Used Quenching Press for sale (12,515)

Condition: ready for operation (used), number of spindles: 4, - Benchtop model - 4 drilling spindles - Foot switch - 380/400V 50Hz Ledpezv D D Njfx Ahtehk 4 new drive belts have been installed.

Condition: used, Year of construction: 2011, Used Equipment Year of Manufacture: 2011 Condition: Currently installed Equipment and Technical Data: -Filter housing base ring NFHSU 9/9 with discharge chute for press - Discharge: 1.1 kW - Storage volume in the base ring approx.: 3.25 m³ - Dimensions L x W x H (incl. base ring) 2440 x 2440 x 900 mm - Ground clearance: 350 mm - Conveyor screw for briquetting press 0.75 kW - Extension and expansion rings are optional; max. storage volume approx. 12 m³ - Extension and injection ring NFHSU for 9/9 and 10/10 Jet, L x W x H: 2480 x 2480 x 500 mm - Expansion ring for NFHSU 9/9, 2480x2480x700 mm, with inspection door and type-tested explosion flap - Filter for filter housing NFHSU 9/9/20, filter area 116 m²: The Nestro filter system NFHSU is a solid filter construction made of 4 mm galvanized steel sheet and is designed for outdoor installation and weather resistance. This filter system is particularly robust and designed for underpressure operation up to -3,500 Pa. The filter system is equipped with upper and lower inspection doors 600 x 600 mm, with automatic filter regeneration, dry extinguishing system, differential pressure switch / volumetric flow monitoring and the necessary explosion protection. Note: Filter is equipped with high-quality filter material, BIA category M, antistatic, residual dust content < 0.1 mg/m³ and suitable for return air operation. Further technical data: - Filter tube length: 2,000 mm - Filter tube diameter: 230 mm - Number of filter tubes: 81 - Filter area: 116.0 m² - Filter regeneration: automatic/motorized - Number of vibrating motors: 4 pcs - Fan shroud for NFHSU 9/9 including inspection door - Fan US-FHN (clean gas) 22 kW 16,400 m³/h - 3,200 Pa: A Nestro high-performance fan with above-average efficiency and high energy saving potential when using a frequency inverter (optional). The robust welded construction is primed and painted in RAL 5015. The fan is delivered as standard with an inlet cone and backflow damper. Technical data at a glance: - Volumetric flow: 16,400 m³/h - Corresponding underpressure: 3,200 Pa - Electric motor: 22 kW / 400 Volt / 50 Hz - Speed: 3,000 rpm - Design: B5 - Pressure nozzle: without - Application area: Nestro underpressure filter and others - Injection nozzle d= 400 mm with flange ring - Injection nozzle d= 350 mm with flange ring - Backflow damper d= 350 mm with flange edge - Backflow damper d= 400 mm with flange edge Lhodpfx Ahszvz Tbjtok - Briquetting press C150; 30 - 50 kg/h, hydraulic unit 5.5: Technical data: - Power consumption (hydraulics): 5.5 kW - Briquette diameter: 50 mm - Weight: 650 kg - Briquetting performance with a bulk density of approx. 250 kg/m³, material-dependent: 30 - 50 kg/h - Ground clearance with base frame (art. no. 710300): 350 mm - Briquetting press, dust-proof - Briquetting press complete with hydraulic solenoid valve control for automatic operation, oil tank with 100 l oil, in welded construction, including main cylinder, stuffing cylinder, gripper cylinder, pressing jaw, electrical control panel with fully automatic control and 5 m cable The press is standardly equipped with: Monitoring switch for oil temperature, hardened press bushing, connection part for briquette line and automatic briquette length adjustment

Condition: new, The Press block feeder is a reliable machine suitable for unloading composite pallet blocks for the production of pallet legs. The PBF can simultaneously unload from two pallets of composite pallet blocks to one or two conveyors. Like the other gantry robots, the PBF is user-friendly and has the same type of interface as the rest of Mychrome’s equipment. The grip sheet is automatically removed and placed in a waste container. Machine specification: Standard performance Operators: 0 Lodpfewduuwex Ahtohk Length: 5 m Width: 2,5 m Height: 3 m Power: 10 kW, 3x400 V+N Pneumatic system: 7 bar compressed dried air: 100 L/min Should be filled and controlled: Container for lubricating oil Machine capacity: 36 blocks per minute (one type of blocks) Standard equipment: - 1 gantry robot with operator panel - 1 vacuum gripper

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei Lhsdpfxsynm Nmo Ahtok 17850 € 342.72 € 100 to fix 1020 mm 300 mm 1020 mm 680 mm 9 mm/s 5 mm/s 10 mm/s 6 mm 500x1020 mm 100 mm 190 mm 2110 mm 1000 mm 2275 mm 2082 kg 2 guidings big upper tool holder and table with t-slots upper and lower pressbrake tool manometer rapid down move with automtic change to working speed piston stops in every position 2 hand panel AND FOOT PEDAL Tisch höhenverstellbar according to CE regulations user manual in GERMAN and ENGLISH

Condition: used, Year of construction: 1989, total length: 1,600 mm, total width: 1,700 mm, total height: 2,750 mm, Empty weight: 4.000 kg - Year: 1989 - Documentation available: No - CE certificate present: No - Serial number: 4414 - Drive system: Conventional - Press force [ton]: 63 - Min. stroke [mm]: 8 - Max. stroke [mm]: 100 - Table length [mm]: 800 - Table width [mm]: 560 - Ram width [mm]: 300 - Motor power: 5.5kW - Transport dimensions: 1600mm x 1700mm x 2750mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Lsdpfxex Dkfpo Ahtjhk Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 1995, Press force: 320 kN Stroke frequency: 1,100/min Ram stroke: 3–50 mm Ram adjustment: 50 mm Drive power: 19 kW Table length: 760 mm Including soundproof cabin Including control cabinet Including BANDMOTION servo feed Lhedpfexcmkfex Ahtok Including KEYENCE camera monitoring Including decoiler The machine is in very good condition and immediately available

Condition: repair required (used), Year of construction: 1998, Max. tool size: 1,600 x 1,300 x 1,700 mm Max. table load: 17 tons Clamping force: 1500 kN Opening force: 750 kN Drive power: 25 kW Lodpfxjzkigre Ahtjhk Machine weight: approx. 30 tons

Condition: used, Buchformpresse / Book Forming Press Kolbus FE Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Ljdpszu Dnljfx Ahtehk On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Dimensions: approximately 2500 x 1200 x 600 mm, semi-hydraulic, with electro-motorized adjustment of the press wall. Storage location: Nattheim. Lodpjzd Hm Nsfx Ahtehk

Condition: ready for operation (used), Year of construction: 2008, pressing force: 66 t, stroke length: 200 mm, throat depth: 400 mm, total width: 2,650 mm, total height: 2,400 mm, overall weight: 5,800 kg, Equipment: CE marking, Hydraulic press brake Manufacturer: TRUMPF, Type: TruBend 3066 Year of manufacture: 2008 Technical data Manufacturer: TRUMPF Type: TruBend 3066 Year of manufacture: 2008 Bending length: 2040 mm Lhodpfx Ahezu Tawstsk Press force: 66 t Free daylight between uprights: 2364 mm Throat depth: 400 mm Stroke: 200 mm Y-axis rapid traverse speed: max. 200 mm/s Y-axis working speed: max. 15 mm/s Drive power: 17 kW Dimensions: L 2.65 x W 1.85 x H 2.40 m Weight: 5650 kg Equipment - Electro-hydraulic upper drive - Block hydraulics - Controlled axes: Y1, Y2, X, R, Z1, Z2 - Automatic upper and lower tool clamping - Self-adjusting crowning system - Control system: Delem - Light curtain at the front for laser safety - Foot switch - Tool package consists of: Upper tool, straight, 28°, R1, 2000 mm, segmented Lower tool, V10, 84°, H100, 2000 mm, segmented All information is subject to change without notice.

Condition: excellent (used), Year of construction: 2021, operating hours: 1,118 h, functionality: fully functional, HSM baling press, type HL 7009 ST/A, year of manufacture 2021 Technical data: Manufacturer: HSM Type: HL 7009 ST/A Year of manufacture: 2021 Operating hours: 1118 Pressing force: 70 t Specific pressing force: 58 N/cm² Drive power: 11 kW Feed opening: 1020 x 900 mm Bale size: 1100 x 1100 mm (W x H x D) Bale weight: up to 600 kg Tying: 4-way horizontal, manual Machine dimensions: 5992 x 2066 x 2394 mm (L x W x H) Weight: 7500 kg Lodszvluvepfx Ahtshk Materials: Paper, cardboard, film Note: The press is in good condition and has been inspected and tested by us. A video can be found on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without any warranty.

Condition: used, Digitaldrucker mit FS-612 Broschürenfinisher / Digital Printing Press with Broschure Finishing System Digitaldrucker / Digital Printing Press Konica Minolta Bizhub PRO C1060L Baujahr / Year 2016 - SN. A5VM021003546 Total Counter 137.408 Sheets, Duplex 33.008 Auflösung / Resolution 1.200 x 1.200 dpi x 8 bit Papiergrammatur / Paper grammage 62–300 g/m² Autom. Schön- und Widerdruck / automatic Perfection 62–300 g/m² Papierformate / Paper Sizes 330 x 487mm Ledpfx Ahjzuyltotjhk Maximaler Druckbereich / max. Print Area 323 x 480mm Papiereingabekapazität / Paper Infeed Capacity Standard 1.500 Bögen -  max. 4.250 Bögen Papierausgabekapazität /  Paper Infeed Capacity Broschürenfinisher FS-612 max. 2.500 Bögen Heftfinisher FS-531 max. 3.000Bögen Ausgabefach OT-502: max. 15 Bögen Abmessungen des Basissystems 760 x 903 x 1.072mm Gewicht des Basissystems 291kg Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: like new (used), Year of construction: 1985, machine/vehicle number: 38754, functionality: limited functionality, operating hours: 200 h, pressing force: 250 t, This plate bending machine was installed new in 1989 and was used for 200 Hrs and never used ever since. The mechanical parts are fully functional and are in perfect condition but the electrical board needs fixing. Force: 250 mp (metric tons) Working Surface Length: 5600 mm Working Surface Width: 400 mm Working Surface Height: 100 mm Weight: Approximately 37,000 kg Press Sizes (LxHxW): 5700 x 3150 x 5200 mm Ledpfx Ahjykl Iajtohk

Condition: used, Year of construction: 2008, functionality: fully functional, 1 x used 72/80-page web offset printing press Manufacturer: manroland Model: Lithoman IV Year of construction: 2008 Web width: 2060mm Section length: 620mm Cylinder circumference: 1240mm Max. speed: 42,500 cph Running direction: left-to-right Description: 1 x web winder MEGTEC DLC 3200 with web feed AUROLOAD 4 x printing units manroland with PPL and Baldwin Impact Fusion blanket washing system 1 x dampening system technotrans delta.d 400W 1 x hot air dryer Contiweb Ecoset/T 15.3m with integrated afterburner (retrofitted in 2020) 1 x ink density control system GMI ColorQuick 1 x cut register control manroland CutCon Lsdpfxszvyxcj Ahtshk 1 x color register control manroland 1 x superstructure with 5 lay units 1 x 2nd feeder (baby feeder) 1 x folding unit PFI 5S, 2:5:5 with positive feeder and magnetic brake (MT folding) 1 x saddle stitcher Tolerans 1 x cooling unit Axima i-Cool 1 x control system PECOM-X optional: 1 x disposal line RIMA System with cutting modules RS840, cross-lay unit RS36S and RS400 robot/palletizing system

Condition: good (used), Year of construction: 1978, Hydraulic press, two-column press, oil hydraulic press, hydraulic press, high-speed press, high-speed hydraulic press -Manufacturer: Hans Schoen, Hydraulic press type SH 100 -Pressing force: 100 tons -Motor: 11 kW -Clamping table: 580 x 440 mm / Bore Ø 150 mm -Max. insertion height: 435 mm -Projection: 650 mm -Max. stroke: 150 mm Lsdpjyzd I Uefx Ahtohk -Hole: Ø 50 mm -Documents: Operating instructions/circuit diagram -Dimensions: 1640/1300/H2650 mm -Weight: 4440 kg

Condition: like new (used), Year of construction: 2023, functionality: fully functional, PLEASE READ CAREFULLY!!! Ljdpfx Ajzvnpijhtshk THIS OFFER IS EXCLUSIVELY FOR EUROPEAN END CUSTOMERS, AND THE FIRST INQUIRY MUST INCLUDE COMPLETE CONTACT INFORMATION. THANK YOU. The forging line consists of a hydraulic 1500-ton forging press, an induction unit with 1200 kW, and a robot with a load capacity of 300 kg. So far, prototypes have been manufactured; however, the line was actually designed for series production, which has not yet taken place. The line was built and installed in 2023. The technical specifications are as follows: Hydraulic press 1500 tons (year of manufacture 2023) SIEMENS control system - Pressing force: 1500 tons - Retraction force: 120 tons - Downward stroke: 300 mm/s - Pressing stroke: 100 mm/s - Upward stroke: 300 mm/s - Installation height: 3,000 mm - Ram stroke: 1,500 mm (!) - Ram size: 1,600 x 1,600 mm - Table size: 1,600 x 1,600 mm - Ejection force / 1 position: 40 tons - Stroke: 600 mm - Ejection speed: 250 mm/s - Return speed: 250 mm/s - Stroke: 400 + 400 mm - Traverse speed: 200 mm/s - Ram positions: 3 positions Including a 1200 kW induction unit (year of manufacture 2023) MITSUBISHI control system - 1200 kW / 450 Hz induction unit for billets - Coil size: Ø 215 / Ø 150 mm, two sets of coils - Material feeding system Including a Kawasaki robot (6 axes) – Model: ZX300S-D- (year of manufacture 2023) - Max. load capacity: 300 kg - Max. reach: 2500 mm Sample images of the machines are attached.

Condition: good (used), Year of construction: 1981, operating hours: 376 h, functionality: fully functional, machine/vehicle number: 01031, total height: 3,200 mm, total width: 1,900 mm, total length: 2,500 mm, table width: 570 mm, table length: 670 mm, overall weight: 10,000 kg, clamping force: 400 kN, input frequency: 50 Hz, input current: 25 A, power: 7.5 kW (10.20 HP), REIS TUS 600 K Coating Press - Operating voltage: 380/260 V Attention: The item must be picked up between September 8 and September 10, 2026, on a date to be confirmed. Lodpjzlfb Iefx Ahtehk FCA D-63128 Dietzenbach - loaded onto a truck.

Condition: as good as new (ex-display), Throughput of up to a maximum of 50 kilograms per hour. Briquette diameter: 50 mm. Main motor: 4 kW. Lhodpfx Aozu Sknjhtjk Very compact design. Dimensions: 1,100 x 1,500 x 1,200 mm. Weight: 570 kg.

Condition: good (used), Year of construction: 2007, operating hours: 10,490 h, functionality: fully functional, Channel baling press Presto HPK 20/50 S, year of manufacture 2007 Manufacturer: Presto Type: HPK 20/50 S Year of manufacture: 2007 Operating hours: 10,490 (as of 08/2026) Ljdpfx Ahjzvbbrstehk Drive: 22 kW Pressing force: 50 t Feed opening: 1200 x 700 mm (L x W) Channel cross-section: 700 x 750 mm Feed volume, max. 0.63 m³ Cycle time: 23 s Tying: 3-fold, automatic Throughput capacity at 35 kg/cbm: 2.9 t/h 60 kg/cbm: 4.3 t/h 100 kg/cbm: 6.3 t/h Bale weight: up to 450 kg Machine dimensions: 760 x 1350 x 2350 mm (L x W x H) Machine weight: approx. 7,500 kg Materials: paper, cardboard, film Note: The press is in good condition and is currently still in operation. An inspection is possible by appointment. The machine will be available from the end of 2026. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is subject to change, subject to prior sale, and can be revoked at any time. Inspections are possible by appointment. The sale is made against prepayment, ex works, without warranty.

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: Ledpfjzvq Rcsx Ahtohk • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price: 35 000 EUR (VAT is not included)

Condition: ready for operation (used), GIZELIS ECCENTRIC PRESS 25 TONS IN VERY GOOD WORKING CONDITION Ledpozupqfsfx Ahtehk "Your Next Reliable Production Machine Starts Here"

Condition: used, Type EURO SPEZIAL Max. working width: 3250 mm Max. working height: 1850 mm 4 vertical + 2 horizontal hydraulic cylinders. Motor power of hydraulic unit: 1,5 kW 380 V Made in Germany 1978 Transport dimensions 4100x1100x2700 mm Weight 980 kg Price 2350 Eur (EXW Jonava, Lithuania) Ledpfx Ahjzvlncetshk

Condition: excellent (used), functionality: fully functional, 60 TONS HYDRAULIC PRESSBRAKE BENDING LENGTH 3000 MM Lhedpfx Ahsim Si Rstjk Excellent condition! "Your Next Reliable Production Machine Starts Here"

Year of construction: 2026, condition: new, Messan P07 - Pneumatic press for hole punching in reinforcement sheet iron - Working system - pneumatic - Opens holes for handle and lock holes - Punching molds are changeable - Maximum thickness of the sheet iron 1.50 mm Lsdpfxszugwco Ahtohk - Option - special mould for different forms

Condition: used, Year of construction: 1998, Used 2500 mm bending machine by Safan Type: SMK 50 2550 TS1 Capacity: 2550 x 50 tons TS1 CNC control Y1, Y2, X, R, Z1 and Z2 Lodpfezvyg Hjx Ahtshk Year of manufacture: 1998