Used Pot Devin for sale (547)

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. Lsdpofz U S Eofx Alyjah The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations Ledpfx Alsflmdweyoah The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Condition: used, Portas BEV electro-pneumatic pot-and-tongue drilling machine for drilling pot-and-tongue joints or fittings Technical data: - Table top: approx. 300 x 37 cm Laodpezrytrofx Alyoh - Weight: 180 kg

Condition: used, Year of construction: 2022, functionality: fully functional, Largest Flatbed Cutter SUMMA F3232, year 2022 for sale! Availability in January 2027. Materials that work with the F3232: Textiles & soft signage, Wide-format banners & mesh, Vinyl & protective films, Large-format corrugated & carton, Industrial composites & synthetics, Wood & MDF, Foam, rubber & technical materials. Working area: 327 × 320 cm Dimensions: 422 × 422 × 122 cm Material width: up to 332 cm Vacuum: 2 × 2.2 kW (50 Hz) Vacuum zones: 14 (2 rows × 7 columns) Speed: up to 1000 mm/s Acceleration: up to 1 G Power requirements: 3 × 400 V + N, 50 Hz, max 20 A INCLUDED (the machine comes with): ✓ Vacuum system ✓ Conveyor system ✓ Integrated Safety System ✓ Optical Camera System Laedpfxszuvzdj Alyeh ✓ ADC Tool Calibration (Right + Left) ✓ GoProduce ✓ GoProduce Pro Pack ✓ GoProduce Upgrade License Not included: Tangential module 2 pcs., Pneumatic Oscillating Tool - POT, Router module.

Condition: used, Year of construction: 2011, Perfect binding line Müller Martini Acoro A6 (3026-20) Year: 2011 Consisting of Gathering machine Müller Martini 1571 Lsdpfszzki Nex Alyeah Year: 2011 - 2016 Description: - Hand feeding station - Number of gathering stations: 18 - ASIR Automatic Signature Image Recognition: ASIR III - ASAC automatic self adjusting calliper - Pump(s) - Set up element - Reject gate for incomplete products: 3715 - Transfer into the binder Perfect binder Müller Martini Acoro A6 (3026-20) Year: 2011 Description: - Semi automatic setting - Colour monitor with touch screen - Book Data Center: BDC - Number of clamps: 20 - Main milling station - 1st spine preparation station - 2nd spine preparation station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: ICS-A C80 - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: MOD 40 Pot - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: CLS C18 - Gauzing station - Drum cover feeder - Scoring station: 4 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Müller Martini 3520 Year: 2011 - 2016 Description: - Transport system, length (approx): 40 mtr - Escape delivery Three knife trimmer Müller Martini Merit-S Year: 2004 Description: - Right hand infeed - Automatic hopper feeder for inline production - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 4-17 Book stacker Müller Martini UNO Year: 2011 Description: - Delivery to the right - Roller table delivery on the left Muller Martini Acoro A6: . Max. mechanical speed: 6.000 cycles/h Maximum size range: 430 x 320 x 60 mm Minimum size range: 140 x 100 x 2 mm Muller Martini Merit S: . Max. mechanical speed: up to 4.000 cycles/h Maximum size (uncutted): 384 x 320 mm Minimum size (uncutted): 140 x 103 mm Maximum size (cutted): 304 x 310 mm Minimum size (cutted): 136 x 100 mm Book thickness (min): 2 - 80 mm Muller Martini Uno: . Max. mechanical speed: up to 6.000 cycles/h Maximum size range: 500 x 320 x 80 mm Minimum size range: 140 x 100 x 2 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, total width: 2,900 mm, total height: 3,300 mm, Used machine CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 3 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool Laodpfxjif Ek Rs Alyoh • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: used, Year of construction: 2021, input voltage: 400 V, input current: 17 A, input frequency: 50 Hz, type of input current: three-phase, We are offering this used HOMAG EDGETEQ S-240 edge banding machine, manufactured in 2021. The delivery also includes a KOGI dust extraction unit in a two-bag configuration with 2.2 kW power and 1,650 Pa suction capacity. The machine is additionally equipped with a glue pot for special applications. A valuation report (PDF) is attached. Processing units Joint trimming / pre-milling unit Corner rounding unit Radius scraper Glue scraper Buffing / polishing unit PUR-capable (PUR-ready system) Technical data Required air pressure: 6.5 bar Total machine length: 4.8 m Current operating hours: 460 h Machine data Lajdpfsy Exwfex Alyjh Type: EDGETEQ S-240 PROFI KDF 230 Serial number: 0-261-73-7111 Year of manufacture: 2021 Wiring diagram: 0-261-73-7111 Supply voltage: 400Y/230 V Number of phases: 3 Frequency: 50 Hz Maximum current at full load: 17.3 A Fuse rating: 20 A Short-circuit current: 5 kA Control voltage: 24 V Protection class: NEMA 1 Largest motor current: 4.6 A Highest heating current consumption: 2.3 A Should you have any questions or require additional information, please do not hesitate to contact us by email or telephone.

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 109/1-606, functionality: fully functional, operating hours: 12,415 h, overall weight: 4,800 kg, No minimum price – guaranteed sale to the highest bidder! The machine has the following configuration: Number of units: 11 Pre-milling unit Gluing unit Pressure rollers: Type 1914 Cutting unit: Type KA701 Rough milling unit: Type 1828 Fine milling unit: Type FR701 Edge rounding unit: Type FF701 Radius drawing unit: Type ZK501 Straight edge drawing unit: Type 1856 Brushing unit: Type ES701 Gluing system Gluing system: Glue pot TECHNICAL DETAILS Edge band thickness: 3–20 mm Panel thickness: 8–60 mm Panel width: max. 65 mm Panel length: 180–250 mm Feed speed: 10–25 m/min Feed control: stepless MACHINE DETAILS Voltage: 400 V Current consumption: 45 A Dimensions & Weight Dimensions (L x W x H): 9,050 x 1,200 x 2,200 mm Weight: 4,800 kg Transport packages: 2 units Operating hours: 12,415 h Lsdez Ni Hnepfx Alyeah EQUIPMENT Tools for pre-milling unit available Tools for pressure rollers available Tools for cutting unit available Tools for rough milling unit available Tools for fine milling unit available Tools for edge rounding unit available Tools for radius drawing unit available Tools for straight edge drawing unit available Tools for brushing unit available CE marking Documentation

Year of construction: 2012, condition: used, COMPLETE CUP FILLING AND STERILISATION LINE – BABY FOOD 100 g / 200 g – 140 JARS/MIN Manufacturers: Filpack, Mondini, Guelt, Steriflow, Ariès, Jyga Process, Fanuc Type: Line for filling, sealing, sterilising and packaging cups Years: 2003–2016 (main part of the line: 2012–2013) Previous industry: Food and drink – baby food CARACTÉRISTIQUES GÉNÉRALES - Cadence : 140 pots/min - Formats : 100 g et 200 g - Pots en PP thermoformé, Ø 89,5 mm - Inertage sous vide ou azote à l'operculage - Pasteurisation / stérilisation en autoclaves rotatifs, avec contre-pression - Chargement et déchargement automatique des autoclaves (robots et navette) - Prélèvement automatique d'échantillons - Contrôle caméra par lecture de code-barres, et contrôle pondéral des cartons LINE-UP 1. Dépileur de pots – Mondini – 2012 2. 6-head brushless dosing unit – Filpack – No. 120111 – 10/2012 3. Vacuum/nitrogen-flushed sealing machine – Mondini – No. A/12/A-00464 – October 2012 4. Robot for loading trays and assembling autoclave loads – Guelt – 2013 5. Transfer shuttle for trains to autoclaves – Steriflow – 2012 Lajdpfx Ajz S N S Njlysh 6. 3 rotary autoclaves, each with 5 baskets – Steriflow – 2012 7. Robot for unloading trains and placing cups onto a conveyor belt – Guelt – 2013 8. Automatic sample collector – Guelt – 2013 9. Autoclave-exit lid applicator – Mondini – No. A/12/A-00464 – 2013 10. Fitting cardboard sleeves onto the jars – Mondini 11. Clustering (grouping of cups) – Ariès – No. 415 038A – 2012 12. Wrap-around cartoning machine – Jyga Process – No. D4303 – 2016 13. M-410iB/160 palletising robot (type A05B-1041-B201) – Fanuc – No. R03Z46888 – December 2003 DOSING – FILPACK - 6 dispensing heads, brushless motor - Products with or without chunks SEALING – MONDINI - Vacuum or nitrogen purging - 2 sealing tools (1 in use, 1 spare) - Lid: 65 mm print area STÉRILISATION – STERIFLOW - 3 rotary autoclaves - 5 baskets per autoclave, i.e. 4,320 jars per autoclave - 1 load = 5 baskets; 1 basket = 1 base tray, 11 trays and 1 lid - 1 tray = 144 jars; 1 stack = 6 trays - Tray stock: 24 base trays, 21 lids, 228 trays, i.e. 4 complete sets plus enough to start a 5th set ÉCHANTILLONNAGE – GUELT - 1 cup sampled for every 432 jars PACKAGING – ARIÈS / JYGA PROCESS / FANUC - Clustering into 4 formats: 1 × 1 jar, 1 × 2 jars, 1 × 3 jars, 2 layers × 2 jars - Camera monitoring via barcode scanning - Wrap-around cartoning with carton weighing and ejection of non-compliant cartons (example format: 6 × (4 × 100 g)) - Palletising according to pre-recorded palletising plans COMPATIBLE CUPS (MANUFACTURER’S DRAWINGS: RPC BEBO PLASTIK) 100 g jar – Item 1-89-40-M - External diameter: 89.5 mm - Internal diameter: 81.5 mm - Height: 40 mm - Capacity to the brim: 145 ml 200 g jar – Item 1-89-60-M - External diameter: 89.5 mm - Internal diameter: 81.5 mm - Height: 60 mm - Capacity to the brim: 230 ml DOCUMENTATION AVAILABLE - Line layout diagram - Technical drawings of the 100 g and 200 g jars - Cutting-out templates: lid, 4 × 100 g pack, 6 × (4 × 100 g) wrap

Year of construction: 2014, condition: good (used), Edge banding machine, edge bander, finishing unit, buffing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, sanding unit, edge banding unit -Handover: in its current condition as inspected -Accessories: see pictures -Manufacturer: SCM HOLZKRAFT, Edge banding machine type Minimax ME 20 -Minimum workpiece length: 180 mm Lodpfx Alez Rxb Rjysah -Minimum workpiece width: 65 mm -Workpiece thickness: approx. 12 to 50 mm -Edge thickness (rolled edges / strip edges): 0.4 to 2 mm -Feed rate: max. 5 m/min -Adhesive system: Hot melt adhesive granules in the glue pot below -Dimensions: 2000/720/H1235 mm -Weight: 300 kg

Condition: used, Year of construction: 1985, edge thickness 0,4 - 12 mm work piece thickness 10 - 55 mm work piece length min 160 mm work piece width min 65 mm feed speed 13 m/ min compressed air 7 bar Laodpsc Tmygofx Alyjh machine length 5420 mm weight 1950 kg glue pot with quick melt system glue application roller wit left and right turning edge magazine for PVC and strips motor height adjustment for pressure beam pneumatic pressure rollers for edge magazine control panel, rotatable all aggregates in-line controlled cutting milling combination with 2 aggregates, 1st aggregate straight, 2nd aggregate radius and phase milling tool draw blade buffing unit central lubrication for transport chain quick change system edge control system with error msg IR heater CE Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, total height: 2,100 mm, total length: 9,000 mm, total width: 1,050 mm, Year of manufacture: 2013 Weight: 6.000 kg - Details: - └ Description: Not working: Several loose sensors and the glue bin has been disassembled, machine has not yet been tested - Year: 2013 - Serial number: - Number of units [pcs]: 9 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - - Type/Brand: Nordson - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: No - └ 5th unit type: Rough milling unit - └ 6th unit type: Milling unit - └ 7th unit type: Fine milling unit - └ 8th unit type: Milling unit - └ 9th unit type: Milling unit - - Tools available: Yes - Glue system: Glue pot - Voltage [V]: 400 - Current consumption [A]: 69 - Fuse [A]: 80 - Transport dimensions: 9000mm x 1050mm x 2100mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Lajdpfsyrp Uajx Alysh Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, total height: 1,800 mm, total length: 4,800 mm, total width: 1,000 mm, Year of manufacture: 2017 Colour: Grey - Details: - └ Description: Machine is currently giving fault, error code empty machine - Year: 2017 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Number of units [pcs]: 9 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Corner rounding unit - - Tools available: Yes - └ 6th unit type: Radius scraping unit - - Tools available: Yes - └ 7th unit type: Corner rounding unit - - Tools available: Yes - └ 8th unit type: Flat scraping unit - - Tools available: Yes - └ 9th unit type: Brushing unit - - Tools available: Yes - Glue system: Glue pot - Voltage [V]: 400 - Current consumption [A]: 42 - Transport dimensions: 4800mm x 1000mm x 1800mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Lodpfxeyll Snj Alysah Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2023, condition: ready for operation (used), A Kohnle conveyor belt oven is available. Heating length: 1000mm, max. operating temperature: 1120°C, cooling length: 1850mm, throughput speed: 100mm-1000mm/min, channel height: 40mm, conveyor belt width: 110mm, machine dimensions X/Y/Z: approx. 5000mm/650mm/1350mm, control: Simatic HMI. Including ammonia splitter, data logger, nitrogen curtain at the front and rear and an additional pot conveyor. Documentation available. On-site inspection is possible. Expected to be available from March 2025. Lajdpfx Aovuafkslysh

Year of construction: 1986, condition: ready for operation (used), A Herdieckerhoff pot annealing furnace for the heat treatment of ring tubes is available. Maximum temperature: 1000°C, operating medium: inert gas, max. net charge weight: 1200kg, support height: 3850mm, furnace diameter: 2200mm, furnace height: 4650mm. Including 3x vacuum-tight and water-cooled circulators and 3x circulation impellers. Documentation available. On-site inspection is possible. Laodpfx Alovxvgrsyeh

Condition: ready for operation (used), Four identical dispensing cells are available, three machines are new and unused, one machine is used. Dispensing capacity: 0.02–0.5cm³/s at mixing ratio 1:1, mixing ratio: up to 1:100, shot volume: 0.005–5cm³, material supply: 20-oz cartridges (600ml), dispensing of small quantities from 5mg per dispensing point, processing of highly abrasive 2K materials. Process: dispensing, mixing, sealing, bonding, potting, protecting, programmable for dispensing dots and beads, suitable for processing abrasive two-component materials, with nozzle control. An on-site inspection is possible. Ledpfx Aoylzhrolyeah

Condition: ready for operation (used), Three identical base modules of the Rampf MC-EASY multifunction dispensing cell are available. Max. robot payload: 3kg, robot reach: approx. 600mm, manual component handling. Dispensing system for 1K and 2K materials, including gap filler and potting applications, material feed: from cartridges, hobbocks and 200l containers, dispensing control Beckhoff, material processing: cartridges, hobbocks, 200l containers, control: robot programming by Fruitcore with 3D real-time visualization of robot movement, with static 1K and 2K dispensing system. With automation module Digital Robot HORST600 and central operating software for all process participants, with 3x side panels and 1x door, comfort handle, profile half cylinder, base plate for the robot as well as consumables, operator console, light barrier, system light each individually positioned, mounted and wired, panels made of Makrolon. An on-site inspection is possible, not under power. Ledpfx Asylzicjlyeah

Condition: new, overall weight: 650 kg, Delta LC 400 Pot Grinding Machine Condition: New Technical Data: Max. grindable surface area: ø 400 mm Distance between column and grinding wheel axis: 315 mm Max. distance between magnetic table and grinding wheel: 205 mm Rapid feed per revolution of the handwheel: 2 mm Micrometric feed via small handgrip: 0.01 mm Dimensions of the grinding plate: ø 200 x 78 x 78 mm Lasdps Aax Eyefx Alyoh Dimensions of the grinding segments: 50 x 20 x 90 mm Motor power of the grinding wheel: (4 HP) - 3 kW Speed of the grinding wheel: (50 Hz) 2840 rpm Motor power of the electric pump: (0.08 HP) - 0.06 kW Weight of the machine: 650 kg Equipment: Low-voltage system (24 V) Cooling system with electric pump Wheel mounting flange and grinding wheel Grinding wheel guard - Table guard - Wedge Operating manual Two-color paint finish RAL 7037-7035, two-component multi-layer paint CE declaration of conformity Costs for delivery by freight forwarder, free curbside, see shopping cart or in the individual offer for request items.

Condition: used, EKU C9F-6GS 6-Burner Natural Gas Range Cooktop (Gas Burners) Number of cooking zones: 6 independent gas burners. Burner configuration: Divided into two power classes for flexible pot sizes: 3 x small/medium burners: 3.5 kW each (burner head diameter approx. 80 mm) 3 x large high-performance burners: 6.0 kW each (burner head diameter approx. 110/120 mm) Total cooktop power: 28.5 kW gas power. Features: Cast iron pot supports (sliding grates) and thermoelectric flame failure device on each burner for maximum operational safety. Oven (Undercounter) Type: Gas-powered convection oven (statically heated) with piezoelectric ignition. Oven power: approx. 8.0 kW to 9.0 kW burner power. Internal dimensions: Suitable for gastronorm racks and trays (GN 2/1). Temperature range: Adjustable from 100 °C to 300 °C via a safety gas thermostat. Connection values Total connection value (gas): approx. 36.5 kW to 37.5 kW (sum of cooktop and oven). Gas type: Standard setting for natural gas (20 mbar) (can be converted to liquefied gas/propane by changing the nozzles). Gas connection: R 1/2" or R 3/4" thread. Dimensions and weight Appliance external dimensions: approx. 1200 mm (width) x 900 mm (depth) x 850 mm (height) – suitable for the standardized 900 series of commercial kitchen modules. Material: Housing and cover made entirely of stainless chrome-nickel steel (CNS / stainless steel) Laodsztkf Iepfx Alyoh "We offer a suitable bank financing option for your project – all from one source." More items – new and used – can be found in our shop! International shipping costs on request!

Year of construction: 2026, operating hours: 5 h, condition: new, functionality: fully functional, overall weight: 500 kg, input voltage: 230 V, operating pressure: 6 bar, type of input current: AC, machine/vehicle number: 2K.MA.WPE.261, Like-new 2-component mixing and dispensing system Mur.Tech KMD-3000 V2 (year of manufacture 2026), directly from the manufacturer. Designed for highly viscous, abrasive, and reactive media such as epoxy resins, polyurethanes, silicones, adhesives, and highly filled potting compounds. Pulsation-free material feed thanks to an eccentric screw pump. This V2 version is additionally equipped with container heating (30–150 °C per container) and vacuum degassing of the materials – ideal for temperature- and bubble-sensitive applications. Highlights: - Modular design: complete material flow path from the pump head to the mixing gun can be replaced without tools (clamp technology) - Material temperature control throughout the entire material path - Material change in just a few minutes – almost no material loss - Stator change with only 3 screws – service without production downtime - Pinch valve and mixing tube change without tools in seconds - Lightweight mixing head made of carbon / aluminum / GRP – ergonomic - Swivel arm for fatigue-free handling (robot mount can be retrofitted) - Mobile thanks to the roller chassis Technical data: Manufacturer: Mur.Tech GmbH, Made in Austria Model: KMD-3000 V2, year of manufacture 2026 Pump: Eccentric screw, pulsation-free Mixing ratio: 100:10 – 100:100, stepless Stator materials selectable: NBR, FKM, EPDM, silicone, etc. Material containers: 2x 30l, capable of withstanding overpressure and vacuum, with electric inclined blade stirrer Container heating: heating jacket per container, temperature range 30–150 °C Material degassing: vacuum pump, both containers can be switched (individually with full performance or simultaneously with half performance) Mixer: static or dynamic possible Operation: gun or touch HMI Ljdpfsy Txfxsx Alyoah Control: Beckhoff IPC with 15.6" touch HMI Sensors: - Pressure monitoring in the container - Temperature measurement along the entire material path - Level monitoring of the material containers - Clogging monitoring - Condition monitoring of the pinch valves - Flow measurement and bubble detection Discharge methods: continuous, pulsed, by weight Connection: 400 V / 16 A, compressed air min. 6 bar Dimensions (W × D × H): 2,000 × 1,000 × 1,550 mm Data logging: Recording and saving the potting data in the Mur.Tech Cloud is possible upon request. The analysis over a longer period helps to improve efficiency and to detect maintenance cycles early. Connection to the company network is possible both wirelessly and via cable. Application areas: adhesive dispensing, electrical potting, specialty chemicals, series production, medical applications. Scope of delivery: system, operating manual, wiring diagrams. Commissioning and training optional. From the manufacturer: spare parts supply and service by the original team. Sold as seen, with exclusion of all warranties. Price: on request Location: 8811 Scheifling On-site inspection possible by appointment.

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, BIESSE Jade 340 Edgebanding Machine Pre-milling unit Glue application unit Trimming and corner rounding unit Ljdpfezcxyyox Alyjah Profile sanding unit Edge sanding unit Polishing units Spray valves, front and rear Additional replaceable glue pot Machine in continuous use. Year of manufacture: 10/2018.

Condition: as good as new (ex-display), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, workpiece height (max.): 60 mm, workpiece width (max.): 60 mm, workpiece length (max.): 140 mm, feed rate X-axis: 12 m/min, with approximately 4000 m of operating distance. Comes with a new machine warranty. The machine is sold without the depicted return system. The minimum workpiece width varies depending on the workpiece length, height, and surface quality: 70. Processing of roll material in thick PVC/ABS from 0.4–3.0 mm & strip material with a thickness of 0.4–12 mm. “e-motion” control system with an 18” touch-color screen with integrated maintenance software and available network connection. Stable machine stand made of steel. Extendable workpiece support facilitates working with large workpieces. Motor-controlled, positionable pressure bar with 2 offset arranged roller guides for even pressure distribution on the workpiece. Chain feed with rubberized support pads for optimal hold on the workpiece. Ball-bearing roller support plate with Ø 770 mm. Feed guide rail with sliding rollers for sensitive materials. Edge trimming unit with tool-controlled diamond cutters and 2 motors each with 1.5 kW, 12000 rpm. Chip removal is adjustable from 0–3 mm via motor-controlled positioning, including 2 diamond cutters Ø 80 mm, H 49 mm, Z2+2. Edge detection using an infrared sensor. Shear cutter for pre-capping thick PVC/ABS edge materials. Teflon-coated gluing unit with a capacity of 1.5 kg, application via a finely adjustable glue roller & quick-change system, as well as heating cartridge monitoring (~ 250 m/min per 1 kg of granules on a 19 mm board). Reversing function for the glue tank. Ideally suited for applying solid wood edge strips or laminate edges. Pneumatically tool-controlled gluing unit. Motor-controlled, positionable pressure unit with 1 large driven pressure roller and 2 conical follow-up rollers, pneumatically pre-tensioned. Cutting saw unit with 2 independent motors each with 0.50 kW, 12000 rpm, pneumatically swiveling 0–15°. Multi-function trimming unit for radius, flush and chamfer trimming of thin edges with 2 independent motors each with 0.75 kW, 12000 rpm, motor-controlled edge adjustment & pneumatic retraction function from the control panel. Corner processing unit for soft- and post-forming workpieces for processing the end edges with 0.4–3.0 mm edge thickness & 10–60 mm workpiece height. 2-axis motor-controlled, positionable radius drawing blade unit including pneumatic retraction function. Polishing unit with 2 motors. Special equipment 020 Surface drawing blade, pneumatically tool-controlled 032 Spray device for cleaning agents before the polishing unit Laedpfx Aezcymhjlyeh 042 Spray device for release agents on the machine infeed side (PUR adhesive) 046 Extended feed guide rail (+400 mm) 047 Edge trimming cutter with interchangeable inserts, 64 mm height instead of 49 mm, 2 motors each with 2.2 kW instead of 1.5 kW 051 Multi-function trimming unit with vertical multiple rollers for processing workpieces with pot-band holes 053 Spraying of lubricant Pneumatic-mechanical insertion lock to prevent premature feeding of the machine 059 Automatic lubrication for the chain conveyor 064 Pneumatic-mechanical insertion lock 067 Reversing function for the glue tank. Ideally suited for applying solid wood edge strips or laminate edges. 050A Additional interchangeable glue tank, counter-rotating 090 “classic” multi-function & radius drawing blade unit e-motion with radius 1+2 mm 071 Motor-controlled adjustment and positioning for corner rounding cutters 085 Preparation for u-motion professional 033 LED lighting 505 Exhaust distributor professional Includes delivery & inst

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, Equipment: CE marking, IMA BIMA 410 V CNC WORKING CENTRE FOR BORING + ROUTING + EDGE BANDING • Industrial machine with heavy-duty structure • Working area: X:4000 mm Y:1200 mm Z: 100 mm • Travel speed: X:100 m/min Y:80 m/min Z: 25 m/min • 2 Working areas • 8 movable work tables to support the panels. SCHMALZ system • 23 SCHMALZ suction cups with vacuum system for the locking of the working piece • 4 loading device through pneumatic bars assembled on the work tables that lift the pieces • 1 SIEMENS vacuum pump ROUTING UNIT: • 10 HP. Refrigerated router head • Automatic change of the tool • Tool holders: HSK F-63 • C AXIS that allows to turn and 360° angle drive heads with rotation regulation in automatic by numerical control • 0 to 20.000 rpm • Tool magazine 12 positions MULTI-BORING UNIT: • 7 independent spindles for vertical boring in X direction • 5 independent spindles for vertical boring in Y direction • High revolution speed: 9.000 rpm EDGE BANDING UNIT: • Automatic device to apply the edge into straight profiles of shaped panels • Applicable banding material in coils: thin edge and PVC up to 3 mm Laodpfozc E A Iox Alyoh • Independent unit to edge band shaped panels. It's installed on the main frame of the machine - hot-melt glue pot and premelter - spreading roller to regulate the quantity of apllied glue - edge pression roller • Lamp zone to pre-heat the side of the panel • Multiple magazine for edge coils with 2 positions, to automatically change the edge type • Top and bottom edge trimming head-unit • Top and bottom edge scraping head-unit CONTROL OF THE MACHINE: • IMATRONIC • Software IMAWOP • Command board installed on a separated electrical cabinet to control the machine PROTECTION ENCLOSURE OF THE WORKING UNITS PROTECTION FENCES SECURITY CARPETS SECURITY NORME CE MARK

Condition: new, Year of construction: 2023, functionality: fully functional, Machine is new, packed and ready for transport in Sellers warehouse in Croatia ! OLIMPIC k 560 composition "T-ER2" (40) - European safety regulations (CE norms) - ”StarTouch" electronic control with 12" display touchscreen n° 100 working programs which can be customized - "RT-V1" pre-milling unit - "VC-VM" gluing unit (Installed power: 3 Kw, Heating time: 12 min , Glue pot capacity: 1,5 kg) - "SGP" - Smart Gluing Pot - "K/SEL" end cutting unit (Motors power: 0,35 kW, Speed of tools: 12.000 rpm) - "R-K" trimming unit (Motor power: 0 ,55 kW, Speed of cutters: 12.000 rpm, Exceeding material to the panel thickness: 2+2 mm, Min. panel thickness with radius: 12 mm, Vertical/front copying devices: disc/pad, Tool radius: 2 mm) - "ROUND X" rounding unit (Motor power: 0,35 kW, Speed of cutters: 12.000 rpm, Edge thickness: 0,4 3 mm, Panel thickness with a straight angle: 10 50 mm, Panel thickness with a shaped angle according to the profile): 10 30/40 mm, Tool radius: 2 mm) - "RAS-HP MULTIEDGE 2R" edge scraping unit - "Nesting" copying device TECHNICAL DATA Laedpfx Aeza U H Rjlyeh Variable track feed speed m/min 12 -18 Panel thickness mm 8-60 Thickness of edges in strips mm 0,4-6 Thickness of rolled edges mm 0,4-3 Max. section of rolled edges mm² 135 Distance between two successive panels mm 600 Minimum panel length (100 mm min. width) mm 140 Min. length of edge in rolls mm 180 Min. length of edge in strips mm 220 Min. panel width (210 mm min. length) mm 95 Opening for panel support roller mm 500 Worktable height mm 900 MACHINE DIMENSIONS (transport): lenght: 5.005 mm wide: 1.000 mm height: 1.950 mm

Year of construction: 2024, operating hours: 100 h, condition: refurbished (used), functionality: fully functional, overall weight: 500 kg, input voltage: 230 V, operating pressure: 6 bar, type of input current: AC, machine/vehicle number: 2K.MA.WPE.241, Used Mur.Tech KMD-3000 V1 2-component mixing and dispensing system (year of manufacture 2024), directly from the manufacturer. Designed for highly viscous, abrasive, and reactive media such as epoxy resins, polyurethanes, silicones, adhesives, and highly filled encapsulating compounds. Pulsation-free material transfer thanks to an eccentric screw pump. Before delivery, we, as the original manufacturer, carry out a complete factory reconditioning of all components in contact with the material: the pump, material containers, mixing head, hoses, and valves are either rebuilt or replaced with new ones. This means that the wear condition of the media-carrying parts corresponds to that of a new system. Frame and sheet metal parts show signs of use. Highlights: - Factory reconditioning of all components in contact with the material before delivery - Modular design: the entire conveying path from the pump head to the mixing gun can be replaced without tools (clamp technology) - Material change in just a few minutes – virtually no material loss - Stator change with only 3 screws – service without production downtime - Mixing tube change without tools in seconds - Lightweight and ergonomic mixing head made of carbon / aluminum / GRP Laedpezabnzofx Alyeh - Swivel arm for fatigue-free operation - Mobile thanks to roller chassis Technical data: Manufacturer: Mur.Tech GmbH, Made in Austria Model: KMD-3000 V1, year of manufacture 2024 Pump: Eccentric screw, pulsation-free Mixing ratio: 100:10 – 100:100, infinitely variable Stator materials selectable: NBR, FKM, EPDM, silicone, etc. Material containers: 2x 30l, with pneumatic propeller stirrer Mixer: Static or dynamic possible Operation: Gun or touch HMI Control: B&R PLC with B&R touch panel Sensors: - Pressure monitoring in the container - Temperature measurement along the entire material path - Blockage monitoring - Flow measurement and bubble detection Discharge types: continuous, pulsed, by weight Connection: 230V 50Hz, compressed air min. 6 bar Dimensions (W × D × H): 2,000 × 1,000 × 1,550 mm Note on the images: The images show the system in its current condition before factory reconditioning. The components in contact with the material will be renewed before delivery. Application areas: Adhesive dispensing, electrical potting, specialty chemicals, series production, medical applications. Scope of supply: System, operating manual, wiring diagrams. Commissioning and training optional. From the manufacturer: Spare parts supply and service by the original team. Sold as seen, excluding any warranty. Price: on request Location: 8811 Scheifling On-site inspection possible by appointment.