Used Power Unit for sale (61,067)

Condition: used, Pneumatic punching unit TÜNKERS, pneumatic power cylinder Pneumatic punching bracket, punching frame, punching unit, punching frame Year of manufacture: 2019 Model No.: 141-1040F Punching frame No.: B-13-26/100 Pressing force: 4 tons (40 kN at 8 bar) Air connection: max. 8 bar Kodpoxf Uqxofx Adwell Throat depth: 100 mm Frame width: 60 mm Hole diameter: Ø 2-13 mm Hole diameter (installed punch): Ø 4 mm Die diameter (outer): Ø 22 mm - Stripper made of Vulkollan polyurethane elastomer Dimensions L x W x H: 280 x 110 x 480 mm Weight: 36 kg Very good condition

Condition: like new (used), Year of construction: 2019, operating hours: 900 h, functionality: fully functional, As-new AL-KO POWER UNIT 300P dust extraction filter, 2019 Acquired just before the pandemic as a dust extraction system for a CNC machine. Very little usage, under 900 operating hours. The Biesse Rover milling machine is also for sale in a separate listing. Buyer is responsible for dismantling and removal of the unit. The AL-KO Power Unit is a highly efficient, enclosed filter system equipped with a clean-air side fan. The system complies with H3 filtration class requirements: return air dust concentration is below 0.1 mg/m³. Supplied fully assembled for easy and fast installation and commissioning. Dust is collected into containers beneath the filter, enabling simple removal of shavings from under the machine. The filtered air can be returned to the workshop or discharged outside via a dedicated duct system. The enclosed design ensures low operating noise and a dust-free environment around the unit. The dust concentration of the return air is just one tenth compared to conventional bag-type extractors! Filter cleaning is performed automatically with compressed air or mechanically via shaker devices. Automatic cleaning is controlled by a vacuum sensor. Post-cleaning is performed when the unit is switched off. The filter media is Class C and features antistatic properties. Filter bag replacement is quick and easy via the light-opening roof panel on the filter. By positioning the extraction fan on the clean-air side, the system offers advantages over conventional units in terms of fire safety, noise level, and maintenance-free operation. Mechanical pre-separation of chips reduces wear on the filter media and lowers the filter load, ensuring maximum filtration efficiency. The Power Unit series achieves noise levels as low as 69 dB! In addition to wood, AL-KO dust extraction systems are also suitable for other machinable materials such as plastics, stone, cement, gypsum, and aluminium. POWER UNIT 300P Kodpfxsxz Rg Is Adwoll - Extraction port D 300 mm, max. air flow 6,000 m³/h - Motor power 7.5 kW – filter area 30 m², collection containers 3x250 l - Includes compressed air cleaning - Includes automatic shutoff system

Condition: used, Hydraulic power unit with BOSCH - REXROTH hydraulic pump Hydraulic unit Type: U 120 V4 0.18 Kledpfxsxrgu Ao Adwjl No.: 983791 Year of manufacture: approx. 1975 Operating pressure: max. 40 bar Flow rate: 4 liters/min. Motor power: 0.18 kW Tank capacity: approx. 8 liters Power supply: 400 Volts, 50 Hz - Gear pump - Pressure regulator - Return filter Required installation space L x W x H: 350 x 300 x 420 mm Net weight: 20 kg Good condition

Condition: used, functionality: fully functional, fuel type: diesel, empty load weight: 3,970 kg, overall weight: 3,970 kg, axle configuration: 2 axles, color: yellow, driver cabin: day cab, gearing type: automatic, suspension: steel, number of seats: 2, Year of construction: 2005, operating hours: 25,442 h, Equipment: additional headlights, power assisted steering, trailer coupling, Ground Power Unit: + Self-propelled (via electric motor) + Multicar M26 chassis + Year of manufacture: 2005 + 25,443 operating hours + 2-seater + Webasto auxiliary heater + Generator with 28V DC and 115V 400Hz – each with cable + Tow hitch + Weight: 3,970kg + 492cm x 166cm x 220cm (LxWxH) Receive all newly listed vehicles via email – subscribe to our NEWSLETTER! Klsdpfx Adsxy H Aiswjl Errors and omissions excepted, subject to prior sale!

Condition: used, Hydraulic Power Unit ACME TYPE ZPR 6 Ref. No.: 962116 Year of manufacture: approx. 1972 Kjdpfxexf Uz De Adwoll Operating pressure: max 40 bar Flow rate: 10 litres/min. Tank capacity: 15 litres - In-line filter Motor power: 0.37 kW Power supply: 380 Volt, 50 Hz Installation dimensions (L x W x H): 500 x 270 x 500 mm Net weight: approx. 80 kg Test run with pressure test

Condition: used, HERION hydraulic power unit with hydraulic pump Hydraulic power unit Unit No.: 6352160 Year of manufacture: 1976 Operating pressure: 115 bar Flow rate: 4.5 litres/min. Klsdpfsxf Uzqex Adwol Hydraulic pressure (pump): max. 160 bar Motor power: 1.5 kW Tank capacity: 40 litres - 1 return filter - 1 pressure gauge 250 bar - 1 4/3-way valve HERION, type S10 B51 G013611 (24 Volt DC, 35 Watt) Space requirement (L x W x H): 600 x 400 x 600 mm Weight: 70 kg Very good condition Sold without oil

Condition: used, Hydraulic Power Unit with Hydraulic Pump FRIEDRICH - REXROTH - HYDRONORMA Hydraulic unit type HY01 - PV2V3-30 / 12R1MC 63 A1 Year of manufacture: 1979 Pump operating pressure: 80 bar Pump flow rate: 14 liters/min (unloaded) Motor power: 1.5 kW Tank capacity: approx. 30 liters Power supply: 400 volts, 50 Hz - Silent power unit, space-saving design - Hydraulic pump BOSCH REXROTH type PV2V3-30 / 12R1MC 63 A1 Kedpfsxf Uzkjx Adwjll - Solenoid valve BOSCH REXROTH 081WV06P1N112 - Return line hydraulic filter - Pressure gauge - Hydraulic tank with top lid for easy access - Electric switch for 2-way changeover Space required (L x W x H): 415 x 410 x 850 mm Net weight: 85 kg Good condition

Condition: used, Hydraulic Power Unit, Hydro Unit BOSCH REXROTH Type Solo FD 101 Hydraulic Power Unit Year of manufacture: approx. 1980 Operating pressure: max. 115 bar Flow rate: 12 litres/min. Tank capacity: approx. 80 litres (with central oil sight glass) Motor power: 3 kW Power supply: 400 Volt, 50 Hz - BOSCH REXROTH hydraulic pump, type Solo FD 101 - 1 piece 5/3 way directional control valve, 24 Volt - 1 piece return filter - 1 piece pressure regulator - Tank dimensions L/W/H: 650 x 400 x 470 mm - Connection fittings for hydraulic pipes 12L Required space L x W x H: 700 x 430 x 1300 mm Net weight: 130 kg in good condition Kodpfx Asxf Uzdedwoll

Condition: used, Hydraulic power unit with HILMA hydraulic pump Hydraulic power pack, hydraulic unit Type: 5034-4302 Operating pressure: max. 500 bar Flow rate: 1.2 litres/min. Motor power: 0.75 kW Tank capacity: approx. 4.5 litres Power supply: 400 Volt, 50 Hz Klsdpfxoxf Uyyo Adwsl - HAWE piston pump, type R 1.5 - 1 piece HAWE 2/2-way valve, type WGR 2-1 (230 V DC) - Pressure regulator Required space (L x W x H): 280 x 260 x 480 mm Net weight: 25 kg Good condition

Condition: used, Hydraulic unit, Hydraulic Power Unit VICKERS Order No.: 62357390 Year of manufacture: approx. 1985 Operating pressure main pump: 60 bar Flow rate main pump: 16 liters/min. Operating pressure cooling circulation pump: 5 bar Flow rate cooling circulation pump: 5 liters/min. Tank capacity: 160 liters Motor power: 2.2 kW Electrical connection: 400 Volt, 50 Hz - 2 hydraulic pumps (1x main pump, 1x cooling circulation pump) - 1 BOSCH accumulator, 2 liters - Pressure relief valve - Hydraulic filter - Cleaning cover Required space L x W x H: 1000 x 620 x 1100 mm Own weight: approx. 150 kg In good condition Kjdpfsxf Uyasx Adwoll

Condition: used, Hydraulic Power Unit, SPERRY VICKERS Hydraulic Power Pack Order No. 624186 Year of manufacture: approx. 1985 Operating pressure: 60 bar Flow rate: 6.5 liters/min Tank capacity: approx. 30 liters Motor power: 1.5 kW Kedpfjxf Ux Njx Adwjll Power supply: 400 Volt, 50 Hz - SPERRY VICKERS hydraulic pump, type GPA1-4-E - 2 solenoid operated directional valves SPERRY VICKERS, type DG4V-3-2C-UH-10-S300 Dimensions (L x W x H): 500 x 300 x 730 mm Net weight: approx. 70 kg Good condition

Condition: good (used), Hydraulic power unit, Used machine Overall dimensions: 750 x 500 x 1210 mm Weight: 314 kg Electrical data: 400V; 7.5 kW; 14.8 A Maximum pressure: 160 bar Klsdpfouzigbox Adwsl

Condition: used, REXROTH HYDRAULIC PUMPS Klodpowxl Siofx Adwel TYPE: A4VSO250 LR26/10 MADE IN GERMANY QUANTITY: 3 PIECES PRICE PER PIECE: 2,650 EURO EX WORKS IN EXCELLENT CONDITION, READY FOR LOADING

Condition: used, Hydraulic Power Unit ORSTA Year of manufacture: 1987 With 3 motors and various hydraulic circuits Tank capacity: 160 litres Pump power: 5.5 kW - 2 units of pressure accumulator, 160 bar, 25 litres each - 1 electric pressure switch - 7 units of 4/2-way hydraulic valve with solenoid coil - 5 units of 4/2-way hydraulic valve with solenoid coils - Oil cooling with water cooler and electric pump for internal water circuit Dimensions (L x W x H): 1300 x 750 x 1700 mm Kljdpfexcitpjx Adwsl Weight: approx. 400 kg Offered without oil content

Condition: used, Hydraulic unit DAIKIN KOGIO (Japan) Type Y475109 / TF 71 Operating pressure: 70 bar Klsdpfxoxcitio Adwsl Flow rate: 12 litres/min. Tank capacity: approx. 70 litres Motor power: 1.5 kW Electrical connection: 380 Volt, 50 Hz - 1 x pressure control valve - 1 x solenoid valve with 2 coils, 24 Volt - Pressure oil filter Required space: Length: 660 mm, Width: 500 mm, Height: 710 mm Net weight: approx. 120 kg

Condition: used, Power source for orbital welding machine MESSER GRIESHEIM - POLYSOUDE PS204 Water cooling unit for orbital welding machine MESSER GRIESHEIM - POLYSOUDE RC200 Welding power source, inverter welding machine POLYSOUDE PS 204 + RC 200 Year of manufacture: 1997 Power source serial no.: 9885186 Cooling unit serial no.: 97861? Output: 200 amps = 20% duty cycle Kledpjt Awm Defx Adwol 90 amps = 100% duty cycle Power supply: 230 volts, 50 Hz, Schuko plug - Remote control cable type BP 1436 with 7.5 m connection cable - Adjustable output from 1 to 200 amps - DC only - HF ignition - Cooling water unit for torch cooling - 44,895 operating hours (read) - Operating and maintenance manual included Space requirements welding machine (L x W x H): 550 x 360 x 500 mm Space requirements cooling unit (L x W x H): 550 x 360 x 550 mm Weight welding machine: 45 kg Weight cooling unit: 25 kg Good condition Sold without accessories The price refers to a set consisting of 1x power source and 1x water cooler.

Condition: used, Hydraulic unit, whisper unit BOSCH REXROTH Hydraulic unit Type UPE 5- /1.50V7/06-10A-H-1-S090+04100891 Factory no. R904100893 / 480933 10 Year of manufacture approx. 2010 Pressure output: 55 bar Delivery rate: 13 L/min. Tank capacity: approx. 20 liters Engine power: 1.5 kW Speed: 1440 rpm. Mains connection: 400 volts, 50 Hz - Unit was used for an operating pressure of approx. 80 bar - 1 hydraulic pump, vane pump BOSCH REXROTH, type PV7-11/06-10RA0MA0-10, pressure max. 100 bar - 1 air-oil cooler, fan cooling by electric motor from the hydraulic pump - Hydraulic block BOSCH REXROTH, type UPES-11/ ABZSS6-C-140E-S30-S13 Ksdpfxov Ev Dqj Adwell - 2 hydraulic pressure accumulators - 1 replaceable filter cartridge - 1 pressure sensor IFM, type TR7 430 - 1 oil sight glass - Hydraulic connections 2x 18L - Sold without oil content Space requirement L x W x H: 700 x 450 x 850 mm Weight: 105 kg very good condition

Condition: used, Year of construction: 2024, The control of the dust extraction system is switched on and off via 2 sensors. Suitable for installation on an existing transport system Sword brush Ksdpfxoun N Aue Adwoll Micro-moistening of the brush elements by means of an antistatic moistening nozzle from Riepe. Moisturisation can be finely dosed via this nozzle. Cleaning the product surface using Sword Brush technology The dust particles are picked up by the brushes and removed by the suction system. A rotating squeegee and compressed air nozzles ensure constant cleaning of the brush systems. Power channel The power channel contains 14 rotating double power compressed air nozzles, which remove particles and dust from the material surface and from recesses. The suction system removes the loosened particles. Technical data: Power: 0.5 kW Self-cleaning system via the rotating brush Dust extraction: 2 x D120 mm at the top + 2 x D80 mm on the side. Motorised height adjustment Material of the panels to be cleaned: MDF, chipboard with melamine Workpiece length: min. 400 mm Panel width: max. 1,350 mm Workpiece height: max. 80 mm Feed speed: max. 35 m/min Removal standard: workpiece surface dust-free Important: Glue residues are not removed. Size of the machine: Width: 2,280 mm Installation length: 500mm

Condition: good (used), TABLE PRESS WITH POWER UNIT Kedpfx Aek Adfnedwjll

Condition: used, Year of construction: 2005, Power supply Delta Elektronika SM 300-10D 300V 10A Series SM3000 3000W Kodpfotn Nnxsx Adwsll

Condition: excellent (used), Year of construction: 2017, Motor from Lammers Antriebstechnik 11kW, 1470/min Valves: HYDAC Kledpfx Aderm Nhlewsl Pump 30 cm³/rev Tank 250 liters Pressure 100 bar max Oil HLP 46

Condition: new, Year of construction: 2025, Extraction nozzle 355 mm Nominal motor rating 15.0 kW / 3 Ph Voltage 400 V / 50 Hz Max. flow rate ca. 10,000 m3/h Nominal flow rate* 7,127 m3/h Vacuum at nominal flow rate 3,000 Pa Filter area 73 m2 Pre-separator Integrated Extinguishing device Integrated Kljdpfx Aofzbqyjdwel Swarf collection capacity (net / gross) 3 x 165 L / 3 x 250 L Sound pressure level 73 dB(A) Dimensions (L / W / H) in mm 3,130 x 1,058 x 2,351 Weight net 1,040 kg

Condition: new, Year of construction: 2025, The POWER UNIT 160 P is an approved clean-air dust extractor in a self-supporting sheet metal construction made from coloured powdered sheet steel. The device conforms to the most recent regulations, is certified with the BG–GS test seal, in accordance with GS-HO-07 (with endorsement for residual dust concentration test seal H3) and, thus, it can be directly installed in the workroom without additional fire or explosion protection measures. Therefore, it provides an ideal production condition with healthy air at the workplace. It is also suitable for use in workshops with a utilization factor of 2-4 machines (dependent on the required volume-flow), as well as to supplement a stationary plant as local extraction for universal application with different materials. The small external dimensions also allow the dust extractor to be installed in confined workshops. Technical data POWER UNIT 160 P : • Intake connection 160 mm • Motor rating 2.2 kW; 3 Ph; 400 V/ 50 Hz • Max. volume-flow 2,000 m³/h • Volume-flow at the connection at 20/ 22 m/s 1,448/ 1,592 m³/h • Vacuum at the connection at 20/ 22 m/s 2,503/ 2,399 Pa • Filter area 9.1 m² (23 x Ø 125 mm, 1000 mm long) • Filter cleaning Compressed air cleaning • Filter material Cat. M, el, white washable • Impact on filter 160 m³/m²/h • Max. noise level 71 dB(A) • Residual dust content H3 / (ᐸ0,1 mg/m³) • Swarf collection volume ca. 165 (241) liter • Basic controls Micro SPS-Logo Siemens without display • Electrical connections 5 m connection cable with CEE plug 5 poles, 16 A, with phase inverter • Compressed air supply ½” standard plug compressed air consumption 108 Std.l/ 6 bear • Volume flow monitoring differential pressure cell with warning lamp on control box • Dimensions (L x W x H) 1,688 x 830 x 2,050 mm • Undercarriage 4 plastic castors 125 mm, two of them steerable, one with locking • Weight 340 kg • Design / Control side choice right / left • Finishing RAL 7001 (silver grey) and Klsdpfxjfydzbj Adwol RAL 7035 (light grey)

Condition: used, Hydr. scissor lift table WEIDMANN type E5/13-1 Serial no. 30403339 Year of construction 1982 / 2007 Load capacity 500 kg Platform size 2000 x 1200 mm Lift max. 1280 mm Kodehlnznepfx Adwoll Overall height - table bottom 290 mm Overall height - table top max. 1570 mm Table height with safety support 1430 mm Lifting speed 1280 mm in 25 sec. Lowering speed 1280 mm in approx. 0 to 15 sec. Hydraulic operating pressure approx. 130 bar Motor power 1.5 kW Mains connection 400 Volt, 50 Hz. - Rotary switch on the hydraulic unit for up and down - Infinitely adjustable lowering speed via throttle valve - 1 lifting cylinder - Hydraulic unit built in 2007 with tank opposite - Safety protection frame with limit switches dead weight 660 kg good condition

Condition: used, Hydr. flat form scissor lift table FLEXLIFT FLUNDER type 1500 / 100 (without hydraulic unit) Year of manufacture 1991 Nominal lifting capacity 1500 kg Lifting capacity (practically tested) 1000 kg (at approx. 350 bar) platform size 2100 x 1400 mm stroke max. 930 mm Overall height - bottom 100 mm (with mounting frame) Kodpfx Ael Nbqcodwjll Overall height - top 1030 mm Hydr. operating pressure 350 bar = lifting force 1000 kg Motor power of hydraulics 1,5 kW mains connection 400 Volt, 50 Hz - mechanical-hydraulic safety limit switches stop the lowering process when the safety bar is actuated - without hydraulic power unit - without electric control length of installation frame 2270 mm width of mounting frame 1580 mm height of mounting frame = height at bottom 100 mm dead weight of lifting table 500 kg good condition