Used Precision Drilling for sale (10,517)

Condition: used, Year of construction: 2022, drilling capacity steel/cast iron 50/60 mm throat max. 1600 mm Hnedpfsyuy Szjx Agwoi workpiece height max. 1300 mm throat min. 300 mm spindle taper: MK5 drilling depth in one stroke 300 mm vertical adjustment of arm 800 mm base plate surface area 1600 x 800 mm spindle turning speed range 125- 1250 U/min total power requirement 3,5 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 2,4 x 1,2 x 2,7 m feed per revolution 0,025- 1,38 mm/r Without table.

Condition: good (used), Nagel Citoborma 480AB Paper Drill This machine is in very good condition. It has four drilling heads. Technical specifications: Drill bit distance: 45-285 mm Drill diameter: 2-20 mm Stack height: 60 mm Hnedpfx Ageynfvfowsi Weight: 275 kg Automatic drilling cycle, controlled by a foot pedal. Sturdy construction on a pedestal. The drill table is adjustable in all planes. This is one of the newest Citoborma models. Includes operating tools, instructions, and a new cutting stick and drill bits.

Condition: good (used), Uchida GA-4W Four-Head Paper Drill This machine is in very good condition and ready for operation. Made in Japan. The machine has a number of features that make it easy to use, including: – four drilling heads with independently adjustable positions Hjdpfx Agoynfu Iewoni – a sliding programming bar – spacers for easy setup for drilling holes Technical specifications: Drill diameter: 2-10 mm, Stack height: 50 mm, Head spacing: 65 mm – 330 mm Weight: 370 kg 380V power supply Automatic drilling cycle, controlled by a foot pedal. Sturdy construction on a pedestal. Waste discharge is directed outwards. Front and side margins. Includes operating tools. New cutting stick, drill bits, and sharpener.

Condition: good (used), Year of construction: 1990, Gebruikte radiale boormachine van MAS Type VO 80 Hedpfx Ageyu Su Uowjni Boorcapaciteit 80 mm

Condition: excellent (used), Year of construction: 2014, Axle 920 mm x-axis 3000 mm Material thickness Z 12 mm - 30 mm Feed speed 20 m/min. A - axis 360 degrees Minimum dimension: Plate: x = 300 mm Hnjdpefmdcqefx Agwei Y = 120 mm z = 12 mm The machine is equipped with a 4 position drill chuck and a saw blade. Maximum and minimum hole diameters that can be drilled: 3 - 35 mm The saw blade runs in X - direction Max. bottom depth with saw blade: 10 mm Motor 0,75 PS , 400 Volt Required extraction capacity: 2300 m3/h Location: comes to warehouse 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 on Sennebogen SR25 with ABI MDBA 3500 Soil Improvement Rig | Used Drill | 5834 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 220000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Hodex Uyzqopfx Agwsni The machine is used for concrete pile drilling, soil improvement, and vibration tamping. The carrier vehicle is a Sennebogen SR25BT (built in 2008) with a Delmag RH18 drilling attachment (built in 2009). The drill table lift is 12.50m, total height is 19.91m. The outreach is 3.165 - 4.00m. It includes a winch for the feed with freewheel, auxiliary winch, and rear platform. The drill table is an SHT25, and the KDK rotary drilling head BT180-2 is not included. The machine is purely a soil improvement device, equipped with a MBDA 3500 ABI drill gearbox. It has a single auger. No Kelly bar is included. It features mast support cylinders and alignment automation. The hydraulic telescopic undercarriage has a width that adjusts from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at 3,304 operating hours. Drills and drill accessories are available separately. Also available is a mobile mixing plant, manufactured by MAT, which includes a mixing container (throughput capacity of 20m3/h), a conveyor screw, a mixing container (capacity 4,000l), and a plunger pump with remote control. The machine’s condition corresponds to its operating hours. During the inspection in 2023, the machine was running and functioning without any issues. As of October 2024, wear and tear have occurred on the valves, controls, and hydraulic hoses. It is not possible to operate the machine with two attachments simultaneously. The machine shows wear on bolts, bushings, and general usage marks (dents, scratches, etc.) consistent with its age, operating hours, and usage. The machine was not tested under load. It has been used with 55 and 80 paddles. After service and maintenance of the wear and tear, the machine will be ready for operation. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33244 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Catalogue number 7787 TECHNICAL SPECIFICATIONS - Tool diameter: 14mm - Maximum drilling depth: 170mm - Maximum milling length: 180mm - Adjustment of drilling apparatus front/rear - Table adjustment up/down and sideways - Table swivel angle: +/-20˚ Hsdpfjxt It Aox Agweni - Working table dimensions: 620x280mm - Material clamping - Motor power: 1.5kW - Brake - Dimensions (L/W/H): 1070x660x1250mm - Weight: 300kg ADVANTAGES – Polish production – Very good condition – Used drilling machine Net price: 5900 PLN Net price: 1400 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the case of major exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalogue number 7689 TECHNICAL SPECIFICATIONS - Tool diameter: 16mm - Maximum drilling depth: 160mm - Maximum milling length: 160mm - Adjustment of drilling unit: forward/backward, up/down and sideways - Working table dimensions: 600x320mm - Material clamping system - Motor power: 2.2kW - Dimensions (L/W/H): 950x740x1330mm - Weight: 283kg Hnodpfxeyarazo Agwsi ADVANTAGES – Made in Poland – Very good condition – Used drilling machine Net price: 6300 PLN Net price: 1500 EUR (depending on the exchange rate of 4.2 EUR) (Prices may change with significant exchange rate fluctuations)

Condition: new, Alzmetall Alzstar 40/S pillar drilling machine Manufacturer: Alzmetall Type: Alzstar 40/S Condition: new Drilling capacity steel E335 (St 60) 40 mm Short spindle MK 3 Spindle stroke 120 mm Thrust 293 mm Hedpfsyucc Asx Agwoni Column diameter 115 mm Machine table, usable support 514 x 360 mm T-slots, number x width x distance 2 x 14 x 224 mm Distance spindle-table min./max. 117/701 mm Feed manual Machine height without options approx. 1840 mm Net weight approx. 270 kg Spindle speed rpm 160-2250

Condition: new, Alzmetall Alzstar 30/s pillar drilling machine Manufacturer: Alzmetall Hnedpfx Asyuccpjgwsi Type: Alzstar 30/S Condition: new Drilling capacity steel E335 (St 60) 30 mm Thread cutting Steel E335 (St 60) M 16 Cast EN-GJL-200 (GG20) M 20 Short spindle MK 3 Spindle stroke 140 mm Thrust 293 mm Column diameter 115 mm Machine table, usable support 514 x 360 mm T-slots, number x width x distance 2 x 14 x 224 mm Distance spindle-table min./max. 132/724 mm Feed manual Machine height without options approx. 1770 mm Net weight approx. 260 kg Drive continuously variable Motor 750 / 1500 rpm 750 / 1500 rpm Power 1.0 / 1.6 kW 1.0 / 1.6 kW Spindle speed rpm 225-4300

Condition: like new (used), Donau Donauflex 135 High-Speed Radial Drilling Machine Manufacturer: Donau Model: Donauflex 135 Year of manufacture: 2020 Condition: Very good, used but like new Available immediately from stock. Hnedpfxsyucahs Agwji

Condition: new, Year of construction: 2024, neu 2024 3983 prompt, Zwischenverkauf v Spanien 7400 € 142.82 € 1 1 32 mm MK 3 250 mm 65 - 125 - 185 - 365 - 54 U/min 1,8 / 2,6 kW M24 600 mm 640 mm 2020 mm 260 kg 100 mm 85 - 635 mm 1.170 mm 300 x 270 mm 600 x 380 mm 120 mm ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP USE geardrive machine manual feed left-right drilling table with t-slots depth adustable end tool ejector drill guard CE norms Hedowirzrspfx Agwjni user manual in GERMAN (sample photo) OPTIONS (PRICES ON REQUEST): lighting equipment coolant equipment and machine base with T-slots reverse for tapping DELIVERY TIME WITH OPTIONS APPROX. 6 WEEKS.

Condition: new, Year of construction: 2024, neu 2024 3982 prompt, Zwischenverkauf v Spanien 10830 € 207.94 € 1 35 mm MK 4 300 mm stufenlos 100 - 2.000 U/min 3 kW bis M 27 1100 mm 600 mm 1950 mm 360 kg 0,10 / 0,20 / 0,30 (3) mm/U 150 mm 125 mm 90-890 mm 1250 mm 480 x 480 mm ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP USE column drilling machine with vario gear 1-stage V-belt drive with stepless variable speed with a frequency converter and digital speed display 3 automatic feeds chuck guard left-right drilling T-Slots and integrated coolant equipment in base stand integrated lighting drill guard HEIGHT ADJUSTABLE, ROTATING AND TILTING TABLE WITH T-SLOTS reverse for tapping fast and precise setting and control of the speed without switching operations and without defined levels Hodpfxewiqvuj Agweni more particularly robust parts for wear resistant operation and smooth running compact design with high performance CE norms user manual in GERMAN

Condition: excellent (used), I am offering a professional DELO dispensing system – DELO-DIV pilot with a DELO-DIV VD450 manual dispenser. This equipment is designed for precise and controlled dispensing of adhesives and various media in industrial applications. The system is ideally suited for use in: • Electronics manufacturing • Automotive sector • Precision assembly • Laboratories and R&D • High-repeatability technical bonding processes Operation is managed via the DELO-DIV pilot touchscreen panel, which allows: • Saving and selection of dispensing programs • Manual dispensing (manual mode) • Precise adjustment of working parameters • Intuitive operator interface The DELO-DIV VD450 manual dispenser ensures high application accuracy and process stability. — Condition • Used Hnodpfsyc H U Sjx Agwsi • Fully functional • Normal signs of use • The unit powers on and responds correctly (visible in the pictures) — Set includes • DELO-DIV pilot controller (touchscreen panel) • DELO-DIV VD450 manual dispenser • Cables / connectors as shown in the photos — Additional information • Manufactured in Germany • CE / UKCA marking • Ideal for production facilities and process integrators

Condition: repair required (used), Year of construction: 1998, functionality: limited functionality, 2 drilling spindles, individually selectable 1 glue gun (note: glue pump missing) Hjdoytq R Espfx Agwoni Dowel insertion tool for 8 x 40 mm dowels The following issues were identified during testing: - Glue specification missing - Center stop rule missing - On the left working field, the front stops do not engage; instead, they lower when drilling on the right field - SPS module Beckhoff repeatedly fails. Machine must then be restarted. - Rubber pads under the hold-downs are missing. When inserting the dowels, the parts deform because the surface is too smooth

Condition: used, Year of construction: 1992, functionality: fully functional, drilling capacity: 40 mm, spindle stroke: 300 mm, number of spindles: 3, overall weight: 9,000 kg, Drilling machine for steel structures - drilling holes in steel profiles. manufacturer - PEDDINGHAUS Germany; type - TDK 1000/3; year of manufacture - 1992; number of drilling spindles - 3 pcs. (two horizontal and one vertical); drilling diameter in S355 steel - from 8 to 40 mm; type of drills - HSS high-speed steel; drill mounting in the spindle - Morse taper 4; drill cooling - through the spindle and channels inside the drill; spindle feed - hydraulic with pressure force adjustment; spindle extension - max. 300 mm; material feed and length measurement - roller; CNC control - SIEMENS Sinumerik 840; software - CIM Steel; Production capabilities: •drilling INP I-beams: 80-600 mm, IPE: 80-600 mm, IPB: 100-1,000 mm, IPBL: 100-1,000 mm, IPBV: 100-1,000 mm; •drilling UWP channels: 50 x 25 - 400 mm; •drilling equal-sided angles: 80 x 8 mm - 200 x 24 mm; •drilling unequal-sided angles: 80 x 65 x 8 mm - 250 x 90 x 16 mm; •drilling flat bars: min. 15 mm; Hsdpfxopl Dycs Agweni power consumption - 35 kW; original paint - the machine has not been painted; weight - 9,000 kg; CE - does not have; The machine is connected to the power supply, ready for testing.

Condition: used, functionality: fully functional, TENAX Horizontal Drilling Machine - after technical inspection, ready for operation Specification: • Condition: used, after comprehensive inspection • Manufacturer: TENAX • Table adjustable at an angle, size 50 x 21 cm • 2.5 HP motor (3-phase) • Four-knife shaft with helical shaft • Overall dimensions: 80x60x166 cm (L x W x H) Additional Information: • The machine is in good technical condition, ready for immediate use • The photos shown reflect the actual condition of the item for sale • Possibility to power on and check the machine on site • Auction price does not include VAT or transport costs Financing and Transport: • We arrange transport via MDD fleet, courier companies, or external carriers • Financing support available in the form of leasing or lease loan Hsdpjytprhofx Agwoni

Condition: new, Year of construction: 2026, - Thread cutting device - Control panel with OLED display - LED lighting - Quickly adjustable and ergonomic drilling depth stop - Continuously variable speed control via central rotary knob - Thermal overload protection - Spindle stop - Drilling protection with electric. Protection - Connection cable with Schuko plug TECHNICAL DATA - Spindle: B16 - Drilling depth: 60 mm - Projection: 220 mm - Column diameter: 70 mm Hnedpfxsfx U D Aj Agwsi - Spindle/work surface: 140 – 315 mm - Drill head height adjustment: by hand - Speed display: digital - Drilling depth display: digital - Feed (mm/revolution): by hand - Spindle speeds continuously variable: 60 – 6,000 rpm - Continuous/normal drilling capacity: 10/12 mm - Thread cutting capacity (depending on pitch): M6 - FACTORY WARRANTY: 3 years (single shift) - OPTION drilling package 1 (No. 296570) Machine vice Flott [felix] 2.0 80 and keyless drill chuck 1-13 mm (accuracy 0.17 mm) Price: € 275,- - FREE DELIVERY (Germany only) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 030724/2003, Used drilling and milling machine Serrmac TCO 40. Model TCO 40/P Clamping: MK4 Drilling up to 40mm Year of manufacture: 2003 Belt transmission - 3 pulleys Spindle speed: from 100 - 2200rpm Speed change - 2 x with motor 5x with belt shifting Table dimensions: 630x255mm Table stroke: 425x240mm Hnodpewrb Sxsfx Agwei Coolant pump

Condition: like new (used), functionality: fully functional, 5 pcs drill rod adapters SANDVIK Model: T51 HL1000PE D52 L840 Part no.: 7306-6019-02 Total length: 840 mm Suitable for drilling rigs with long extractor (52 mm bearing diameter) Hnedoyr Iqgspfx Agwsi

Condition: good (used), Type: SSB 3 A Machine No.: 5607 Year of manufacture: 1973 Equipment: - MK3 quill - Machine lamp - Quick-action drill chuck incl. morse taper arbor, clamping range 3-16 mm - Infinitely variable speeds Range 1: 0-900 rpm Range 2: 0-1700 rpm Hodexlqxfopfx Agweni - Thread cutting device Condition: good, workshop-tested, speed variator with new bearings

Condition: excellent (used), Year of construction: 2003, column diameter: 400 mm, drill diameter: 65 mm, Drilling ; Tapping in all directions Can be moved in 7 axes Fast preparation, accuracy and performence on heavy and bulky parts. Field using Turbines, Generators, Compressors, Steel Construction, Boilers Containers, Chemoical equipment, furnces of cement work and shipbuilding Arm Length: 2070mm Max. drill Ø cast: 65mm Max. tap Ø: 48M Stroke pinole: 350mm Max. distance spindle - table:1550mm Min. distance spindle - table:305mm Speeds / ranges: 900Rpm Hjdpfxeyub Spe Agweni Spindle Taper: 5ISO/Bt/Mk Column sleeve: 400mm Power: 4kW Max. drill Ø steel: 50mm Length: 3500mm Width: 1325mm Height: 3400mm Weight: 6570kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, functionality: fully functional, overall weight: 32 kg, input voltage: 230 V, Automatic internal lubrication – coolant is supplied directly to the core drill, increasing tool life and work quality STEPLESS speed adjustment – allows optimal matching of cutting speed to the material being machined Morse taper MK4, enabling the installation of various tools such as twist drills, countersinks, reamers, tap holders, or hole saws Hnjdpsyt I Uuofx Agwei Powerful high-torque motor with soft start and overload protection ensures reliable operation Strong electromagnet securely holds the machine in place during operation Ergonomic control panel enables quick and intuitive setting of work parameters Robust machine construction increases stability and minimizes vibrations during machining Wide range of applications – ideal for industrial, workshop, and service use Technical specifications: Drilling diameter (core bit): 100 mm Drilling depth (core bit): 100 mm Drilling diameter (twist drill): 38 mm Spindle stroke adjustment: 275 mm Maximum threading capacity: M32 Spindle speed min.: 50 rpm Spindle speed max.: 800 rpm Speed settings – number of gears / stepless: 1. 50–110 / 2. 20–200 / 3. 200–500 / 4. 320–800 Spindle taper: MK4 Weldon shank: 19/32 mm Distance spindle / base plate: 290 mm Distance Weldon shank / max. plate: 165 mm Magnet holding force: 20,500 N Magnetic base dimensions: 245 x 125 x 50 mm Motor power: 2,580 W Voltage: 230 V Dimensions – width: 330 mm Dimensions – depth: 430 mm Dimensions – height: 830 mm Weight approx.: 31.5 kg

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 15095.86 € 289.84 € 30 mm MK 3 300 mm 0 - 4000 U/min 3 kW M30x3,5 900 mm 610 mm 1980 mm 385 kg 0,10 / 0,16 / 0,25 mm/U 125 mm 150 - 700 mm 590 x 450 mm 125 mm INCLUDES FREE SPRING PACKAGE (with purchase until March 31, 2026) - VÖLKEL Precision Package (List price €54.90) Contents: + MGB GREEN RING FORM B 1 x M4 (35330) 1 x M5 (35334) 1 x M6 (35338) 1 x M8 (35342) + LÖHER Core Drill Bits (M4, M5, M6, M8) - FLOTT quick-release drill chuck 3-16 mm B18 (List price €115.43) - FLOTT tap holder B16 (List price €191.57) - Taper mandrel DIN 238 MK2/B16 (List price €26.18) - Taper mandrel DIN 238 MK3/B18 (List price €28.57) - Reducing sleeve DIN 2185 MK3/MK2 (List price €26.18) - Felix 2.0 - 120 mm (List price €571.15) YOU SAVE: 1.013,98 € Drilling capacity / normal drilling capacity 30/35 (in E335/ST60) Main switch Dispositif de taraudage Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob Hnedpfx Aeynnczegwoi Emergency stop button Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with CEE plug 3 years warranty for single shift operation Mechanical feed of the Z-axis incl. electromagnetic clutch for (3) feed rates Drilling cross with pushbutton (on/off) for feed rate In tapping mode: Right-left lifting via drill cross switch or optional foot switch OPTIONS: Drill package 5 (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 5309.85 € 102.48 € 18 mm MK 2 240 mm 30 - 3000 U/min 0.75 kW M12 (steigungsabhängig) 705 mm 355 mm 1825 mm 195 kg manuell mm/U 82 mm 180 - 870 mm 340 x 280 mm 100 mm INCLUDES FREE SPRING PACKAGE (with purchase until March 31, 2026) - VÖLKEL Precision Package (List price €54.90) Contents: + MGB GREEN RING FORM B 1 x M4 (35330) 1 x M5 (35334) 1 x M6 (35338) 1 x M8 (35342) + LÖHER Core Drill Bits (M4, M5, M6, M8) - FLOTT quick-release drill chuck 3-16 mm B18 (list price €115.43) Hnodpfx Aeynmz Aogwoi - FLOTT tap holder B16 (list price €191.57) - Taper mandrel DIN 238 MK2/B16 (list price €26.18) - Taper mandrel DIN 238 MK2/B18 (list price €26.18) - Felix 2.0 - 100 mm (list price €428.36) YOU SAVE: 842,62 € Drilling capacity / normal drilling capacity 18/20 (in E335/ST60) Thread cutting system Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob Manual feed EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with Schuko plug 3 years warranty for single shift operation OPTIONS: Drill package 3 (vice & keyless chuck) Coolant device LED lighting with pivot arm