Used Rack And Pinion Cutter for sale (15,612)

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg Cedpfxjfdkbhs Addsrk - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: excellent (used), Diameter Ø 700 x 25 mm Codewz Nbmspfx Addork Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Year of construction: 1994, condition: ready for operation (used), Cutting force: 200kN, working width: 2500mm, cylinder width: 2600mm, cylinder diameter: 400mm, opening between the cylinders: 25-100mm, conveying speed: 11-44m/min, connected load: 7.5kW, weight: 3t, with documentation. Crjdsix Ahbopfx Addsk

Condition: used, cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter -Manufacturer: Sandvik Coromant, Secodex face milling cutter head shoulder milling cutter -Type: R290-160Q40-12M 848471 -Hole diameter: 40 mm / bolt circle diameter 66 x 14 mm -Dimensions: Ø 160 x 60 mm -Weight: 3.9 kg Credpfx Adeu Tytmedjk

Condition: used, Year of construction: 2004, Hydr. reversing Bale size 0.8 - 180 m / Cedpfx Asrxta Eeddork

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. Credpfxed Tbbdo Addjk The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, Cutter head, milling holder, carbide milling cutter, indexable insert milling cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter -Handover in current condition as seen -Condition see pictures Credpfx Adsqh Efbodek -Manufacturer: Sandvik Coromant, face milling cutter head shell milling cutter Ø 113 mm -Type: R260.22-100Q32-12H -Intake: SK50 -Dimensions: Ø 113 x 225 mm -Weight: 5.5 kg

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Crsdpfsqt Dmyex Addjk Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, Year of construction: 2019, operating hours: 11,169 h, Serial number: 18xxxx Please contact ATS Norway for more information Please provide reference number upon request: 18852 Specifications: Year: 2019 Hours: approx. 11,200 Weight: ~49,000 kg Power: 310 kW Crsdpfx Adevg A D Tsdok Full service history (Pon Equipment) Fine cone crusher Integrated screening unit Includes screen meshes Output fractions: 0–4 mm, 4–8 mm, 8–16 mm Large feed hopper with conveyor Lights Ready for delivery Description:High-capacity Metso LT220D cone crusher with integrated screen.Compact, mobile and easy to set up – takes approx. 30 minutes after transport.Can handle: 0–160 mm material through the screen 32–160 mm material directly into the crusher Well-maintained through service agreement with Pon.Includes several screen meshes and spare parts.Ready for immediate delivery. Hours: 11169 Own weight: 49000 Total Weight: 49000 Kw: 310 Model: Lokotrack LT220D Finknuser m/ sikt, matekasse og transportbånd

Condition: used, The used SSI Schäfer R3000 shelving system (item no. ZB361315) offers a high-quality solution for organized storage in workshops, warehouses, or industrial settings. Measuring approximately 13 linear meters in length, with a depth of 600 mm and a height of 2.49 m, this shelving unit features sturdy shelves (each 128 × 60 cm, load capacity up to 150 kg) across 6 storage levels. The frames are galvanized and pre-assembled—ideal for quick and effortless installation. The shelving system is available directly from stock—perfect for anyone looking to purchase a robust, sustainable racking system second-hand. Please note: The shelving described is an example. The SSI Schäfer R3000 shelving system is modular and can be individually configured to your required length—fully tailored to your needs. Cedpfjx Diyrsx Addsrk PRODUCT DETAILS: - Height: approx. 249 cm - Depth: approx. 60 cm - Length: approx. 1300 cm - Shelves: approx. 128 x 60 cm, galvanized - Load capacity: 150 kg per shelf - Shelf pitch: 5 cm - Shelf item no.: ZB361315 - Uprights: approx. 249 × 60 cm, galvanized, pre-assembled - Storage levels: 6 - Condition: Used, SSI Schäfer R3000 SCOPE OF DELIVERY: - 11 x uprights (approx. 249 × 60 cm), pre-assembled - 60 x shelves (approx. 128 × 60 cm) - 03 x cross braces Price: €764.00 net €909.16 gross Invoice with VAT shown. DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery across Germany via partner carriers—freight costs vary by postal code - Professional assembly and dismantling by trained teams optionally available - Shelf inspection in accordance with DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racking from other manufacturers also available PLANNING & CONSULTATION: Our planning department will gladly provide you with a non-binding quotation—individually tailored to your requirements. Whether new installations, modifications, or extensions—we offer expert advice for your racking configuration. SHOWROOM: Feel free to visit our showroom! On site, you can get a comprehensive overview of our pallet racks, warehouse racks, and other solutions. Many systems are assembled and available for direct viewing. Our experts are happy to assist with any questions or provide individual consultation—we look forward to your visit! Haven't found the right solution yet? Visit our website for a quick overview of many offers and variations for these and other products! INTERESTED OR HAVE QUESTIONS? Simply contact us by message or phone. Our phone number can be found on our company page. ☎️ We are available by phone Monday to Friday, 8:00 am – 4:00 pm. Alternatively, send us a message with your name and number, and we will get back to you as soon as possible.

Condition: good (used), Technical specifications for the pallet rack upright: Shelving system: Jung Heinrich Type: Esmena Included in delivery: Pallet rack upright, used Material color: RAL 5019 blue Frame profile: MX630 Profile dimensions: 100 x 81.3 x 1.8 mm System perforation: 50/50 mm Incl. cross and diagonal braces, Foot plates The uprights are pre-assembled (screwed framework) Height: 9,000 mm Depth: 1,100 mm Your contact person in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: Crjdpowbf Amefx Addjk This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Combo - contour cutter//cutting line: TECNODINAMICA mod. KAOBAND -Cutting line for blocks of size 4800x1200x1200 (finished block size) - Tipper - Guillotine for sectioning up to 2400 mm for the pantograph - Automatic rotation of the cut block for contour cutter/pantograph - Horizontal cutting with automatic wire positioning - Pantograph integrated in the first station with automatic wire positioning. - Automatic lower scrap miling Cedpfx Ajuct Szoddjrk - Side cutting with manual wire positioning - Down cutter with manual wire positioning - Safety fences with micro switchs - PLC with INPUT/OUTPUT cards connected to the PC - Machine in excellent condition - Total length approximately 37m

Condition: used, Year of construction: 2008, operating hours: 7,690 h, Serial number: 5xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21905 Specifications: Model year: 2008 Hours: approx. 7,690 Cjdpfxoxzyhho Addjrk 71 kW 14,800 kg Undercarriage (see photos) Gjerstad S60 quick coupler Engcon rotor tilt Digging bucket Grading bucket Track width: approx. 60 cm Machine width: approx. 260 cm Blade Central lubrication Extra work lights Radio/CD Air conditioning Description:Doosan DX140LC tracked excavator with approx. 7,690 hours.Comes with Engcon tilt, digging bucket, and grading bucket.One track has been replaced and the other will be replaced before sale.Can be delivered at short notice. Hours: 7690 Own weight: 14800 Width: 260 Kw: 71 Model: DX140LC Beltegraver m/ Engcon tilt og 2 skuffer. Nye belter.

Condition: excellent (used), Technical data for the shelving system: Shelving system: Dexion Type: HI280 Technical data for installation: Number of shelf rows: 01 pcs. Shelf length: 820 mm Number of bays per shelf row: 01 pcs. Number of shelves: 05 pcs. The scope of delivery includes: 02x shelf uprights, new II. Choice Material color: sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustment grid: 25 mm Incl. bulkhead bar and base plates The uprights are pre-assembled 2,100 mm high 400 mm deep 05x shelves, used Material color: sendzimir galvanized Dimensions: 750 x 375 x 30 mm 05x Shelf traverse, second-hand Material color: sendzimir galvanized Clear width: approx. 750 mm Z-profile: 50 x 25 mm Number of hooks: 02 pcs. 04x compensation plates, new Type: HI280 U-PL. STD 42X50X1.2 VZ Material color: sendzimir galvanized Credpfxetrwa Nj Addok 01x Load plate with details of bay and compartment loads, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: used, Year of construction: 2001, operating hours: 8,670 h, Serial number: DCH21Bxxxx Please contact ATS Norway for more information Please provide reference number upon request: 21904 Specifications: Certified until 09/2026 Model year: 2001 Hours: approx. 8,670 105 kW Weight: approx. 20,900 kg New complete undercarriage, approx. 150 hours of use Grading bucket Hydraulic grading bucket Klepp S70 quick coupler Track width: approx. 70 cm Machine width: approx. 310 cm New LED lights Radio/CD Credpfexzyg Rjx Addsk Climate control/AC Description:Well-maintained Case CX210 tracked excavator for sale with hydraulic grading bucket.Comes with a completely new undercarriage including new idlers, approx. 150 hours since replacement.Delivered originally with rotation hydraulics, 2 pedals and 5 hoses on the stick.Both lift cylinders have been resealed.Recently received a major service with all filters and oils replaced.A lightly used toothed bucket can be included for an additional cost.The machine is certified and ready for operation.Can be delivered on short notice.See video. Hours: 8670 Own weight: 20900 Width: 310 Kw: 105 Model: CX210 Beltegraver m/ tilt og pusseskuffe. SE VIDEO

Condition: good (used), Technical data for the shelving unit: Shelving system: Dexion Type: HI280 Technical data for installation: Number of shelving rows: 01 pc. Shelf length: 1,330 mm Number of bays per shelving row: 01 pc. Number of shelves (plus ground level): 07 pcs. Scope of delivery: 02x shelf uprights, used Material color: sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustment pitch: 25 mm incl. side panels Uprights are preassembled 3,200 mm high Crjdpfowtdyzex Addek 610 mm deep 07x shelves, used Material color: sendzimir galvanized Dimensions: 1,275 x 575 x 30 mm Weight / unit: approx. 4.37 kg Max. load per shelf with evenly distributed load: 100 kg 07x shelf crossbeams, used Total length: 1,275 mm Z-profile: 50 x 25 mm Number of hooks: 02 pcs. Weight / unit: approx. 0.84 kg Material color: sendzimir galvanized 04x leveling plates, new Type: HI280 U-PL. STD 42X50X1.2 VZ Material color: sendzimir galvanized 01x load sign with information on bay and shelf load, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. If you wish to have it transported or shipped, additional costs will apply. These can be quoted separately depending on the place of delivery and scope of delivery.

Condition: used, Year of construction: 2018, operating hours: 4,700 h, Please contact ATS Norway for more information Please provide reference number upon request: 21745 Specifications: Model year: 2018 Hours: approx. 4700 Weight: 5808 kg Power: 36.5 kW Undercarriage (see photos) Rubber tracks Cedpfx Aexvlgfsddjrk Track width: approx. 40 cm Machine width: approx. 200 cm S50 quick coupler Engcon tilt rotator (from 2018) Digging bucket Grading blade Central lubrication Extra lights Radio/CD Air conditioning Description:Volvo ECR58D tracked excavator from 2018 in good condition.Comes with Engcon tilt rotator and digging bucket.Additional buckets available at extra cost.Can be delivered on short notice. Hours: 4700 Own weight: 5808 Width: 200 Kw: 36,5 Model: ECR58D Beltegraver m/ tilt og skuffe

Condition: good (used), Technical specifications for the shelf connector: Shelf system: Polypal Included in delivery: 1x shelf connector, used for shelf spacing: 200 mm Total length: approx. 260 mm U-profile dimensions: approx. 50 x 15 mm Material color: Sendzimir galvanized Drill hole diameter: 11 mm Weight: 0.250 kg | each includes: 2x screws M10 x 35 mm 2x nuts M10 2x washers M20 Your contact person in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch Crodswhkbzspfx Addsk General information about the item: This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, Year of construction: 2016, operating hours: 11,000 h, Serial number: HCMDDN50J0006xxxx Please contact ATS Norway for more information Please provide reference number upon request: 19936 Specifications: Cjdpfxov U R U Aj Addsrk Certified until: October 2025 Model year: 2016 Operating hours: Approximately 12,100 hours Power: 197 kW Weight: 31,600 kg Chassis: See pictures New chains Leica GPS Engcon Tiltrotator S70 quick release Sanding bucket Excavator bucket Webasto Central lubrication Additional work light Rotor beam LED bar Rear camera Radio/CD Air conditioning/AC Description: Hitachi ZX300 crawler excavator from 2016. This excavator is equipped with Leica GPS, two buckets, and Engcon tilt, as well as new chains. It is certified and ready for immediate operation. The machine can be delivered at short notice. Hours: 11000 Own weight: 31600 Total Weight: 31600 Kw: 197 Model: ZX300LC-6 Beltegraver m/ 2 skuffer, tilt og GPS

Condition: good (used), Technical data for the deep bar: Manufacturer: SSI Schäfer Crodjnl Dmkspfx Addjk Included in delivery: 01x depth bar, used Material color: grey total length: approx. 1.108 mm f. depth of upright: approx. 1.100 mm clear span: approx. 999 mm crossbeam support: approx. 55 mm profile dim.: CS 190 x 75 x 13 mm material thickness: approx. 2,00 mm weight / pcs.: approx. 8,020 kg Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: used, Year of construction: 2019, operating hours: 4,820 h, Serial number: LA0801xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21656 Specifications: Delivered with new certification Model year: 2019 Hours: approx. 4,820 (increasing) Power: 124 kW Operating weight: 26,000 kg Undercarriage (see photos) X-site GPS Grading bucket S70 quick coupler Engcon tiltrotator (from 2020) Track width: approx. 60 cm Machine width: approx. 300 cm Rear and right-side cameras Crsdpfxjxq Drie Addek Extra work lights Rotating beacon Radio/CD Climate control / AC Description:Kobelco SK230 tracked excavator from 2019.Comes with grading bucket, Engcon tiltrotator, and X-site GPS.Delivered with new certification.Serviced at 4,500 hours.Delivery by agreement. Hours: 4820 Own weight: 26000 Width: 300 Kw: 124 Model: SK230SRLC-5 Beltegraver m/ Tilt, Skuffe og GPS

Condition: used, Year of construction: 2018, operating hours: 4,650 h, Serial number: 17850xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21201 Specifications:• 2018 model• Hours: approx. 4650• Weight: 8500 kg• 51.6 kW• Undercarriage (see pictures)• Track width: 45 cm• Total width: 230 cm• Blade• Hammer hydraulics• S50 quick coupler• Central grease• Rototilt• Digging bucket• Grading bucket• Extra lights• Radio/CD• A/C• Recent 500-hour service• Ready for delivery Codpfx Aow Srmlsddork Notes:• Needs a new battery Description:Takeuchi TB280 tracked excavator from 2018.The machine is sold with tilt and 2 buckets. Recently had a 500-hour service.Ready for delivery. Hours: 4650 Own weight: 8500 Width: 230 Kw: 51,6 Model: TB280FR

Condition: used, Year of construction: 2000, operating hours: 11,330 h, Serial number: YF01-xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20645 Specifications: 2000 model Hours: Approximately 11,330 Weight: 23,200 kg 107 kW Chassis (see pictures) Crodpfx Aswp Egbsddek Belt width: 60 cm Total width: Approx. 300 cm S70 quick release Hammer hydraulics Central grease Steelwrist Rototilt Sanding bucket Rotor lamp Air conditioning/AC Videos Ready for delivery Description:Kobelco SK235 from 2000.The machine is sold with a rototilt and sanding bucket.Ready for delivery. Hours: 11330 Own weight: 23200 Total Weight: 23200 Width: 300 Kw: 107 Model: SK235SR

Condition: used, Year of construction: 2013, operating hours: 11,000 h, Serial number: HCMDCK50H0030xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21370 Specifications: Certified until 12/2025 2013 model Approx. 11,000 hours 122 kW Operating weight: 22,300 kg Crodpoxm Tc Asfx Addek Undercarriage (see pictures) Novatron GPS Engcon tiltrotator Grading bucket S70 quick coupler Central lubrication Track width: approx. 60 cm Machine width: approx. 300 cm Extra work lights Rearview camera Air conditioning Radio/CD Description:Hitachi ZX210 crawler excavator from 2013.Delivered with grading bucket, tiltrotator, and Novatron GPS.Certified until 12/2025 and ready for immediate operation.Quick delivery available. Hours: 11000 Own weight: 22300 Width: 300 Kw: 122 Model: ZX210LC-5B Beltegraver m/ tilt, skuffe og GPS.

Condition: used, Year of construction: 2013, operating hours: 3,475 h, Serial number: 5xxxx Please contact ATS Norway for more information Codpoxg Aclefx Addsrk Please provide reference number upon request: 21450 Specifications: 2013 model Hours: approx. 3,475 Power: 33.8 kW Weight: 5,257 kg Undercarriage (see pictures) Rubber tracks S40 quick coupler Machine width: approx. 200 cm Track width: approx. 40 cm Engcon tiltrotator Grading bucket Extra work lights Rotating beacon Dozer blade Radio/CD Air conditioning Description:Kubota KX57 tracked excavator from 2013.Delivered with grading bucket and Engcon tiltrotator.The machine has only 3,475 hours and no known issues.Available for prompt delivery. Hours: 3475 Own weight: 5257 Width: 200 Kw: 33.8 Model: KX 057-4