Used Radial Drill for sale (5,389)

Condition: good (used), Year of construction: 1997, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Ljdpormkfnefx Aqvohg Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides legible from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining cycles Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: refurbished (used), Year of construction: 1997, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design • Work table 1800 x 600 mm with 4T-slots • Boom travel 1050 mm • Drill spindle SK 40 with tool clamping device • Stepless speed programming • Stepless spindle feed via three-phase servo motor • 2 T-slots 18 mm on the machine base frame at the back • 2 T-slots 18 mm on the machine base frame on the left • Thread cutting device • Central lubrication • Coolant device • Machine light • CE marking • Safety device • USB interface Dimensions and travel paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Spindle stroke (Z axis) mm 200 Column stroke (W axis) mm 410 Distance from lower edge of spindle - min mm 70 Top edge of table max. mm 680 Distance from bottom edge of spindle - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Work table height mm 900 Cutting values Drilling performance into solid material St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 – 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feeds continuously variable mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen backlit, easy to read from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental dimensions, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Sub-program technology: yes Machining cycles Standard software options: programming in dialog, 38 zero point shifts, turning and mirroring, teach-in for X, Y, Z, restart in the program with optional functions for targeted entry Zero point determination: cycles for determining zero points by manually Lhedovv Spkjpfx Aqvsg probing the workpiece for: - any rectangular parts clamped - any round parts clamped - transfer of cast and burnt parts - angular position detection for round parts by probing reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: used, Year of construction: 1979, arm length 1600 mm Lsdeyigbcepfx Aqvehg taper MK 5 weight of the machine ca. 3 t

Condition: new, Year of construction: 2026, An industrial radial drilling machine featuring simple and rigid construction, providing a broad range of machining, such as: drilling, reaming, deepening, boring and tapping. Machine features - Drilling machine intended for drilling, tapping and reaming - Limited vibration due to a dedicated design of the machine – additional ribbing along with strengthened cast iron - Oiled gearbox, containing ground and hardened gears made of high-quality steel alloy - High weight and sturdy construction of the machine provide stability and vibration-free operation - Cube table guarantees easy workpiece fixture - Sturdy, ground column of large diameter - Ground lower plate, intended for machining larger elements - Arm height adjustment through a motor - Control panel located at the front of the drilling machine for improved convenience - Mechanical arm and head clamping - Boom arm height easily adjustable through raising motor - Hydraulically operated feed and spindle drive - Ground column surface allows for simple and accurate arm travel - Ground and hardened boom guide - Drilling machine equipped with manual head and column arm limiter - Large speed range offers precise and quick machining Technical data Maximum drilling diameter - 50 mm Axis distance from spindle to column - 350–1600 mm Axis distance from spindle to table surface - 320–1220 mm Spindle extension - 390 mm Headstock horizontal movement - 1250 mm Boom vertical movement - 590 mm Spindle taper - MK5 Lsdpsg Rcd Uefx Aqvehg Spindle speed (16 gears) - 25–2000 rpm Feed range - (16) 0.04–3.2 mm/turn Main motor power - 4.0/5.5 kW Raising motor power - 1.5 kW Machine dimensions - 2500×1070×2840 mm Weight - 3500 kg The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, A large and stable radial drilling machine with a large range of revolutions which ensures precise and fast machining. Machine features Large weight and sturdy design ensure stability and vibration-free operation Cube table provides adjustability and easy fixture of workpiece Control panel located at the front of the machine for improved convenience Ground column surface provides easy, precise arm travel Machine equipped with manual head and column arm limiter Large speed range for accurate and quick machining Technical data Maximum drilling diameter 32 mm Lodpei D Daqofx Aqvohg Distance from spindle to base 340–1125 mm Distance from spindle axis to column surface 330–890 mm Spindle extension 215 mm Spindle taper MK4 Spindle speed 75–1200 rpm Spindle speed ranges (6): 75, 130, 240, 380, 660, 1200 rpm Spindle feed (3) 0.10; 0.16; 0.25mm/turn Horizontal plane rotation angle 180° Main motor power 2.2 kW Worktable dimensions 500×330×294 mm Machine dimensions 1400×660×2100 mm Weight 950 kg The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: used, Year of construction: 1978, machine/vehicle number: 78004, type of input current: three-phase, We are offering this used Csepel 12UH/1600 radial drilling machine, year of manufacture 1978. Lhedpfsyh Uaqjx Aqvsg Model: 12UH/1600 Serial number: 78004 Power type: 3~ Wiring diagram no.: 358000 If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2012, bore capacity in steel (diameter) 62 mm Lhjdpsyhq T Nsfx Aqvog arm length 350-1600 mm workpiece height max. 1250 mm distance spindle nose and table 350-1250 mm Boring depth max. 315 mm machine table 2400 x 1000 x 200 mm Turning speeds of the bor. spindle 38 - 2000 U / min spindle taper MT5 feed 0,06 - 1,00 mm/U engine output 4 kW stroke drive 1,5 kW oil pump 0,75 kW total power requirement 6 kW weight of the machine ca. 3,8 t dimensions of the machine ca. 2490 x 1050 x 2780 mm Steps of spindle speed: step-less Steps of spindle feed: 8 Speed of the arm up and down: 1.2 m/min Arm moving angle: ±180 degree Spindle moving distance of each dial revolution: 122 mm Max. spindle torque: 400 Nm Max. spindle feed resistance: 16000 N

Condition: used, The KNUTH KSR 50 VT is a high-performance radial drilling machine that belongs to the Radial Drilling Machines category. Designed with "Tool to the workpiece" in mind, this machine offers exceptional flexibility with clamping surfaces on three sides to accommodate various applications. Built from thick-walled high-grade cast iron, the KSR 50 VT features a robust structure, ensuring durability and precision during operation. The electronically controlled servo quill feed and large touchscreen display enhance user experience, allowing for seamless adjustments of machining parameters. Ideal for single and small series production, it shines in maintenance activities and tool as well as steel construction. With a drilling capacity of 50 mm and a table setup area of 1,200 x 505 mm, the KSR 50 VT is versatile enough for diverse tasks. Buy now to elevate your drilling capabilities with this advanced radial drilling machine. Ledjyfl Uvopfx Aqvjhg

Condition: good (used), Manufacturer : MAS Type : VR 4 throat : 1000mm Ledpfxjh Eigbe Aqvjhg without table!

Condition: good (used), Projection : 915mm Ljdped Ixy Ijfx Aqvjhg MK:3 Length : 1700mm Width : 1.000mm Height : 2000mm Weight: 1000 kg

Condition: excellent (used), Surface of the base plate 880 x 700 mm Distance from spindle center to stand min./max. 220 / 620 mm Drill spindle: Lhjdpfx Aeuigzpeqvsg 13 mm passage Inner cone MK 3 Stroke 150 mm Spindle speeds 25 - 2560 rpm. Spindle feeds 0.06 - 0.12 - 0.25 mm/rev Motor power (1500/3000 rpm) 1.2 / 1.5 HP

Condition: used, RADIAL CSEPEL TYPE: RF50/1600 Ljdpfsriu Eyex Aqvohg TYPE: RF50/1250 20 AVAILABLE PIECES

Condition: good (used), Year of construction: 1983, functionality: fully functional, Caser F50 radial drilling machine with quick-change chuck MK3. Lhedeyrytyopfx Aqvjg

Condition: refurbished (used), functionality: fully functional, table length: 1,200 mm, table width: 500 mm, spindle mount: MK 3, height adjustment type: electric, Donau DR23 Radial Drilling Machine – Robust Quality Machine Lodpfx Aqoyrtkxevshg For sale is a reliable Donau DR23 radial drilling machine, ideal for workshops, metalworking, or industrial applications. The machine impresses with its sturdy design, high precision, and versatile applications for drilling, countersinking, and thread cutting. Details: Manufacturer: Donau Model: DR23 Radial drilling machine overhauled by Vaumtec Quick-change chuck Stable cast construction Adjustable arm for flexible machining of large workpieces Suitable for steel, aluminum, and other metals Forward and reverse rotation

Condition: good (used), Table size: - horizontal: 500 x 600 mm - vertical: 310 x 600 mm Tiltable: 90° Dimensions LxWxH, approx.: 700 x 520 x 520 mm Weight, approx.: 280 kg Ljdpfx Aod Tticeqvshg Item no.: WW12214

Condition: repair required (used), STANKO 2 A 554 The machine is in perfect working condition except for the clamping of the boom lifting device and is currently still in operation. The clamping would have to be reassembled and readjusted, all parts are present. For safety reasons, the boom is secured with a tensioning strap, the clamp for the lift is in clamped condition. Technical data: - Drilling capacity 60 mm - Projection 1600 mm - Drill spindle holder MK 5 - Drill spindle stroke 390 mm - Spindle speed, 20 steps 20 - 2000 rpm - Clockwise and counter-clockwise rotation Lodpfx Aqstpu Tqevshg - Feed rate, 12 steps 0.056 - 2.5 mm/rev - Drive 400 V / 12.8 kW - Clamping of the arm and drilling unit electromechanical - Distance machined machine bed - drilling quill - min. approx. 900 mm - max. approx. 1600 mm - usable machine bed with 4 T-slots 950 x 1700 mm - Coolant device - Cube table - Space requirement approx. W 2600 x H 3000 x D 1000 mm - Weight approx. 4500 kg

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 (MK 4) • Infinitely variable speed control • Infinitely variable quill feed • Thread cutting attachment • Two 18 mm T-slots each on rear and left of machine base • 3-axis digital readout • Machine lamp • Central lubrication • Table top machined all around • Drill guard • Coolant system Dimensions and Travels Tool holder MK 4 Column diameter mm 195 Table size mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column travel mm 450 Distance spindle nose - table top min 40 mm, max 710 mm Distance spindle nose - base plate min 840 mm, max 1510 mm Drilling radius min 540 mm, max 1590 mm Work table height mm 900 Machining Capacities Drilling capacity (solid) St 60 ⌀ 45 mm GG 22 ⌀ 55 mm Tapping St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range min⁻¹ 15 – 2,800 Torque Nm max. 250 Constant from min⁻¹ 15 – 200 Feed Drives Feed, stepless mm/rev 0.02 – 0.7 Feed force N 12,000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Lhjdpfx Aqox Uwpxsvog Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with table 750 x 1200 mm kg 2,600 Documentation Operating manual, incl. Lubrication and hydraulic system diagram Electrical wiring diagram

Condition: as good as new (ex-display), Year of construction: 2024, Optimum OPTIdrill RD 6 Precise, solid radial drilling machines of top quality. Ideal for versatile use in single-part and series production. • Versatile application range, such as drilling, reaming, and threading • Electrically braked motor • 24V DC electrical system and 2-channel safety chain according to DIN EN 12717 • Heavy, solid, high-quality cast iron • Wide reach thanks to horizontally adjustable machine head • Clearly arranged control panel • Smooth-running swivel and travel axes • Elaborately machined column swivel with optimized clamping for maximum stability and minimal clamping offset • Robust, torsion-resistant boom construction • Boom height adjustment via powerful motor drive and lifting spindle • Drill head gear running in an oil bath • Boom guideways hardened and precision-ground • Chrome-nickel steel gears, hardened and precision-ground, ensuring quiet and smooth operation • Drill head and column can be clamped together or separately or loosened • Right-left rotation • Solid, precise drilling table, generously dimensioned • Hardened and ground clamping table with parallel T-slots • Machine light • Overload protection • Thick-walled cast iron column ensures smooth operation and stability • LED lamp • Coolant system with coolant tank in the machine base RD 6 / RD 7 • Column is hydraulically clamped Dimensions and Weights Column diameter 320 mm Length approx. 2670 mm Width/Depth approx. 1120 mm Height approx. 2760 mm Weight approx. 3200 kg Extension arm Rotation angle 180° Drilling capacity Drilling capacity steel (S235JR) 50 mm Continuous drilling capacity steel (S235JR) 45 mm Drilling table T-slot size 14 mm T-slots Number: 4 T-slot spacing: 180 mm Maximum distance between spindle and drilling table: 1420 mm Clamping table length: 630 mm Clamping table width: 500 mm Lsdpfswa Tc Sox Aqvshg Clamping table height: 500 mm Clamping table T-slot size: 22 mm Number of T-slots on the clamping table: 3 Clamping table T-slot spacing: 150 mm Min. distance between spindle and clamping table: 0 mm Max. distance between spindle and clamping table: 910 mm Min. distance between spindle and drilling table: 465 mm Speed range: Speed range: 44 – 1023 rpm Number of speed ranges: 12 Electrical data: Total power consumption: 6.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Machine base: Working surface length: 2550 mm Working surface width: 970 mm Motor(s) Spindle motor drive power: 4 kW Drive power Cantilever arm lifting motor 1.5 kW Coolant pump power of drive motor 90 W Hydraulic clamp drive 0.75 kW Spindle Quill stroke 270 mm Spindle mount MT5 Quill feed speed 0.06 – 0.2 mm/rev Quill feed speeds 3 Travel path Drill head travel (horizontal) 1250 mm Arm stroke (vertical) 680 mm Maximum spindle-column distance 1600 mm Minimum spindle-column distance 350 mm

Condition: used, Year of construction: 1972, bore capacity in steel (diameter) 50,0 mm arm length 1.350 mm workpiece height max. 1630 mm turning speeds 19 - 1320 U/min bore spindles - Morse Taper 5 MK engine output 5,5 kW weight 5 t range L-W-H 2,4 x 1,0 x 3,55 mm feed movement 475 mm Lhjdpfx Aowiikdoqvsg floor plate size: 1650x1000 mm feeds 0,07-2,9 mm/U

Condition: used, Year of construction: 1983, bore capacity in steel (diameter) 50 mm arm length 1250 mm workpiece height max. 1500 mm bore capacity in cast iron 60 mm threading . diameter of quill . mm spindle taper MT 5 turning speeds 28-2.500 U/min Max. drilling capacity taper: Diameter: 50 mm Max. spindle-to-table distance: 1500 mm Min. spindle-to-table distance: 320 mm Travel spindle: 310 mm KW: ??4 Volts: 400 Machine number: 869 Included: Clamping cube 1000x750x500 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Ledpfxsyqv Uko Aqvshg We look forward to your visit. Your Markus Hirsch Team

Condition: used, bore capacity in steel (diameter) 32 mm arm length 640 mm workpiece height max. 950 mm bore capacity in cast iron 50 mm threading . spindle taper MT 4 turning speeds 88-1500mm (6x) U/min Lhedpfx Ajyqvzksqvsg Max. spindle-to-table distance: 950 mm Min. spindle-to-table distance: 220 mm Quill stroke: 220 mm KW: ??1.5 Volts: 380 Machine number: 9028 Included: Clamping cube 600 x 445 x 380 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Used radial drill SASS Mod.TRM 2200 Excellent condition, fully functional. Cube supplied Maximum diameter drilling from solid cast iron 20-22 100 mm Maximum diameter drilling from solid steel R=60 80 mm Sliding quill spindle diameter 102 mm Spindle morse taper 6 Spindle vertical travel 500 mm Rotational speed 32 Ledpfoikqz Sox Aqvehg Spindle speed values with 50 Hz motor - rpm/1' 18 ÷ 1600 Automatic feeds Maximum reach from column edge to spindle axis 2230 mm Minimum and maximum drilling radius 660 ÷2505 mm Head displacement on arm 1845 mm Vertical arm displacement 1040 mm Column diameter 550 mm Column height with motor 3720 mm Base plate height 260 mm Base plate height 2490 x 1230 mm Spindle motor 11 HP Weight 9000 kg

Condition: new, column diameter: 320messurements (LxWxH): 2670 x 1120 x 2760weight approx.: 3200drilling performance: Stahl (S235JR) - 50Drilling table T-slot size: 14Drilling table T-slot spacing: 180Clamping table length: 630Clamping table height: 500connected load: 6,5Maximum spindle to drilling table distanc: 1420speed range: 44 - 1023Number of speed ranges: 12Maximum Spindle to Column Distance: 1600- Versatile application range, e.g., drilling, reaming, threading - Electrically braked motor - 24V DC electrical system and 2-channel safety circuit according to DIN EN 12717 Lodpfjwruk Iox Aqvjhg - Heavy, massive, high-quality cast construction - Wide reach thanks to horizontally adjustable machine head - Clearly arranged control panel - Smooth swivel and travel axes - Elaborately designed column swivel with optimized clamping for maximum stability and minimal clamping offset - Robust, torsion-resistant construction of the arm - Height adjustment of the arm is carried out via powerful motorized drive and lifting spindle - Gearbox of the drill head running in an oil bath - Arm guideways hardened and precision ground - Gear wheels made of chrome-nickel steel, hardened and precision ground, resulting in quieter and smoother operation - Drill head and column can be clamped or released together or separately - Right-left rotation - Massive, precise drill table, generously dimensioned - Hardened and ground worktable with parallel T-slots - Machine light - Overload protection - Thick-walled cast column ensures smooth running and stability - LED lamp - Coolant system with coolant tank in the machine base - RD 6 / RD 7 - The column is hydraulically clamped

Condition: new, column diameter: 260messurements (LxWxH): 1725 x 745 x 2550weight approx.: 1800drilling performance: Stahl (S235JR) - 42Drilling table T-slot size: 19Drilling table T-slot spacing: 171Clamping table length: 635Clamping table height: 415connected load: 4Maximum spindle to drilling table distanc: 1270speed range: 37 - 1253Number of speed ranges: 12Machine FeaturesFunction & ApplicationVersatile application range, e.g. drilling, reaming, tapping Forward and reverse rotation Drive & ControlElectrically braked motor 24V DC electrics and 2-channel safety circuit according to DIN EN 12717 Clearly arranged control panel All axes are manually clamped Structure & DesignHeavy, solid, high-quality cast construction Thick-walled cast column for high smoothness and stability Rigid, high-strength boom construction Large reach thanks to horizontally adjustable machine head Massive, precise drilling table with generous dimensions Hardened and ground clamping table with parallel T-slots Elaborately designed column swivel with optimized clamping for maximum stability and minimal clamping offset Drill head and column can be clamped or released together or separately Movement & MechanicsSmooth-running swivel and travel axes Boom height adjustment via powerful motor drive and lifting spindle Boom guideways hardened and precision-ground Drill head gearbox runs in oil bath Gear wheels made of hardened and precision-ground chrome-nickel steel, ensuring quiet and smooth operation Additional EquipmentMachine light LED lamp Overload protection Ledewrukzopfx Aqvshg Coolant system with integrated tank in the machine base Model VersionsRD 4 / RD 5

Condition: new, column diameter: 432messurements (LxWxH): 3050 x 1185 x 3050weight approx.: 5600drilling performance: Stahl (S235JR) - 70Clamping table length: 1000Clamping table height: 500connected load: 11speed range: 44 - 1023Number of speed ranges: 29 - 1575traverse path - x: 1185traverse path - y: 1000Versatile application range, e.g., drilling, reaming, threading Electrically braked motor 24V DC electrical system and 2-channel safety circuit according to DIN EN 12717 Heavy, massive, high-quality cast construction Wide reach thanks to horizontally adjustable machine head Clearly arranged control panel Smooth swivel and travel axes Elaborately designed column swivel with optimized clamping for maximum stability and minimal clamping offset Robust, torsion-resistant construction of the arm Height adjustment of the arm via powerful motorized drive and lifting spindle Drill head gearbox running in an oil bath Arm guideways hardened and precision ground Gear wheels made of chrome-nickel steel, hardened and precision ground, resulting in quieter and smoother operation Drill head and column can be clamped or released together or separately Lhodpfjwruk Uox Aqveg Right-left rotation Massive, precise drill table, generously dimensioned Hardened and ground worktable with parallel T-slots Machine light Overload protection Thick-walled cast column ensures smooth running and stability LED lamp Coolant system with coolant tank integrated in the machine base Model: RD 6 / RD 7 Column is hydraulically clamped