Used Profiling Lathe for sale (11,114)

Year of construction: 1997, condition: like new (used), UNDER FLOOR WHEEL LATHE RAFAMET UGB 150 Underground lathe for reprofiling train wheels without necessary disassembly Truck guage: 1435 mm Range of wheel tread diameters: 600 to 1,500 mm Maximum axle load: 250 kN Minimum wheel base: 1,700 mm Crjdpog R Syhefx Aptjg Machine is from 1997 Dismantled, ready for shipment.

Condition: like new (used), Year of construction: 2023, operating hours: 400 h, functionality: fully functional, machine/vehicle number: 2022LW160, High-speed roll forming line, equipped with tooling for the production of GELAN and SCHUCO metal profiles used in PVC window frame manufacturing. Machine achieves speeds up to 55 m/min with 6 m profile length production. Maximum processable material thickness is 2.5 mm. Upper and lower shaft diameter is 60 mm, the width between the stands is 360 mm, and each station is driven by an individual gearbox with two cardan shafts. Both upper and lower shafts are driven at each station. The line features 15 forming stands plus two straightening stands (Turkish heads). All forming rollers have a surface hardness of 62 HRC. Additionally, all auxiliary rollers and shafts in contact with the material are induction-hardened to 58–62 HRC (including run-out table rollers and horizontal accumulator rollers). A flying cut servo positioning system (DELTA 7.5 kW servo motor, ball screw, and linear guides) facilitates precise length adjustments via HMI. Hydraulic cutting system included. The run-out table features an automatic profile kickout, conveying, and separation system for continuous production without stopping. The horizontal entry accumulator for strip material ensures uninterrupted production, equipped with pinch rollers and individual drives. Double-sided hydraulic decoiler included. The line is equipped with a continuous ink-jet marking system from KONING (Germany). The automatic stacking system is not installed (see photos). Csdsyw Rzajpfx Aptorg The machine features recirculating cooling and lubrication across all 15 stations. Electronics: SIEMENS (PLC, contactors), SCHNEIDER (contactors), DELTA (Taiwan drives and servo). Main electric motors by Siemens. Bearings by SKF. The mechanical frame is stress-relieved and milled for precision. The machine has only been used for test production, having processed just 250,000 m of material (machine is nearly new). It is installed and connected to power; test runs can be arranged on-site. The listed price refers to the machine disassembled and loaded onto a truck. Included is comprehensive documentation with detailed tooling setup instructions for each profile (including detailed assembly drawings of rollers). Model: LW160 Supply voltage: 380 V Installed power: 73.5 kW (consumes only 40% of power when processing 2 mm strip) Frequency: 50 Hz Weight: 16,500 kg Current: 160 A Serial number: 2022LW160 Year of production: 2022 Year of on-site assembly: 2023

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 0520090257, center height: 230 mm, spindle bore: 58 mm, swing diameter over cross slide: 270 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 30 rpm, type of input current: three-phase, swing diameter over bed slide: 460 mm, turning diameter over cross slide: 270 mm, overall weight: 1,810 kg, turning diameter: 460 mm, turning diameter over bed slide: 460 mm, input voltage: 400 V, rotational speed (min.): 30 rpm, rotational speed (max.): 2,000 rpm, total height: 1,370 mm, total length: 2,750 mm, total width: 1,080 mm, bed width: 300 mm, quill diameter: 60 mm, quill stroke: 130 mm, distance between centers: 1,500 mm, workpiece length between centers: 1,500 mm, Torno Mecânico Convencional C6246VX / 1500mm - Ano 2020: Torno mecânico universal com 460mm de giro sobre a bancada e 1500mm entre pontas. Motor trifásico 400V/50Hz. Equipado com visor digital (DRO) de 2 eixos, torre porta-ferramentas de mudança rápida, sistema de refrigeração e proteção de segurança articulada no fuso. Máquina em bom estado de conservação, adquirida em 2020 e utilizada em ambiente de I&D. Ideal para oficinas de manutenção, ferramentaria ou produção de pequenas/médias séries. O comprador deve organizar/tratar da recolha. IVA incluído no preço Conventional Mechanical Lathe C6246VX / 1500mm - Year 2020: Crodpozxrkiefx Aptog Universal mechanical lathe with 460mm swing over bed and 1500mm between centres. Three-phase motor, 400V/50Hz. Equipped with a 2-axis digital readout (DRO), quick-change tool post, coolant system, and a hinged safety guard over the spindle. Machine in good condition, purchased in 2020 and used in an R&D environment. Ideal for maintenance workshops, toolrooms, or small/medium-batch production. Buyer must arrange collection. VAT included in price.

Condition: used, Lang Centre Lathe, Approx 7.6m Between Centres x 800mm Swing Over Bed, 400mm Swing Over Saddle, Fitted with 4 Jaw Chuck (750mm Diameter) , 2 Fixed Steadies Crodpfszvrn Nox Aptjg

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm Cjdpfx Aoxdmgvjpterg CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 1,000 mm, total length: 1,100 mm, total height: 550 mm, input voltage: 220 V, working width: 600 mm, infeed width: 650 mm, spindle motor power: 1,100 W, warranty duration: 24 months, power: 1.2 kW (1.63 HP), Equipment: CE marking, emergency stop, type plate available, DESTEK MAKİNE is the first and only company to establish a production facility in its field in Türkiye. All machines and hand tools we sell are produced in our own workshops using state-of-the-art CNC machinery from design to final product. With the strength we gain from production, we have been providing products and services to our valued customers in the standing seam roof & facade cladding sector for over 10 years. By conducting a thorough needs analysis with a customer-first approach, we bring all global technological innovations to our country simultaneously. Therefore, our vision can be summarized as: “ Whatever is Manufactured in the World, DESTEK MAKİNE can Produce the Same or Even Better ” With a solution-oriented engineering approach, an experienced team of experts in the field, and a reliable service network, we are here whenever you need us. Our company guarantees 100% customer satisfaction. Our commitment to quality is certified by: CE Conformity Certificate ISO 9001 ISO 14001 Crsdpfxjwzzlwj Aptog ISO 10002 ISO 45001 Every manufactured "DESTEK" standing seam machines goes through delicate tests. "DESTEK" Features - Standard standing seam height 25 mm - There is no problem of oil canning when working with the machine. - Automatic Cutting Guillotine (Standart) - Ribbing Attachments (Standart) - Dijital Counter (Standart) - Cabled Remote Controller (Standart) - Emergency Stop Button (Standart) - Forward and backward button (Standart) - Wrench Sets that will be required during use (Standart) - Weight: 260 kg - You can transport with small cars - You can lift it to the roof easily - You can seperate it to four pieces for carrying easily (Standart) - Material width adjusment (180 mm – 650 mm) (Standart) Please contact us for more information and prices.

Condition: excellent (used), Model: 4M/65E Condition: Very good Dimensions: 80.00 (H) x 60.00 (W) x 120.00 (L) inches Additional Description: Cjdpexz Tfajfx Aptorg - Automatic copy lathe - To make spades, shovels, curling's, gun holders, axes, legs, cricket bats and so on. - Makes 4 pieces at the same time. - Router (no sanding attachment) - Speed regulation on slide. - Works great

Condition: like new (used), Year of construction: 2011, functionality: fully functional, turning diameter over cross slide: 355 mm, spindle bore: 85 mm, turning diameter over bed slide: 560 mm, center height: 280 mm, turning length: 2,000 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, Turning diameter in gap: 785 mm, Huvema HU560 x 2000 Gap Bed Centre Lathe Year 2011 , CE Rated Spindle Speeds 25-1600rpm Distance Between Centres 2000mm Swing Over Bed 560mm Swing Over Cross Slide 355mm Tail Stock MT5 2 Axis Newall DRO Quick Change Tool Holder With Holders D1-8 Camlock Chucks Excellent Condition Interlocked Guards Work Light & Coolant System Machine Comes With: 3 Jaw Chuck & Reverse Jaws - 300mm 6 Jaw Chuck - 300mm 4 Jaw chuck - 400mm Faceplate - 450mm Fixed Steady x 2 Codpfx Apjzfguijterg Travelling steady Fully Serviced And Ready For Production

Condition: ready for operation (used), Year of construction: 2003, operating hours: 28,000 h, functionality: fully functional, turning diameter: 309 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 89 mm, travel distance Z-axis: 406 mm, controller model: Fanuc Typ 18i-T, TECHNICAL DETAILS Maximum turning diameter: 309 mm Spindle speed range: 25 – 6,000 rpm Travel in X-axis: 89 mm Travel in Z-axis: 406 mm Collet diameter: 42 mm MACHINE DETAILS Control system model: CNC Fanuc Type 18i-T Spindle motor drive power: 11 kW Codpfxezu Rz Eo Apterg Operating hours: 28,000 h Machine weight: approx. 5,000 kg EQUIPMENT C-axis Y-axis 12-station turret VDI 30 Powered tools at each station Power chuck, diameter 140 mm Hydraulic steady rest Workpiece collection system Chip conveyor Coolant system

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, turning length: 1,040 mm, turning diameter: 580 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 250 mm, travel distance Z-axis: 1,040 mm, TECHNICAL DETAILS Turning diameter: 580 mm Turning length: 1,040 mm Spindle speed: 3,500 rpm Travel range X-axis: 2,500 mm Travel range Z-axis: 1,040 mm Tailstock diameter: 85 mm MACHINE DETAILS CNC control: Fanuc 18T-C Dimensions & Weight Dimensions (L × W × H): 4,650 × 2,320 × 2,060 mm Machine weight approx.: 7,200 kg EQUIPMENT VDI turret with 12 driven tool stations Chip conveyor Codpfxezu Rzre Aptsrg Machine without tailstock Foot switch Chuck Turning chuck

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning diameter: 1,800 mm, turning length: 600 mm, spindle bore: 130 mm, spindle speed (max.): 400 rpm, controller model: Siemens 840D Powerline, TECHNICAL DETAILS Turning diameter: 1,800 mm Turning length: 600 mm Spindle bore: 130 mm Spindle nose: DIN 55027, size 11 Speed range: 1–400 rpm MACHINE DETAILS Control system: Siemens 840D Powerline Total power requirement: 38 / 52 kW Dimensions & Weight Machine weight: approx. 25 t Codjzv Rlgjpfx Apterg Transport width: 3,700 mm EQUIPMENT 6-jaw chuck

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, controller model: Siemens 840 D, table diameter: 1,220 mm, TECHNICAL DETAILS Table diameter: 1,220 mm Max. turning diameter: 1,500 mm Max. height under the cross beam: 900/1,200 mm Saddle travel, X-axis: 1,000 mm Table speed range: 4.5 to 100 RPM Feed rate range: 0.127 to 6.35 mm/rev Tool changer: 30 positions MACHINE DETAILS Control system: Siemens 840 D Main drive motor: 41 kW Cjdpfx Aozuy Eaopterg EQUIPMENT 8 clamping jaws 30 tool holders Full enclosure Mist extraction system

Condition: used, Max. turning diameter: 650 mm Min. turning diameter: 200 mm Max. turning length: 4000 mm Crsdpfxevk T S Aj Aptsg Max. workpiece weight: 10 tons Center height: 400 mm Faceplate diameter: 650 mm Speed: 1 - 58.4 rpm Drive power: 45 HP Tailstock

Year of construction: 2020, condition: ready for operation (used), functionality: fully functional, WMW Niles, Czech Republic Made, CNC(Siemens Controls, Retrofitted in 2020) Floor Type Heavy Duty Lathe ,With heavy Duty Tail Stock, Steady Rest, Rollers, and with 6000 MM X 4000 MM Floor plates Codpjzww R Sjfx Apterg

Condition: used, Year of construction: 2018, TSUGAMI M08SY-II CNC lathe Fanuc OiTD with Manual Guide 2 x C-axis powered tools Axis travels: X: 221 mm Z: 400 mm A: 506 mm Y: ±50 mm Main spindle max 4,500 rpm A2-6 7.5/11 kW (10/14.8 hp) Counter spindle max 4500 rpm 5.5/7.5 kW (7.4/10 hp) Max turning diameter 280 mm Max turning length 380 mm 12-station turret Chuck 210 mm Spindle bore 65 mm Parts catcher LNS chip conveyor Cedpfxozy Hm Ue Aptsrg Documentation Tool holders

Condition: excellent (used), Year of construction: 2017, SMEC SL2000SY cnc turning center with subspindle Year: 2017 Technical details: Control: iemens 828D Shopturn Swing over bed: 650 mm Max turning diamater x lenght: 395 x 490 mm Max milling diameter: 310 mm Max spindle speed main spindle: 6000 rpm Max spindle speed sub spindle: 6000 rpm Spindle nose: A2-5 Spindle bore diamter: 61 mm Max bar diamaeter through spindle: 52 mm Main spindle and subspindle with C-axis Cjdpfx Ajzyyx Djpterg Spindle Motor: 11/18.5 kW X travel: 235 mm Y travel: 105 (+/-52.5) mm Z travel : 580 mm ZB travel ( subspindle ): 580 mm Rapid traveres X,Y,Z,ZB: 24,10,30,24 m/min Number of tool stations: 12/24 ( BMT55 ) Driven tool stations: 12 positions Machine dimensions: 4125 x 1752 x 2100 mm Weight: 4150 kgs Accessories/options: Axial tool holders 4 pieces Radial tool holder 2 pieces Driven tool holders, axial, 2 pieces Driven tool holders, radial, 3 pieces Hydraulic chuck for main and subspindle Jaws set for chucks Parts catcher Swarf conveyor Coolant tank Documentations full set Under power in our warehouse, possible to test it anytime!

Condition: used, Year of construction: 2014, functionality: fully functional, For sale: a professional vertical CNC machining center, HYUNDAI WIA F400, manufactured in 2014. The machine is in exceptionally good technical and visual condition, having been used for only approximately 460 operating hours. Machines in this condition are rarely found on the used equipment market. Throughout its operational life, the machine has been regularly maintained. Even when not in use, it was started up every week, the spindle was rotated, and all axes were moved, ensuring that all mechanisms remained in excellent condition. The machine is connected and ready for inspection and testing. Key Information: Manufacturer: HYUNDAI WIA Model: F400 Year of Manufacture: 2014.05 Made in: South Korea Technical Specifications: Controller: FANUC Series 32i-Model A Maximum Spindle Speed: 12,000 rpm Automatic Tool Changer: 24 positions Power Supply: 380 V / 50 Hz Installed Power: 20 kVA Weight: 5,100 kg Codpfx Apszxgvmoterg Operating Hours: approximately 460 h Equipment: FANUC Series 32i-Model A CNC control 24-position automatic tool changer 12,000 rpm spindle Chip conveyor Cooling system Fully enclosed work area CE certificate Application: Ideally suited for: Precision milling Machining of steel, stainless steel, and aluminum Single-piece and series production Tool manufacturing Mechanical engineering companies If you have any further questions, we will be happy to answer them.

Condition: used, Year of construction: 2015, functionality: fully functional, turning length: 1,275 mm, turning diameter: 481 mm, spindle bore: 102 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,350 mm, 2-axis CNC lathe Doosan Puma 2600LB Year of manufacture: 2015 Siemens 828D control system with Shop Turn interface Axis travel: X - 260 mm Z - 1350 mm Max. turning diameter: 481 mm Max. turning length: 1275 mm 12-inch (315 mm) chuck with a large spindle bore of 102 mm 12-tool turret Tailstock Very good machine condition Codpfxozxz I Rj Aptsrg Included with the machine: - Documentation - LNS chip conveyor

Condition: new, Year of construction: 2025, REM Vertical Turning Lathe DIFFERENT TURNING DIAMETERS SCR 17 / SCR 22/SCR 27/SCR 33 /SCR 43 MANUAL Special manufactured by REM for : CENTER AND EAST EUROPE MIDDLE EAST LATIN AMERICA Credogdyyuepfx Apteg DEVELOPING SHOPS , HIGHLIGHTS - UNBEATABLE PRICE - VERY EFFECTIVE MACHINE - GOOD FOR WORSHOPS IN SMALL AND MIDDLE RANGE OF PRODUCTION - NO GEARBOXES - NO CNC CONTROLL - NO EXPANSIVE TEHNOLOGIST AND WORKER - EASY MAINTENANCE AND - EASY OPERATE - EASY LEARN Technical Details: Faceplate Diameter (mm) 1500- 2000-2500-3000-4.000 - 4700 Max. Turning Diameter (mm) + 300 Machining Height: 1500 - 2000 - 3000 mm Max. Work Piece Weight: 6-8-12-15-18-25-30 tons Control Conventional DIGITAL READ OUT for each axis

Condition: new, Year of construction: 2025, turning height: 2,800 mm, workpiece weight (max.): 30,000 kg, turning diameter: 3,300 mm, feed length Y-axis: 2,500 mm, feed length Z-axis: 1,500 mm, faceplate diameter: 3,000 mm, feed rate X-axis: 4 m/min, feed rate Y-axis: 4 m/min, feed rate Z-axis: 4 m/min, rotary table diameter: 3,000 mm, rapid traverse X-axis: 6 m/min, rapid traverse Y-axis: 6 m/min, rapid traverse Z-axis: 6 m/min, rotational speed (max.): 92 rpm, rotational speed (min.): 1 rpm, table load: 30,000 kg, table diameter: 3,000 mm, REM Vertical Turning Lathe TURNING DIAMETER SCR 33 MANUAL with DRO Special manufactured by REM for : CENTER AND EAST EUROPE MIDDLE EAST LATIN AMERICA DEVELOPING SHOPS , HIGHLIGHTS - UNBEATABLE PRICE - VERY EFFECTIVE MACHINE - GOOD FOR WORSHOPS IN SMALL AND MIDDLE RANGE OF PRODUCTION - NO GEARBOXES - NO CNC CONTROLL - NO EXPANSIVE TEHNOLOGIST AND WORKER - EASY MAINTENANCE AND - EASY OPERATE - EASY LEARN Technical Details: Faceplate Diameter (mm) 3000 Max. Turning Diameter (mm) + 300 Machining Height: 2800 mm Max. Work Piece Weight: 30 tons Codpfx Apov Ilg Hoterg Conventional Control DIGITAL READ OUT for each axis

Condition: used, Year of construction: 1992, gebraucht 1992 010190 prompt, Zwischenverkauf v 17900 € 1 320 mm 650 mm 160 mm 40 mm 192 mm 205 mm 5 5 MK 16 48 - 2500 1/min 24 0.02 - 0.63 mm/U 0.006 - 0.2 mm/U 0.25 - 8 mm 0.2 - 4 150 mm Crjdpfjyycwxsx Apteg 100 mm 40 mm 3 MK 85 mm 2,4 / 3 kW 1582 mm 715 mm 1245 mm 680 kg Heidenhain 3-axis digital readout NEWRöhm 3-jaw chuck, 160 mm diameter, with internal and external jaws Quick-change tool post with one rectangular insert and one round insert Quick-release collet chuck with various collets from 1 to 27 mm Live centre Drill chuck Chuck guard Lead and feed screw guard Motor brake Coolant system Mounting feet Operating instructions in German BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: used, Year of construction: 2001, gebraucht 2001 010191 prompt, Zwischenverkauf v Deutschland 22100 € 1 320 mm 650 mm 160 mm 40 mm 192 mm 205 mm 5 5 MK 16 48 - 2500 1/min 24 0.02 - 0.63 mm/U 0.006 - 0.2 mm/U 0.25 - 8 mm 80 - 2 Gänge/" 0.2 - 4 200 - 5 150 mm 100 mm Cjdpfjyxxygjx Aptsrg 40 mm 3 MK 85 mm 2,4 / 3 kW 1582 mm 715 mm 1245 mm 720 kg Heidenhain 3-axis digital readout NEWRöhm 3-jaw chuck, 160 mm diameter, with internal and external jaws Quick-change tool post with one rectangular insert and one round insert Quick-release collet chuck with collets from 3 to 30,5 mm Live centre Drill chuck Chuck guard Lead and feed screw guard Motor brake Coolant system Mounting feet Operating instructions in German with CE declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: used, Year of construction: 2011, gebraucht 2011 010192 prompt, Zwischenverkauf v Deutschland 24100 € 1 320 mm 650 mm 160 mm 40 mm 192 mm 205 mm 5 5 MK 16 48 - 2500 1/min 24 0.02 - 0.63 mm/U 0.006 - 0.2 mm/U 0.25 - 8 mm 80 - 2 Gänge/" Codpfsyxxyajx Apterg 0.2 - 4 200 - 5 150 mm 100 mm 40 mm 3 MK 85 mm 2,4 / 3 kW 1582 mm 715 mm 1245 mm 720 kg Heidenhain 3-axis digital readout NEW Röhm 3-jaw chuck, 160 mm diameter, with internal and external jaws Quick-change tool post with one rectangular insert and one round insert Quick-release collet chuck with collets from 3 to 29 mm diameter (in 1 mm increments) Live centre Drill chuck Chuck guard Lead and feed screw guard Motor brake Coolant system Mounting feet Operating instructions in German with CE declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: used, Year of construction: 2020, Doosan Puma GT2600M Fanuc control Year 2020 Powered tools, C-axis Z-axis 680mm X-axis 265mm Max. diameter 410mm Max. turning length 610mm Codpfxjzw Dyaj Apterg Chuck 250mm Spindle bore 81mm 12-position BMT 55 turret Tailstock Tool probe Chip conveyor Documentation 11 tools, including 1 powered tool

Condition: excellent (used), Year of construction: 2019, operating hours: 1,286 h, functionality: fully functional, Doosan PUMA GT3100L – Specifications Chuck Size: 12" Max. Turning Diameter: Ø481 mm Codpfjzw T Dbox Apterg Max. Turning Length: 1,275 mm Bar Capacity: Approx. Ø102 mm X-Axis Travel: 260 mm Z-Axis Travel: 1,350 mm Max. Spindle Speed: 2,800 rpm Spindle Motor Power: 35 kW Max. Spindle Torque: 1,613 Nm Turret: 10 stations Guideway: Box Guideway Rapid Traverse (X/Z): 24 / 30 m/min Dimensions (L × W × H): Approx. 4,633 × 2,394 × 2,110 mm Machine Weight: Approx. 6,900 kg CNC Control: FANUC