Used Proline for sale (20)

Condition: excellent (used), Offer includes: Ti52 with 6 pockets, 2nd station with 4 pockets, Tremat feeder, very good condition, year of manufacture 2009, including SAK-52 stacking device, VFZ52 available as an option. Bwodpfx Aozmp Nrobtet

Condition: used, mileage: 1,78,613 km, power: 118 kW (160.44 HP), first registration: 06/2010, fuel type: diesel, overall weight: 4,600 kg, next inspection (TÜV): 09/2028, color: white, gearing type: mechanical, emission class: euro5, Year of construction: 2010, Equipment: air conditioning, Internal vehicle number: G170470 Available immediately at our yard in Kaufungen More information at: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) The auxiliary battery needs to be replaced. Sewer inspection vehicle RCA proline with satellite inspection system Vehicle features: - Mercedes-Benz Sprinter 516 CDI, panel van, color: white - First registration: 06/2010, registered as a self-propelled working machine, green license plate - Wheelbase: 4025 mm - Gross vehicle weight: 4,600 kg - Engine power: 160 hp - Reinforced front axle (spring + damper) - Reinforced front axle stabilizer - Rear axle stabilizer under the frame - Reinforced shock absorbers - Roof and rear door, tall version - Auxiliary hot air heater - Rotating beacon, yellow, front left/rear right - Rear door, two-wing, 270 degrees - Mileage: approx. 178,613 km TV inspection system - RCA proline with satellite - Control unit RCA proline - Cable drum ELKA 600 with approx. 380 m of camera cable - Cable drum K15 sync. with approx. 120 m of camera cable and 1 separate push cable with approx. 40 m - Swivel jib with winch for lowering the camera/carriage - 1 carriage L 135 for main pipes DN 135 to DN 1500 - 1 carriage L 100 cross DN 100 - DN 500 - Additional lighting, halogen, inclination measurement, and deformation measurement - M-series, satellite inspection DN 135 - DN 1500 - Computer package with monitors - Rear view camera with monitor for the driver to position the vehicle when the rear doors are open - Water tank - Power supply via gel batteries Financing example: * Internal number: G170470 * Purchase price: 29,500.00 € * Down payment: 10% * Term: 60 * Monthly rate: 468.31 € Residual value: 5,980.00 € Bodpfx Abozpcx Estjwt If you are interested in this offer or would like to adjust it to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is possible directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, Saw blades for the professional, machine-based processing of solid wood, wood-based materials and other suitable materials. Technical data: - Blade: HW WZ Z72 - Cutting circle (ø): 494 mm - Bore: 30 mm - Width: 3.7 mm - Material: Steel Bwodpfx Aszrx T Rebtet

Condition: new, Year of construction: 2026, operating hours: 4 h, functionality: fully functional, power: 18.5 kW (25.15 HP), overall weight: 1,250 kg, total length: 1,750 mm, total width: 1,200 mm, total height: 1,640 mm, working width: 630 mm, input voltage: 400 V, control cabinet height: 200 mm, control cabinet length: 600 mm, control cabinet width: 600 mm, number of blades: 30, rotational speed (max.): 100 rpm, rotor diameter: 260 mm, rotor width: 630 mm, sieve perforation: 15 mm, type of input current: AC, warranty duration: 12 months, Equipment: documentation/manual, Hacker waste material shredder, wood shredder, chipper, shredder MHR630 proline The MHR proline series comprises robust and energy-efficient wood shredding machines designed for reliable continuous operation in commercial environments. These ready-to-connect shredders offer high performance, low energy consumption, and excellent value for money. This makes them ideally suited for craft businesses, recycling companies, and industrial operations seeking an economical yet powerful solution. The machines are manufactured in our factory in Germany and sold directly. Advantages: - Continuous, uniform shredding process - High performance with low energy consumption - 2 knife rows for increased throughput - Robust construction - Larger feed opening - Excellent value for money - Ready to connect Bwedpfx Ajzumuzobtot - Siemens PLC controlled - MHR630 proline Rößler waste material shredder – “Made in Germany”

Year of construction: 2003, condition: excellent (used), For sale: KURTZ cutting line mod.VBR-S3 (Complete set: cutting KURTZ mod. VBR-S3, KUKA selection robot, packaging VIRO mod. PPZA-1300/24/MZG, palletizing, wrapping) EPS block cutting line with maximum dimensions of 5000x1200x1200. A block option of 600x1200x2400 is also available Complete line in "U" arrangement, consisting of: - Block buffer loading by dump truck - Horizontal cutting with automatic wire positioning, with double-frame cutting and oscillation - Polystyrene waste/scrap removal system: top, bottom, sides - Side cutter with manual wire positioning - Down cutter with automatic wire positioning - Anthropomorphic robot for product selection - VIRO packaging machine - Rotation of packages for cross stacking - It is possible to palletize different size polystyrene boards on wooden pallets or on glued polystyrene strips under the column with stacked polystyrene packages Bsdpjuct Upjfx Abtowt - Automatic stacker/palletizer for creating columns up to 3 meters high and up to 3 meters long - Vertical wrapping machine for automatic stretching of columns of polystyrene packages - Complete with inkjet printers and automatic labelers - Siemens S7 PLC controller - Complete with safety barriers with switch type protection - High-capacity line, in very good condition, requires an area of about 600 m2 (40m x 15m) - Year of manufacture: 2003 - Electricity requirements: 400V; 50 Hz; 115 kW; 300A

Condition: excellent (used), Zwick / Roell ProLine Z005 Universal Testing Machine Manufacturer: Zwick / Roell Bwedpfx Abjzfy Ivstet Type: ProLine Z005 / 5 kN ProLine Machine Type: Universal Testing Machine / Material Testing Machine Maximum Testing Force: 5 kN Load Cell: Xforce P 5 kN For sale is a used universal testing machine from the manufacturer Zwick / Roell. The machine is suitable for tensile, compression, and material testing in laboratories, quality assurance, research, and development. Technical Data Machine dimensions approx.: 917 x 439 x 1331 mm (W x D x H) Testing width: approx. 440 mm Frame width: approx. 720 mm Frame installation width: approx. 770 mm Machine weight approx.: 200 kg Power connection: 230 V Frequency: 50 / 60 Hz Power consumption: 3.5 A Connection: 1L / PE / N Made in Germany Load Cell Type: Zwick Xforce P Rated force: 5 kN Measurement start, Class 1: 20 N Measurement start, Class 0.5: 100 N Nominal measurement travel: 0.06 mm Protection class: IP54 Component height: 95 mm Installation dimension: approx. 72 mm Installation height: approx. 61 mm Diameter: 54 mm Weight: approx. 0.65 kg Connection thread: M28 x 1.5 Connection bolt: Ø 20 mm Dowel pin: Ø 8 mm Measuring Module Measuring module: DCSC Measuring range: 0.2 % to 165 % of the nominal measurement value Measurement value acquisition rate: max. 10 kHz Sensor supply: 10 V DC Strain gauge bridge resistance: 175 to 1200 Ω Equipment Zwick / Roell ProLine testing frame Xforce P 5 kN load cell DCSC measuring module Machine electronics PC system / testing software as shown in the pictures Accessories as shown in the pictures Application areas Tensile testing Compression testing Material testing Material characterization Quality assurance Research and development Laboratory applications Scope of supply Zwick / Roell ProLine Z005 universal testing machine Xforce P 5 kN load cell DCSC measuring module PC system / software as shown in the pictures Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures Inspection possible by appointment Availability: by arrangement. Scope of supply as shown in the pictures. Changes and errors in the technical data and prior sale reserved.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, For sale is a high-quality BOMAR Proline 420.350 H. This machine impresses with its robust two-column design, high cutting accuracy, and ease of operation. It is ideally suited for professional use in the steel trade, metalworking, mechanical engineering, and industrial manufacturing. Thanks to the stable guidance of the saw arm and the steplessly adjustable band speed, the machine enables economical and precise cuts, even with demanding materials. The Proline series is considered a reliable industrial machine with a long service life. Technical data: Manufacturer: BOMAR Model: Proline 420.350 H Type: Semi-automatic Design: Two-column band saw Cutting angle: 90° Max. round material: Ø 350 mm Max. rectangular material: 420 × 350 mm Saw band dimensions: 4,780 × 34 × 1.1 mm Band speed: steplessly adjustable 20–120 m/min Drive power: 3 kW Power supply: 400 V / 50 Hz Material support height: 780 mm Machine weight: approx. 800 kg Bjdpfezlz N Iox Abtswt Machine dimensions (L × W × H): approx. 2,325 × 1,197 × 1,997 mm Equipment: Robust two-column guide Steplessly adjustable cutting speed via frequency converter Hydraulic saw feed Automatic cutting pressure control Split full-stroke clamping device Carbide saw band guide Coolant system Chip brush Industrial design for continuous operation Condition: Used Technically functional Ready for immediate use Inspection under power is possible by appointment. Scope of delivery: Band saw BOMAR Proline 420.350 H 4m roller conveyor on the feed side 4m roller conveyor on the discharge side Manual measuring stop Operating manual (digital) Accessories as per inspection Inspection / Shipping An inspection of the machine is highly recommended. Loading can be supported upon agreement. Transport can be arranged upon request. Errors, changes, and prior sale reserved.

Condition: new, functionality: fully functional, Endress + Hauser Proline T-Mass 651-30AB1AD1AAABCA Thermal Mass Flow Meter Bwjdpfeznw Hzsx Abtjt 6 pieces available Brand new, unused, ex stores stock. Sold as seen.

Condition: used, mileage: 94,336 km, power: 110 kW (149.56 HP), first registration: 04/2008, overall weight: 3,500 kg, fuel type: diesel, color: white, gearing type: mechanical, emission class: euro5, total width: 1,993 mm, total height: 3,000 mm, number of seats: 2, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, ++ BUY ++ BUY ++ BUY ++ BUY ++ BUY ++ BUY ++ Mercedes Benz Sprinter 315 CDI with Rausch TV inspection system - RCA Proline with Sat Installed equipment: * RCA Proline control unit * ELKA 600 cable drum with approx. 250 m camera cable (renewed 2019) * Quattro SAT cable drum with approx. 90 m camera cable and 2 separate push rods approx. 18 m each * Swivel jib with winch for lowering camera/crawler * 1 crawler 1500 with KS200 head for main pipes DN200 to DN1500 * 1 SAT crawler with KS200 head and 2x KS60 SAT cameras Bwedozit Ukepfx Abtjt * 1 crawler 1100 DN100 - DN250 * Additional halogen lighting, inclination and deformation measurement * Flushing device for cleaning house connections (add-on part) * Computer package with monitors (software for vehicle and office workstations included) * Reversing camera with monitor for driver for positioning vehicle with rear doors open * Water tank * Power supply via generator Chassis: * Mercedes Benz Sprinter 315 CDI, panel van, color: white * First registration: 04/2008, self-propelled working machine, green license plate * Fuel: Diesel * Wheelbase: 3665 mm * Engine output: 150 HP * Reinforced rear and front axles (shock absorbers) * Reinforced stabilizer front axle * High roof and high rear doors * Auxiliary hot-air heater, air conditioning * Amber rotating beacon front left / rear right / front * Rear door double-winged, 270-degree opening angle Special equipment: Rear door (270-degree opening angle), radio pre-installation, spare wheel with road tyres, spare wheel carrier under rear frame including jack, revolving beacons (2), passenger seat comfort, driver’s seat: comfort suspension, stabilizer rear, reinforced front stabilizer, reinforced shock absorbers, aux air heater (electric), partial limitation cargo area sliding door Additional features: Third brake light, driver's airbag, wash water level indicator, electrically adjustable and heated exterior mirrors, both sides, exterior mirrors with integrated indicators, 74 Ah battery, brake assist, driver's cab headliner, lockable glove compartment, body/build: high-roof panel van, child safety locks, fuel tank: main tank 75 liters, continuous partition in load compartment, load securing/tie down rings, headlight range adjustment, engine 2.1 liters - 110 kW CDI CAT, wheelbase 3665 mm, low-emission according to Euro 4 Gr. III emissions standard, sliding door right in load/passenger compartment, steel rims 6.5x16, service interval display Assyst, heat-insulating glass, permitted gross vehicle weight 3.50 t For further details and/or photos, please contact us directly. A wide selection of other vehicles for SALE or RENT can be found at: Specification, prior sale, and errors subject to change. The buyer is responsible for independently inspecting the condition and specification of the equipment. Year of manufacture for the chassis and the inspection system/superstructure may differ. Sale is strictly in line with our terms & conditions and with all warranties excluded.

Condition: excellent (used), Year of construction: 2021, PROLINE 2040 Axis-Movement: X-Axis: 4.250 mm Y-Axis: 2.000 mm Z-Axis: 200 mm included options: - 1x 5-axis cutting head with automatic taper compensation - Height sensor with anticollisionsensor - Software IGEMS - Automatic tank cleaning with dredge - Abrasivtank and automatic abrasive doser Bwedpfx Aogb Rklebtst

Condition: used, -Serial number: 19200044 -Year: 15/01/2019 -Production: up to 1800 pieces/hour -Max dough piece weight before elongation in g: 700 -Max dough piece weight before rounding in g: 550 -Trough length in cm: 30 -Trough width in cm: 13 Bsdpfx Abowxymzstewt -Number of troughs: 90 -Number of usable troughs: 65 -Capacity (pieces/hour): 960 1200 1400 1800 -Resting time in min: 5:00 3:15 3:00 2:00 -Voltage: 400V -Power: 4.8 kW

Condition: new, Year of construction: 2020, 1x New Endress & Hauser Promass E 300 and also 1x New Endress & Hauser Promass F 80 Bwedpfsxtvfmjx Abtjt

Condition: new, Year of construction: 2026, Double line and fitting drilling machine in SYSTEM 32. Line boring machine with 2 drilling units each with 25 precision drilling spindles. Bwodpfxedxz Nte Abtet Short introduction: • Row of holes as well as line drilling in the SYSTEM 32 mm • 50 (2 x 25) holes in one drilling cycle • Drilling depth correction for different drilling depths • Massive precision drilling unit from GANNOMAT • Furniture connector and hinge drilling (option) • Optional 3rd drilling unit

Condition: used, Year of construction: 2023, functionality: fully functional, overall weight: 1,930 kg, Binderberger GI25EZ proline horizontal meter log splitter Year of manufacture: 2023 Weight: 1,930 kg Bsdpfx Absyg I Dpotowt Operation: electric or PTO Towable with secondary registration plate up to 25 km/h Splitting length: 130 cm Splitting speed (cm/s): forward: 25/27, return: 23/25

Condition: used, mileage: 2,62,291 km, power: 132 kW (179.47 HP), first registration: 06/2009, fuel type: gasoline, gearing type: automatic, Year of construction: 2009, Equipment: ABS, air conditioning, central locking, navigation system, = Additional Options and Accessories = - Radio/CD player = Additional Information = Unladen weight: 1,600 kg Bwedpfxjzvqf Tj Abtjt Damage: none License plate: 11-JKL-2

Condition: ready for operation (used), Year of construction: 2004, The Maier ML 32 D pro Line with FMB mounting is a highly precise, CNC-controlled CNC long-turn lathe (Swiss-type) for demanding metalworking applications. Technical data: Main and counter spindle • Maximum turning diameter: 32 mm • Maximum spindle bore: 32 mm • Maximum spindle travel (turning length): up to 310 mm • Spindle speed (main & counter spindle): up to 6,000 rpm • Spindle power (main spindle): 5.5 kW • Spindle power (counter spindle): 3.7 kW • C-axis: Available on both the main and counter spindle (0.001° or 5° mechanical indexing) Bodpfx Abjy D Nwajtswt Axes and control • Number of axes: 9 controlled CNC axes (X1, Z1, Y1, C1, X2, Z2, C2, X3, Z3). • Rapid traverse speed: 32 m/min. • CNC control: MAIER PRO - GE FANUC (Fanuc 18iT) Tooling system and machining • Total number of tool positions: Up to 24 tool stations (depending on the configuration, up to 16 of these are powered/rotating). • Cross-working: Typically 5 to 6 fixed turning tools (shank cross-section 16x16 mm) and 4 powered stations. • Back-working: Available for simultaneous machining on the main and counter spindle. Dimensions and weight • Machine weight: approx. 3,800 kg to 4,200 kg (machine weight only, excluding bar feeder). • Dimensions (L x W x H): approx. 2,640 mm × 1,600 mm × 1,900 mm. • Coolant capacity: approx. 240 liters

Condition: new, functionality: fully functional, machine/vehicle number: 15162333, empty load weight: 620 kg, maximum load weight: 2,380 kg, overall weight: 3,000 kg, axle configuration: 2 axles, permissible axle load (axle 1): 1,500 kg, permissible axle load (axle 2): 1,500 kg, loading space length: 4,150 mm, loading space width: 2,050 mm, loading space height: 350 mm, total length: 5,565 mm, total width: 2,100 mm, tire size: 13 Zoll, tire condition: 100 %, trailer brake: trailer braked, Year of construction: 2026, Loading dimensions approx. 2050 mm x 4150 mm Bodpoy I Tnqefx Abtewt External dimensions approx. 2100 mm x 5565 mm Permissible total weight: 3000 kg Payload: approx. 2380 kg (payload may vary depending on additional equipment) Manufacturer: Variant Special features - Variant High-loader Pro Line 3021 P4 - 350 mm aluminium drop sides (foldable/removable) - 10 lashing eyes in the floor frame profile, rubber-coated, 500 daN (kg) - Toolbox mounted (front right side under the loading area) - Ramp compartment (ramps not included, available as accessory) - Removable steel corner posts - Removable H-frame - Vehicle registration documents included Additional equipment - Flooring: phenolic resin-coated non-slip and waterproof plywood - Welded steel frame - Reinforced cable (spiral cable) - Internal long lever fasteners Chassis - Knott rubber torsion axle | V-drawbar with ball coupling | heavy-duty automatic jockey wheel | automatic reverse system Electrics - 12 Volt | 13-pin plug | side marker lights | position lights

Condition: used, mileage: 2,57,232 km, power: 120 kW (163.15 HP), first registration: 03/2013, fuel type: diesel, overall weight: 4,600 kg, next inspection (TÜV): 09/2028, color: white, gearing type: mechanical, Year of construction: 2013, Equipment: air conditioning, Internal vehicle number: G300109 Available immediately at our yard in Kaufungen. More information at: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Sewer inspection vehicle RCA proline with satellite inspection system Vehicle features: Bwodpozpcx Sjfx Abtjt - Mercedes-Benz Sprinter 516 CDI, panel van, color: white - First registration: 2013, registered as a self-propelled work machine, green registration - Wheelbase: 4025 mm - Gross vehicle weight: 4,600 kg - Engine power: 160 hp - Reinforced front axle (spring + damper) - Reinforced front axle stabilizer - Rear axle stabilizer mounted under the frame - Reinforced shock absorbers - High roof and rear door - Auxiliary hot air heater - Rotating beacon, yellow, front left / rear right - Rear door, two-leaf, 270 degrees TV inspection system - RCA proline with Sat - Control unit RCA proline - Cable drum ELKA 600 with approx. 380 m of camera cable - Cable drum K15 sync. with approx. 120 m of camera cable and 1 separate push cable with approx. 40 m - Swivel gantry with winch for lowering camera/carriage - 1 carriage L 135 for main sewers DN 135 to DN 1500 - 1 carriage L 100 cross DN 100 - DN 500 - Additional halogen lighting, inclination measurement and deformation measurement - M-series, satellite inspection DN 135 - DN 1500 - Computer package with monitors - Rear view camera with monitor for the driver to position the vehicle when the rear doors are open - Water tank - Power supply via gel batteries Financing example: * Internal number: G300109 * Purchase price: € 39,500.00 * Down payment: 10% * Term: 60 * Monthly rate: € 624.93 Residual value: € 7,980.00 If you are interested in this offer or would like to adapt it to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors and omissions excepted. We will gladly accept your used vehicle in part exchange. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: AFMAAAABABAA+, The Coriolis Mass Flowmeter Proline Promass 83F, manufactured by Promass in 2011, is a precision instrument designed for accurate mass flow measurements in various industrial processes. This model, designated as 83F1H-3967/0 with serial number E710E302000, has a nominal size of DN100 (4 inches) and is equipped with a hygienic process connection DN100 DIN 11851, making it suitable for applications requiring sanitary standards, such as dairy processing. Bwedpsy Anhzjfx Abtet Constructed from high-grade stainless steels 1.4404/316L and 1.4539/904L, the device offers durability and corrosion resistance. It is rated for a nominal pressure (pnom) of 25 bar and operates in a process temperature range from -50°C to +200°C, with an ambient temperature tolerance from -20°C to +60°C. The flowmeter's housing features IP67 and NEMA/Type 4X protection ratings, ensuring resistance to dust and immersion in water. Sensor calibration includes a K factor of 1.6287 / 51 and a density accuracy of 0.0005 g/cc. The surface finish meets hygienic standards, featuring a roughness of 0.8 µm (150 grit). The unit is powered by a voltage range of 20-55 VAC or 16-62 VDC, consuming 15 VA/W at a frequency of 50-60 Hz. The housing shows some surface wear and minor dents, and the label exhibits slight wear but remains mostly legible. It is mounted on a wooden pallet and is equipped with attached braided cables with yellow markings and black cable ties. Some dust accumulation is visible on the flowmeter body, indicative of prior use. This Promass 83F flowmeter is suitable for precision mass flow measurement in the pharmaceutical, chemical, and food industries, particularly where hygienic conditions are required.

Condition: excellent (used), Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN Type: BT1-FB010TN.D30 For sale is a professional material testing machine from Zwick / Roell, suitable for tensile and compression tests up to 10 kN. The machine comes from industrial use and has been professionally maintained. General Data: Manufacturer: Zwick GmbH & Co. KG, Ulm Rated Force: 10 kN Type of Testing: Tensile and Compression Testing Technical Specifications: Crosshead speed: 0.001 – 1,000 mm/min Speed accuracy: 0.01% of Vnom Position resolution: 0.038 µm Position repeatability: < 2.0 µm Maximum test frequency: 0.5 Hz Data acquisition rate: 500 Hz Measured value transmission to PC: 10–100 Hz Force measurement according to ISO 7500-1 Dimensions & Weight: Height with leveling elements: approx. 1,331 mm Width with electronics: approx. 930 mm Depth with electronics: approx. 437 mm Work space width: 440 mm Work space height below: 1,050 mm Weight with typical fixtures: approx. 160 kg Electrical Data: Input voltage adjustable: 100–250 V Mains frequency: 50 / 60 Hz Power consumption: 800 VA Current at 230 V: approx. 3.4 A Protection: ≤ 16 A Connection: 1L / PE / N Documented Test & Calibration Records: 18.09.2017 Machine BT1-FB010TN.D30 testXpert II Version 3.2 tC-PC System Testing temperature: 23.3 °C Travel measurement system: incremental encoder (rotary) Force transducer installed 29.01.2014 Force transducer: Xforce HP Module: DCSC Calibrated at Zwick Ulm 28.08.2013 Force transducer: Xforce P Module: DCSC Rotation before test series: 120° testXpert control Documented service and calibration records are available. Software & Control: Software: testXpert® II Documented version: V3.2 Installation documentation from version 2.2 Documentation status: March 2010 PC control: tC-PC Interfaces: RS232 / Ethernet Note: testXpert II is a professional industrial testing software. Installed Modules & Components DCSC measurement module Force transducers Xforce P / Xforce HP Incremental encoder (rotary position measurement system) ISO 7500-1 compliant force measurement Installed under crosshead Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: Bwodpfozizrkjx Abtjt Material testing machine BT1-FB010TN.D30 PC with monitor Force transducer DCSC module Clamping fixtures / grips Adapters and brackets Tools Documentation folder with records Scope of delivery as shown in the pictures. (Subject to changes and errors in technical data and specifications!)