Used Press Pack for sale (15,246)

Condition: ready for operation (used), Year of construction: 2004, Pack press Signode with plastic strapping Nsdpfx Aezca Uxelhelc

Year of construction: 1995, condition: good (used), machine/vehicle number: 2103, 2 Colours Nljdpfxefuwmqs Alhoc Quick Action Clamps Water Dampening Colour Rollers Water Rollers

Condition: reconditioned (used), Year of construction: 2019, operating hours: 3,000 h, functionality: fully functional, pressing force: 70 t, overall weight: 9,500 kg, year of last overhaul: 2025, filling opening width: 420 mm, filling opening length: 1,250 mm, Technical data packing press / can press / metal sheet press: Manufacturer unoTech GmbH Type UPAXX 70 Year of manufacture 2019 Operating hours approx. 3,000 hours Pressing force 700 kN at 315 bar Nodpfx Aszbxvlslhelc Filling opening chute 420 x 1,250 mm (d x w) Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on material Drive power 30 kW Connected load 40 kW Power consumption, total 70 A Throughput capacity for empty beverage cans with: one pressing stroke approx. 1.7 t/hour two pressing strokes approx. 2.5 t/hour Achieved compaction approx. 1200 kg/m³ Hydraulic oil tank capacity 850 l Press dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h) Transport weight press approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Material properties: According to the manufacturer, this machine is suitable for pressing tin cans, metal sheet offcuts, sheet steel as well as aliminium, brass and copper waste. Condition of the baler: The packing press has been fully overhauled in our workshop. The press is in very good condition; please see the demonstration video following the overhaul. The machine sustained transport damage whilst being moved. The control cabinet was damaged and slightly dented by a forklift truck, and the main switch (on/off switch) was damaged. These damages are reflected in the significantly reduced sale price and must be repaired by the buyer at their own expense. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, total width: 6,265 mm, total length: 7,420 mm, total height: 3,900 mm, Baling Press Henschel PS 3-30 / 30 B Year of manufacture: 1999 (refurbished and modernized by ATM in 2016) Immediately operational (all necessary repairs and servicing have been carried out by us) Main dimensions of the entire machine: Length: 7420 mm Width: 6265 mm Height: 3900 mm Total weight: approx. 38 t Feed opening: 1210/2150 x 1900/2340 mm Technical data: Motor: 1 x 90 kW Pressing force: - 1st compression: 1000 kN - 2nd compression: 1570 kN Nljdpfx Aloyx Axgohoc - 3rd compression: 2000 kN - Bale door closing force: 200 kN Bale size: 300 x 300 mm

Year of construction: 2026, condition: new, The machine is lightly used, serviced, with a 6-month manufactur warranty, and supplied with new press cloths and racks. Technical details: Performance: 1000 kg/h Nlsdpfxeikbacs Alhsc Press power: 25 T Electric demands: 2,2 kW, 400 V, 6 A Material: WNr. 1.4301, AISI 304 stainless steel Dimesions: 1000x2300x1900 mm Weight: 860 kg IP65 certified electronics Food industrial polyester press clothes Easy to clean Requires minimal maintenance High yield: 75% – depends on the freshness and quality of the fruits Accessories: 18 pcs polyester press clothes and 20 pcs acacia press grids. For high juice extraction of various fruits. (apple, pear, blackberry, strawberry, blueberry, elderberry (destemming needed), currant (destemming needed), peeled carrots, herbs, quinces, beets, sea buckthorn, rowan berries and onions. The work is significantly accelerated so that while one workspace is being pressed, the other can be prepared without any time out. Heavy-duty vibration-free machine feet. It requires minimal maintenance.

Condition: new, capacity up to 150 kg/h power 1,1 (1,5) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A Nljdpfx Aljb Nc Dnehjc dimensions: length 1 100 mm width 990 mm height 1 430 mm insertion resp. discharge height 1 080 mm weight 160 kg material (frame and juice collection tank) 1.4301 / AISI 304 pressing force 14 to pressing pressure 380 bar juice yield up to 75 % juice discharge connection Ø 30 mm juice discharge height 470 mm suitable for pomaceous and stone fruit scope of delivery: 7 press cloths 70 x 70 cm, 8 press inserts acacia wood 41 x 41 cm

Condition: new, Packing press 180P2 Inox with hydraulic Lifting and lowering device capacity up to 1 200 kg/h power 1,5 (2,0) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 2 300 mm width 840 mm height 1 850 mm insertion resp. discharge height 1 380 mm weight 885 kg material (frame and juice collection tank) 1.4301 / AISI 304 pressing force 50 to pressing pressure 320 bar juice yield up to 75 % juice discharge connection 1 ¼ “ juice discharge height 420 mm suitable for pomaceous and stone fruit scope of delivery: 24 press cloths 100 x 100 cm, 26 press inserts plastic 65 x 65 cm Njdpfx Aleb Nc Sbohelc

Condition: new, capacity bis zu 300 kg/h power 1,5 (2,0) kW (PS) Nedpfxjb Nc Hds Alhelc electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 1 250 mm width 1 210 mm height 1 510 mm insertion resp. discharge height 1 220 mm weight 270 kg material (frame and juice collection tank) 1.4301 / AISI 304 pressing force 24 to pressing pressure 380 bar juice yield up to 75 % juice discharge connection Ø 30 mm juice discharge height 420 mm suitable for pomaceous and stone fruit scope of delivery: 9 press cloths 80 x 80 cm, 10 press inserts acacia wood 50 x 50 cm

Condition: new, Packing press 100P2 with two shift press cages capacity up to 600 kg/h power 1,5 (2,0) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 1 890 mm width 1 210 mm height 1 510 mm insertion resp. discharge height 1 220 mm weight 300 kg material (frame and juice collection tank) 1.4301 / AISI 304 pressing force 24 to Nledpfx Ajb Nc Imslhoc pressing pressure 380 bar juice yield bis zu 75 % juice discharge connection Ø 30 mm juice discharge height 420 mm suitable for pomaceous and stone fruit scope of delivery: 18 press cloths 80 x 80 cm, 20 press inserts acacia wood 50 x 50 cm

Condition: new, capacity up to 6 000 kg/h power: elevator 2,2 (3,0) kW (PS) mill 5,5 (7,5) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A Nedpfx Aob Ncmmslhelc dimensions: length 1 800 mm width 900 mm height 2 450 / 2 700 mm insertion resp. discharge height 800 mm weight 420 / 450 kg material 1.4301 / AISI 304 connections: connection for cleaning ½ “ inside connection for washing bath 2 “ outside mash discharge height 1 380 mm suitable for pomaceous fruit scope of delivery 12 mm cutting screen

Condition: new, capacity up to 600 kg/h power 1,5 (2,0) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 2 080 mm width 1 030 mm height 1 450 mm insertion resp. discharge height 1 520 mm Nlodob Nc N Uopfx Alhoc weight 295 kg material (frame and juice collection tank) 1.4301 / AISI 304 pressing force 24 to pressing pressure 380 bar juice yield up to 75 % juice discharge connection Ø 30 mm juice discharge height 400 mm suitable for pomaceous and stone fruit scope of delivery: 18 press cloths 80 x 80 cm, 20 press inserts acacia wood 50 x 50 cm

Year of construction: 2025, condition: new, The press is suitable for high juice yields of various fruits such as apples, pears, blackberries, strawberries, blueberries, currants, carrots, herbs, quinces, onions, etc. The types of fruit listed above have been tested by our customers with our packing presses. The system is equipped with an automatic pressing programme so that the system switches off the pressing pressure itself at the end of the pressing process. You can order the machines with one or two turning juice basins. Accessories: • 18 pieces of press cloths • 20 pieces of press grate Technical Information • Output: 600 kg/h • Pressing force: 18 T • Power consumption: 2.2 kW, 230 V, 10 A • Material: Wnr. 1.4301, AISI 304 stainless steel Dimensions: • 1,250×1,370×1,520 mm • Weight: 450 kg • IP65 electronic switch boxes Nsdpfx Aletz Sp Djholc • High yield up to 60–80%

Year of construction: 2025, condition: new, The press is suitable for high juice yields of various fruits such as apples, pears, blackberries, strawberries, blueberries, currants, carrots, herbs, quinces, onions, etc. The types of fruit listed above have been tested by our customers with our packing presses. The system is equipped with an automatic pressing programme so that the system switches off the pressing pressure itself at the end of the pressing process. You can order the machines with one or two turning juice basins. Njdpfxjtz Spkj Alhelc Accessories: • 18 pieces of press cloths • 20 pieces of press grate Technical Information • Output: 1000 kg/h • Pressing force: 18 T • Power consumption: 2.2 kW, 230 V, 10 A • Material: Wnr. 1.4301, AISI 304 stainless steel Dimensions: • 1,000×1,680×2,720 mm • Weight: 720 kg • IP65 electronic switch boxes • High yield up to 60–80%

Condition: like new (used), Year of construction: 2024, operating hours: 3,000 h, functionality: fully functional, machine/vehicle number: QYKM-1400x2900, total height: 3,200 mm, total width: 4,300 mm, total length: 7,600 mm, overall weight: 2,500 kg, Equipment: documentation/manual, We are selling our as-new pizza box machine due to business closure. The machine was ordered from China. It is nearly new and operates flawlessly. All components are fully functional. Coating can be applied at any time. Njdpfexvy Hmsx Alhjlc

Condition: used, This listing is for a second-hand DTG/DTF printer, the ‘Brother GTX 423Pro’ Items included: 1 x Brother GTX 423Pro with the following accessories: Includes Lotus Heat Press LTS 150B Slide Includes Schulze PreTreat maker 5 Meter readings: Total: Approx. 5,500 prints Nledsy R Nmhjpfx Alhsc Condition: This listing is for a second-hand device, which may show signs of use (minor scratches or discolouration). The device has been tested for functionality A test print can be seen in the photo Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment for this! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, High-performance baler MACFAB - BEMA type 650A Hydraulic press for packaging waste, recyclable renewable raw materials, secondary raw materials Manufacturer no. MF J0162 Year of manufacture 2021 Pressing force 50 tons. Press plate stroke approx. 1000 mm Cycle time per stroke approx. 40 sec. Pressing chamber floor area 1500 x 1100 mm Pressing chamber height 1650 mm Filling opening 1500 x 870 mm Filling height approx. 1250 mm Bale format 1500 x 1100 mm Bale height max. 1100 mm Hydraulic operating pressure 200 bar Motor power 5.5 kW Mains connection 400 volts, 50 Hz, 12 amps. - with two hydraulic cylinders - Door locking via threaded spindle with handwheel - Pressing operation only with the pressing chamber door closed - 2-hand operation for hydraulic tipping of the finished pressed bale - Free space for manual strapping - Standard industrial bales of 1500 x 1100 x 1100 mm are produced - the highly compressed bale is automatically tipped onto a pallet - only 62 operating hours Space requirement L x W x H 2120 x 1350 x 3220 mm Nlodpfx Asvq Rtkelhsc Height for transport with lowered hydraulic cylinders approx. 260 cm Weight 1.8 ton. The machine is in very good condition, as good as new. The press has a new price of EUR 22,200 net at BEMA The BEMA company also buys the packaging waste that you press into bales with this press.

Condition: used, We offer pallets of approximately 5,000 kg open-type compressors, featuring a mix of Bitzer, DWM, and Bock units. This lot has been assembled for trade, export, and stock building purposes and is sold as a single complete batch. The entire package is available for one fixed package price. No individual sales are offered. Nledpsycvkvsfx Alhec If you have any questions or require additional availability, please contact us.

Condition: used, Year of construction: 2024, operating hours: 24 h, functionality: fully functional, machine/vehicle number: 02/GM39, We offer this used Fair Pack MC 1003 pouch filling & sealing machine, year of construction 2024. Manufacturer: Fair Pack Model: MC 1003 Year of manufacture: 2024 Condition: used Category ID: 436 Njdpfozdu Inox Alhelc Type ID: 493 Machine type: Pouch filling & sealing machine If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Impress HM 4 Hot Stamping Press This machine is in very good condition and ready to use. This machine is from the popular Impress hot stamping machine manufacturer, manufactured in the UK. Description The Impress hot stamping press is a hot stamping and embossing press for paper and plastics. It’s a useful device in any advertising agency or digital printing house. The manual press is powered by only 230V. A powerful press with adjustable pressure ensures repeatability and very high pressure between the die and the material. The machine features a worktop with a slide-out function, adjustable embossing depth, a heating plate with a thermostat, and an automatic foil feed. Specifications: Heating temperature control via thermostat Heating plate pressure mechanism: mechanical Nledpezday Refx Alhec Press force: 1000 kg Power consumption: 500 W Power supply: 230 V Machine weight: 50 kg Plate size: 150 x 150 mm.

Condition: good (used), HFS-210 Hot Stamping Press The machine is in perfect condition. Year of manufacture: 2019. Description: The HFS-210 Hot Stamping Press is a pneumatic hot stamping press for hot stamping, embossing paper, and plastics. A useful device in any advertising agency or digital printing house. The cycle is operated manually. The pneumatic drive ensures repeatable work and very high die pressure on the material. The machine is equipped with an automatic foil feed, which significantly shortens the time of a single hot stamping cycle, a worktop, adjustable embossing depth, a hot plate ground to 0.01 mm accuracy, which significantly improves the quality of embossing with large dies, a control panel, and modern OMRON controls. Specifications: MODEL: HFS-210 Hot Stamping Press Heating plate size: 210 x 150 mm Nljdezdau Uepfx Alhec Work table area: 500 x 350 mm Heating temperature control: via display up to 200°C Holding foil adjustment: Automatic, potentiometer-controlled Hot plate pressure mechanism: pneumatic Height of the gilding stack: 68 mm Press force: 0.6 T Power consumption: 900 W Power supply: 230 V Machine dimensions: 750 mm (W) x 530 mm (D) x 1670 mm (H) Machine weight: 120 kg The machine includes a cross table and a die mounting frame. An instruction manual is included.

Condition: good (used), Screw bookbinding press 40×30 with base The machine is fully operational and ready for operation. Format: 400×300 mm Nledpfx Ajzdat Rslhsc Pressure: 3 tons Made in Germany.

Condition: good (used), Bookbinding press with tapping block The machine is fully operational and ready for use. Nodpfszdatqox Alholc Approximate format: 480 x 330 mm 3-ton pressure

Condition: new, Year of construction: 2024, functionality: fully functional, operating hours: 1 h, type of input current: three-phase, table width: 1,000 mm, table length: 2,600 mm, total length: 2,000 mm, total width: 3,090 mm, total height: 3,600 mm, overall weight: 3,800 kg, workpiece height (max.): 60 mm, Wood gluing press 12 working fields main cylinders 12 x 3 =36 pieces ,cylinders 63 x 60 and 4 pressure side levelling 50 x 50 pieces 12 x 4 =48 pieces .Machine new invoice .Warranty one year .Press rotates with inverter controlled transmission .Press stop is on induction sensor .Or rotates smoothly .Actuation of cylinders with lever switches press field is one meter width 2,6 length 60 mm thickness . Nodpfjtx T Tyox Alhslc

Condition: used, Year of construction: 2022, PRODUCT TYPES: • Four-side seal pouches • Quad seal pouches • Side seal pouches • Transverse zipper pouches • Gusset pouches • Bottom stick hole pouches • Micro-perforated pouches • Handle hole pouches • Round corner pouches MATERIALS: • LDPE • CPP • MCPP • AL • Nylon • PP • Laminated film structures MAIN TECHNICAL INFORMATION: Material thickness: 60–250 μm Max. web width: 1300 mm Max. roll diameter: 800 mm Core diameter: 3” and 6” Max. pouch width, quad seal: 400 mm Max. pouch length: 1000 mm Eye mark accuracy: ±1 mm Machine speed: 15–65 pcs/min Material speed: 40 m/min Main power: 400V, 50Hz, 3 phase Installed power: 100 kW Machine weight: approx. 18,000 kg Machine size: 33,500 × 4,200 × 1,800 mm POUCH SIZE RANGE: Quad seal / side welded width: 180–400 mm Gusset depth: max. 80 mm Minimum gusset depth: 30 mm Bag length: 360–1000 mm UNWINDING SECTION: • Air shaft unwinding • Magnetic powder brake • Dancing roller tension control • Servo-driven unwind system PERFORATION SYSTEM: • Micro perforation unit • Wheel-type perforation • Additional perforation holes • Same type as existing machine configuration FOLDING SYSTEM: • Four-side seal / quad bag folding wheel section SEALING AND COOLING SYSTEM: Mechanical press sealing system: Quad seal longitudinal sealing: 2 groups, 1010 mm Quad seal longitudinal cooling: 2 groups, 1010 mm Cross sealing station: 6 sets No. 1: K-seal No. 2: Gusset filling sealing No. 3: Cross seal, 740 mm length / 60 mm width No. 4: Cross seal, 740 mm length / 60 mm width No. 5: Cross seal, 740 mm length / 60 mm width No. 6: Cross cooling, 740 mm length / 60 mm width Additional 5 mm sealing section, upper and bottom PUNCHING SYSTEM: Tear slit / notch puncher 3-hole handle puncher Handle puncher: 20 × 80 mm, 3 sets Hole sizes: • 3 holes Ø20 mm • 20 × 80 mm • 24 × 77 mm Round corner puncher: 2 sets Puncher supports: 3 sets Bottom stick hole puncher: • 12 mm, 8 pcs • 16 mm, 8 pcs Vacuum system for punch waste removal DRIVE SYSTEM: Main motor: 3.5 kW Back draw roller servo: 3.5 kW Front draw roller servo: 3.5 kW Middle draw roller servo: 3.5 kW Longitudinal independent sealing servo: 5 kW × 2 Unwind servo motor: 1.5 kW × 1 / 3.5 kW × 1 Tension control servo: 3.5 kW × 1 Flying knife servo: 1.5 kW × 1 Manipulator sucker drive: 0.75 kW × 1 Finished product carrier counting drive: 0.75 kW × 1 CONTROL SYSTEM: • PLC control • 10” touch screen • Suitable for printed and unprinted bags • 16 temperature control zones • Individual temperature display • Temperature tolerance: ±2°C • High-sensitive eye mark sensor • Adjustable eye mark position STACKING SYSTEM: • Simple type stacking table • Static removal system • Automatic stop when machine stops • Alarm for bag output range: 25–100 bags • Step motor belt control • Belt width: 60 mm • Adjustable batch and belt length SAFETY SYSTEM: • Safety light curtain • Emergency pulling rope • Emergency buttons every 2 meters • Individual emergency control Nedpjzf Nk Tsfx Alhelc INCLUDED OPTION: ZIPPAK transversal zipper attachment Transversal zipper unwinder and rewinder Innolock / Velcro zipper capability Tooling for 3 zipper sizes: • 180–220 mm • 230–300 mm • 310 mm Micro-perforation holes Bottom stick hole puncher Trim rewinders: 3 sets Chiller: 1 set Spare K-type sealing knives: 3 sets

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, type of input current: AC, input voltage: 230 V, We are offering this TBS PACK TAS-0545-AH sealing machine, manufactured in 2019, in very good condition. Manufacturer: tbs-pack GmbH Model number: TAS-0545-AH Serial number: 10004964 Nedpfx Aozg Iuyjlhjlc Voltage: 230 V Frequency: 50 Hz Power: 550 W Year of manufacture: 2019 If you have any questions or require further information, please feel free to send us a message or call us.