Used Professional Extreme 750 for sale (10,032)

Condition: new, Year of construction: 2025, pressure 060 t stroke 350 mm table surface area 750x344 mm dayligth 197/750 mm distance between columns 750 mm Dodpfxexu Nvzj Afpsun diameter of piston 75 mm

Year of construction: 2014, condition: excellent (used), Oven volume: 2.366 m³ l Max. temperature: 750 °C Connected load: 84 kW Dujdpfx Afeydl Iaepon Weight: 3.7 t

Condition: excellent (used), Year of construction: 2014, operating hours: 47,137 h, functionality: fully functional, machine/vehicle number: 61020607, clamping force: 1,300 kN, clearance between the columns: 470 mm, Here we offer the following well-maintained used injection moulding machine as part of our injection moulding machinery dealership. Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Current Notice – Tax Advantage for Used Machinery Starting from 01.07.2025, used machines may also benefit from a special depreciation allowance of 30% per year for tax purposes. In addition to the lower purchase price compared to a new machine, you can claim the same depreciation amounts as with new equipment. Keyword: Growth Booster (§ 7 Sec. 2 EStG-E). Manufacturer: Krauss Maffei Model: KM 130 750-130 CXV BluePower, 2-Color/2-Component Machine Control System: MC6 Year of Manufacture: 2014 Machine No.: 61020507 Operating Hours: 47,137 h 1st Injection Unit: 750 horizontal Injection unit/screw diameter: 50 mm Shot volume: 393 ccm Shot weight: 357 g Heating power: kW Heating zones: 5 Nozzle stroke: mm Injection pressure: 1892 bar 2nd Injection Unit: 180 vertical Injection unit/screw diameter: 30 mm Shot volume: 85 ccm Shot weight: 77 g Clamping Unit Clamping force: 130 t / 1300 kN Opening stroke: 600 mm Tie bar distance: 470 x 470 mm Platen size: 745 x 770 mm Max platen spacing: 900 mm Min. installation height of mould: 300 mm Ejector stroke: 150 mm / Ejector force: 23 kN Dujdeyf Uy Uepfx Afpen Weight: 9,000 kg Extras Nozzle side: Needle shut-off A+C; 1 x hydraulic core pull 1 x pneumatic core pull 1 x air blow-off Ejector side: 1 x hydraulic core pull 3 x pneumatic core pulls 1 x air blow-off Cooling water BGS with 6 circuits each on nozzle and ejector sides BluePower Technology: up to 40% energy savings The machine has been very well maintained and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Delivery terms: free loaded onto buyer's truck, or free delivered to site against reimbursement of freight costs. Further information about the machines we offer and our company: - All machines we sell are purchased from ongoing production for our own stock in Hannover. - Every machine is inspected and tested before dismantling. - We do NOT deal in insolvency assets, nor do we act as brokers dealing with third-party goods. - All machines come from successful enterprises where regular maintenance and servicing are the standard. - All machines offered can be inspected at our warehouse.

Condition: used, Year of construction: 2026, TYTAN 750 PRO 400V universal lathe. The lathe is designed for machining external and internal cylindrical surfaces, thread cutting, drilling, countersinking and reaming holes. It is usually used in small industrial plants, workshops, garages, etc. Machine description The TYTAN 750 VARIO PRO lathe, thanks to the smooth spindle speed adjustment, is an ergonomic machine that responds to the user's needs. Reducing the time it takes to set up the machine while machining parts of a wide range of sizes translates into efficiency and ease of use. Main advantages: + A modern motor with smooth spindle speed regulation ensures comfort of use and shortens the calibration time. + The LCD screen with the spindle speed display allows you to control and quickly modify the spindle speed while setting the cutting and tapping modes. + Two spindle speed ranges: reduced (50-1250) for machining hard steels and increased (100-2500) for high-speed precision turning. + Threads cut: metric - 18 degrees (0.2-3.5), inch - 21 degrees (8-56) left and right threads can be cut. + The automatic longitudinal feed has 6 speed ranges (0.07 to 0.40) mm / rev. - thanks to it, the machining time is much shorter, which does not deteriorate the quality of work when turning long parts. + The TYTAN 750 vario PRO lathe, thanks to the smooth spindle speed adjustment, is an ergonomic machine responding to the user's needs. Reducing the time it takes to set up the machine while machining parts of a wide range of sizes translates into efficiency and ease of use. + The machine is fully compliant with the requirements of EU directives (CE) as well as Polish regulations and DIN standards. Dodpfxeygtrrj Afpeun Technical parameters dimensions Turning diameter over bed 250 mm Turning diameter over cross slide 150 mm Claw spacing 750 mm Bed width 135 mm Spindle passage 27 mm Spindle taper MK4 Spindle speed adjustment smooth Spindle speed 50-1250 | 100-2500 rpm Number and range of metric threads (18) 0.2-3.5mm / rev Number and range of inch threads (21) 8-56 zw./cal Number and range of feeds 0.07-0.4mm / rev Top slide travel range 70 mm Maximum cross slide travel 135 mm Maximum travel of the longitudinal slide 650 mm Maximum tool size 16 x 16 mm Feed the tailstock sleeve 60 mm Tailstock taper MK2 Handle size 125 mm Spindle motor 1.1 kW L / W / H 1,350 x 560 x 1,250 mm Weight 170 kg WARNING! THE MACHINE HAS A MANUFACTURING DEFECT: THE BED IS NOT HARDENED.

Condition: like new (used), Year of construction: 2024, Table size 1630 x 760 mm, table load 1500 kgs, Traverses XYZ 1630 x 762 x 650 mm, Dusdpfxsyia Ups Afpsn rapid feedrates 30m/min, Spindle power 18.5 Kw, spindle speed 12,000rpm, 30 station ATC, spindle taper BT40, through spindle coolant, swarf conveyor, Fanuc i series control.

Condition: used, Year of construction: 2023, An as new 2023 and hardly used, XYZ TMC 750 Toolroom VMC with RMX wide screen control, additionally specified with: Advance Features RMX, Tacking including retractable Electronic Handwheels, and DXF Converter - cost in excess of £50,000 + VAT when new! Specification: Working Area 743 x 425 x 489mm Table Size 830 x 410mm Spindle Centre to Column 500mm Spindle to Table 100 - 600mm Column Front to Table Centre 305 - 745mm Rapid Feedrate 20 M/min Cutting Feedrates 1 - 20,000 MM/min Max Table Load 500kg T Slot Size 16mm T Slot Number & Pitch 3 off @100mm Spindle Speeds 5 - 8,000 rpm Spindle Motor 11kW (15hp) Spindle Taper BT40 20 Station Carousel ATC Chip to Chip Tool Change Time 8 secs Max Tool Diameter 100mm Max Tool Weight 7kg Duodpfxoyh Ixmo Afpon Coolant Tank Capacity 125L Ballscrew (Grade C3) 32mm Dia P8 AC Servo Motor Max Torque X = 5 Nm / Y = 5 Nm / Z = 10 Nm Machine Weight 3,500kg Footprint 2,392 x 2,460 x 2,670m

Condition: excellent (used), functionality: fully functional, load capacity: 750 kg, Equipment: foot remote control, APS welding rotary table DSE 750 kg Speed continuously variable from 0 - 1.7 rpm. Duodpfjv A Rppjx Afpjn Length 1250mm, width 1550mm, height 940mm Height from floor to center of hole min. 500mm, max. 780mm Diameter of clamping disc 600mm Hollow shaft or hole 110mm

Condition: ready for operation (used), load capacity: 750 kg, 3-axis welding positioner, 750 kg load capacity, control panel Djdpfexxvgzjx Afpoun Tilt and speed infinitely adjustable from 0.05 to 1.0 rpm Clamping plate diameter: 0.8 meters Height when tilted to center min. approx. 0.45 m + 0.1 m base, max. 1.1 + 0.1 m base Height horizontal min. approx. 0.56 m + 0.1 m base Length 2.0 m, width 1.05 m

Condition: used, Year of construction: 2017, Serial No. 138264-100, control system type Unilog B8, clamping force 1,800 kN, clear tie bar spacing 570 x 520 mm, mould installation height 225 - 550 mm, opening stroke 480 mm, maximum platen distance 1,030 mm, ejector stroke hydraulic/electric 180/160 mm, ejector force 40 kN, dry cycle time 1.7 s per 364 mm, maximum mould weight 1,800 kg, minimum mould dimensions 346 x 346 mm, injection unit type 750, screw diameter 45 mm, screw stroke 200 - 225 mm, L/D ratio 22, 1 hydraulic core pull, theoretical shot volume 193 - 442 cm³, specific injection pressure 1,714 - 3,000 bar, maximum screw speed 325 rpm, screw torque 900 Nm, nozzle stroke/force 350 mm/40 kN, dosing unit by Movacolor, injection/dosing unit by Wittmann, type Feedmax S3-NET, year 2021, sprue picker/robot by Wittmann, type WP80, year 2021, travel X/Y/Z 100 x 550 mm x 90°, compressed air hose reel by Metabo, type SA250, length 25 m, machine weight 7,200 kg, operating hours 46,038. This item is part of an online auction. The sale is subject to the approval of the seller. Dsdpfxsyc Sh Do Afpjun

Condition: used, Year of construction: 1990, Technical details: adjustment drive of the grinding de: 0,0025 - 0,05 mm Dujdsvnmnropfx Afpsn total power requirement: 100 kW adjustment of grinding head slide: 150 mm weight of the machine ca.: 17 t grinding spindle drive: 2 x 37 kW grinding width: 30-150 mm peripheral speed: 34 m/sec workpiece speeds: 60 - 300 mm/Sek. grinding height: 70 mm grinding wheel diameter: 750 mm grinding tools: 750 x 75 x 350 mm grinding wheel turning speeds: 870 U/Min. max. workpiece diameter: 250 mm

Condition: good (used), Year of construction: 2023, functionality: fully functional, Machine Parameters: Swing diameter over bed: 750 mm Maximum turning length: 4000 mm Swing diameter over cross slide: 560 mm Description: The machine is in good technical condition and can be inspected by prior arrangement. The machine was installed in 07/2023 and has seen very little use. Total operating hours are 3900, of which the spindle has run for 540 hours. Swing diameter over bed: 750 mm MACHINE SPECIFICATIONS: STYLE 750 Model: STYLE 750 Swing diameter over bed: 750 mm Swing diameter over cross slide: 530 mm Distance between centers: 4000 mm Bed width: 450 mm Maximum load between centers: 1800 kg Dedpeyg R Tgsfx Afpjun Maximum load with fixed steady rest (type U): 2500 kg Main Spindle: Spindle motor power (S6): 26 kW Maximum spindle speed (number of speed ranges): 2000 rpm (3) Spindle bore: Ø105 mm Spindle nose: A2-11 X and Z Axis: Ball screw diameter X axis: 32 mm Ball screw diameter Z axis: 50 mm Rapid traverse: 8 m/min Feed range: 0.01-2000 mm/min Tailstock: Quill diameter: 125 mm Quill travel: 225 mm Quill taper: MT 6 General: Machine weight: 8150 kg Machine color: Frame RAL 7021, Panels RAL 9006 Machine dimensions: 6.3 x 2.3 x 2.2 m The machine will be supplied with: - Machine lighting: LED - Coolant system - Automatic lubrication - Steel ball screw covers - Full enclosure - Front sliding doors - Electronic handwheel - Constant cutting speed, chip conveyor Including additional equipment: - Automatic tool changer, 8 positions, VDI-50 - Heavy-duty tailstock, desktop PC software version - 26 kW main motor, handwheel, oil separator - Steady rest D50-300mm, steady rest D60-400mm - Coolant pump switch - 3-jaw chuck D315 – Schunk Rota S Plus2.0 - Speed potentiometer - LED lamp, LAN, heavy-duty coolant system with spray gun Swing diameter over cross slide: 530 mm Distance between centers: 4000 mm Bed width: 450 mm Maximum load between centers: 1800 kg Maximum load with fixed steady rest (type U): 2500 kg Main Spindle: Spindle motor power (S6): 26 kW Maximum spindle speed (number of speed ranges): 2000 rpm (3) Spindle bore: Ø105 mm Spindle nose: A2-11 X and Z Axis: Ball screw diameter X axis: 32 mm Ball screw diameter Z axis: 50 mm Rapid traverse: 8 m/min Feed range: 0.01-2000 mm/min Tailstock: Quill diameter: 125 mm Quill travel: 225 mm Quill taper: MT 6 General: Machine weight: 8150 kg Machine color: Frame RAL 7021, Panels RAL 9006 Machine dimensions: 6.3 x 2.3 x 2.2 m The machine will be supplied with: - Machine lighting: LED - Coolant system - Automatic lubrication - Steel ball screw covers - Full enclosure - Front sliding doors - Electronic handwheel - Constant cutting speed, chip conveyor Including additional equipment: - Automatic tool changer, 8 positions, VDI-50 - Heavy-duty tailstock, desktop PC software version - 26 kW main motor, handwheel, oil separator - Steady rest D50-300mm, steady rest D60-400mm - Coolant pump switch - 3-jaw chuck D315 – Schunk Rota S Plus2.0 - Speed potentiometer - LED lamp, LAN, heavy-duty coolant system with spray gun

Year of construction: 2012, condition: ready for operation (used), screw diameter: 55 mm, This Engel victory 750/160 Spex was manufactured in 2012. It is a hydraulic injection moulding machine featuring core pull, an ejector plate safety device, a 1/2" air valve, and a 10-way water distributor. Consider the opportunity to buy this Engel victory 750/160 Spex hydraulic injection moulding machine. Contact us for more information. • 2 units available • Machine 1: 29,462 hours • Machine 2: 28,713 hours • Core pull • Ejector plate safety device • Air valve 1/2" Additional equipment Djdpfx Ajx D I Egjfpjun • 10-way water distributor

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 750 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 500 mm, controller manufacturer: HAAS, table load: 340 kg, spindle speed (max.): 8,000 rpm, number of axes: 4, This 4-axis HAAS MIKRON VCE 750 was manufactured in 1997. It features a table surface of 900x350 mm, a table capacity of 340 kg, and movements of X 750 mm, Y 410 mm, and Z 500 mm. The spindle operates at 8000 rpm with a power of 7.5 kW. Regular maintenance and recent updates ensure reliability. Consider the opportunity to buy this HAAS MIKRON VCE 750 vertical machining centre. Contact us for more information about this machine. • Table surface: 900 x 350 mm • Condition: regularly maintained; still in operation • 2023 service: new tool change hand gearbox and new tool change magazine Dsdpjx D Egzsfx Afpoun Additional equipment • 4th axis

Year of construction: 2010, condition: ready for operation (used), screw diameter: 55 mm, This Engel 750/160 Spex was manufactured in 2010. It is a hydraulic injection moulding machine featuring a 55mm screw diameter, core pull, ejector plate safety device, and a 6-way water distributor. If you are looking to get high-quality moulding capabilities, consider the Engel 750/160 Spex machine we have for sale. Contact us for more information. • Units available: 2 Duedox D I Eaepfx Afpsn • Machine 1 hours: 35,066 h • Machine 2 hours: 38,769 h • Core pull • Ejector plate safety device • Air valve 1/2" • Water distributor: 6-way

Condition: good (used), Year of construction: 2004, operating hours: 15,660 h, functionality: fully functional, color: orange, For sale: Doppstadt DZ 750 Kombi – slow-speed shredder + high-speed chipper. The machine is accident-free. - Year of manufacture: 12/2004 - Mercedes-Benz diesel engine - Operating hours: 15,660 mth - Weight: 46 t - Magnetic separator - Possibility to use different shredding screens Dusdpfjygr Tnsx Afpsn - Machine after inspection/service - Tyre condition: 70% - Tyre size: 385/65R22.5 - Easy operation The machine is in continuous use. Please contact for further information.

Condition: new, Year of construction: 2026, Shredding shafts for Hammel 750 – various configurations possible 8/5 – 8/6 - for mixed waste - for wood - for light metal - special shafts Duodpjyf Uzrsfx Afpon - others

Condition: ready for operation (used), Year of construction: 2000, A Pemat pan mixer for concrete is available. Volume: 750l, max. filling weight: 1200kg, hardened concrete output per batch: 500l, grain size range: 0-65mm, mixing trough diameter: 1900mm, mixing trough height: 700mm, drive power: 30kW, weight: approx. 3000kg. On-site inspection is possible. Duedpevkgizjfx Afpen

Year of construction: 1996, condition: ready for operation (used), Offered is a cleaning and degreasing system with steam extraction fan and oil skimmer, year of construction 1996, basket: Ø720mm, internal height: 140mm, workpiece: maximum usable height: 450mm, maximum batch weight: 500kg, overhaul: 2011: completely overhauled, renewed: gear motor, heater, gas spring and heating elements, documentation: operating manual, technical documentation and CE declaration of conformity available, overall dimensions X/Y/Z: 1190mm/1170mm/1170mm, weight: approx. 290kg. Inspection: possible by appointment. Dusdpfx Aex Ect Isfpen

Condition: ready for operation (used), Tray dimensions X/Y 1: 250mm/180mm, tray dimensions X/Y 2: 357mm/265mm, max. film width: 400mm, packaging output: approx. 6–8 cycles/min. Machine dimensions X/Y/Z: approx. 5000mm/900mm/2000mm, weight: approx. 800kg. Documentation available. An on-site inspection is possible. Dedpfx Ajxtfgaefpeun

Year of construction: 2005, condition: ready for operation (used), Flange diameter: 160mm, clamping force: 1600kN, tie bar distance: 520mm/520mm, min. mold diameter: 350mm, min. mold installation height: 300mm, opening stroke: 650mm, platen distance: 950mm, ejector stroke: 150mm. Screw diameter: 45mm, injection pressure: 2336bar, stroke volume: 318cm³, nozzle radius: 15mm, injection volume: 134cm³, injection weight: 289g. Machine dimensions X/Y/Z: approx. 4900mm/1600mm/2200mm, weight: approx. 7400kg, operating hours: approx. 71187h. The machine has an unknown defect. Documentation available. An on-site inspection is possible. Dsdpfx Asuabq Tjfpoun

Year of construction: 2009, condition: ready for operation (used), A complete Grieser vacuum dissolver system for the production of homogeneous paste mixtures is available. 1) High-performance vacuum dissolver Grieser GFVD 750 FU, year of manufacture: 2009, drive power: 75kW, mixing shaft speed: 1500rpm, total volume: 550l, mixing volume: 400l, mixing tool diameter: 450mm, vacuum output: 160m³/h, weight: approx. 2800kg. 2) Fluidizing container Grieser FB 2000, year of construction: 2009, total volume: 2000l, usable volume: 1300l, emptying capacity: 10l/min, discharge speed: 0.9m/s, weight: approx. 2000kg. 3) Big bag emptying station. 4) Pump system for liquid components, type: IBC, number of IBCs: 4, volume: 1000l. 5) Centrifugal fan V30/2, volume flow: 410m³/h. Documentation available. On-site inspection is possible. Dusdpfx Ajwtg Ihefpjn

Year of construction: 2015, condition: ready for operation (used), A CNC milling machine Spinner is available. Travel X/Y/Z: 760mm/460mm/460mm, table dimensions X/Y: 900mm/410mm, max workpiece weight: 350kg, tool stations: 24, max tool weight: 8kg, max tool length: 200mm, speed: 12000rpm, max tool diameter: 80mm, tool holder: SK40. Machine dimensions X/Y/Z: approx. 2600mm/1600mm/2850mm, weight: approx. 4000kg. Including automation and robot M10. Documentation available. An on site inspection is possible. Dsdpfx Afjxwn I Uspoun

Year of construction: 2015, condition: ready for operation (used), Heating surface: 3200x1480mm, 2x heating plate dimensions: 2120x1480/1060x1480mm, max. temperature: 180°C, connected load: 17.8kW, length: 3300mm, width: 1650mm, height: 1100mm, weight: 887kg. Elements: insulated lid, lid handle, quick-release clamps, industrial rollers with stoppers, electrical switch box/control panel, U-shaped support rails, signal light tower, POWER signal light, on/off timer switch, digital timer, temperature control unit left heating plate, temperature control unit right heating plate, on/off switch left heating plate, on/off switch right heating plate, RESET push button, EMERGENCY STOP switch, signal light circuit breaker (BREAKER), main switch. With documentation. An on-site inspection is possible. Dedpfx Aow S Tx Ajfpjun

Condition: excellent (used), Year of construction: 2014, operating hours: 43,500 h, functionality: fully functional, machine/vehicle number: 194413, clamping force: 2,200 kN, screw diameter: 55 mm, displacement volume: 475 cm³, injection pressure: 1,578 bar, injection weight: 440 g, mold height (min.): 300 mm, ejector stroke: 180 mm, opening stroke: 750 mm, overall weight: 12,740 kg, heating capacity: 13.4 kW (18.22 HP), Here, as a specialized dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine: As part of our business, we also purchase well-kept injection moulding machines from model year 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Important Tax Information – Special Depreciation Benefits for Used Machines From 01/07/2025, used machines can also be tax-deducted in Germany with a special depreciation of 30% per year. In addition to the lower purchase price compared to a new machine, you can apply the same depreciation allowances as for new machinery. Keyword: Growth Booster, (§ 7 Paragraph 2 EStG-E) Manufacturer: Engel Model: VC 750 / 220 Control system: CC200 Year of manufacture: 2014 Machine No.: 194413 Operating hours: 43,500 h Injection Unit - Screw diameter: 55 mm Dusdpsyc Ewxjfx Afpjn - Shot volume: 475 ccm - Shot weight: 430 g - Heating capacity: 13.4 kW - Heating zones: 5 - Nozzle stroke: 350 mm - Injection pressure: 1179 bar (up to 1578 bar increased) Clamping Unit - Clamping force: 220 t / 2200 kN - Opening stroke: 757 mm - Max platen distance: 1050 mm - Min mould installation height: 300 mm - Ejector stroke: 180 mm / Ejector force: 80 kN Weight: 12,740 kg Extras - Core pull The machine is in excellent condition and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Delivery terms: - Free loaded onto buyer’s truck or delivered free to site against reimbursement of freight costs Information about our machines and company: - We only sell machines we have purchased from active production, stocked at our Hanover warehouse - All offered machines are tested and inspected before dismantling - We do NOT sell insolvency assets or act as brokers dealing in third-party property - All machines originate from successful, well-maintained operations - All machines offered can be inspected in our warehouse

Condition: used, Year of construction: 2018, Nominal flow rate: 5087 m³/h Negative pressure Pa: 2300 Motor: 7.5 kW Dimensions: 1080 x 820 x 860 mm Weight: 154 kg Storage location: Nattheim Djdpfx Afsvxk Anepjun