Used Preservation Facility for sale (2,473)

Condition: repair required (used), Year of construction: 2016, operating hours: 90 h, functionality: limited functionality, fuel type: diesel, power: 44 kW (59.82 HP), nominal power: 44 kW (59.82 HP), continuous power: 44 kW (59.82 HP), continuous power (apparent): 55 kVA, Diesel Generator ETT-55E (55 kVA) for Sale Condition: Used. The cooling pump is not working and oil is entering the engine; the oil pump needs replacement. Otherwise in technically good condition. We can start the unit for demonstration. A brand new fuel pump is included in the offer. Manufacturer: ETT – Electrotech Dış Ticaret ve Tekstil Ltd., Turkey. Reliable three-phase diesel generator with automatic control panel and soundproof enclosure. Suitable for both backup power supply and continuous industrial or construction site use. Technical specifications: Model: ETT-55E Operating hours: 90 h Output (Standby): 55 kVA / 44 kW Bledpfexlngajx Abzop Output (Prime): 50 kVA / 40 kW Engine: Ricardo K4100ZDS (diesel, 4 cylinders, water-cooled) Alternator: WHI224D, brushless, with Automatic Voltage Regulator (AVR) Voltage / Frequency: 400 / 230 V – 50 Hz Current: 79 A Power factor (cosφ): 0.8 RPM: 1500 rpm Cooling: Water Fuel consumption: ~10 L/h (at 100% load) Fuel tank capacity: 260 L (up to 8 hours continuous operation) Dimensions (LxWxH): 2250 × 1000 × 1500 mm Weight: 1100 kg Year of manufacture: 2016 Country of origin: Turkey Controls and features: Automatic DATKOM DKG309 control module Emergency stop button Fuel level, oil pressure, temperature, and voltage sensors Battery charging system Automatic transfer switch (ATS) for mains/generator control Overvoltage, overload, and low oil pressure protection Soundproof enclosure – reduced noise levels Manual or automatic operating mode Typical applications: Suitable for: - Industrial facilities, warehouses, production plants - Construction sites and mobile workplaces - Backup power for hotels, hospitals, office buildings, or farms A reliable solution for stable and uninterrupted power supply. Feel free to contact us if you have any further questions.

Condition: used, Year of construction: 2012, Capacity: 10 baskets Quantity: 8 Eaton washing tubes, model TBF-0102-AD10 Bedpjxuf Erefx Abzslp

Condition: good (used), For sale: robust German industrial washing machine from the renowned brand Miele, model WS 5141 EL. This unit is designed for intensive use in commercial laundries, hotels, hospitals, or production facilities. It is equipped with an automatic detergent dosing system and a high-performance heating unit with a power output of 15 kW. - Technical specifications: • Model: Miele WS 5141 EL • Type: Industrial washing machine, freestanding • Power supply: 3N~ 380–415V / 50–60Hz • Heating power: 15 kW • Power consumption: 15.4 kW • Load capacity: up to 14 kg • Spin speed: up to 1000 rpm • Drum: Ø 590 mm x 512 mm • Weight: approx. 380 kg • Electronic controls with programmer and automatic dosing • Protection class: IP X4 • PC / programming interface - Technical condition: • Fully operational unit • Ready for connection – complete • Dosing system requires a refill for container no. 2 (message displayed on the screen) • Inspection valid until 2025 (Miele service sticker) • Recently decommissioned from an industrial line Blsdjw Hhvmjpfx Abzjp - Applications: Ideal for: • Commercial laundries • Industrial facilities • Care homes / hospitals • Hotels and guesthouses • Cleaning companies - Why is it worth it? Premium-class German-made machine – extremely durable construction, perfect for intensive operation. Instead of investing in a new one for PLN 20,000–25,000 net, save a substantial amount while maintaining Miele’s renowned quality and reliability. - Included: • Miele WS 5141 EL washing machine • Cabinet with dosing installation (as shown in the photos) • All connection hoses and cables

Condition: excellent (used), Year of construction: 2009, Arburg 470C 1500-400 Year of manufacture: July 2009 Injection unit: Screw diameter: 45 mm Injection weight: 232 g Injection pressure: 1580 bar Dosing volume: 254 cc Clamping unit: Clamping force: 150 t Type distance: 470 x 470 mm Clamping platen size: 650 x 650 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Additional equipment: Core pull control Injection unit hardened - bimetal Screw diameter can be changed Dimensions: Weight: 4790 kg Length/Width/Height: 4.44 x 1.63 x 2.09 m Drive: Pumps/Motor: 18.5 kW Heating power: 9.4 kW Total power: 27.9 kW All offered machines are started by our service technicians before sale. Blodpoxqyumofx Abzep You can receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request

Year of construction: 2023, condition: new, CAT988 Marble Fork, Bucket and Quick Coupler Loader marble attachments are specialized tools designed to fit on loaders to handle, lift, and transport marble blocks safely and efficiently. These attachments are optimized to comfortably carry buckets, forks and quick coupler according to marble's weight. Their design ensures minimal damage to the marble while providing stability during transport and operations. Bljdpfx Abjpa Rb Iezop These attachments are essential in quarries and processing facilities where large marble blocks are frequently moved.

Condition: like new (used), operating hours: 150 h, compressed air connection: 10 bar, AERO2 PCS 60 Designed to give the user full control. Using Cold Jet’s patented Particle Control System (PCS), dry ice is cut into diamond-shaped particles in precisely the dimensions selected by the user (from 3 mm pellets down to 0.3 mm particles, and any size in between). This allows the operator to precisely adjust the blasting parameters for each specific application. Features • Revolutionary and patented Particle Control System (PCS) • Advanced aerodynamic dosing unit with low-load airlock Bjdpsxfr Egofx Abzolp • 7" LCD screen with digital controls • Coated tool-grade aluminum alloy, stainless steel, and polymer frame • Patented advanced direct-drive dosing system Specifications • Variable dry ice particle size: 3 mm - 0.3 mm Accessories: 1x 5 m compressed air hose 4x 10 m compressed air hose extension 1x 5 m blasting hose with gun 1x 5 m blasting hose with gun (purchased new in 2025) 4x nozzle attachments 2x containers for 100 kg dry ice each External dimensions (W x L x H): 80 x 60 x 100 cm Internal dimensions (W x L x H): 67 x 45 x 70 cm Tools for hose assembly included Minor signs of use Machine has 150 operating hours On-site instruction at my premises included.

Condition: used, functionality: fully functional, Year of construction: 2012, For sale: Electric Overhead Travelling Crane 10 T (AT-101, 2012) Condition: Very good, well-maintained, and technically sound. Reliable electric overhead travelling crane (Electric Hoist Type AT-101) designed for lifting and transporting heavy loads in manufacturing and storage facilities. Technical specifications: Model: Electric Hoist Type AT-101 Lifting capacity: 10 tons Bledpfx Abexm Tr Dozop Lifting height: 12 m Lifting speed: 8 m/min Travel speed: 20 m/min Power supply: 380 V Duty cycle: 25% ED (short-term periodic duty) Year of manufacture: 2012 Application: Electric overhead travelling crane designed for lifting, transporting, and positioning heavy loads, equipment, or metal blanks. Suitable for use in: - manufacturing workshops, - mechanical repair shops, - warehouses and logistics centers, - metal processing lines. If you have any further questions, please do not hesitate to contact us.

Condition: used, Year of construction: 2002, Type: Parts Cleaning Machine Manufacturer: Durr Model: Ecoclean 78W-KVI Year of Manufacture: 2002 Serial Number: K125 205 178 Condition: Used Quantity: 1 Bodpsxufm Nofx Abzolp

Condition: excellent (used), Overhead travelling crane + STAHL ST2010 hoist • Lifting capacity 2000 kg • Length 10.42 m For sale: a complete and fully functional overhead travelling crane with a high-quality STAHL ST2010 chain hoist, offering a lifting capacity of up to 2000 kg. The set is pre-owned but in very good technical condition. ✅ Technical specifications: * Type: Single-girder overhead travelling crane * Beam length: 1042 cm (10.42 m) * Lifting capacity: 2000 kg * Hoist: STAHL ST2010 – proven, reputable unit Blodpfx Abswcq Epjzsp * Power supply and cable management along the entire runway * Stable steel construction – ideal for production facilities or industrial workshops

Condition: excellent (used), Year of construction: 2009, Arburg 470C 1500-400 Year of manufacture: July 2009 Injection unit: Screw diameter: 45 mm Injection weight: 232 g Injection pressure: 1580 bar Dosing volume: 254 cc Clamping unit: Clamping force: 150 t Type distance: 470 x 470 mm Clamping platen size: 650 x 650 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Additional equipment: Core pull control Injection unit hardened - bimetal Screw diameter can be changed Dimensions: Bljdpfjxqyt Aex Abzjp Weight: 4790 kg Length/Width/Height: 4.44 x 1.63 x 2.09 m Drive: Pumps/Motor: 18.5 kW Heating power: 9.4 kW Total power: 27.9 kW All offered machines are started by our service technicians before sale. You can receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request

Condition: used, Field of application: Construction CAT988 Marble Fork, Bucket and Quick Coupler Loader marble attachments are specialized tools designed to fit on loaders to handle, lift, and transport marble blocks safely and efficiently. These attachments are optimized to comfortably carry buckets, forks and quick coupler according to marble's weight. Their design ensures minimal damage to the marble while providing stability during transport and operations. Bedpfx Ajphqrpsbzolp These attachments are essential in quarries and processing facilities where large marble blocks are frequently moved.

Condition: new, functionality: fully functional, Year of construction: 2025, This is a specialized plant designed to crush hard and abrasive basalt and granite, with a capacity of 250-300 tons per hour. Its primary equipment includes jaw crushers, cone crushers, and vertical shaft impact crushers. This example facility operates in Romania. Bedpfoxqycwex Abzslp At General Makina, we design and manufacture stone crushing, screening, and washing plants specifically for your investment projects, and we provide worldwide shipping. Contact us for more information.

Condition: good (used), Year of construction: 1997, Rust size: 700 x 650 x 1.100 mm (W x H x L) batch weight: 350 kg heating: electrical, 70 kW Blsdpfx Aexr At Ijbzjp temperature: max. 80°C

Condition: good (used), Year of construction: 2025, Maynards is offering the machinery and equipment from GoodYear’s 17–22 inch passenger car and SUV tire production facility in Fulda. On-site production will continue until the end of September 2025. We invite you to express your interest and submit offers for the complete facility or larger equipment packages. Immediate purchase is possible. Products (until closure): - High-performance and ultra-high-performance tires - Run-on-flat tires - SUV/4x4 tires - Diameter range: 17–22 inches Plant and Systems: - Mixing lines (Banbury 1–3) - Extrusion lines (Triplex, Quadruplex) - Apexing and filling/weighing systems - Steel cord production (winders, extruders, carousel, spoolers) - Tire building machines (R2.5, SOC-88, R1, ISR1, cutting machines) - Calendering lines (Comerio, framework, winding machines) - Tire curing and finishing lines - Tire curing presses (HF & Krupp, 77 units) - Grinding and cut-to-length machines (Matteuzzi, Collmann, Roentgen, TR5, TR7) - Cutting and calendering systems (Bias 66, KEF HTBC, rubber calender) Bledpfsxa Dqdsx Abzsp - Tire carts - Tire testing equipment Utilities and Supply Systems: - Steam boiler systems - Water treatment - Oxygen supply & compressors Storage and Infrastructure: - Silos & oil tanks - Fire protection and safety systems (plant fire brigade) - Material handling and transport equipment (forklifts, tow tractors, pallet trucks) - Hydraulic pallet turners Workshop Area: - Maintenance of machinery and equipment Notes: - All machinery and equipment is offered “as is, where is.” - All Goodyear-specific data has been removed, and the software has been reset to factory settings.

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 14 kg, total width: 245 mm, total length: 420 mm, total height: 450 mm, input voltage: 230 V, noise level: 59 dB, warranty duration: 12 months, volume flow: 420 m³/h, Equipment: chassis, type plate available, Fume extraction with remote control and suction hose Air inlet interface ρm flange Max. Power 300W Air velocity 24/ms Filtration efficiency 0.3 µm / 99.97%. Noise 59ᐸdb Length of suction hose 1.5M System shear flow approx. 420m³/h Dimensions L420 x B245 x H450 Weight 14.0kg Application: This product is suitable for places dealing with air pollution such as smoke, peculiar odors, dust, toxic and harmful gases generated during soldering process, laser marking and engraving, printing, etc. - Extraction unit for use in the workplace - Separately replaceable fine dust pre-filter M5 - Large HEPA H 13 filter surface with 2.4m² for optimum particle filtration and long filter service life - Activated carbon for effective gas cleaning - Portable extraction unit, for flexible placement directly under or next to the workplace - Easy filter change - Variable power control through percentage speed settings in 10 steps Bsdpfxjxt Dq Rs Abzslp - Health protection through electronic filter monitoring and filter alarm - Long service life thanks to high-quality EC blower - Quick, easy and stable installation thanks to Easy-Click system

Condition: excellent (used), Year of construction: 2008, Arburg 470S 1100-400 with Wittmann W711 Robot Year of manufacture: 2008 Injection Unit: Screw diameter: 40 mm Shot weight: 184 g Injection pressure: 2000 bar Dosage volume: 201 cc Clamping Unit: Clamping force: 110 t Tie bar distance: 470x470 mm Platen size: 637x637 mm Ejector: hydraulic Clamping unit: hydraulic Control System: SELOGICA – Touchscreen Additional Equipment: Euromap 67 Robot interface 2 x air valve 1 x hydraulic core pull Control system with 8 hot runner zones Hardened injection unit – Bimetallic Proportional valve on injection unit – precise injection Blodpfx Abjxqyqnszjp Conveyor belt integrated with machine control Built-in sorting flap Screw diameter can be changed Wittmann W711 robot Year of manufacture: 2008 4-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z; C axis – pneumatic Travel paths in axes: X-420, Y-1200, Z-2000 Touch control panel Robot with adapter Robot purchase available at extra cost Dimensions: Weight: 5200 kg Length/Width/Height: 4.56x1.52x2.13 m All machines offered will be started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: new, functionality: fully functional, Year of construction: 2025, This facility, which we manufacture for the crushing and screening of dolomite at a capacity of 250 to 300 tons per hour, includes the following equipment: Jaw Crushers, VSI Vertical Shaft Crushers, Secondary Impact Crushers, and Tertiary Crushers. Bljdpfx Aboxqx Nijzep Contact us now to purchase this example plant or a new crushing and screening plant that we can customize to your specifications.

Condition: good (used), Year of construction: 2007, Connected load: 75 kW Control system: Siemens Simatic Panel Touch Cleaning agent: aqueous cleaning agents Filling capacity: 1,070 l Loading/unloading by roller conveyor system, approx. 400 mm, roller width 600 mm Bljdpsxr Atzofx Abzep Loading conveyor, discharge conveyor with cooling section, removal station, with transfer unit Removal / control station f. Oil separator

Condition: excellent (used), Year of construction: 2012, Sumitomo Demag Systec 350/720-2300 / Production Line with Wittmann-Demag DR833 Robot Year of manufacture: 2012 Injection Unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Dosage volume: 1212 cm³ Clamping Unit: Clamping force: 350 t Tie bar distance: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping system: toggle lever Control system: NC5 Additional equipment: Euromap 67 Robot interface 5x air valves 1x hydraulically operated core pull with proportional valve 5x hot runner controls Hardened injection unit – bimetal Moog proportional valve on the injection unit – high-precision injection Parallel movements Central lubrication 3 variable-capacity hydraulic pumps Integrated printer Bedpfx Absxqymiszjlp Machine has been regularly serviced by authorized Sumitomo Demag technicians Robot Wittmann-Demag DR833 Year of manufacture: 2011 4-axis robot: 3 axes driven by servomotors (electric), Y-axis telescopic; C-axis pneumatic, A-axis movement Axis travel: X-900, Y-1600, Z-3000 Touch control panel Robot safety package Robot with adapter, conveyor belt, and protective enclosure Purchase of the robot and conveyor belt at additional cost Dimensions: Weight: 15,750 kg L x W x H: 8.26 x 2.01 x 2.27 m All offered machines are started up by our service technicians prior to sale. It is possible to obtain a video of technical tests for the selected machine, or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2013, Sumitomo Demag Systec 100/420-310 with Sepro SR SDR11 S3 TRANS robot / Hybrid Machine Year of manufacture: 2013 Injection unit: Screw diameter: 35 mm Shot weight: 149 g Injection pressure: 2024 bar Dosage volume: 168 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Platen size: 600x600 mm Ejector: hydraulic Clamping unit: hydraulic Control system: NC5 Bljdpfx Asxqylxebzop Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Operating hours: approx. 38,000 h in automatic mode Robot interface Air valve x 2 Hydraulic core pull x 1 Hardened injection unit - bimetallic Main motor of the machine - servo motor driven by inverter - energy saving Built-in printer Machine was regularly serviced by authorized Sumitomo Demag service Robot Sepro SR SDR11 S3 TRANS Year of manufacture: 2013 5-axis robot: 3 axes driven by servomotors (electric); axes A and C (rotation) - pneumatic Touch control panel Robot safety package Robot with adapter, safety enclosure Robot acquisition available at an additional cost Dimensions: Weight: 4400 kg Length/Width/Height: 4.20x1.40x2.00 m All machines offered are started up by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine, or to take part in technical live tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2010, Krauss Maffei KM 130-750 CX PolySet Year of manufacture: 2010 Injection unit: Screw diameter: 40 mm Injection weight: 228 g Injection pressure: 2500 bar Dosing volume: 251 cc Bsdpfjxqylfex Abzjlp Clamping unit: Clamping force: 130 t Type distance: 470 x 470 mm Clamping platen size: 745 x 770 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC5 Additional equipment: Euromap 67 Robot interface Hydraulic core puller x 1 Air core puller x 6 Control system with hot runners x 18 Injection unit hardened - bimetal Proportional valve on the injection unit for precise injection Dimensions: Weight: 9000 kg Length/Width/Height: 4.90 x 1.60 x 2.10 m All machines offered are tested by our service technicians before sale. You can request a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2005, Arburg 1200T 800-150 / Vertical Injection Molding Machine with Rotary Table Year of Manufacture: 2005 Injection Unit: Screw Diameter: 25 mm Injection Weight: 45 g Injection Pressure: 2500 bar Dosing Volume: 54 cc Clamping Unit: Clamping Force: 80 t Tiebar Distance: 0 x 0 mm Clamping Platen Size: 1200 mm Ejector: Hydraulic Clamping Unit: Hydraulic Control System: SELOGICA Additional Equipment: Air Valves x 6 Hydraulic Core Pullers x 6 Control System with Hot Runners Injection Unit Hardened - Bimetal Rotary Table Diameter: 1200 mm Kistler Sensor - Mold Pressure Control Machine serviced by the authorized Arburg Service Center in Germany Dimensions: Weight: 7400 kg Length/Width/Height: 3.92 x 1.61 x 3.78 m Drive: Pump/Motor: 22 kW Heating power: 9.4 kW Total power: 31.4 kW Bledpfx Aboxqyflszep All offered machines are started by our service technicians before sale. You can receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2011, Arburg 370H 600-100 / Hybrid Machine Year of manufacture: November 2011 Injection unit: Screw diameter: 20 mm Injection weight: 29 g Injection pressure: 2500 bar Dosing volume: 31 cc Clamping unit: Clamping force: 60 t Type distance: 370 x 370 mm Clamping platen size: 510 x 510 mm Ejector: electric Clamping unit: toggle-type Control system: SELOGICA - touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Robot interface Air valve x 3 Blsdjxqyb Hjpfx Abzsp Hydraulic core pull x 1 Control system with hot runners x 12 Hardened injection unit - bimetal Main machine motor - servo motor driven by an inverter - energy saving The injection unit is driven by the servo motor Driven by an inverter Machine with cylinder/battery with compressed nitrogen (additional charging for fast work) Central lubrication Dimensions: Weight: 3190 kg Length/Width/Height: 3.68 x 1.45 x 2.04 m All offered machines are started by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2007, Arburg 270C 400-70 Year of manufacture: 2007 Injection Unit: Screw diameter: 22 mm Shot weight: 31 g Injection pressure: 2000 bar Dosage volume: 34 ccm Clamping Unit: Clamping force: 40 t Tie bar spacing: 270x270 mm Platen size: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface 2x air valves 1x hydraulic core pull Hot runner control Injection unit hardened - bimetallic Proportional valve on the injection unit – precise injection Screw diameter change possible Dimensions: Weight: 2370 kg Length/Width/Height: 2.99x1.43x1.98 m All offered machines are started and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: On request Bledpfjxqx Thex Abzop

Condition: excellent (used), Year of construction: 2011, Engel Victory 500/80 Tech / Production Line with Engel Viper 12 Robot Year of manufacture: 2011 Injection Unit: Screw diameter: 45 mm Shot weight: approx. 295 g Injection pressure: 1,598 bar Bljdexqx Ncopfx Abzop Dosage volume: 318 cc Clamping Unit: Clamping force: 80 t Tie bar spacing: 0x0 mm Platen size: 670x600 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 200 - touchscreen Additional equipment: Tie-bar-less machine Euromap 67 Robot interface 3x hydraulic core pull Injection unit hardened - bimetallic Robot Engel Viper 12 Year of manufacture: 2014 5-axis robot: 4 axes driven by servo motors (electric); Axis A - pneumatic Touch control panel Robot with adapter and protective housing with part separator Robot available for purchase at additional cost Dimensions: Weight: 5,300 kg Length/Width/Height: 4.57x1.48x2.38 m Drive: Pump/motor: 15 kW All offered machines are started up and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or participate in live technical tests at our facility in Łódź. Price: On request