Used Profiling for sale (5,641)

Condition: like new (used), Year of construction: 2023, operating hours: 400 h, functionality: fully functional, machine/vehicle number: 2022LW160, High-speed roll forming line, equipped with tooling for the production of GELAN and SCHUCO metal profiles used in PVC window frame manufacturing. Machine achieves speeds up to 55 m/min with 6 m profile length production. Maximum processable material thickness is 2.5 mm. Upper and lower shaft diameter is 60 mm, the width between the stands is 360 mm, and each station is driven by an individual gearbox with two cardan shafts. Both upper and lower shafts are driven at each station. The line features 15 forming stands plus two straightening stands (Turkish heads). All forming rollers have a surface hardness of 62 HRC. Additionally, all auxiliary rollers and shafts in contact with the material are induction-hardened to 58–62 HRC (including run-out table rollers and horizontal accumulator rollers). A flying cut servo positioning system (DELTA 7.5 kW servo motor, ball screw, and linear guides) facilitates precise length adjustments via HMI. Hydraulic cutting system included. The run-out table features an automatic profile kickout, conveying, and separation system for continuous production without stopping. The horizontal entry accumulator for strip material ensures uninterrupted production, equipped with pinch rollers and individual drives. Double-sided hydraulic decoiler included. The line is equipped with a continuous ink-jet marking system from KONING (Germany). The automatic stacking system is not installed (see photos). The machine features recirculating cooling and lubrication across all 15 stations. Electronics: SIEMENS (PLC, contactors), SCHNEIDER (contactors), DELTA (Taiwan drives and servo). Main electric motors by Siemens. Bearings by SKF. The mechanical frame is stress-relieved and milled for precision. The machine has only been used for test production, having processed just 250,000 m of material (machine is nearly new). It is installed and connected to power; test runs can be arranged on-site. The listed price refers to the machine disassembled and loaded onto a truck. Included is comprehensive documentation with detailed tooling setup instructions for each profile (including detailed assembly drawings of rollers). Model: LW160 Supply voltage: 380 V Installed power: 73.5 kW (consumes only 40% of power when processing 2 mm strip) Pedpjyw Rzaefx Abpjra Frequency: 50 Hz Weight: 16,500 kg Current: 160 A Serial number: 2022LW160 Year of production: 2022 Year of on-site assembly: 2023

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: HB10011N2025006, The machine has not been used yet! MACHINE DETAILS Control: Teach-in Motor power: 4.0 kW Psdpozuw D Tsfx Abpera Dimensions & Weight Dimensions (L x W x H): 1,300 x 800 x 1,400 mm Unladen weight: 800 kg Transport packages: 1 piece EQUIPMENT Documentation CE marking CE certificate

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 8481-05-K951, Edge finishing with fine grinding We used this machine to process stair treads. 6 processing units: 1 x coarse grinding of the surface 2 x fine grinding of the surface 3 x profile milling on the top Prodezv Eaxjpfx Abpea 4 x profile milling on the bottom 5 x profile grinding on the top 6 x profile grinding on the bottom Automatic feed – speed can be adjusted continuously Material thickness sensor The machine is equipped for processing stair treads with an edge rounding of r=8mm on the top and bottom (individually controllable). After cutting the treads to size on the circular saw or CNC machine, we completed the processing of the treads in a single pass from the top and bottom. The machine can also be adapted for other profiles, radii, or milling operations.

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 28464, overall weight: 2,300 kg, input voltage: 380 V, type of input current: three-phase, Equipment: documentation/manual, CAT 500 cutting center – an automatic machine designed for cutting PVC profiles using a circular saw. Numerical control with dedicated software allows for programming processing parameters, limiting the operator's tasks to loading profiles and collecting finished parts. Saw parameters: - Arbor: Ø 30 mm Podpfxozvmh Re Abpora - Diameter: Ø 500 mm - Rotational speed: 3000 rpm - Max. saw blade thickness: 4.2 mm Technical data: - Voltage: 380–400 V AC3PE - Current: 8 A - Frequency: 50 Hz - Power: 3.8 kW - Air pressure: 7 bar - Weight: 2300 kg Standard equipment: - Tungsten carbide saw blade Ø 500 mm (arbor Ø30) - Welded frame with adjustable feet and the possibility of mounting to the floor - Industrial computer integrated with the machine - Infeed belts with inverter control and programmable acceleration/deceleration ramps - Label printer Dimensions: - Infeed: 7900 mm - Machine: 1000 mm - Outfeed: 2600 mm - Max. width: 2300 mm - Max. height: 1700 mm - Overall length: 11500 mm

Condition: ready for operation (used), Year of construction: 1984, machine/vehicle number: No.317, No.327, functionality: fully functional, operating hours: 40,000 h, grinding height: 130 mm, grinding length: 250 mm, grinding spindle speed: 3,300 rpm, grinding width: 100 mm, table length: 400 mm, table width: 225 mm, Equipment: rotational speed infinitely variable, For sale are 2 (two) sets of optical profile grinding machines Wasino type GLS-130AS, with Fanuc control, made in Japan in 1984. 1 machine is full working condition, there are videos of spindle runout and positioning X,Y accuracy measurements. Second machine serial No.327 is the same working condition, just factory worker could not start it up for us, was worked more then 1 year ago. There are accessories, tools and technical documentation for each machine. Prsdpfx Abowh Udtepja For 1 machine Wasino complete with accesories and tools, price is 18500 euro EXW stock. Preferable to sell as package 2 machines together.

Year of construction: 2005, condition: good (used), machine/vehicle number: 8382, 2-head welding machine for PVC profiles Pedpfx Abozdq Ttjpsra

Condition: used, Tube end forming machine,Spiro Pneumatic Tube Notching Machine / Assembly Stand, Spiro Manual Tube Notching Machine, Used Machine Prsdpezwxwgsfx Abpja Technical Specifications Manufacturer: Spiro Development AB (Made in Sweden) Year of Manufacture: 2008 Type: Manual Tube Notching Machine (with pneumatic assistance) Frame Construction: Heavy-duty aluminium machine-building profile frame Operation: Foot-switch-controlled pneumatic operation Design: Adjustable-height and adjustable-distance tube support stand for convenient positioning and machining of long tubes Overall Dimensions Width: 2350 mm Depth: 930 mm Height: 1450 mm

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 6080008264, In very good condition (almost perfect). Podpfozdp Rwsx Abpera

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, pipe diameter (max.): 30 mm, input voltage: 400 V, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, hardened rollers, HUVEMA MIP30 Profile bending machine, pipe bending machine 30mm ct2437 For sale in excellent condition HUVEMA MIP30 profile bending machine, pipe bending machine Manufacturer: HUVEMA MIP 30 Type: MIP 30 Year of manufacture: 2013 Podpfozq Sqtsx Abpera Rollers: 2 driven Upper roller up-down movement manually Max. shaft diameter: 30 mm Working speed: 4 m/min Bending capacity: - Flat steel: 50 x 10 mm - Square 35 mm - Closed section: 40x 40 mm - Pipe 48 x 3 mm Power: 400 V / 0.75 kW 50Hz Electric foot switch, with emergency stop Standard bending set Weight: approx. 200 kg Dimensions: W 650 x H 1350 x D:580 mm

Condition: excellent (used), Year of construction: 2015, operating hours: 26,407 h, functionality: fully functional, BLM Group ADIGE-SYS EM 80 – Fully automatic circular saw for tubes and profiles, year 2015. We offer for sale a fully automatic circular saw, the BLM Group ADIGE-SYS EM 80, designed for precise and highly productive cutting of tubes and profiles in serial production. Prjdpfxozvm Dfo Abpsa The machine is equipped with a Siemens SINUMERIK CNC control system and an automatic material feeding system, which enables efficient and repeatable production of larger series. Technical data: Manufacturer: BLM Group / ADIGE-SYS Model: EM 80 Year of manufacture: 05/2015 Control system: Siemens SINUMERIK Operating hours: approx. 26,400 h Tube cutting range: Ø 10–80 mm Max. length of finished part: 600 mm Total installed power: 38 kW Power supply: 380 V / 50 Hz / 3 phases Machine weight: approx. 8,500 kg Equipment: automatic material feeding system fully automatic working cycle multiple tool/working positions complete enclosure of the working area extensive set of interchangeable clamping jaws for various diameters – see photos supply and feeding section of the line Siemens SINUMERIK CNC control The machine is particularly suitable for serial production of shorter parts made of tubes and profiles, where high productivity, repeatability, and cutting accuracy are required. Condition and history: The machine was purchased by the current owner approximately 2 years ago for a planned production project, which was ultimately not carried out. Therefore, it has not been used in production since then. The machine has undergone a refurbishment of the hydraulic brake seals on the bed. Technical documentation in German is available, including complete electrical documentation. The offer also includes accessories and a set of clamping jaws shown in the photos.

Condition: good (used), Here are the official specifications of your *BPR CP30* – 30mm spindle: It is a small but very versatile machine. Capabilities for mild steel: *Manufacturer's data for BPR / Eagle CP30:* - *Flat bar to flat bar:* 80 x 15 mm max - *Flat bar on edge:* 50 x 10 mm (to be verified, but standard on CP30) - *Round tube:* 60.3 mm x 2 mm (2-3/8" x .062") - *Square tube:* 38 mm x 3 mm (1-1/2" x .120") Podpfxezwg Rzs Abpora - *Round solid bar:* 30 mm max - *Square solid bar:* 30 mm also - *Gas pipe / Pipe:* 1"1/2 Sch 40, i.e. 48.3 mm - *U-channel:* 50 x 25 x 5 mm - *Angle iron:* 40 x 40 x 5 mm (external) / 35 x 35 x 5 mm (internal) d019775a *Technical specifications:* - Spindle diameter: 30 mm - 2 drive rollers (the lower 2) - Bending speed: 8.5 m/min - US speed: 12 feet/min - Weight: 210-247 kg depending on version (yours is 187 kg on the plate = older, lighter version) d019 In short, it is perfect for standard locksmithing/metalworking.

Condition: used, Cassettes + cutters for a roll forming machine used in the production of trapezoidal sheet metal. Two different profiles can be produced. H = 158 mm x W = 750 mm H = 153 mm x W = 840 mm Details can be found in the photos. Processable sheet metal: Aluminum + steel in 0.75 - 1.5 mm Consisting of a total of: - Cassette 1 for profile 153 and 158 - Cassette 2 for profile 153 and 158 - Cassette 3 for profile 153 and 158 - Cassette 4 for profile 153 - Cassette 4 for profile 158 Psdjzvgwfopfx Abpera - Cassette 5 for profile 153 - Cassette 5 for profile 158 - Cassette 6 for profile 153 - Cassette 6 for profile 158 - Cutter for profile 153 - Cutter for profile 158 All items come from ongoing production; the sale is due to a product changeover. This includes only the cassettes + cutters, without drives, coils, shears, etc. Total weight: approx. 86,000 kg

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 000464, Max. pipe diameter Ø 42 mm Min. pipe diameter Ø 6 mm Max. pipe thickness 2.5 mm Max. bending radius 270 mm Min. bending radius 25 mm US metric: Max. pipe diameter 1.654 inch Min. pipe diameter 0.236 inch Max. wall thickness 2.5 inch Max. bending radius 10.63 inch Min. bending radius 0.984 inch Throughput: 42; Rotation angle: 187°; Digital display: yes; Motor power: 95 kW; Electrical connection: 380 V; Machine weight: 1550 kg; Dimensions: 4700 mm; Width dimension: 800 mm; Height dimension: 1300 mm; Psdpfx Abjvmpbrepera

Condition: used, Year of construction: 2017, - 4 belt grinding units - Frequency control for all units - Electronic grinding pressure control Universal edge and profile grinding machine Manufacturer: Heesemann Type: UKP 20 Year of manufacture: 2017 Technical data Workpiece transport system - Total length: 5015 mm - Driven by a 1.5 kW three-phase motor with a double chain for workpiece transport - Feed rate in the range of 5-25 m/min, frequency-controlled - Working height constant at 880 mm - incl. integrated control cabinets - incl. adjustable guide rail with digital display and incl. counter rail with central width adjustment 4 lateral guide rollers between the grinding units for secure transport of workpieces Industrial PC 10.4" - LCD-TFT color display - Touch screen version - with display for production and downtime - with program memory for 100 programs 2 belt grinding units "M 4" Pos. 1 and 2 - for grinding straight edges - Belt dimensions: 2300x80 mm - Belt speed: 0.7-12 m/s - Motor power: 3.0 kW - with electronic frequency control for stepless control of the belt speed - Electronic grinding pressure control from the terminal 2 oscillation units for "M4" (Pos. 1+2) For complete utilization of the grinding belt 2 belt grinding units "K 4" Pos. 3 and 4 - for grinding small profile sections - can also be used for edge breaking Psdozuzb Aepfx Abpera - Can be swiveled 90 degrees upwards and 45 degrees downwards - Belt tear switch - Tool holder with quick-change device - Intermittent belt extraction device - Belt dimension: 2000x50 mm - Belt speed: 0.5-8 m/s - Motor power: 1.1 kW - with electronic frequency control for stepless control of the belt speed - Electronic grinding pressure control from the terminal 4 electronic control units - for the fully automatic timing of the lowering and raising of the grinding tool, depending on the set feed rate, the grinding pressure and the unit angle setting Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2016, A versatile 2 head edge sander for solid timbe, mdf, chipboard, etc 1 - 80mm wide x 2450mm sanding belt with 2 speeds 700 / 1400rpm x 1.0 / 1.5kw with timed entry / exit, mechanical oscillation, and pneumatic belt tensioning 2 - Abrasive wheel sanding unit with automatic compensation for wear Sanding units can be used vertically or horizontally and have mechanical digital readouts for setting Manually adjustable top pressure beam with rubber rollers Track feed with variable feed speeds 1 - 18m/min Pedpszd Uzhefx Abpera Touch screen controller Year - 2016 CE.

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles (300 x 100 mm), consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Prsdeyhcabopfx Abpja Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Year of construction: 2009, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1223330255, For sale is a reliable Elumatec SBZ 122/33 3-axis CNC profile machining center. The machine has been used exclusively in a high-end aluminum window and door production facility; therefore, it has been professionally maintained and has never been subjected to substandard or neglectful operating conditions. This model is an industry standard for milling and drilling aluminum, PVC, and thin-walled steel profiles. The equipment operates flawlessly, maintains its factory accuracy, and is fully ready for production. We are selling the machine due to a factory upgrade and modernization plan. For seriously interested buyers, we can provide a video demonstrating the machine in operation. Additional Information: • Inspection: The machine is currently connected to power and compressed air. It can be inspected and tested live on-site in Kaunas, Lithuania. • Loading/Transport: The buyer is responsible for organizing transport, but we can assist with loading the equipment. For further details or to arrange an inspection, please contact us at the number provided. Price: €25,500 + VAT. Open to negotiation on-site. Sold by a company; an EU-VAT invoice can be issued (0% VAT available for EU VAT-registered buyers outside Lithuania). Podpfx Ajzd R Iqebpjra

Condition: like new (used), Year of construction: 2022, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, power: 56 kW (76.14 HP), coil weight: 10,000 kg, A high-performance profiling line (roll forming machine) T153 for the production of sheet metal profiles (153 mm) is for sale. Year of manufacture: 2022 Condition: Excellent (practically new equipment). The machine has only undergone minimal operation – it has processed a maximum of 50 tons of material. Prsdpoy Uzzfefx Abpea Main advantage: The line is completely set up, connected, and ready for immediate testing. You don’t have to wait months for delivery from the factory, nor spend large sums of money on commissioning and adjustment. The equipment is ready to be integrated into your production immediately! ⚙️ Technical specifications: Material thickness: 0.7 – 1.5 mm Line speed: 8 – 12 m/min (high productivity) Main motor: Powerful 18 kW x 2 drive Hydraulic unit motor: 5.5 kW Overall dimensions of the line: Length 50 m x Width 2 m x Height 1.2 m 📦 Complete line assembly: - Coil unwinder: Designed for heavy coils up to 10 tons, motor power – 11 kW. - Profiling machine T153: Main forming unit. - Automatic stacker: Length 12 m, power 4 kW (enables the automation of receiving and storing finished long products, which significantly reduces personnel costs). 🔥 Why this is a beneficial offer for your business: Minimal wear and tear: Processing only about 50 tons is considered test operation for machines of this class. You are buying a practically new machine at the price of a used one. Ready for testing: The equipment is currently connected. You can bring your own material, start the line, and personally verify the perfect geometry of the finished profile. Fast start: The machine is located directly in the Czech Republic, and it is ready for dismantling and shipment. No lengthy international paperwork or customs duties. 📍 Location: Hradec Králové, Czech Republic. Upon request, we will gladly provide additional photos and a video of the machine in operation. Call or write to inquire about the price, dismantling, and shipping conditions. We will be happy to answer all technical and organizational questions!

Condition: used, Year of construction: 2021, functionality: fully functional, Sale of complete PVC profile extrusion lines We offer for sale 6 complete technological lines for the production of PVC profiles, originating from an operational production facility. The equipment dates from 2011–2025, with some units having undergone major overhauls. The technological lines include: • twin-screw conical extruder Pol-Service Majcher PSMD 65 / PSMD 65/132, • main motor power: 37 kW, • output: approximately 120 kg/h, • calibration table with 2 vacuum tanks (Pol-Service Majcher, Polreplast or Greiner – depending on the line), • caterpillar haul-off with guillotine (Greiner or Gruber Extrusion), • stacking device, • vibrating station for unloading Big-Bags. Key information • 6 complete technological lines, • main motor power: 37 kW, • output: approximately 120 kg/h, • equipment from reputable manufacturers: Pol-Service Majcher, Greiner, Polreplast, Rawotechnik and Gruber Extrusion, • selected equipment after major overhauls, • available technical documentation and CE documentation for selected machines. Purchase options: • single technological line, • several selected lines, • complete machine park, • the entire facility with all production equipment. The price quoted is for one line. Pjdpfxozlpabo Abpora A detailed list of equipment, technical parameters, technical documentation and additional photos are available upon request. Location: Lower Silesian Voivodeship, Poland.

Condition: like new (used), functionality: fully functional, Year of construction: 2019, machine/vehicle number: DN1792, Tiger Lifting Equipment – Kurschildgen GmbH, Lifting Equipment Manufacturing Spindle gripper, gripper with handwheel and positively locking gripping arms for lifting a hexagonal contour using a crane. Load capacity: 400 [kg] Type: ST-SU-040-600_6KT-06357 Gripping width: 600 [mm] Gripping breadth: 180 [mm] Payload: 400 kg Weight: 75 kg 6 units available!!! Like-new condition with minor signs of use, see images. Item location is 75053 Gondelsheim. See images. Shipping via freight forwarder or collection by appointment only. Pjdpfszv E Ddex Abpera

Condition: good (used), Year of construction: 1998, 1 used ring and profile bending machine Manufacturer: Euring Type: CM 2000 Top 2 Year of manufacture: 1996 Solid round material: 30 mm Solid square material: 30 mm Flat steel: 50 x 10 mm Shaft diameter: 30 mm Working speed: 6.0 RPM Roller diameter - tools: 132 mm Total power requirement: 0.75 kW Machine weight: approx. 0.25 kg Space requirement: approx. 0.6 x 0.8 x 1.3 m Profile bending machine with: - 1 set of standard rollers - 2 rollers are driven - Can be operated horizontally or vertically with foot switch Prjdjzv D E Tjpfx Abpoa

Condition: excellent (used), Technical data: 2 rollers, hydraulically adjustable 2 support rollers 3 driven rollers NC control Predpszv Ernjfx Abpea Shaft diameter: 80 mm Shaft length: 160 mm Roller diameter: 224 mm Motor power: 5.5 kW Mobile control panel Dimensions (length x width x height): approx. 1240 x 1460 x 960 mm Weight: approx. 1.4 tons Condition: very good condition, little use The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: AR200 tube and profile roll, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Delsy, controller model: MG Touch Pro 15", pipe diameter (max.): 273 mm, tube wall thickness (max.): 20 mm, bending angle (max.): 200 °, number of axes: 9, working height: 2,200 mm, overall weight: 27,000 kg, total length: 2,850 mm, total width: 2,950 mm, total height: 2,930 mm, power: 29.42 kW (40.00 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, operating pressure: 240 bar, number of digital displays: 6, Equipment: documentation/manual, emergency stop, Profile bending machine model AR200 brand MG srl year 2016 Capacity chart of the machine in enclosed. Model AR200 Pjdeyx A Uujpfx Abpora Pipe bending roll NR. 2 set of rollers for pipe bending SIZE 159MM - SIZE 139,7 MM Configuration -pyramid dual pinch side rolls independent hydraulic -3 rolls driven hydraulic with gear unit each shaft -side arms left/right side hydraulic move in 3 direction keeping aligned the profile being formed. -Control panel console NC programmable with automatic rolling, touch screen 15” , display the 9 axis of the machine with readout for manual use and fully programmable automatic forming -Electric power supply 3phase 400/50 Vac -40HP -Service manuals and operation books original. Additional set of rollers and tooling available for bending section HEB - IPE -UNP - ANGLE – T -SECTION- TUBULAR- IRON BAR ON EDGE - see capacity chart in enclosed ..

Condition: like new (used), Blockhouse profile cutter, with teeth on the back. Prjdjzvzu Sepfx Abpsa

Condition: good (used), functionality: fully functional, *Description* Hydraulic shear and punch press *GEKA model HYD 50-S* No. 3497. Versatile 5-station machine, ideal for cutting and punching steel profiles. Robust machine, visible and in working order. *Technical Specifications* - *Brand / Model*: GEKA HYDROCROP HYD 50-S - *Machine No.*: 3497 - *Punching force*: 50 tons - *Bending force*: 50 tons *Capacities with standard blades* - *Angle iron*: 120 x 120 x 10 mm at 90° - *Flat bar*: 300 x 15 mm - *Round bar*: Ø 40 mm - *Square bar*: 40 x 40 mm - *Punching*: Ø28 x 13 mm thickness *Special Equipment* - *Bending*: 200 x 15 mm - *Notching*: 250 x 250 x 6 mm - *Shear for UPN/UPE*: 100 mm - *Shear for IPN/IPE*: 100 mm Pjdpozt Swlefx Abpsra *Condition* Complete machine with stations: punching, flat/angle/round/square shearing, bending, notching. Sold with punches. Heavy weight, mounted on a steel base.