Used Profile Machining Center for sale (70,773)

Year of construction: 2015, condition: excellent (used), Machining centre with 4 CNC-controlled axes for machining profile bars or parts made of aluminium, PVC, non-ferrous metals, and steel up to 3 mm. Travel Range: X-axis up to approx. 4300 mm Y-axis up to approx. 270 mm Rjdewhwpljpfx Adbebt Z-axis up to approx. 300 mm The profile rotating device positions at -90°, 0°, and 90°, eliminating the need for angle heads for lateral machining and allowing full utilization of the spindle motor’s power range. Minimum quantity lubrication system (oil) 4 clamping elements 8-slot tool changer Tool holder HSK - 63F MG Pilot control panel Pneumatic reference stop on the right side

Condition: used, Technical details: x-travel: ca.1000 mm y-travel: 400 mm z-travel: 420 mm Redpeu Idnmofx Adbebt control: Siemens Sinumerik 805/810 thread cutting up to max.: M 22 bore capacity in St 60 - full boring: 25 mm milling area: Leistung in St 60:150 mm sawing stroke: ca. 55mm mm range of revolutions per minute - continous: 20-6000 U/min Number of working hours: manual 26180 h tool turret: 12 Plätze/places tool taper: SK 40 total power requirement: 18 kVA weight of the machine ca.: 5,0 t machine dimensions LxWxH: 2,9x2,5x2,8 m transport measurements machine: 2,4x2,6x2,75 m Equipment: - special equipment/device ( modulating clamping system) for milling jobs of profile materials with an automatic longtitudinal cutting to length device for workpieces via circular saw module. (without functionality) - hotrizontal tool clamping ( force fitted) with vise clamping system and parallel ledges.(momentarily approx. 80mm) - tool changer type Chiron - basket tool changer - tool clamping mechanically locked, infeed force 5000N - swarf conveyor make Knoll - loading and unloading system FMB LM RP 3000 The machine is not fuctional. On sale as is for a small budget i.D. *

Condition: good (used), Year of construction: 2009, Elumatec SBZ 140 Extended Length Version: 7.6 meters Approximate weight: 5,000 kg Automatic tool changer 2-section clamping system 2 pneumatic stops Safety hood Light curtains Automatic clamp detection Central lubrication Coolant spray system Chip trolley Conditioning unit Rsdpfx Adsx E Ahzebsbt Max spindle speed: 24,000 rpm Tool holder: HSK-63F, 8-position tool changer Max milling diameter: 80 mm Max saw blade diameter: 200 mm Compressed air: 7 bar The SBZ 140 is a 4-axis profile machining center (axes: X, Y, Z + A). Designed for aluminum and thin-walled steel profiles. 4-axis CNC machining center (X/Y/Z + tilt/rotation axis A) X-axis: approx. 7,900 mm travel Y-axis: approx. 850 mm travel Z-axis: approx. 650 mm travel A-axis (rotation/tilting): Freely programmable angle, –90° to +90° Axis traverse speed: X-axis up to approx. 65 m/min, Y- and Z-axis up to approx. 60 m/min (varies with configuration) Control: 4-axis CNC system, PC control, color display, USB & network connectivity. Software: eluCam. Automatic material clamps; automatic positioning via index pins Pendulum/shuttle operation (two work zones), improving production throughput time. In addition to milling and drilling, also tapping, sawing, and profile machining—all with stationary clamped profiles. Please note: The information on this page has been obtained and compiled to the best of our knowledge, but its accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend verifying all relevant details. Financial information VAT/margin: VAT: The price shown is exclusive of VAT (VAT deductible for business customers).

Year of construction: 2006, condition: good (used), 3-axis / 5-side machining center with ISOLA soundproof cabin for aluminum, PVC, and steel profile bars. Comparable to Elumatec, Mecal, Fom, Pertici, etc. Rbedpfsx Dimxsx Adbst The machine features two machining zones and two tool magazines, which can be operated individually in pendulum mode or together for setups spanning the entire machining length (multi-part operation). The clamps can be positioned independently on the left and right relative to the machining head. Travel distances: X-axis: 7000 mm Y-axis: 300 mm (+113 mm from the movable worktable) Z-axis: 350 mm P-axis: 3500 mm (for left-side clamp positioning) H-axis: 3500 mm (for right-side clamp positioning) 8 clamping elements (4 clamps per machining zone) 12 tool holders (6 holders per changer magazine/machining zone) Including: Camplus software 2 angle heads

Condition: new, Machining center with 4 CNC-controlled axes For machining profiles made of aluminum, PVC, and steel Comparable to Emmegi, Elumatec, Fom, Pertici, etc. Machine frame made of robust welded construction, stress-relieved annealed, with hardened linear guides Protective cabin over the entire machining length Pneumatically operated safety door Milling spindle: 3.8/4.6 kW S1/S6 3.0/3.7 Nm S1/S6 max. 18,000 rpm, air-cooled with ISO 30 tool holder with minimum quantity lubrication for tools, including fill level monitoring Tool magazine: 5 positions, left side in the machine bed, for accommodating drilling, milling, threading tools, angle head, and disc cutters up to Ø 150 mm Workpiece clamping: 4 pneumatic profile clamps, clamping range up to 250 mm Automatic positioning via device on the Z axis Workpiece positioning: One pneumatic reference stop on each side (left and right) on the A axis Travel ranges: X axis 3500 mm Y axis 370 mm Z axis 348 mm A axis ±90° Travel speeds: X axis 70 m/min. Y axis 30 m/min. Z axis 30 m/min. A axis 60°/sec Maximum working areas: X axis 3270 mm Y axis 250 mm at 0°, 116 mm at ±90° of the A axis Z axis: 170 mm at 0°, 200 mm at ±90° of the A axis Operating software: CAD/CAM in 3D technology (option, included!) Programming system according to ISO standard Functionality: Linear and circular interpolation on two axes (X-Y) Three-side processing by swiveling the A axis 90°-0°-90° End machining using disc cutter Operating modes: One profile bar over the entire machining length Two profile bars with split machining length Lubrication system: Automatically controlled central lubrication for all axes, ball screws, and guides, with fill level monitoring Operation: 18.5” touchscreen Mouse + keyboard Connection data: Electrical: 400V/50Hz (3-Ph+N+PE), 16 A, Delivered without power cable Pneumatics: Pressure 6 - 8 bar Dimensions and weight: Length: 5800 mm Rodpfjwrcwpsx Adbjbt Width: 1640 mm Height: 2000 mm Weight: 2000 kg Included: Graphical programming software CM3D/CAD3D Barcode reader Additional network connection including remote maintenance/diagnostics for 1 year

Year of construction: 2008, condition: excellent (used), functionality: fully functional, ❇️ elumatec SBZ 122 / 30 – CNC Machining Centre for Aluminium Profiles Very good condition | fully functional | well-maintained industrial machine ⸻ Rsdjx Tfi Ropfx Adbobt For sale is a high-quality CNC machining centre elumatec SBZ 122/30 from a window and façade construction company. The machine is in very good, well-maintained, and fully operational condition, and was productively used up to the end. It is ideally suited for efficient processing of aluminium, light metal, and thin-walled steel profiles in professional window, door, and façade construction. The machine was ordered at the end of 2007, delivered and commissioned in May 2008. Throughout its entire service life, it was operated by a single, highly conscientious employee, including all necessary work preparation. On-site inspection and functional testing are possible by appointment at any time. ⸻ ❇️ Machine • Manufacturer: elumatec • Model: SBZ 122 • Machine type: CNC machining centre for profile processing • Application: Window, door, and façade construction • Control system: elumatec CNC control with operator panel & keyboard • Axes: CNC-controlled multi-axis machining • Material processing: - Drilling - Milling - Thread cutting - Notching / profile processing ⸻ ❇️ Equipment & Highlights • CNC processing unit with automatic tool changer • Integrated roller conveyor / material support • Multi-beam safety light curtain SICK M4000 • Pneumatic clamping technology • Cooling and lubrication unit • Operator panel with monitor & keyboard • Foot switch • Heavy-duty industrial design – durable & precise • Ideal for series and single part production ⸻ ❇️ Condition & History • Very well-maintained overall condition • Technically fully functional • Maintenance and any necessary repairs carried out by Vincon (elumatec’s service and sales partner) • Use of original spare parts • Very low reject rate due to careful work preparation and operation • Minimal tool wear • No known technical defects ⸻ ❇️ Documentation & Accessories • Operating manual for SBZ 121/122 operating software (2 copies) • Operating manual for SBZ 122/20+30 • Tool list including recommended cutting data • CD-ROM for SICK M4000 multi-beam safety light curtain • Copy of the original invoice from 2008 with details of the delivery scope at that time ⸻ ❇️ Technical Data • External dimensions (L × W × H): approx. 7,000 × 2,200 × 2,600 mm (approximate, precise measurements upon inspection) • Weight: approx. 4,500 kg (estimated) ⸻ ❇️ Price €21,900 net plus 19% VAT ⸻ ❇️ Terms & Conditions • Sale on behalf of the customer • Invoice with VAT shown separately • Location: 72229 Rohrdorf • Loading by overhead crane available on site • Delivery possible on arrangement and cost coverage • Collection preferred ⸻ ❇️ Inspection & Enquiries Available by phone or message – inspection explicitly recommended.

Year of construction: 2014, condition: good (used), functionality: fully functional, FOM INDUSTRIE DALI 70 For profiles up to 7m 6.5KW Electrospindle ISO30 10 tool magazine on head (some tools are included) Rjdpfxoxcywls Adbjbt 8 Vices with independent positioning Automatic lubrication of guide blocks and recirculating ball screw lead screws Pendular machining MQL Barcode Reader Dimension 8600x2050 Weight 3900KG Can be loaded on truck

Condition: new, Year of construction: 2025, Cost-effective four-axis profile machining center (X, Y, Z + I - rotary table axis) for automatic three-sided machining of profiles made from aluminum, non-ferrous metals, plastics, and steel up to 3 mm wall thickness – brand new. CNC control system based on Windows® with 3D color graphics and simultaneous machining capabilities. Maximum machining length: 3,000 mm Maximum clampable profile length: 3,700 mm Machining of longer profiles possible Maximum profile cross-section: 200 x 180 mm Rjdpsx N T Dbefx Adbobt Milling spindle drive power: 4.5 kW (optional 8 kW) Tool holder: SK30 (optional HSK40 / HSK63) Milling spindle speed: 120 to 24,000 rpm Space requirements including mobile control panel and rear safety fence: approx. 5.5 m x 3.1 m x H 2 m Weight: approx. 1,500 kg - Covered tool magazine for six tools - Automatic tool length measurement - Automatic front door - Rear workspace safety with protective fence and access door - 6 pneumatic clamping bridges - 2 longitudinal stops (left and right) - CNC control system based on Windows® with 3D color graphics and simultaneous machining

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 12200991016, rotational speed (min.): 24,000 rpm, overall weight: 1,635 kg, tool weight: 2,900 g, input voltage: 400 V, For economical and efficient machining of aluminium, plastic and thin-walled steel profiles All machining processes such as milling, drilling and thread cutting take place on a stationary profile, protecting the profile surface Improved work results thanks to the use of intelligent control technology Fast positioning of the machining unit at up to 60 m/min thanks to the use of dynamic servo drives Thread cutting without compensating chuck Automatic clamp recognition and positioning Automatic tool magazine with four tool shelves (without tools) Rjdpfswgmyqjx Adbebt Modern, 3-axis control Ergonomic work thanks to the use of a modern inclined bed No need for a reference movement of the axes thanks to the use of absolute encoder-based systems Collision avoidance thanks to automatic clamp recognition and positioning Power-Torque milling motor with closed speed control ensures short start-up and deceleration times spindle Certified, drive-integrated safety functions Low power consumption thanks to intelligent control technology Increased energy efficiency thanks to the connection of axis drives between circuits Uninterruptible power supply (UPS) Windows operating system 15.6" Panel PC, i3 processor, USB ports and network interface Easy and convenient program entry via eluCam on the operator panel, even during machining Remote online maintenance Machine equipment Air-cooled 8 kW milling spindle, S1 Cabin for operator protection Four horizontal pneumatic clamps for clamping the material Material stop, left side HSK-F63 tool holder Minimum quantity lubrication High-performance coolant Manual control panel Depth gauge Options Tools Tool holders Automatic tool magazine for up to four standard tools Automatic tool magazine for angle head Rotating head HSK-F63 angle for two tools Green-line cooling unit for control cabinet with reduced energy consumption Barcode scanner Protective cabin, optionally with all-round closure Four clamps as standard. Expandable to eight clamps Right reference material stop for placing workpieces with overlength processing Additional stop for overlength processing on the left Length measurement on both sides Double clamp and additional accessories upon request Panel PC 18.5", i5 processor Panel PC 21.6", i7 processor Note holder Sound-absorbing hood Chip disposal using chip trays

Condition: good (used), Year of construction: 2018, Manufacturer: INDUCTAFLEX Type: AL-3e Control system: ACCURATE touch screen Year of construction: 2018 3 rolls driven servo Torq each roller 3500 nM Electrically support rolls Intelligent software : Ellipse program U Bend shapes control of tangents Auto section detector Specifications Metric US Standard Horizontal and Vertical Horizontal Axis Ø 105 mm Number of rollers 3 Stroke X axis 0 - 400 mm Dimensions (estimate) length 4500 mm width 3200 mm Rbsdpfx Adovd Dftjbet height 2700 mm weight 3300 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Year of construction: 2018, condition: good (used), For machining aluminium and steel profiles Fully functional, in very good condition Machining length: 7200mm 3-axis control with 15" screen Tool changer: 8 positions / turret 8 pneumatic horizontal material clamps Autonomous clamp positioning Two separate work zones, suitable for pendulum operation 2 pneumatic material stops 8 tool positions / BT30 turret Barcode scanner Handheld control unit Safety light barrier at the front and side safety fence Minimal quantity lubrication Central lubrication Thread cutting without compensating chuck Rsdpex Diqwofx Adbjbt Simple programming at the control panel High-speed spindle up to 18,000 rpm Including 3 angle heads X-axis [mm]: up to 7,200 / 7,200 Y-axis [mm]: up to 485 / 310 Z-axis [mm]: up to 340 / 260 Rapid traverse speed X/Y/Z axis [m/min]: 60/60/60 Max. milling cutter diameter: 25mm Max. saw blade diameter: 180mm Max. tool length: 200mm (tool + holder) Max. spindle speed: 6,000 rpm Spindle power: 6 kW Weight: approx. 5.5 t Total operating hours: 30,844 h Total spindle hours: 11,583 h

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, spindle speed (max.): 24,000 rpm, travel distance X-axis: 4,175 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, spindle motor power: 8,500 W, ZC 4035 3,5 Axis Aluminum Machining Center - Robust mechanical structure suitable for high speed - Axis speeds with an average of 95 m/d Rbodpfx Ajwfyuxodbot - Profiling length 4175 mm - Machinable profile section size 300 x 300 mm - Number of clamps 6 pieces - Spindle motor 8.5 kW 24,000 rpm - The number of magazine sets is 8 - Ø 200 mm saw- Mitsubishi PLC control unit - Vices positioned by the X-axis - Automatic tool recovery in case of power failure Design - Mechanical structure that can process aluminum and steel profiles at high speed and high quality - Stress relieved cast and welded parts to ensure consistent high speed accuracy - Axis speeds with an average of 95 m/min. - Ability to perform milling, notching, drilling, threading, countersinking, cutting, etc. - Profile machining length 4175 mm - Machinable profile section size 300 x 300 mm - Automatic lubrication system - Coolant spray system Control Panel - Versatile adjustable, ergonomic kiosk - 19'' screen - User-friendly Kaban interface with Windows-based, easily adjustable parametric structure - Compatibility with .NCX extension software - High performance 3 axis Mitsubishi PLC control unit- Optical communication and command increment - Communication via Ethernet- Working with G-Code - Data transfer via USB and COM Port Spindle - 8.5 kW / 24,000 rpm - HSK F63 tool holder - Encoder - Temperature control - Liquid cooling - Tool cooling Magazine - 8 tool holder capacity - Tool change in up to 8 seconds - Ø 200 mm saw can be attached Profile Supports - Automatic profile support system on both sides - Suitable for working with long profiles Vices - Narrow, designed vices protected against external factors - 6 standard clamps - Vices positioned by the X-axis - Profile sliding comfort on the vise surface with the roller system - Three different clamping forces according to the profile thanks to the pressure regulator Safety - Ability to continue from where it left off in case of power failure with the UPS system - Auto-recovery function that sends the spindle to the safe zone - Working safety with cover and safety barriers Technical Support - Periodic maintenance reminder function - Service support with remote connection

Year of construction: 2016, condition: good (used), functionality: fully functional, machine/vehicle number: 6280028128, Machine is provided "free loaded truck". No dismantling and loading costs! TECHNICAL DETAILS Max. profile cutting width: 320 x 160 mm Min. profile cutting width (depending on gripper position): 30 x 10 mm Raw material system Length of the raw bar system: 7,600 mm Finished part system Finished part length: 3,500–4,600 mm Kurt cell Kurt cell (50-150/150-350): optional Feed system Rjdpfx Adsvvu S Ijbebt Shortest raw bar length: 1,500 mm Swing arm selection: 5 (option 9) Support plate: 10 (over 120 mm 5) Infeed Servo drive: linear Gripper adjustment electric: Y/Z Gripper guide: standard Remnant piece measurement: optional Remnant piece processing: fully automatic Processing station Number of axes: 5 Milling spindles: 8 (can be prepared) Saw Number of axes: 3 Saw blades (diameter): Ø 550 mm, optional Ø 650 mm Saw angle: 22.5°–157.5° (swivel) Notch cuts: standard (from above) Outfeed chip carriage Number of axes: 1 Outfeed conveyor Lifting station: yes Swing selection: 5 Width of outfeed conveyor: 4,000 mm MACHINE DETAILS Dimensions: 20 x 3 x 4 m Weight: 8.8 t Connection power: 39 kW Operating voltage: 3/N/PE 400 V EQUIPMENT - Feed magazine - Loading transport - Processing station with milling unit, saw unit and clamping blocks - Unloading transport of profiles (removal gripper) and unloading conveyor - Acoustic protection cabin - Control panel on the soundproof cabin - Control cabinet - Fencing and protective doors

Year of construction: 2003, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 300-M270100, Schüco PBS profile machining center – 5-axis CNC, year of manufacture 2003, ready for immediate use TECHNICAL DETAILS X-axis travel: 6,650 mm Y-axis travel: 800 mm Z-axis travel: 500 mm X-axis feed rate: 0–40 m/min X-axis rapid traverse: 40 m/min Y- and Z-axis feed rate: 0–30 m/min Y- and Z-axis rapid traverse: 30 m/min B-axis rotation: 0–90° continuous C-axis rotation: 0–360° continuous B- and C-axis rotation speed: 10,000°/min Positioning accuracy within a macro: max. 300 mm ±0.1 mm Positioning accuracy over a 6,000 mm length: < ±0.15 mm MILLING Maximum tool dimensions for milling and drilling: Ø 50 mm, length = 60 mm Maximum tool dimensions for disc milling cutters: Ø 300 mm Maximum spindle motor power: 7 kW Disc milling cutter spindle motor power: 7 kW Spindle speed: 0–30,000 rpm Tool change time: < 15 s (clamp to clamp) Rjdpfsxr N Rmex Adbjbt Tool holder: HSK-E-40 steep taper Tool magazine: 9 plus 1 positions Total machine weight: 6.5 tons WORK AREA Number of clamping blocks: 8 units Clamping block positioning: automatic Maximum profile length for 3-sided machining: 6,650 mm Maximum profile length for 5-sided machining: 6,100 mm Maximum profile cross-section with maximum tool length: 300 mm x 230 mm

Year of construction: 2000, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 1500050136, Technical data: - Travel X-axis: 7300mm - Travel Y-axis: 1000mm Rbjdpsv Avg Hofx Adbst - Travel Z-axis: 650mm - Swivel angle A-axis: 0-90° freely programmable - Swivel angle C-axis 0-355° freely programmable - Max. processing length without front-side processing: 7300mm - Max. processing length with front-side processing: 6980mm - Tool changer with 10 places and a saw blade holder Bo72Ttwr8E - 9 material clamps - Tool holder SK30 - 2-layer processing

Year of construction: 2010, condition: ready for operation (used), Profile length: 500-7500mm, max. rotational speed: 22.000/min, the machine should be overhauled. Redpfx Adopaiiyebjbt

Condition: used, Year of construction: 2008, travel -x axis 10.000 mm travel -y axis 1.000 mm travel -z axis 500 mm control SIN840D Profile Length 7.200 mm profile width 300 mm height of profile 300 mm workpiece sizes max. 8.000 x 1.000 x 300 U/min spindle turning speed - stepless 1 - 24.000 U/min power capacity 15,00 kW tool taper HSK-A50 Feed X / Y- axis 1 - 60.000 mm / min. Rodpfx Aov T Nn Sjdbsbt Feed z- axis 1 - 20.000 mm / min. B - axis +/- 180 ° C-axis 360 ° tool magazin: 24 tool length - max. 240 mm tool diameter 95 mm wotkpiece diameter with 2 vacant positions 200 mm saw blade diameter max. 350 mm working area 7.200 x 300 mm total power requirement 30,00 kW weight of the machine ca. 14,00 t dimensions of the machine ca. 13,00 x 5,50 x H3,80 m 5-axis high-speed machining center with SIEMENS SINUMERIK840D control, RECKERTH high-frequency spindle, 8 carrier units, each with a pneumatically operated clamping device, arranged in the Y-direction and adjustable in the X-direction via one positioning axis each, BLUM tool measurement. Machine can be inspected under power.

Condition: ready for operation (used), Year of construction: 1998, Travel X/Y/Z: 3200mm/300mm/250mm, speed: 18000rpm, motor power: 7.4kW, tool holder: SK30, tool positions: 8, tool changer: turret, materials processed: aluminum/steel (max. 5mm thick)/PVC (steel-reinforced and unreinforced), wood and plastics. Documentation available. On-site inspection is possible. Rodpfsuzlfasx Adbebt

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 12100mm/2350mm/800mm, swivel A-axis: +/-98°, rapid traverse X/Y/Z/A: 45/45/24/10 m/min, processing length: 11000mm, speed: 24000 rpm, table: 10 support crossbars, 2 hydraulically swiveling workpiece stops, control: BWO 930, operating hours: 23792h, dimensions X/Y: 18300mm/6250mm. Including moving gantry version with Gentry drive on both sides, coolant spraying system with minimum quantity fine atomization. Documentation available. Rbsdpfx Adstqfqxjbot

Condition: excellent (used), CNC INFOTEC Machining center Model: 3121 3-axis Year of production: 2016 Machine working area dimensions for axes X and Y: X: 2200 mm Y: 3100 mm Head stroke in the Z axis: 250 mm Machine working speed X, Y, Z: X: 60m/min Y:60m/min Z:12m/min Vacuum table Rodpfx Adjun Rqyobebt Price of a new machine: approx. 75.000 € Price: 27.900 €

Condition: new, Year of construction: 2025, table width: 450 mm, table length: 900 mm, table load: 500 kg, spindle speed (min.): 8,000 rpm, number of spindles: 1, VMC 650 CNC machining center, milling machine with CNC system VMC 650 machining center is a multifunctional equipment that allows you to perform milling, drilling, thread cutting, and turning operations in automatic mode (if these options are available in the machine). The VMC 650 milling machine can have 16- or 24-position tool magazine. Depending on the customer's wishes, the milling machine can be equipped with a GSK, Siemens or Fanuc CNC system. It is possible to optionally add a Y-axis drive. As a very convenient additional option, we recommend installing a chip conveyor that will save you time when working with the equipment. Technical parameters: Worktable size 900x450mm Maximum workpiece weight 500 kg Movement along the axes X/Y/Z 800/450/500 mm Maximum distance from the spindle to the table surface 120-620 mm Motor power 5.5-7.5 kW Maximum spindle speed 8000 rpm Spindle type BT40 Positioning accuracy ±0.008/300 mm Repeatability ±0.005 mm Machine dimensions 300022752550 mm Machine weight 4000 kg Rodexc I Dgopfx Adbsbt It is also possible to supply CNC milling machines, machining centers with other table sizes: VMC 850 table 1000x500 mm VMC 855 table 1000x550 mm VMC 1060 table 1200x600 mm VMC 1160 table 1200x600 mm VMC 1275 table 1300x700 mm VMC 1370 table 1400x700 mm VMC 1580 table 1600x800 mm VMC 1680 table 1700x800 mm VMC 1890 table 2000x900 mm

Condition: not inspected (used), Year of construction: 2013, functionality: unexamined, machine/vehicle number: 131057, overall weight: 6,900 kg, number of axes: 3, Equipment: chip conveyor, cooling unit, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Rodpfxoyaqlie Adbobt Number of axes: 3 Tool changer: 30 positions Control: SIEMENS Sinumerik 828D MACHINE DETAILS Machine weight: 6,900 kg EQUIPMENT Chip conveyor Cooling units

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, machine/vehicle number: ML 964F08, controller manufacturer: Siemens, controller model: SIEMENS Sinumerik, number of axes: 3, Equipment: chip conveyor, No minimum price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of axes: 3 Control: SIEMENS Sinumerik Rbodpfx Adeyaqi Ijbet EQUIPMENT Tool changer Chip conveyor

Condition: ready for operation (used), Year of construction: 2012, operating hours: 25,243 h, functionality: fully functional, machine/vehicle number: 12030320, travel distance X-axis: 810 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain TNC 620, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel X-axis: 810 mm Travel Y-axis: 400 mm Travel Z-axis: 500 mm Redpjyaq Siofx Adbjbt Table width: 900 mm Table length: 400 mm Spindle speed (max.): 10,000 rpm Number of spindles: 1 Number of tool magazine positions: 23 Tool holder: BT40 MACHINE DETAILS Control unit: Heidenhain TNC 620 Total weight: 3,500 kg Input voltage: 400 V Controller on-time: 25,243 h EQUIPMENT Documentation/manual Continuously adjustable speed Chip conveyor Internal coolant supply: 20 bar Disc wiper in coolant tank Air blast cooling through spindle or external External coolant gun Spiral chip conveyor Centralized lubrication

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, controller model: PHILIPS CNC 532, Equipment: chip conveyor, TECHNICAL DETAILS X-axis travel: 660 mm Y-axis travel: 500 mm Z-axis travel: 600 mm Table clamping surface: 630 x 500 mm Rbedsya Hcqjpfx Adbet Spindle taper: SK 40 Spindle speeds: 20 - 6,300 rpm Feed rate: 30 m/min MACHINE DETAILS Control: PHILIPS CNC 532 Internal coolant supply: 40 bar Total power requirement: 50 kW Dimensions & weight Machine dimensions: 4.98 x 2.78 x 2.93 m Machine weight: approx. 13.3 t EQUIPMENT Chip conveyor Coolant system Rotary pallet changer Hydraulic swivel head (horizontal/vertical)