Used Cold Press for sale (28,369)

Year of construction: 2002, condition: excellent (used), MULTI-PRESS MP.610 Itedpfx Aeh Rkhnoanjr 6 DIE 6 BLOW Perfect mechanics and electronics ! 12x80 mm 105 mm CUTOFF 170 ppm YEAR 2002 PERFECTLY WORKING AVAILABLE IN SPAIN SOME PICTURES AND VIDEOS AVAILABLE

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 013531, An efficient and economical lamination process is realized with the SMARTLAM CHK hot-cold transfer press system (Twin Stack series). The SMARTLAM CHK is a twin-stack system that offers higher efficiency and increased output compared to conventional single-stack systems. By using two presses—one for heating and one for cooling—cycle times and energy consumption are significantly reduced. Depending on the material and laminate structure, up to 4 cycles per hour can be achieved with the SMARTLAM when processing 10 laminate layers per level. Itodpfx Aexwdmajanjr It is possible to place multiple laminates side by side in a single cassette. In alternative short-cycle test operation, approximately 1–2 cycles per minute can be achieved with one laminate layer per cassette (without vacuum and without a pressurized preheating phase).

Condition: excellent (used), REF: MM5728 1 x Zumex Food Engineering commercial cold press juicer.  The Mastery represents Zumex’s cold press commercial system for all types of fruit and vegetable juices, leading the way with its crushing efficiency and power, thanks to its shredder discs and its Brushless motor. It also has a 11-ton press, which is more compact than any other press of its category to obtain quality juice. Technical specification ⚙️ ✅ Manufacturer - Zumex Food Engineering ✅ Model - MASTERY.  ✅ Serial number - 475186. ✅ Production capacity - from 30 L/h up to 110 L/H. ✅ Motor - Brushless. ✅ Deposit capacity - 3 litres. ✅ Dimensions - 940mm L x 735mm W x 1700mm H. Itedpfet Uim Hsx Aansr ✅ Touch Control Display - 4.3" Colour. ✅ Material - INOX. ✅ Pression Power - 11,000 kg.  Notes 🗒️ Suitable for soft fruit, hard fruit, vegetable greens or a mix of those three products.  Videos available on request. 

Condition: like new (used), Year of construction: 2018, functionality: fully functional, overall weight: 8,000 kg, SPECIFICATION MODEL CBF-103L(2018) NO.OF FORGING STATION 3 PORGING LOAD(KG) 8000 MAX.CUT-OFF DIA.(MM) Ø12 MAX.CUT-OFF LENGTH(MM) 192 MAX.OUT.PUT.(PCS/MIN) 140 P.K.O. STROKE(MM) 15 K.O. STROKE(MM) 162 MAIN ENGINE (HP) 30 CUT-OFF DIE DIA.(MM) Ø45*59L PUNDH DIA.(MM) Ø53*200L MAIN DIE DIA.(MM) Ø75*200L MACHINE WT.(KG) 19000 NORMAL SIZE OF BOLT(MM) 6-10 SHANK LENGTH OF BLANK(MM) 30-152 Itjdpfjv Iakmox Aansr

Year of construction: 2025, condition: new, Dimensions (L/W/H) 4500x1500x2000 mm Itodpfx Ajv A Hmdsanor Weight 6500 kg Total power requirement 2 kw

Year of construction: 2004, condition: ready for operation (used), Number of forming stages: 5, pressing force: 250t, max. wire diameter: 23mm, cutting length: 180mm, ejector stroke die/punch: 140/60mm, tool dimensions length/diameter knife: 70/56mm, die: 200/110mm, punch: 227/90mm, weight: 52t, with enclosure, an inspection is possible. Iedpjnl El Tofx Aanjtr

Condition: ready for operation (used), Technical characteristics Pressing dimensions Useful length: 6000 mm Useful width: 1300 mm Passage height 1000 mm with extension 500 mm Cylinder stroke mm Height floor / worktop 300 mm 1400 mm working height 12 independent trays Power and Motors Overall dimensions Iedpfxjt N Aums Aanjtr Lenght: 6750 mm Width: 2000 mm Height: 2600 mm Weight: 8000 Kg

Condition: excellent (used), Opening: 530mm Ijdpjv U A H Dofx Aanetr

Condition: reconditioned (used), Year of construction: 2023, shaft length under head: 200 mm, drawing speed: 75 mm/s, disc diameter: 14 mm, 2-shot cold press. FIDE EF-180 For the production of long screws Iedpfeqagpxox Aanetr Range: Diam.14x200 mm. Ppm: 75 Overhauled to new by HBR Ltd.

Year of construction: 2025, condition: new, Dimensions (L/W/H) 3480x1500x2000 mm Weight 5500 kg Itsdpfx Ajv A Hk Njaner Total power requirement 2 kw

Condition: ready for operation (used), Pressing force: 130t, max. wire diameter: 17mm, cutting length: 150mm, ejector stroke matrix: 125mm, ejector stroke stamp: 58mm. WZ dimensions length/diameter: blade: 80mm/50mm, die: 180mm/90mm, punch: 195mm/75mm. Weight without housing: 27t. Available from 26.08.2024. Itedsr I Abispfx Aansr

Year of construction: 2025, condition: new, Dimensions (L/W/H) 3750x1650x1970 mm Ijdpfx Aov A Hkpeanetr Weight 5000 kg Total power requirement 6 kw

Condition: as good as new (ex-display), Year of construction: 2018, saw blade diameter: 5,50,500 mm, Machine in perfect technical condition. Practically very little used. For processing aluminum and PVC profiles. Mitres possible in 3 levels and can be used as a splitting saw, manual adjustment of the horizontal saw blade by a maximum of 20 mm in front of the vertical saw blade. Notch options: rectangular, one-sided diagonal, two-sided diagonal, three-sided diagonal. Itodpfx Ajvtarneansr Processing of profiles up to 300, width up to 90 °, bevels up to 30 °. Notch depth horizontally up to 185 mm, vertically up to 210 mm at an angle of 90 °. Notch width at 90 °: 300 mm, profile height 280 mm Manual adjustment of the notch and height, positioning using mechanical digital displays. Vertical saw blade rotation range 30° – 90° – 30°, (front/middle/back) manual, positioning via digital display. Vertical saw blade rotation range 30° – 90° – 30°, manual, positioning via digital display. The material stop (table top) can be manually rotated left and right within the range of 30° - 90° - 30°, positioning via measuring scale. The material depth stop can be manually adjusted via the sliding carriage and manual clamp, positioning via digital display.

Condition: excellent (used), Year of construction: 1989, Pressta Eisele Emmegi Saw Isdpfsg R Ifgsx Aanetr 550mm discs EU shipping ~300 euros

Year of construction: 2007, condition: good (used), functionality: fully functional, We are offering pressing line for rapeseed/sunflower with prepress (FS1000 55kw), final press (FS1000 45kw) and full automatic filtration for oil, 10m2. Isdpfx Asxuafyeanstr It is made for double cold pressing, which is low energy consuming and completely natural, providing the oil without necessity for degumming, because phosphorus content is low. After that full automatic filtration will remove cake residues from oil, which can be safely stored without any damage. Capacity of the line 1.400kg/h, 32t/24h

Condition: used, machine/vehicle number: 008341, Max working length: 2480 mm Itjdpfxjx A Tf Ae Aansr Max working width: 880 mm No of Pressing cylinders: 4 No of Daylights: 1

Condition: new, Year of construction: 2024, Hydraulic H Frame Press with movable Plate Capacity: 400 Ton Controll : by 2 Hand Bottom Main Cylinder : Ø 430mm. Auxilitary Cylinder : 2 pcs. Ø 110 x 55mm. Main Motor : 37kw. - 75hp. ( IE-3 ) Pumpe : 140cc. - 204LT BOSCH/REXROTH Speed: Down-140mm/sec. Working Speed13 - 5mm/sec Upspeed:150mm/sec Daylight : 1000mm Stroke: 700mm Movable Plate: 1500x1000mm Itodopl Ugzjpfx Aanor Upper Plate : 1500x1000 Hydraulic: All the Hydraulic System will be top of the Machine Hydraulic System : BOSCH/REXROH Pressure & Speed Adjustment Side Cover doors Hydraulic Top Plate Lock system Mechanic Top Plate Lock System Automatic Lubrication System Oli Capacity : 1100 Lt Controller: Controller: SIEMENS S/7-1200 Electric Cabinet ( CE) Portable Control Panel Remote Connection System Security PLC Soft Starter Light Curtains on Front & Back Side Movable 2 Hand Control PLC Touch Screen: SIEMENS 12'' Working Area Ilimination 8 pcs free IN & OUT put-on PLC Movable Table: Stroke of the Movable Plate:1200mm Hydraulic Movement with external Motor and Pump Support Sliding System Table Paralelity: 0,05mm/ per m² All the Capacity,Dimentions and Options can be offered according to Customer Requirements Pls Contact us more Informations.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, total height: 5,000 mm, pressing force: 200 t, total length: 4,300 mm, installation height: 5,000 mm, total width: 2,250 mm, clearance between the columns: 1,000 mm, table length: 850 mm, operating pressure: 250 bar, spindle diameter: 400 mm, reverse speed: 567 mm/s, table width: 800 mm, year of last overhaul: 2018, overall weight: 16,800 kg, stroke length: 200 mm, space requirement length: 4,300 mm, space requirement height: 5,000 mm, Equipment: airbag, crane, Refurbished and Automated Mecolpress 200L Hot Forging Press (Siemens S7 Controlled) We are offering for sale our Mecolpress 200L fully automatic hot forging press system, which is currently operating in our production line. The machine underwent a comprehensive overhaul and modernization in 2018. The system has been upgraded to meet current production standards, including a renewed electrical system and a complete automation package. It is fully operational and immediately ready for production. Main Features and Benefits Itjdpsx E Untefx Aanor - Complete Overhaul: All mechanical and hydraulic components have been serviced, worn-out parts replaced, and the machine's performance restored to factory specifications, ensuring long-lasting and reliable operation. - Modernization (Siemens S7): The electrical system has been completely renewed with Siemens S7 PLC and latest-generation automation components, enabling precise control, easy fault detection, and modern production monitoring. - Fully Automatic Cell: All processes from furnace loading to forging and unloading are fully automated, minimizing human intervention and increasing productivity. - Complex Part Manufacturing: The 5-axis AP4 sub-press unit allows production of parts with complex internal geometries (such as valve bodies, Y-fittings, etc.) that cannot be manufactured with standard presses. - Production Ready: The machine is currently in active operation and will be delivered to the buyer with a custom die set (flange and 4 inserts). Technical Data - Pressing Force: 200 Tons - Strokes per Minute: 85 - Ram Stroke: 200 mm - Table Dimensions: 850 mm x 800 mm - Distance Between Columns: 1,000 mm - Pneumatic Cushion Force: 17.5 Tons - Total Weight: 16,800 kg - Main Motor Power: 25 HP Included Equipment The system is sold as a complete cell: - Mecolpress 200L Press (Refurbished, Siemens S7 controlled) - CP mod. 140-4P Heating Furnace (automatic loading conveyor, 4-guide system) - AP4 Sub-Press Unit (5th axis/angled punching capability) - Complete Rotary Automation System (loading arm, IR sensors, grippers, unloading spoon, lubrication system) - Custom Die Set (including flange and inserts as per your drawing) Since the machine is actively in production, it can be inspected by appointment and tested under working conditions.

Condition: good (used), Proofing press 55x65cm Antique The machine is in very good condition, can be used as an exhibit or as a printing machine. Max. format 550×650 mm Itedpfxju Umaio Aanor Weight 650 kg Flow table, system of claws holding the sheet. Electrically driven spreading roller.

Condition: excellent (used), Through-feed press for laminated wood Baioni Press Shelf length: 3000 mm Shelf width: 1300 mm Shelf heating via high-frequency generator Itodpfx Aaex Afvmensr CE certificate

Condition: used, Year of construction: 1996, functionality: fully functional, Lot consists of: (1) Hot forging press 360t with brass furnace, incl. FARM brass furnace Technical details: Eccentric press; 22 kW; capacity 360 t; Siemens control; tool dimensions 240x240 mm; strokes per minute: 55 1/min Itodpfx Aaexz A Rxsner

Condition: good (used), Letterpress printing press, foot operated Made in Germany Itsdpovac S Dsfx Aaner Fully original machine. A brilliant looking exhibit to put in a company lobby. A manually added piston. Rollers Format of the pressure 35x24cm

Condition: used, Year of construction: 1982, functionality: fully functional, Eccentric; 15 kW; Capacity 150 t; strokes per minute 120; ram stroke 175 mm Itedsxz A H Tjpfx Aansr

Condition: good (used), Columbian Press 1858 Letterpress Manufactured in Great Britain by Henry Watts Itsdjvbb Slopfx Aanjr Year of manufacture 1858. Can be used as a work machine or as a museum exhibit.

Condition: good (used), Bookbinding screw press 50×40 on a base The device is fully functional, ready to work. Format 500×400 mm Ijdpewud Saefx Aanjtr Pressure 5t