2,30 m chip conveyor 3,50 x 0,85 x 1,55 m coolant equipment 1,40 x 1,60 x 1,80 m spindle oil cooler 0,40 x 0,50 x 1,00 m - Serial-No.: 15415041384 - Machine ON: 72,882 h - Program Run: 25.267 h - control: HEIDENHAIN iTNC 530 - Linear scales in all 3 axis - electr. handwheel - Tool changer 30 pos. with double gripper - Chip conveyor - TSC with belt filter system - Coolant unit Dsdpfxoy Ty A Ss Aidowd - new ball screw incl. bearings (X-Axis)

Condition: used, Year of construction: 2002, x-travel 2.200 mm y-travel 560 mm z-travel 720 mm control 840 D Powerline ShopMill Siemens Main spindle: turning speed range - main spindle 20 - 12.000 min/-1 power capacity - main spindel 35 / 25 kW max. Torque 130 / 87 Nm tool taper SK 40 internal coolant system feed 40 bar work table: table surface area 2.600 x 600 mm max. table load 2.200 kg number of T-slots 6 T-slot - width 18 H7 mm Dwodpstqmr Rsfx Aidjd T-slot - distance 100 mm Tool-Presetter: number of toolpositions 30 pos. max. tool length 300 mm max. tool weight 6 kg max. tool diameter 80 / 125 mm feeds: feed speeds 20.000 mm/min input unit 0,01 mm rapid traverse ( X / Y / Z ) 100 / 50 / 50 m/min measuring system Resolution 0,001 mm total power requirement 60 kVA weight of the machine ca. 12,5 t dimensions of the machine ca. 6,0 x 3,7 x 2,9 m CNC - Machining Center Vertical DECKEL MAHO - DMF 220 linear - from individual part production (aluminium, brass and stainless steel) - incl. workroom wall - M26 function (switching to blown air through spindle center) - new ball screw Z-axis incl. bearing (April 2015) - new milling spindle (2016) - Spindle hours: ca. 11,966 h - WITHOUT vices

Condition: good (used), Year of construction: 2015, The machine is in good technical condition, testing can be arranged by prior agreement. Dsdpfx Aij Aibuwjdowd

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, machine/vehicle number: 15405034874, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 20 kVA, controller manufacturer: HEIDENHAIN, controller model: ITNC 530, total height: 2,400 mm, total length: 2,500 mm, total width: 2,100 mm, table width: 560 mm, table length: 790 mm, table load: 600 kg, overall weight: 7,000 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 11,164 h, number of slots in tool magazine: 20, mount diameter: 40 mm, tool length: 300 mm, tool diameter: 80 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 35 A, feed force X-axis: 5,000 N, feed force Y-axis: 5,000 N, feed force Z-axis: 5,000 N, DECKEL MAHO DMC 635 V CNC Vertical Machining Center Dodpfx Aie Afulmodswd - Tool holder: SK 40 - Input resolution X/Y/Z: 0.01 mm - Path measuring system resolution X/Y/Z: 0.001 mm - Positioning tolerance in X/Y/Z with indirect measuring system: 0.020 mm, with direct measuring system: 0.008 mm - Max. tool diameter: 80 mm without free spaces, with free spaces: 130 mm - Max. tool length from spindle nose: 300 mm - Max. tool weight with automatic tool changer: 6 kg - Distance between T-slots: 100 mm - Number of clamping slots: 4 Note: without the machine vices shown in the photos! Includes the SK 40 tool holders located in the tool changer, as well as a 3D measuring probe. Note: Spindle needs to be inspected! FCA D-71679 Asperg - loaded onto a truck.

Condition: excellent (used), Year of construction: 2002, operating hours: 18,419 h, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: Heidenhain, table load: 350 kg, number of axes: 5, TECHNICAL DETAILS X-axis travel: 630 mm Y-axis travel: 560 mm Z-axis travel: 560 mm Table length: 1,000 mm Table width: 600 mm Rotary table diameter: 600 mm Table weight: 800 kg Table load capacity: max. 350 kg Number of T-slots: 8 / 1 T-slot width: 14 H12 / 14 H7 mm T-slot spacing: 63 mm Dedpfx Aij Afw Auodswd C-axis swivel range: 360° Tool interface: SK 40 Tool positions: 24 MACHINE DETAILS Control system manufacturer: Heidenhain Spindle operating hours: 18,419 h Total operating hours: 50,446 h EQUIPMENT 5-axis machining (3+2) NC-controlled swivel milling head (B-axis) NC rotary table (C-axis), integrated into the fixed machine table 24-position tool changer

Condition: excellent (used), Year of construction: 2006, operating hours: 4,895 h, functionality: fully functional, machine/vehicle number: 11415553974, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, total height: 2,300 mm, total length: 3,000 mm, total width: 3,000 mm, overall weight: 6,000 kg, DECKEL MAHO DMU 50 – 5-axis CNC machining center Technical data: Manufacturer: DECKEL MAHO / DMG Model: DMU 50 Year of manufacture: 2006 Serial number: 11415553974 Control system: HEIDENHAIN iTNC 530 Dweds Afwhqjpfx Aided Axes: 5 (X, Y, Z, B, C) Travel range X: 500 mm Travel range Y: 450 mm Travel range Z: 400 mm Spindle speed: up to 8,000 rpm (manufacturer's standard, to be confirmed) Tool holder: HSK 63 NC rotary table: B and C axes Table size: 630 × 500 mm (manufacturer's specification) Maximum table load: 200 kg (manufacturer's specification) Operating hours: approx. 25,632 h Second hour counter: approx. 4,895 h Connected power: 17 kVA Operating voltage: 400 V / 50 Hz Condition: Used, well-maintained appearance. Important: The machine is sold exclusively without any accessories. No tools, tool holders, or machine vises are included. Inspection possible by appointment.

Condition: good (used), Year of construction: 2001, functionality: fully functional, Net price: €14,200.00 Gross price: €16,898.00 You will receive a proper invoice with VAT shown. Internal article number: 26100 Deckel Maho DMU 50 T 5-axis (3+2) CNC machining center Year of manufacture: 2001 Operating hours: approx. 31,000 hours Program run time: approx. 8,500 hours + Documentation (operating manual, electrical wiring diagram, floppy disks) + Electronic handwheel Technical data Dwsdpfxj Ahhggs Aided Control: Heidenhain TNC426 Tool holder: SK 40 Tool places: 16 Travel distances X/Y/Z: 500 mm / 400 mm / 400 mm Spindle speed range: 20 - 9000 rpm Table size: 700 mm x 500 mm rotary table Motor power: 9 kW at 100% duty cycle / 13 kW at 40% duty cycle Connection: 17 kVA Weight: approx. 3000 kg Dimensions L x W x H: approx. 200 x 160 x 220 cm The machine is fully functional, in good condition and can be inspected and demonstrated in our heated warehouse with over 500 m² of space, while powered on. If you have any further questions, please do not hesitate to contact me by telephone at any time.

Condition: ready for operation (used), Year of construction: 2008, Make: DECKEL MAHO Type of machine: DMC 635 V Year of manufacture: 2008 Control system: Heidenhain iTNC 530 Tool holder: SK 40 x-travel: 635 mm y-travel: 510 mm z-travel: 460 mm Dwsdpfj Ah Spwex Aidsd Speed range: 10.000 U/min max. Table load: 600 kg Operating time: 22.646 h Spindle operating time: 8.241 h Table dimensions: 790 × 560 mm Number of tools in the magazine: 24 Plätze Internal coolant supply: 20 bar

Condition: ready for operation (used), Year of construction: 2004, operating hours: 22,636 h, travel distance X-axis: 1,040 mm, controller manufacturer: HEIDENHAIN, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis DECKEL MAHO vertical machining centre was manufactured in 2004. It features a Heidenhain CNC controller with a full QWERTY keyboard and an automatic tool changer for enhanced efficiency. The machine has a power requirement of 39 kVA and a total of 37,124 power-on hours. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO vertical machining centre we have for sale. Contact us for further details. Dedpfx Ais Aih Igodewd - Total Operating / Power-on Hours: 37,124 h - Spindle / Cutting Hours: 22,636 h - Apparent Power: 39 kVA - Nominal Current (Jn max): 56 A - Full Load Fuse Rating: 63 A - Mains Supply Voltage: 400 V - Control / Secondary Voltages: 230 V / 24 V

Condition: good (used), Year of construction: 2011, functionality: fully functional, Technical details x-travel 500 mm y-travel 450 mm z-travel 400 mm Control Heidenhain iTNC 530 tool taper HSK 63 total power requirement 34 kVA weight of the machine ca. 4810 kg Accessories oil-mist-extractor Additional information Operating hours: 89.800 Spindle hours: 43.800 Machine with new milling spindle, replaced 2026. Dods Ahn Hyjpfx Aidowd CNC control: Heidenhain iTNC 530 Equipment and accessories: Pallet changer (Automation PH 150/8) 60-position tool changer Electronic handwheel HR 410 Touch probe (TS) Chip conveyor Internal coolant supply system Oil-mist-extractor Machine without tool taper and clamping devices.

Condition: used, Year of construction: 1990, operating hours: 70,042 h, functionality: fully functional, machine/vehicle number: 120035, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, total height: 2,645 mm, total length: 3,560 mm, total width: 2,840 mm, overall weight: 11,000 kg, Equipment: chip conveyor, Control system: 432, software version 700 (4th axis = rotary table) Dwedpfsz Ngqqjx Aidsd 60-position tool changer (tool length/diameter/weight = 315 mm/125 mm/10 kg) Clamping surface of the CNC rotary table: D1000 x 820 mm Table load capacity: 1000 kg Travel distance, longitudinal (X-axis): 1200 mm Travel distance, transverse (Z-axis): 600 mm Travel distance, vertical (Y-axis): 600 mm Spindle mount: ISO40 Spindle speed, continuously variable in 2 ranges: 20-6300 rpm Feed rates, X, Y, and Z axes: 1-4000 mm/min Rapid traverse, X and Z axes: 12 m/min Rapid traverse, Y axis: 10 m/min Feed rate, rotary table movement (B-axis): 1-1500 °/min Rapid traverse, rotary table movement: 10 rpm Spindle drive: 15 kW Total connected load: 40 kVA Weight, approx.: 11000 kg Space requirement, approx. (L x W x H): 3560 x 2840 x 2645 mm Technical data subject to change without notice. Errors and prior sale excepted.

Condition: excellent (used), Year of construction: 2001, I have a Deckel Maho DMU 60T machining center for sale. Control system: Heidenhain 430 Technical condition of the machine: Very good Year of manufacture: 2001 Country of origin: Germany Machine parameters: Dwedj Ahdrvspfx Aided X-axis travel: 630 mm Y-axis travel: 560 mm Z-axis travel: 560 mm Swiveling head Maximum spindle speed: 12,000 rpm Tool magazine: 24 tools (2 x 12 tools) Heidenhain linear scales on all axes Chip conveyor Central lubrication Hydraulic tool clamping Spindle taper: SK40 Complete programming manual Mechanical and electrical documentation Loading is included in the price Stal-Com has been involved in the sale, service, and training for CNC machines from the DMG group for 20 years. We specialize in all models of Gildemeister lathes and Deckel Maho machining centers. All machines undergo a thorough technical inspection. Our machines are purchased not only by customers in Poland but also by customers throughout Europe and parts of Asia. Each machine can be inspected during production, as we also offer machining services. After purchasing a machine from our company, we provide training for the staff and can also set up production at the customer's facility. We cooperate with many companies on a long-term basis, supplying them with additional machine tools.

Condition: good (used), Year of construction: 2001, functionality: fully functional, CNC Horizontal Machining Center Dsdpfx As Ah H Txjidjwd Deckel Maho DMC60H Year: 2001 Approx. 55,000 operating hours The machine has been regularly maintained, is fully functional, and is currently ready for demonstration while powered on. TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 560 mm Z-axis travel: 560 mm Control system: Siemens Sinumerik 840D Spindle speed: 15,000 rpm Tool interface: HSK-A63 Rapid traverse rate X/Y/Z: 60.00 m/min Tool magazine: 90 tools EQUIPMENT Number of axes: 4 Pallet changer (RS4) with 6 positions Coolant system with internal coolant supply at 40 bar Chain magazine: 90 tool positions Chip conveyor Tool laser measurement system BLUM Electronic handwheel MACHINE DETAILS Total power requirement: 65.00 kW Drive power 40% duty cycle: 20.00 kW Drive power 100% duty cycle: 13.00 kW Machine weight: approx. 16.00 t Space requirement: approx. 9.00 x 4.50 x 3.50 m

Condition: good (used), Year of construction: 2019, operating hours: 18,400 h, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, workpiece length (max.): 2,600 mm, workpiece width (max.): 700 mm, total height: 2,700 mm, total length: 6,335 mm, total width: 4,600 mm, table load: 1,500 kg, overall weight: 16,000 kg, spindle speed (min.): 15,000 rpm, spindle speed (max.): 20 rpm, operating hours of spindle: 11,370 h, coolant supply: 40 bar, spindle nose: SK40, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Travel ranges & dynamics • X-axis: 2,600 mm • Y-axis: 700 mm • Z-axis: 700 mm • Rapid traverse rate / feed rate: 40 m/min Work table (fixed table) • Clamping area: 2,900 x 700 mm • Max. table load: 2,150 kg Milling spindle (standard configuration) Dedpfxoz Indho Aidewd • Max. speed: 15,000 rpm • Drive power (40% duty cycle): approx. 18.9 – 20 kW • Tool holder: SK 40 Tool magazine • Tool positions: 30 • Max. tool length: 300 mm

Condition: excellent (used), Year of construction: 2000, operating hours: 24,695 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, spindle speed (max.): 15,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: approx. 1,000 mm Y-axis travel: approx. 800 mm Z-axis travel: approx. 500 mm Table length: approx. 1,250 mm Table width: approx. 800 mm Table load capacity: max. approx. 1,200 kg Spindle speed: up to approx. 15,000 rpm Tool holder: SK 40 MACHINE DETAILS Control system: Heidenhain Spindle operating time: 24,695 h Machine operating hours: 64,814 h Control system operating hours: 72,542 h EQUIPMENT Automatic tool changer Renishaw probing system Coolant system Chip conveyor Dsdps Afxn Sofx Aidewd

Condition: good (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 935 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 650 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530 HSCI, table load: 1,000 kg, overall weight: 14,000 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 60, Commissioned in 2013 with RS 3 circular tool magazine (3 pallets) Control system: Heidenhain iTNC 530 HSCI Approx. 60 tools - SK40 IKZ (internal coolant supply) Heidenhain infrared probe Blum laser measuring system 3D Quickset Air cleaner Dsdpfx Ais Agnwdodowd electric handwheel

Condition: repair required (used), Year of construction: 1999, functionality: not functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 5 m/min, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, controller manufacturer: Heidenhain, controller model: TNC 310, table width: 500 mm, table length: 700 mm, table load: 200 kg, rotational speed (max.): 5,000 rpm, overall weight: 3,000 kg, spindle speed (max.): 5,000 rpm, spindle nose: SK40, input voltage: 400 V, DECKEL MAHO DMU 50 M CNC | Heidenhain TNC 310 | Year 1999 | Damaged For sale: Deckel Maho DMU 50 M CNC machining center from 1999, equipped with Heidenhain TNC 310 control. The machine is sold as damaged – it displays error 120202 during startup, therefore it is offered as a unit for repair or for parts. The error indicates a lack of connection to the PLC controller. Technical data * Manufacturer: Deckel Maho * Model: DMU 50 M * Year of manufacture: 1999 * Control: Heidenhain TNC 310 * Machine type: Universal CNC milling center (3+2 axes) Working parameters Dedpfxe Adzt Is Aidjwd * X-axis travel: 500 mm * Y-axis travel: 400 mm * Z-axis travel: 400 mm * Table surface: 700 × 500 mm * Maximum table load: approx. 200 kg * Spindle speed range: 0-5000 rpm * Spindle taper: SK40 * Maximum working feed rate: 5000 mm/min * Rapid traverse: 5 m/min ## Equipment * Heidenhain TNC 310 control * Manual tilting/rotary table: * B-axis: from -10° to +95° * C-axis: 360° * Cooling system * Safety guards ## Technical condition The machine is sold as non-functional. Error message 120202 appears during startup. The error has been discussed with a service technician, who indicates damage to the middle LT module - the module itself reports error 1. Repairing the module, depending on the extent of the damage, costs between 5,000 and 8,000 PLN. The machine is sold in the condition shown in the photos. Ideal for a service company, someone involved in CNC machine repair, or as a source of spare parts. It was in continuous use until October 2024. ## Additional information * Year of manufacture: 1999 * Weight: approximately 3000 kg * Power supply: 400 V * Loading possible. * Viewing by prior arrangement. Price: negotiable I will issue a VAT invoice. The stated price is the net price. Please contact me by phone and arrange to view the machine. Machine loading is not possible - sold without loading. We do not have a forklift with the appropriate lifting capacity.

Condition: used, Year of construction: 2002, machine/vehicle number: 810715, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: Siemens, controller model: 810D, table width: 500 mm, table length: 800 mm, table load: 500 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: DC, Equipment: chip conveyor, documentation/manual, Vertical machining center DECKEL MAHO DMC 63V Year of manufacture: 2002 Machine number: 810715 Condition: Used Delivery terms: Free on truck Location: 57482 Wenden Availability / Collection date: The machine is expected to be available in November 2026 and must be collected on a fixed date to be agreed upon (likely in calendar week 48-2026). Payment terms: Payment in advance - by bank transfer Internal no.: 181-1 Can be inspected while running: Yes Technical data: Control: Siemens Sinumerik 810D Tool holder: SK 40 Operating hours: 76,500 (will increase slightly, as the machine is still in production until collection) Spindle hours: 24,100 (will increase slightly, as the machine is still in production until collection) Travel distances X / Y / Z: 630 / 500 / 500 mm Table dimensions: 800 x 500 mm Table load: 500 kg Tool changer: 24-position Feed rate in X / Y / Z: 30,000 mm/min Rapid traverse rate in X / Y / Z: 30,000 mm/min Spindle speed max.: 10,000 High-pressure coolant system Chip conveyor 400 V / 30 kVA / 50 Hz Scope of delivery: Available manuals The hydraulic vices, the associated hydraulic unit, the tool holders, and the zero-point clamping system are not included in the scope of delivery! Dimensions & Weights: Installation dimensions L x W x H approx.: 4000 x 3000 x 2650 mm Weight approx.: 5000 kg If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional information: Dsdpfx Aoz Nhizsidowd ►Upon request, we can offer transport to the destination. ►The quoted price is net plus VAT. ►The goods are sold with the exclusion of any warranty. ►Technical data without guarantee. ►Subject to prior sale. ❗The sale of the goods is exclusively to business customers❗

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 18378, operating hours of spindle: 30,620 h, For sale is a highly precise and dynamic 5-axis CNC universal machining center from the reputable manufacturer DECKEL MAHO, model DMU 80 P hi-dyn, manufactured in the year 2000. This machine comes from the proven "hi-dyn" series (High Dynamics), which is characterized by extremely fast rapid traverse speeds, high acceleration values, and a robust portal design. It is ideally suited for highly precise 5-sided and 5-axis simultaneous machining in demanding tool, mold, and prototype construction. The machine is in operational condition and impresses with the combination of large travel ranges, an NC swivel rotary table, and stable machine kinematics. Equipment: - Rotary table - mounted special clamping device - 2 precision vises - viewing window - Heidenhain TNC426 control unit - 60-position tool changer SK40 Dodpe Afphijfx Aidewd - chip conveyor - separate coolant system with band filter Attractive offer – flexible & worry-free We offer you not only a high-quality product but also customized financing options that adapt to your needs. Whether it's a down payment, installment payments, or individual financing models – together we will find the right solution. On request, we can also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process, so you don't have to worry about anything. 📞 Please contact us for further information or a non-binding offer. We will provide you with personal and competent advice. Subject to prior sale, changes, and errors!

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, DMU90P duoBLOCK Operating hours: 52,700 h Operating hours: 22,700 h Immediately Available! Dwedpfx Ae Aa Ayusidsd Control: HDH iTNC640 Travel: X-900 mm, Y-1050 mm, Z-850 mm clamping surface: 900 x 700 mm max. table load: 1.800 kg Spindle mount: SK50 Spindle speed: 12,000 rpm tool magazine: 60 seats Internal coolant supply (IKZ) and chip removal package: 40 bar Tool measurement: BLUM Laser probe: Heidenhain electric handwheel: Yes