Used Rack Milling Machine for sale (67,951)

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Fgedpfx Ajxxb Rrop Deh Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Fsdjx D Tbmopfx Ap Dogh Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 1976, functionality: fully functional, machine/vehicle number: ZFM300H 76 2301, RACK MILLING MACHINE Fgedpfx Apjykpl No Djh

Condition: used, Year of construction: 2010, working width: 230 mm, spindle diameter: 40 mm, working height: 120 mm, controller model: Siemens Simatic Touch-Panel, working length: 8,483 mm, TECHNICAL DETAILS Minimum working height: 6 mm Maximum working height: 120 mm Fgsdjz Ekkxspfx Ap Dsh Minimum working length: 370 mm Maximum working length: 8,483 mm Minimum working width: 25 mm Maximum working width: 230 mm Maximum feed rate: 12 m/min Rubber feed rollers: 1 Toothed feed rollers: 4 Total number of feed rollers: 5 Number of machining units: 4 Lower milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 4 kW Right milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Maximum tool diameter: 4 mm Motor power: 4 kW Left milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 4 kW Upper milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 5.5 kW MACHINE DETAILS Control system: Siemens Simatic Touch Panel Total connected power: 24 kW EQUIPMENT CE-compliant safety design The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7243

Condition: used, Year of construction: 1990, hobbing length 2100 mm milling width 300 mm max. module 16/18 min. module Fjdpfx Apst Hwwqs Degh total power requirement 10 kW weight of the machine ca. 5 t dimensions of the machine ca. m

Condition: used, Year of construction: 1980, hobbing length 1750 mm milling width 260 mm max. module 10 min. module 12 total power requirement 8 kW weight of the machine ca. 4500 kg dimensions of the machine ca. m D O N A U - K N A P P (Germany) Fgodpfx Aot Hxagsp Deh Universal Automatic Rack Milling Machine Model UZFM – V 300 H Year approx. 1980 Serial No. 80-234x Max. length of rack 1,750 mm Milling travel / milling width cross max. 260 mm Module, steel / cast iron 10 / 12 Table clamping size 275 x 1,850 mm Mounting height below cutter, depending on cutter Ø 136 – 410 mm Cutter Ø, min./max Ø 125 + 2 x cutting depth / Ø 160 mm Cutter width max. floating / with support 50 / 140 mm Cutter mandrel Ø max. 50 mm Milling spindle head, swivelling right / left 30 / 45 ° 9 spindle speeds 22 – 179 rpm Milling slide swivelling right / left 30 ° Feeds, infinitely variable (milling slide) 0 – 600 mm/min Quick return 2,000 mm/min Milling spindle drive approx. 4 kW Total electrical load 8 kW - 400 V - 50 Hz Weight 4,500 kg Accessories / Special Features: * Automatic milling cycle control via cam bloc mounted on milling slide and table slide with possibility of jump switching (= automatic by-pass of an area which should not be milled) and pendulum milling operation (= synchronized milling on the first half of table, and workpiece change on the second half. * hydraulic workpiece clamping device: 1.800 x 260 mm each, clamping width 140 mm, clamping height inside the device 60 mm, with own hydraulic aggregate, hand switch, * Manual fine adjustment of table (0.001 mm) for exact positioning in a pre-milled rackgear. * Various change gears (approx. 10 pieces). * 2 cutter mandrels. * Various other accessories. * Central lubrication. * Built-in hydraulic unit. * Simple Coolant device. Separate switch cabinet, various rack cutter up to 160 dia. This machine is especially suitable for milling racks, and also for manufacturing broaching tools (relief milling is possible by swivelling the cutter head). Condition : Very good. Machine can be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract

Condition: excellent (used), XYZ SMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Year of Manufacture 2008 Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar For sale with Jet Machinery Ltd Jet Machinery Stock No: #79245 Machine Serial Number: 10731 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Fsdpfx Apezuxn To Dsgh Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 1,10,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Fgsdpfx Ajyahv Sop Deh Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.

Year of construction: 2001, condition: excellent (used), JAROMA DFOA II MILLING MACHINES Producer JAROMA Machine model / type DFOA II Year of production 2001 Category of machines. MILLING MACHINES Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Fgedpfxeh S Uhfj Ap Deh Customer cover Startup type to be agreed Description Remarks JAROMA DFOA edge milling machine In stock - Polish production - Year of production 2001 - unpainted The DFOA-II milling machine is designed to mill the excess veneer to the thickness of the rectilinear or curvilinear element. The veneered side must be perpendicular to the surface, it can also be at an angle of 0-45o or rounded with a radius of R 15-20.

Condition: excellent (used), For sale: MC9050B industrial round wood rod milling machine, manufactured in 2018, designed for producing round wooden poles and cylindrical wooden components such as tool handles, broom handles, furniture parts, and similar products. Specifications: • Model: MC9050B • Year of manufacture: 2018 • Power supply: 380V (Three-phase) • Working diameter: 15–50 mm • Minimum workpiece length: 600 mm • Main motor: 3 kW • Approximate weight: 350 kg Condition: • Excellent working condition. • Complete machine, ready for immediate use. • Inspection and testing are welcome. Fgedpfxszmt U Eo Ap Doh

Condition: ready for operation (used), Year of construction: 2013, operating hours: 12,486 h, functionality: fully functional, travel distance X-axis: 3,400 mm, travel distance Y-axis: 2,300 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 18,000 rpm, controller model: Siemens 840D sl, TECHNICAL DETAILS Travel range X-axis: 3,400 mm Travel range Y-axis: 2,300 mm Travel range Z-axis: 1,000 mm Rapid traverse X-axis: 60 m/min Rapid traverse Y-axis: 60 m/min Rapid traverse Z-axis: 40 m/min Fedoz Izduopfx Ap Degh Design: C3 swivel head Swivel range C-axis: 200° Swivel range A-axis: 120° Spindle motor power: 24 kW Spindle mounting: HSK 63 A Spindle speed: 18,000 rpm Spindle cooling: Water cooling Design: Disc tool changer Tool magazine positions: 20 Pick-up positions: 1 Tool diameter: up to Ø 500 mm Table length: 2,000 mm Table width: 1,500 mm Table thickness: 30 mm Grid spacing: 100 x 100 mm Maximum load capacity: 2,000 kg Repeatability: approx. 0.012 mm MACHINE DETAILS CNC control: Siemens 840D sl Spindle operating time: approx. 12,486 hours Power-on hours: approx. 37,297 hours EQUIPMENT 5-axis package: included Advanced Surface: included TCP: included Control panel size: 15 inches Remote maintenance: prepared Workpiece measuring probe: m&h wireless measuring probe Tool measurement: BLUM laser Minimum quantity lubrication: internal and external lubrication Central lubrication: automatic Spray mist extraction: with electrostatic separation Full protective cabin: included Tool changing chamber: separate Technical documentation Operating manual Omlat spare spindle included

Condition: used, Year of construction: 1971, hobbing length 1750 mm milling width 260 mm max. module 10 table size incl. water gutter 460 x 2100 mm table clamping surface: 250 x 1850 mm cutter width - max. 100 mm feed of the milling slide, stepless 0 - 500 mm/min. rapid traverse feeds 3000 mm/min milling head -swivable +/- 30 ° Rotation speed range of milling head, in 9 steps 29 - 178 rpm Milling head swivable 2 sides helical gearcutting 30 ° total power requirement 4 kW weight of the machine ca. 4 t dimensions of the machine ca. 4 x 1,85 x 1,85 m Milling length 1750 mm Milling width 260 mm Module - max. 10 Table dimensions incl. water channel 460 x 2100 mm Table clamping surface: 250 x 1850 mm Milling cutter width - max. 100 mm Feed of the milling carriage, infinitely variable 0 - 500 mm/min. Rapid traverse 3000 mm/min Milling head - tiltable + / - 30 ° Speed range of the milling spindle, in 9 steps 29 - 178 rpm Fgjdpfx Apoy Ayrre Deh Milling head swivels on both sides for helical gearing 30 ° Machine weight approx. 4 t Space requirement approx. 4 x 1.85 x 1.85 m Equipment/accessories - 7 vices - change wheels - Clamping devices - documentation

Condition: used, Year of construction: 1971, hobbing length 1750 mm milling width 260 mm max. module 10 mm table size incl. water gutter 460 x 2100 mm table clamping surface: 250 x 1850 mm cutter width - max. 100 mm feed of the milling slide, stepless 0 - 500 mm/min. rapid traverse feeds 3000 mm/min Fgjdjylpzyepfx Ap Doh milling head -swivable +/- 30 ° Rotation speed range of milling head, in 9 steps 29 - 178 rpm Milling head swivable 2 sides helical gearcutting 30 ° weight of the machine ca. 4 t dimensions of the machine ca. 4 x 1,85 x 1,85 m Equipment/accessories - 7 vices - change wheels - Clamping devices - Documentation

Condition: excellent (used), Year of construction: 2010, XYZ SMX 5000 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Manufactured 2008 Table: 1930 x 355mm 4 off T Slots size 15.9mm Max load 850kgs Travel: X – 1524mm Y – 596mm Z – 584mm Dims: W - 5805mm Fjdpfsy Ni Ivsx Ap Degh D – 2530mm H – 3143mm Weight - 3100Kgs For sale with *Jet Machinery Ltd* Stock No: 79199 Serial No: 11273 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2010, Immediately available ex location: CNC bed milling machine Wagner Type WBE 1300 R Year of manufacture: 2010 Siemens Sinumerik 810 D Table 1500 x 400 mm Travel X/Y/Z: 1300/500/570 mm SK 40 Automatic tool clamping Drive power 12/9 kW Spindle speeds 60 – 8,000 rpm Electronic handwheel Ball screw Vice Various tool holders Fgedpfx Apoz Ixlve Doh Weight 4 t Price: EUR 5,500 plus VAT ex location

Condition: ready for operation (used), Year of construction: 2003, CNC Milling Machine OPS Fgedpoz Ixkfsfx Ap Djh Type OPS HSC 600 Year of manufacture 2003 CNC control system Andronic 3D path control with Ethernet interface Travel distances X/Y/Z 625/375/350 mm Tool changer based on Erowa system, 40 positions Spindle speeds 5000 – 40,000 rpm Fixed table, load capacity up to 600 kg Travel speed up to 20 m/min Repeatability 0.002 mm Tool changer, 32 positions Spindle HSK 32 E Drive power 9 kW Weight 3500 kg Price: Euro 3,750.00 (plus VAT), ex works

Condition: as good as new (ex-display), functionality: fully functional, power: 7.35 kW (9.99 HP), input voltage: 400 V, input frequency: 50 Hz, spindle diameter: 30 mm, pivoting range: 46 °, rotational speed (max.): 18,000 rpm, rotational speed (min.): 1,000 rpm, The new profil 92 M e-motion spindle moulder is Format4’s premium model, offering maximum operating comfort and ensuring absolute efficiency through minimal setup times during milling operations. The advanced electric spindle features an HSK 63F interface for a tool quick-change system with pneumatic clamping. The swiveling range of ±46° enables limitless machining versatility. With the self-explanatory e-motion control via a 15-inch touchscreen panel, spindle speed, spindle height and angle, as well as the fence position and even the table opening, can be set intuitively and precisely. Integrated memory for tools, spindle settings, and milling programs ensures perfect repeat accuracy and the shortest setup times. Electrically controlled, eccentric inserts provide maximum table support area and significantly reduce adjustment work, especially when swiveling the spindle. The newly developed heavy-duty precision milling fence features two powered axes for precise depth adjustment of the complete fence, plus an independent, adjustable depth stop for the right-hand feeding jaw. For convenient access during curve milling, the fence can be swung completely out of the working area. Optionally, the Format4 profil 92 M e-motion can be equipped with an electrically height-adjustable power feeder. Further technical data: - Maximum tool diameter: 250 mm - Usable spindle height: 140 mm - Height adjustment: electric Optional equipment: 12 Potential-free contact 106 HSK 63F spindle, Ø 30 mm, 140 mm 118 Integral safety rulers, 650 mm 119 Table opening 255 mm with controlled eccentric inserts 183 Table extension on both sides 670 mm with 2200 mm sliding frame 213 Electrically height-adjustable feeder support, incl. horizontal tube 220 Parts list holder with A9 clipboard Advantages: - Highly efficient electric spindle with stepless speed adjustment and HSK 63F interface Fjdpfx Apowztr Ns Degh - Position control for milling height and angle ±46º - Position control for milling fence including offset function - Smartouch with intuitive e-motion control system - Table opening with controlled eccentric inserts (optional) - Electrically adjustable height for the feeder on overhead column (optional) Further information: - The electric spindle features a HSK F63 tool quick-change system - Clamping range: 2–25 mm with OZ25 collets - "Integral" safety rulers: 650 mm - Table extension on both sides 670 mm with 2200 mm sliding frame - Table opening 255 mm with controlled, eccentric inserts

Condition: good (used), Year of construction: 1981, Table size 1300 x 400 mm Tool holder DIN 2080 ISO 40 Travel ranges X-axis, automatic/manual 1000 / 1020 mm Y-axis, automatic/manual 350 / 370 mm Z-axis, automatic/manual 430 / 450 mm Speed range, 2 steps 32 – 1400 rpm Quill in vertical milling head yes Milling head, swiveling ± 90° Fedpfjd D Tf Hsx Ap Dogh Feed range X/Y-axis, stepless 10 – 1000 mm/min Feed range Z-axis, stepless 4 – 400 mm/min Rapid traverse X/Y-axis 5 m/min Rapid traverse Z-axis 1.8 m/min Drive power, vertical + horizontal 3.2/4 kW Space requirement L x W x H 3200 x 2700 x 2200 mm Weight 2400 kg Accessories / Special features: • NC point-to-point control HEIDENHAIN TNC 131 S • RS 232 interface • Stepless feed • Automatic and/or manual operation possible • Safety devices / prompts to secure the hand crank when the X-Y and Z axes are moved manually, as well as the manual tool clamping • Vertical and horizontal milling spindle • Quill in vertical milling head • Hydraulic axis clamping • Central lubrication • Coolant system Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Year of construction: 2020, condition: ready for operation (used), - USED - TRAVELLING COLUMN MILLING MACHINE LONGITUDINAL TRAVEL: 12000 mm TRANSVERSAL TRAVEL: 1600 mm VERTICAL TRAVEL: 3600 mm RAPID FEEDS L-T-V: 30 m/min TABLE SIZE: 13000 x 2500 x 300 mm SPINDLE: 450 - 5000 rpm; 34 kW; 830 Nm; ISO 50 HEAD: UNIVERSAL AUTOMATIC A/B AXIS ; MILLESIMAL POSITIONING TOOL MAGAZINE: CHAIN-TYPE ; 100 POS CONTROL UNIT: HEIDENHAIN TNC 640 HIGH PRESSURE COOLANT: 40 Bar WEIGHT: 87480 Kg ACCESSORIES: SWARF CONVEYOR ; PAPER FILTER ; LASER TOOL SETTER ; Fgodpfxezbnr Ae Ap Deh TOUCH PROBE ; PORTABLE HANDWHEEL NOTE: ROTARY TABLE 1500X1500, 1,5 rpm, MAX ADMITTED LOAD 15.000 Kg; HEAD LOADING/UNLOADING DOUBLE CRADLE; MOBILE WORKING PLATFORM; PERIMETER FENCES; STATIC RTCP OF ROTATING TABLES; STATIC RTCP IN THE SPACE ; AUTOCAL; VIBRATION DETECTION PROBE; COOLING TANK 1500L; GREEN MODE FUNCTION

Condition: excellent (used), Year of construction: 2008, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 30762, spindle speed (max.): 3,000 rpm, type of input current: three-phase, total length: 10,000 mm, total height: 2,000 mm, total width: 5,000 mm, table length: 3,100 mm, drilling capacity: 40 mm, drilling depth: 130 mm, workpiece weight (max.): 7,500 kg, Manufacturer: Ficep Year of manufacture: 2008 Serial number: 30762 Technical specifications: Maximum workpiece width: 3,100 mm Minimum workpiece width: 400 mm Minimum workpiece length: 1,900 mm Fgodjz Inhgjpfx Ap Djh Maximum workpiece length: 6.4 m Maximum material thickness: 130 mm Maximum drilling diameter: Ø40 mm Maximum workpiece weight: 7,500 kg Plasma source: Hypertherm HPR260 Spindle speed: 180–3,000 RPM Minimum workpiece size: 200 × 150 mm Equipment: Complete line with motorized roller conveyors for feeding and removing material Approximate feeding conveyor length: 8 m Approximate removal conveyor length: 5 m Includes a wide conveyor for removing metal scrap.

Condition: ready for operation (used), Year of construction: 1995, Available immediately ex-yard: CNC tool milling machine, Deckel Type FP 5 – 80 Year of manufacture 1995 CNC control: Dialog 12 Universal table: 750 x 520 mm Travel distances X / Y / Z: 800 / 550 / 500 mm Drive power: 9 kW Spindle quill stroke: 80 mm Electronic handwheel Spindle speeds: 32 – 5000 rpm Feed rates: 0 – 6000 mm/min Fsdjz Ixi Uepfx Ap Dogh Weight: 4.5 tons Price: Euro 2,500.00 (plus VAT), ex-yard.

Condition: like new (used), Year of construction: 2018, operating hours: 500 h, functionality: fully functional, LAGUN BM4RT Bed Milling Machine Manufacturer: Lagun Type: BM4RT Year of manufacture: 2018 Fgedpozmpydjfx Ap Deh Condition: operational, used, like new Operating hours: 1650 h Spindle hours: 438 h Control system: Heidenhain iTNC 640 Video available. Further information upon request.

Condition: used, Year of construction: 1987, Universal CNC Milling Machine CNC MAHO MH 400 E Travel X: 400 mm Travel Y: 375 mm Travel Z: 250 mm Numerical Command CNC PHILIPS 432 Table: 700 x 270 mm Cone: SA40 Fgedpfjz Nx Hwox Ap Deh Spindle speed: from 80 to 4000 RPM Year of construction: 1987 Central lubrication Manually swivel head Supplied with doc + machine parameters Voltage: 380 V Width: 2200 mm Depth: 2000 mm Total height: 2000 mm Weight: approx 1,5 T

Condition: ready for operation (used), Universal milling machine / DECKEL FP 33 including Heidenhain digital display & accessories - COMPLETE TECHNICAL DATA – SEE PHOTO - Heidenhain digital display Fsdpjz N S U Usfx Ap Dsgh - Various accessories - Documentation - Crane Dimensions: L x W x H 2.5 x 2 x 2 meters / Weight 5000 kg Errors and omissions excepted.

Condition: like new (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 7,000 mm, travel distance Y-axis: 1,210 mm, travel distance Z-axis: 1,850 mm, Manufacturer: FPT Year: 2007 CNC Control: HEIDENHAIN Axis Travels X-axis: 7,000 mm Y-axis: 1,210 mm Z-axis: 1,850 mm Milling Head / Rotary Axes A-axis: 270° B-axis: -180° / +180° C-axis: 360° The machine is currently installed at our factory in Istanbul, Türkiye and is in working condition. Fgedpfx Aezznupop Doh The machine can be inspected under power at our facility. Further technical information, photos and videos can be provided upon request.