Used Knuckle-Joint Press for sale (28,305)

Condition: used, Year of construction: 1981, Barnaul 1000t press in perfect working condition. Nominal force: 1000 ton (≈10,000 kN). ​Slide (ram) stroke: 170 mm. Number of single strokes per minute, not less than: 32 spm Permissible number of double strokes per minute: 18 spm Distance between table and slide at bottom position: 630 mm Adjustment range of distance between table and slide: 16 mm. ​Table size (bolster): 1000 × 800 mm Hole diameter in the slide: 80 mm. Bolster (sub-plate) thickness: 160 mm. Bottom ejector stroke, not less than: 100 mm. Bottom ejector force: 320 kN Gcodpfjx Da Aqjx Ah Dsa Bottom ejector position adjustment range: 25 mm. Top ejector stroke (in slide): 15 mm. Top ejector force (in slide), not less than: 100 kN. Main drive motor power: 40 kW; speed: 930 rpm. Height of press above floor level: 3,470 mm. Overall height: 3,620 mm. Overall dimensions, mm: front to back 2,030; left to right 1,950. Net weight without foundation: 25637 kg.

Condition: ready for operation (used), Year of construction: 1984, Press force: 3600kN, press force stroke: 1.7mm, press work capacity: 6120J. Stroke: 60mm, installation height: 340mm. Table clamping width/depth: 440mm/525mm, tool holder width/depth: 440mm/320mm. Dimensions X/Y/Z: 1300mm/2000mm/2230mm, weight: approx. 6300kg. Gcsdpfx Aor A Eifsh Doa

Condition: used, Capacity : 2000 tons, Stroke : 140 mm, Shut height : 510 mm, Godpfxexy Rvtj Ah Deca Ram adjustment : 25 mm,

Year of construction: 1993, condition: ready for operation (used), Pressing force: 2000kN, max. installation height: 550mm, total power requirement: 72kW, operating pressure: 210bar. Including feed unit. On-site inspection is possible. Gsdpfx Aev Tnytjh Doca

Condition: used, 25/11/2025 Knuckle-joint press A.COLOMBO 1600 ton. Manufacturer Agostino Colombo Model G 1600 Nominal capacity 1600 ton Table size 1060 x 900 mm Stroke 135 mm Gcodpfexbtbzjx Ah Dja Shut height 635 mm Ram adjustment 20 mm Side opening 400 mm Motor 45 HP

Condition: used, 25/11/2025 Barnaul 1000t press in perfect working condition, equipped with a Press Transfer System Tecnomatic Italy. Nominal force: 1000 ton (≈10,000 kN). ​Slide (ram) stroke: 170 mm. Number of single strokes per minute, not less than: 32 spm Permissible number of double strokes per minute: 18 spm Distance between table and slide at bottom position: 630 mm Adjustment range of distance between table and slide: 16 mm. ​Table size (bolster): 1000 × 800 mm Hole diameter in the slide: 80 mm. Bolster (sub-plate) thickness: 160 mm. Bottom ejector stroke, not less than: 100 mm. Bottom ejector force: 320 kN Bottom ejector position adjustment range: 25 mm. Top ejector stroke (in slide): 15 mm. Top ejector force (in slide), not less than: 100 kN. Main drive motor power: 40 kW; speed: 930 rpm. Height of press above floor level: 3,470 mm. Overall height: 3,620 mm. Overall dimensions, mm: front to back 2,030; left to right 1,950. Gjdpfsxqq E Asx Ah Deca Net weight without foundation: 25637 kg.

Condition: good (used), Schmedt PraForm HHS 2100 Book Press with joint forming Book press with groove burner. Machine in perfect condition, purchased from the national library. Practically unused. Produced by Schmedt, Germany. Technical data: max format: 400x 520x 100 mm Weight 250 kg Power supply 380 V + compressed air. Gcedpfx Aewud Tdoh Dea

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 234505A1/0405/33140, Operating pressure 6-8 bar Weight 106 kg Dimensions 0.70 x 0.38 x 1.05 m Notes: Multi-function punch Air consumption 18 l per stroke, Gcodexvp N Dspfx Ah Dea Pneumatic punching process triggered via foot switch

Condition: used, Die PräForm ist eine Maschine zum Einpressen von Büchern nach dem Einhängen und dem gleichzeitigem Einbrennen des Falzes. The PräForm is a machine to press books after casing-in, setting the joint at the same time and processes single books just as well as series of books.  Anpapp-Presse und Falzeinbrennmaschine Schmedt PräForm HHS 2100 Case Press and Joint-Setting machine Schmedt PräForm HHS 2100 Baujahr / Year Serial-Nr. 77 Buchhöhe / Book height: 100 - 520mm Buchbreite / Block width: 120 - 400mm Blockstärke / Block tickness:: 8 - 100mm Leistung / Output: ca. 150 St/h Pressluftanschluss / Air supply: 6bar Elektrischer Anschluss / Power supply: 230V / 50Hz / 2.0kW Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Gcsdpfx Asxgi Hqeh Dsa On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: new, Year of construction: 2025, Corner Jointing Machine EV175 Stable and precise corner joints Gsdpfxjxta Rme Ah Dsca The EV175 combines cost-effectiveness with high corner stability. The ideal machine for all standard profiles and corner brackets.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, overall weight: 360 kg, • Dimensions (W × H × D): 900 × 1,180 × 750 mm • Weight: approx. 360 kg • Drive type: hydropneumatic • Operating pressure: 8 bar • Air consumption: 40 l / stroke at 8 bar • Pressing force: 32 kN at 8 bar • Pneumatic connection: R ¼" • Press stroke: 17 mm • Return stroke: 140 mm • Maximum pressing height: 150 mm • Maximum profile height: 210 mm Gcodpfxexl Hq Ro Ah Doa

Condition: good (used), Year of construction: 1990, machine/vehicle number: 2455, Offer 25293 Technical data: - Max. profile height up to 160 mm - Max. profile width 100 mm - Repetition stroke 100 mm - Punch stroke 20 mm - Punching force at 6 bar: 35 kN - Operating pressure: 6 – 8 bar - Air consumption per cycle approx. 30 l - Equipped with: - Foot switch - 2 vertical pneumatic hold-down devices - Adjustable punching heads - 2 swiveling support arms - Required space approx. W 980 x H 1400 x D 800 mm - Weight approx. 180 kg Gcodpsxdh Uzsfx Ah Dea

Condition: good (used), Schmedt PraForm HHS 2100 book press with joint forming Perfect condition, purchased from a warehouse, used as a backup. Book press with groove burner. Manufactured by Schmedt, Germany. Technical data: max format: 400x 520x 100 mm Weight 250 kg Gsdpfx Ahjwud Tks Deca Power supply 380 V + compressed air.

Condition: new, Year of construction: 2024, universally usable due to double adjustable punching body for corner angles with groove dimensions of 25 - 60mm and profile chamber offset 0 - 40mm steplessly height-adjustable feelers, punching knives and backer inserts stylus and punching body are provided with scales retractable abutment for easy insertion of profiles, self-adjusting when moving forward against the profile hydraulic locking of the backer pneumatic pressing operation via a lever system ensures a synchronous punching process 2 pneumatic hold-down cylinders for clamping the profiles 2 eccentric disks for positioning the frames 2 swiveling profile support arms operation via 2 foot valves Gcodpfx Ahohmfyhs Dsa incl. standard tools

Condition: used, Year of construction: 1981, machine/vehicle number: 9, Anpapp-Presse und Falzeinbrennmaschine Schmedt PräForm HHS 20 Case Press and Joint-Setting machine Schmedt PräForm HHS 20 Baujahr / Year 02/1981 - Serial-Nr. 09 Buchhöhe / Book height: 100 - 520mm Buchbreite / Block width: 120 - 400mm Blockstärke / Block tickness:: 8 - 100mm Leistung / Output: ca. 150 St/h Gcedpfx Ajrmul Djh Doa Pressluftanschluss / Air supply: 6bar Elektrischer Anschluss / Power supply: 230V / 50Hz / 2.0kW Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2000, machine/vehicle number: 124, Falzeinbrenn- und Abpressmaschine - Book press and joint-setting machine Zechini CIMATICYear 2000 - Serial-No. 124/00 Buch Format max. Buchhöhe 48cm x Buchbreite 35cm x Buchblockstärke 9cm Book Size max. height 48cm x width 35cm x thickness 9cm Leistung max 150 in St./h / Output 150 pcs/h Pressluftanschluss 6 bar / Air pressure supply 6 bar Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Godjh Ayanepfx Ah Djca On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 2025, condition: new, Table dimensions 1000 x 400 mm pneumatic clamping 4 Stk. moveable ja_yes ja loading dimensions L x W x H 1200x800x1200 mm weight 220 kg For fast compression of Minizinken- or Softline compounds especially for larger cross-sections - Independent of the angle - Especially suitable for arched manufacturing - Table size 1000 x 400 mm - Pneumatic connection 10 bar Gcodpfjx Ak Hqsx Ah Dja - Air consumption 1 cdm / stroke - 4 clamping cylinders for workpiece clamping - Pairs switchable - Right half of the table supported on hardened shafts through ball linear bearings - 2 pressure cylinder for linear table displacement, separately switchable - Weight: 200 kg - CE - execution (Technical details according to manufacturer - without guarantee.!)

Condition: refurbished (used), Refurbished DKV III through-feed press with brake unit Optionally with original hydraulic motors or conversion to servo motors Options: - Chain threading - Traveling cross-cut saw Gcodpfxev T Aqye Ah Dja Function: For pressing finger joints without stopping (in through-feed). The upper and lower plate chains generate feed force. Downstream brake plates transmit the required longitudinal pressing force to the wood through friction. Advantages: - High performance despite relatively slow feed rate - Absolutely no vertical tine offset of the finger joints Technology: Heavy 2" plate chain, pneumatically raised and lowered Floating brake elements Pressing force measurement via contact pressure gauge Electric height adjustment Maximum pressing force adjustable and dependent on feed speed and wood cross-section: 4500 daN at 32 m/min 2200 daN at 70 m/min Adjustable feed speed: 10-70 m/min Drive power: Feed unit adjustment: 1 kW Brake adjustment: 1 kW Hydraulic motors: 45 kW Technical specifications: Log width: 90 - 180 mm Log thickness: 20 - 80 mm Thickness to width ratio: 6:10 Maximum wood cross-section with 15/16.5 mm tines: 90 cm²

Condition: new, MECHANICAL SCREW PRESS FOR STACKING U-JOINTS PRK-2 Designed for staking u-joints as well as assembly and dissasembly of driveshafts during repair and remanufacturing process Press can be used for the assembly and replacement of cardan joints in the repair and production of cardan shafts, as well as for other processes in which the pressing operation is used. This press is designed for use in a repair shop and does not require any special knowledge for operation and maintenance. Manual feed ensures precision and quality of stacking process. The pressing mechanism is based on a ball screw, which has a high efficiency and a long service life. Technological tooling for replacing stacked u-joints: • Centering housing for the punches. • Set of 8 bits for punching crosses with diameters from 20 to 31 mm for drive shafts. • Set of 4 bits for punching crosses with diameters from 15 to 19 mm for steering shafts. SPECIFICATIONS Working area (L x B x H) 322х312х350 mm Maximum compression force 5500 kg Gedopbwdlspfx Ah Dsca Maximum force on rupture 2000 kg Dimensions (length x width x height) 402х488х1478 mm Weight 160 kg ! We manufacture а full range of equipment for drive shaft balancing and repair service. Please contact us to get the best offer!

Year of construction: 2025, condition: new, Dimensions (L/W/H) 1300x800x1350 mm Weight 370 kg Gcjdpfov A E Nksx Ah Dja Total power requirement 0 kw

Condition: reconditioned (used), Year of construction: 2007, Available Immediately: Semi-Automatic Line for Finger-Jointing Wooden Elements Up to 6 Meters in Length The line has undergone a complete overhaul. The finger jointer is equipped with a table featuring a conveyor belt and an additional rotary table. This setup simplifies and speeds up machine operation, thereby increasing efficiency. Gcodpetyy Exefx Ah Dja A new glue nozzle for automatic glue application and a new saw-chipper are included. The press has a fixed jointing length of 6 meters. Finger Jointer Technical Specifications: • Spindle diameter: 50 x 210 mm • Spindle speed: 5,500 rpm • Motor: 15 kW • Tool dimensions: 250 x 150 mm • Special chipper: 300 x 8 mm • Motor: 6 kW / 3,000 rpm • Infinitely variable feed table • Working width x height: 600 x 30 x 150 mm Hydraulic Press: • Working length: 6 meters • Lamella width up to 160 mm, thickness up to 80 mm, gluing length per cycle: 6,000 mm • Number of pneumatic pistons: 4 (2 from above, 2 from below) • Air pressure: 5–8 bar • Air consumption: 300 l/cycle • Saw blade diameter: 300 mm • Spindle diameter: 30 mm • Motor power: 1.5 kW • Saw movement: pneumatic Dimensions (L x W x H): 7,700 x 1,160 x 1,500 mm Weight: 1,500 kg Optional services for an additional fee: installation, commissioning, and training on machine operation.

Condition: refurbished (used), pressing force: 10 t, working height: 805 mm, total length: 1,700 mm, Finger jointing press Finger jointing press Cycle press for finger joint connections Pressing force: 10 t Gcodpfxjt Sc Sws Ah Dja Hydraulic finger jointing cycle press Wood width: 80-280 mm Wood thickness: 18-80 mm OPTIONAL with hydraulic unit 300 ltr and 5.5 kW motor, manufacturer GOD with electrical system

Condition: repair required (used), Year of construction: 1993, machine/vehicle number: 624/9, pressing force: 10 t, working height: 805 mm, total length: 1,900 mm, Indexing press for finger joints Finger jointing press Gcodpot Sc T Isfx Ah Dja Finger jointing press Pressing force 10 t Wood width 80-300 mm Wood thickness 18 - 80 mm OPTIONAL with hydraulic unit

Condition: repair required (used), Year of construction: 1994, functionality: limited functionality, machine/vehicle number: 6305/7, pressing force: 15 t, working height: 905 mm, total length: 1,900 mm, pressing force 15 t line consisting of : feed rollers with servo drive press 15 t inclusive hydraulic unit feed rollers with servo drive saw >>without electrical equipment Gcsdpfsg T Spajx Ah Doa

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, total height: 5,000 mm, pressing force: 200 t, total length: 4,300 mm, installation height: 5,000 mm, total width: 2,250 mm, clearance between the columns: 1,000 mm, table length: 850 mm, operating pressure: 250 bar, spindle diameter: 400 mm, reverse speed: 567 mm/s, table width: 800 mm, year of last overhaul: 2018, overall weight: 16,800 kg, stroke length: 200 mm, space requirement length: 4,300 mm, space requirement height: 5,000 mm, Equipment: airbag, crane, Refurbished and Automated Mecolpress 200L Hot Forging Press (Siemens S7 Controlled) We are offering for sale our Mecolpress 200L fully automatic hot forging press system, which is currently operating in our production line. The machine underwent a comprehensive overhaul and modernization in 2018. The system has been upgraded to meet current production standards, including a renewed electrical system and a complete automation package. It is fully operational and immediately ready for production. Main Features and Benefits - Complete Overhaul: All mechanical and hydraulic components have been serviced, worn-out parts replaced, and the machine's performance restored to factory specifications, ensuring long-lasting and reliable operation. - Modernization (Siemens S7): The electrical system has been completely renewed with Siemens S7 PLC and latest-generation automation components, enabling precise control, easy fault detection, and modern production monitoring. - Fully Automatic Cell: All processes from furnace loading to forging and unloading are fully automated, minimizing human intervention and increasing productivity. - Complex Part Manufacturing: The 5-axis AP4 sub-press unit allows production of parts with complex internal geometries (such as valve bodies, Y-fittings, etc.) that cannot be manufactured with standard presses. - Production Ready: The machine is currently in active operation and will be delivered to the buyer with a custom die set (flange and 4 inserts). Gcodpfxsx E Unts Ah Dea Technical Data - Pressing Force: 200 Tons - Strokes per Minute: 85 - Ram Stroke: 200 mm - Table Dimensions: 850 mm x 800 mm - Distance Between Columns: 1,000 mm - Pneumatic Cushion Force: 17.5 Tons - Total Weight: 16,800 kg - Main Motor Power: 25 HP Included Equipment The system is sold as a complete cell: - Mecolpress 200L Press (Refurbished, Siemens S7 controlled) - CP mod. 140-4P Heating Furnace (automatic loading conveyor, 4-guide system) - AP4 Sub-Press Unit (5th axis/angled punching capability) - Complete Rotary Automation System (loading arm, IR sensors, grippers, unloading spoon, lubrication system) - Custom Die Set (including flange and inserts as per your drawing) Since the machine is actively in production, it can be inspected by appointment and tested under working conditions.