Used Porcupine Cutter for sale (2,807)

Condition: good (used), Year of construction: 2015, functionality: fully functional, punching force: 330 t, Machine for punching, embossing, waste removal, and separating waste sheets - as is - System equipped with a high-performance sheet feeder for automatic NON-STOP operation ⦁ For fully automatic punching, scoring, and embossing with or without gripper edges ⦁ For removing the inner waste as well as the side and rear sheet edges ⦁ For stacking the punched and removed sheets with the attached gripper edges, or ⦁ For separating the gripper edges and subsequently stacking the remaining sheets ⦁ With a patented gripper carriage register system for maximum registration accuracy ⦁ With a package stacking machine that enables fully automatic feeder operation and NON-STOP stacking, and does not need to be reconfigured even for the smallest cut sizes. (Rotary table with comb structure) ⦁ Separator magazine with electric stock control, can be refilled during production ⦁ With centerline equipment ⦁ With automatic pallet changing device in the stacker Specification Sheet format max. 760 x 1060 mm Sheet format min. 350 x 400 mm Csdpfxez H Smwj Aizeri Maximum punching force 3.3 MN (330t) Speed 9,000 sheets/h Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/m² Corrugated board up to 3 mm (max. sheet curvature 4 %) Machine configuration Feeder • Fully automatic non-stop feeder with logistics for processing Euro pallets, system pallets and disposable pallets • Preset function for W4 feeder • Automatic format adjustment of the suction head • Automatic stack side limitation in the feeder System • Dyset Pro bar system • Lateral sheet alignment based on registration marks or sheet edge, max. ±10 mm • Optical side mark Punching station • Vacuum punching plate for the use of 1 mm punching plates • Pneumatic closing frame with quick-release function • Motorized punching plate fine adjustment via touchscreen, adjustment range ±1.5 mm • Motorized punching pressure adjustment Waste removal • Quick-release frame for fixed tools • Sheet guiding device • Integrated quick-release system with fine adjustment for accommodating waste removal frames with fixed tools Stacker • Quick-release frame for fixed tools • Brake brush stacker • Integrated quick-release system with fine adjustment for accommodating separating frames with fixed tools

Condition: used, Year of construction: 1973, Indexing milling cutter with 3-roller feed spindle, 30 mm diameter. Location: Nattheim. Credpfxozd Tg As Aizji

Condition: excellent (used), Robot Coupe R23 VCM 2 speed machine 3 blade set up Tipping discharge Crsdpfo Agvm Usx Aizoi Process timer In good running order

Condition: excellent (used), functionality: fully functional, working width 3100 mm working height 47 mm manual fence adjustment to size main motor power 4 kW cast iron body safety light barriers power supply 380V Codpszxp Raefx Aizjri

Condition: ready for operation (used), Year of construction: 1978, operating hours: 300 h, functionality: fully functional, machine/vehicle number: UWII/2567/78, Tool grinding machine Motorized height adjustment has been repaired Spare parts supply secured by repair shop >Grinding table 835 x 145 mm< Longitudinal travel by hand 500 mm Pivotability 90 degrees >Grinding head< Transverse movement 220 mm Credpfxsv Hcblj Aizsi Height adjustment 250 mm Pivotability horizontally and vertically - 360 degrees Extension of the working range via eccentric plate Grinding spindle D60x240 mm Speeds - 2 belt speeds 3300/5400 rpm Weight approx. 700 kg Space requirement 1800 x 1300 x 1600 mm The machine is functional; all movements can be controlled by handwheel.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Inline Cutter/Emulsifier Brand: Inotec GmbH Credpfjwxza Nox Aizsi Model: I175CDI-75 Machine number: 103-00605 Year of manufacture: 2007 Voltage: 230/400 V, 50 Hz, 152 A Power: 91 kW, 106 kVA Dimensions: 2000 mm x 900 mm x 850 mm With distribution cabinet Dimensions: 1200 mm x 600 mm x 2100 mm

Condition: like new (used), Year of construction: 2026, functionality: fully functional, Kilia 325 Liter Cutter 5000 Express – Factory overhauled 2025 Powerful high-performance cutter system with extensive general overhaul – ready for continuous use in professional food processing Top Features & Highlights: Overhauled in 2025 – numerous main components newly installed: Vacuum pump Base plate Main motor & plate motor Knife shaft incl. bearing Electronic control incl. new control cabinet (stainless steel) Frequency converter Cedpfx Ajyk Tuuoizori Hydraulic cylinder & unit Ejector motor & bearing Feeder motor & bearing Electronic control panel with 10-inch touch panel & joysticks All scrapers Technical equipment: Robust stainless steel design (machine & bowl) High-performance knife shaft drive, infinitely variable from 50–4000 rpm, with reverse (50–500 rpm) Knife shaft drive power: 81 kW, bowl: 3 kW (400 V, 50 Hz) Hydraulically operated noise protection cover (double-walled, stainless steel) Fully automatic ejector (hydraulic) Maintenance-free knife shaft system Automatic central lubrication (ADS 100) Knife shaft brake (electric) 6-knife set Knecht K24 Thermometer & tachometer with end shut-off (electronic) Hydraulic knife tension nut Loading system for 200-liter trolleys (hydraulic) Vacuum function for highest product quality Integrated maintenance and inspection module Remote diagnosis via encrypted internet connection (broadband required) Separate stainless steel control cabinet (wall-mountable) Manual or automatic water addition

Condition: good (used), Samed Innovazioni MM 1 Corner cutter for hardcovers Produced in Italy, Samed Innovazioni Rebord. Very good condition. This is a professional, production device for cutting corners for hardcover. Year of production 2014. Solid construction ensures precision of operation. Crsdpfx Aez N Sh Uoizji Interchangeable knives. Adjustable cutting depth. One set of knives included.

Condition: good (used), Tranklein EH I corner cutter Made in Germany. Perfect condition. This is a professional device for rounding corners. Solid cast iron construction, strong pressure ensure precision of operation. Interchangeable knives. Adjustable margins. A knife with a radius of 4 mm is included. Stack height 55 mm Weight 32 kg Credpfxoz N Si Se Aizoi This is the currently produced model.

Condition: new, functionality: fully functional, MARCELISSEN SHC (Compact Hydro Cutter) | Hydro Cutter for cutting fries and root vegetables Manufacturer: Marcelissen Food Processing Machinery Model / Type: SHC / Hydro Cutter (Compact Hydro Cutter) Condition: New Power supply: 400 V, 50 Hz, 3-phase Crodpez N S E Hefx Aizsi Capacity: up to 10,000 kg/h (10 t/h) Working area: approx. 7.5 m² Overall dimensions: modular line with a total length of approx. 6000–7500 mm x width 1500 mm x height 2200 mm The industrial Marcelissen SHC (Compact Hydro Cutter) is an advanced line designed for hydromechanical, continuous cutting of potatoes and other root vegetables (carrots, beets) into fries, sticks, wedges, and slices. The operating principle is based on the use of a water jet as a pressure medium: the product placed in a buffer tank is drawn in and accelerated in a closed pipe system, and then passes through a stationary knife block under high pressure. Thanks to the hydraulic guidance of the raw material in the pressure channel, the product hits the knives perfectly axially, which eliminates mechanical damage and cracking of the fries, guaranteeing a uniform, smooth cross-section and maximum yield. The device is ideal for large fruit and vegetable processing plants, french fry factories, frozen food factories, as well as established butcher shops and catering companies that produce ready-to-eat products. The well-thought-out, modular compact design ensures that the line occupies less than 7.5 m² of floor space while maintaining a very high capacity of up to 10 tons per hour. The quick-change system for knife cassettes allows the machine to be reconfigured for a different cutting format in less than a minute, which minimizes production downtime.

Condition: used, Year of construction: 1982, Format: 0x0 Equipment: Corner cutter, manual Csdpfox Rh Dxsx Aizsri

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Technical Data Grinding/Workpiece Diameter: up to approx. 300 mm (partially up to 350 mm) Grinding Length/Stroke: approx. 550 mm (slide travel) Module range (for hobbing cutter resharpening): min. module approx. 0.5 to max. module approx. 25 Number of flutes: typically 1–99 pieces (depending on tool set) Grinding wheel diameter: approx. 150–300 mm Grinding wheel speed: up to about 2,700 rpm Centre distance (workpiece spindle): typical range 400–800 mm Swivel/Pitch range: e.g. grinding wheel head swivel 0–15° Machine weight and space requirement: approx. 4.2–4.9 t weight; space approx. 3 × 2.6 × 2.3 m Electrical data: operating voltage e.g. 380 V three-phase, control 24 V, auxiliary voltage 220 V Cjdpfoxtiunex Aizeri

Condition: excellent (used), Year of construction: 2006, Ref: 11165 . 2006 Young Shin Revotec 106 SR Automatic flatbed die cutter engineered for precision die cutting and stripping Only 12 Million Sheets Run! Features: Bobst die compatibility Integrated lead-edge removal 20% heavier frame than comparable models offers exceptional stability and accuracy The 25% higher impression tonnage expands substrate flexibility Non-stop delivery apron supports continuous production Specification: Cjdpfxe Affa Ue Aizori Maximum Sheet Size 1060 x 760 mm Minimum Sheet Size 400 x 340 mm Maximum Cutting Size 1060 x 745 mm Inside Chase 1140 x 784 mm Minimum Gripper Margin 8 mm Maximum Speed 7500 sph Maximum Cutting Pressure 300 Tons Sheet Thickness Manila: 0.1 – 1.5 mm Corrugated Board: E, B Flute (Max. 4 mm)

Condition: good (used), Conveyor belt for waste removal guillotine, three-knife, automatic die-cutter Production Germany Working width 52 cm, conveyor belt length approx. 300 cm. Credpfoz N Sfmox Aizji Discharge of scrap from under the machine directly to the container.

Condition: used, functionality: fully functional, overall weight: 2,800 kg, Year of construction: 1996, Rock/Excavator-mounted milling cutter Cutting head diameter x width: 750 x 1,500 mm 76 cutting tools Maximum operating pressure: 300 bar Cutting force: 60 kN Crjdpfsz Az S Isx Aizoi

Year of construction: 2022, condition: like new (used), functionality: fully functional, WOOKIL MEGACUT MC-2500 Die Cutter MAX. SHEET SIZE: 1800x2600 mm Crodpfxjz Suafs Aizji MAX. CUTTING SIZE: 1700x2500 mm MAX. CUTTING PRESSURE: 550 tons

Condition: used, Year of construction: 2010, operating hours: 16,000 h, functionality: fully functional, machine/vehicle number: E1053A0011, overall weight: 850 kg, total height: 1,940 mm, total length: 1,700 mm, total width: 950 mm, Specification: Cjdpfxswq Rhms Aizjri Protection rating: IP54 Power: 16kW/17 kVA 24A at 400V Frequency: 50-60 Hz Supply voltage: 380V (-10%) to 460V (+10%) The Trumpf Laser TruDisk 2602 is a powerful and robust laser system, ideally suited for demanding industrial applications. With its high precision and efficiency, it enables fast and high-quality cutting processes with various materials. The compact design ensures easy integration into existing production lines, while the innovative technology guarantees stable and long-lasting performance.

Condition: excellent (used), Year of construction: 2012, control type: CNC control, controller manufacturer: Mazatrol, laser power: 4,000 W, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,525 mm, travel distance Z-axis: 150 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, overall weight: 12,700 kg, total length: 8,500 mm, total width: 4,500 mm, total height: 2,800 mm, Machinery manufacturing: Producing machine covers, brackets, panels and structural components. Automotive industry: Manufacturing brackets, components and prototype parts. Agricultural machinery: Producing parts for tractors, trailers and agricultural equipment. Construction and steel fabrication: Cutting connection plates, mounting brackets and structural parts. HVAC and ventilation: Manufacturing ventilation components, panels and ductwork. Automatic sheet loading and unloading system – Large overhead gantry with integrated sheet handling equipment, suitable for automated material transfer. Mazak CELL 510 VA automation system – Separate automation control cabinet, identified by its nameplate and operating panel. Automatic pallet changer / shuttle table – Two cutting pallets allow material preparation and unloading while the machine processes another sheet. Dust extraction equipment – Large extraction ducting and associated equipment visible, although the complete filtration installation cannot be verified. Safety enclosure – Perimeter safety fencing with access gates and emergency-stop controls around the automation system. Machinery manufacturing: Producing machine covers, brackets, panels and structural components. Crjdpfx Aij Agfxnezsi Automotive industry: Manufacturing brackets, components and prototype parts. Agricultural machinery: Producing parts for tractors, trailers and agricultural equipment. Construction and steel fabrication: Cutting connection plates, mounting brackets and structural parts. HVAC and ventilation: Manufacturing ventilation components, panels and ductwork. Electrical cabinet manufacturing: Cutting enclosures, control panels and mounting plates. Main technical specifications Working area: Approximately 3,050 × 1,525 mm Mild steel cutting capacity: Up to 25 mm Stainless steel cutting capacity: Approximately 12 mm Aluminium cutting capacity: Approximately 10 mm Working area X Axis: 3050mm Working area Y Axis: 1525mm Working area Z axis: 150mm Table Length: 3000mm Table Width: 1500mm Power resonator: 4000kW / Amp Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Sheet master loading arm:yes Dust collector: yes Length: 8500mm Width: 4500mm Height: 2800mm Weight: 12700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), TYMC-800 Honeycomb Hot Foil Stamping Machine The latest version, with a honeycomb plate for locks. The machine is designed for hot foil stamping, hot stamping, and standard die cutting without having to remove the hot plate. The machine is brand new and comes with a warranty. Format: Die-cutting 830x590mm Gold plating 800x540mm Weight 3000kg Operating speed 25 cycles/min Foil feed 1-500mm Operating temperature 20-150°C Power supply 380V Equipment: – Electromagnetic clutch and brake – Quick-assembly frame – Control panel with touchscreen PLC programmer Codpfxsz E A Nmj Aizsri – Two independent feeds, controlled by stepper motors – 3 operating modes: continuous, time-delayed, manual – Four independent heating systems, saving energy – Central lubrication – Additional safety guards – Photocells – Operating tools and instructions, CE declaration – Pressure plate Machine available immediately We provide installation and training (individual pricing) 12-month warranty. The machine is brand new. Our machines are among the few that meet all the standards required for operation in Poland. Testing is available at our showroom in Radom.

Condition: good (used), Code: 0489 Brand: CASATI MACCHINE Model: 3100 - CE Standard Automatic veneer guillotine for joinery, furniture, doors, window and door frames, sliced veneers and other applications – CE Standard Technical data: Cjdpsz Hlyksfx Aizjri Sturdy structure Hydraulic power unit for blade cutting movement Cutting length 3100 mm Electrically operated rear stop Cutting inspection light Pump motor 4 Hp Register motor 0,5 Hp Safety photocells Side guide for angled cuts Overall dimensions mm 4150 x 1600 x 1500 h Weight kg 3200

Condition: used, Mobile micro cutter Inotec -Type: I175CD-90RW -Power: 115 kW -Year of manufacture: 2017 -Knives and sieves included -Cutting set diameter: 175 mm -Power supply: 400 V 3Ph 50 Hz Crodpe Afwtljfx Aizji -Dimensions: 1750 x 1150 x 1580 mm -With control cabinet -Cabinet dimensions: 2070 x 750 x 2000 mm -Condition: used in very good condition

Condition: good (used), Year of construction: 2007, functionality: fully functional, Equipment: safety light barrier, Offer includes: Polar 115 X, manufactured in 2007, including spare blades and side air tables. Crjdpfxjz Nz Tye Aizei

Condition: like new (used), Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2026-078, working width: 1,600 mm, working height: 100 mm, warranty duration: 6 months, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials.. Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Crsdpfx Aiewgc I Rszji Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: used, Year of construction: 2006, An industrial contour cutting machine with a conveyor section is offered. Equipped with stainless steel cladding, roller holder, conveyor section and operating device. Viewing possible by appointment. Codpfxe Agn N Ej Aizeri

Condition: good (used), Year of construction: 1979, functionality: fully functional, machine/vehicle number: 1137.05, Used tool grinding machine Manufacturer: KAPP Model: AST305B Credpfxowzk R No Aizoi Year of manufacture: 1979 Serial number: 1137.05 With accessories